Professional Documents
Culture Documents
HB Hydraulic Dampers from ACE are maintenance free, self contained and sealed units. They are available with body diameters from 15 mm up to 70 mm and with stroke lengths up to 800 mm. As standard they are supplied as double acting dampers but a single acting version is also available. The travel speed is adjustable and remains constant throughout the stroke. (single acting version is controllable in one direction only, with free flow in the opposite direction.) HB Dampers follow ACEs slimline Gas Spring design. A large range of screw on mounting accessories make the HB damper very versatile and easy to install in many varied types of application. Typical applications include machine guards and lids, fire safety flaps and doors, damping oscillations of suspended loads (Power and Free Systems) etc.
Piston Rod
Main Bearing
Seals
Pressure Chamber
84
Outer Body
84
HB dampers can be mounted in any position. To adjust the travel speed pull (or push) the piston rod to its fully extended (or fully compressed) position. Whilst still pulling the rod turn it clockwise to increase damping or anti-clockwise to decrease the damping. The adjustment is multi-turn and may require several trial and error adjustments. NOTE: The internal construction results in small amount of free travel when reversing travel direction. The powder coated outer body and hard chrome plated rod provide a long lifetime.
6,1
6 thick breit
6 thick 6 breit
6,1
End Fitting
A5
Ball Kugel R R 55
10 16
6 15
A5
10 16 Hub Stroke
B5 C5
13
M5 5
8
Dimensions
Type
HB-15-25 HB-15-50 HB-15-75 HB-15-100 HB-15-150 Stroke mm 25 50 75 100 150 L Extended 90 140 190 240 340 Max. Compression Force N 800 800 800 350 300
5
B5
DIN 71802
C5
8 10 36 22 M5
6
12
D6
12
DIN 71752
6 12
Ordering Example
24
13
D6
HB-15-150-CC-M
E5
6
7
24 6
10
4,5
Type (Hydraulic Damper) Body (15 mm) Stroke (150 mm) Piston Rod End Fitting C5 Body End Fitting C5 Damping Direction (M = out stroke only) Damping options M = Damping on out stroke only P = Damping in both directions N = Damping on in stroke only X = Special model suffix
24
DIN 648
E5
12 10 30
12
13 8
30
G5
4,5
8
The end fittings are interchangeable and must be positively secured by the customer to prevent unscrewing (i.e. Loctite). For mounting accessories see page 108.
22
DIN 71805
G5
12 22
W5-15
Rod Shroud
19
L L==Stroke + 20 Hub + 20
A5
C5
HB-15
D6 E5 G5
Technical Data
ACE hydraulic dampers are self-contained and maintenance free. Adjustment: Adjustment of the damping rate is achieved by pulling (or pushing) the piston rod to its fully extended (or compressed) position. Whilst still pulling the piston rod turn it clockwise to increase damping or anti-clockwise to decrease damping. This adjustment can add a max. of 6 mm to the L dim. shown. Free travel: Construction of standard damper results in a free travel of approx 20 % of total stroke when changing travel direction. Mechanical stops: Provide mechanical stops 1 to 1.5 mm before end of each stroke direction. Mounting position: Can be mounted in any position. Operating temperature range: -20C to +80C. Operating fluid: Hydraulic oil. Material: Body: black powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. Separator piston (-T): Available as a special option to remove free travel. Also provides extension force of max. 50 N. Dimension L = 2.45 x stroke + 47 mm.
MA5 NA5 OA5 PA5 OA5 OG5 PA5 PG5 A5 MA5 NA5 NG5
85
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
85
8,1
10 breit thick
10 breit thick
8,1
End Fitting
A8
Ball Kugel R R 77
14 20
8 22
A8
14 20 Hub Stroke
L+/-L+/- 2 mm ausgefahren 2 mm extended + max 6 mmmm Verstellweg setting + max 6 for adjustment
B8
20
M8 9
13
Dimensions
Type
HB-22-50 HB-22-100 HB-22-150 HB-22-200 HB-22-250 Stroke mm 50 100 150 200 250 L Extended 150 250 350 450 550 Max. Compression Force N 1 800 1 800 1 800 1 000 1 000
8
B8
DIN 71802
C8
12 16,5 36 30 M8
8
C8
15
D8
16
Ordering Example
8 16 10
24 8
HB-22-150-DD-M
DIN 71752
D8 E8
E8
8 12
32
16
12
Type (Hydraulic Damper) Body (22 mm) Stroke (150 mm) Piston Rod End Fitting D8 Body End Fitting D8 Damping Direction (M = out stroke only) Damping Options M = Damping on out stroke only P = Damping in both directions N = Damping on in stroke only X = Special model suffix
32
DIN 648
13 36
16
20 13
36
G8
6
13
The end fittings are interchangeable and must be positively secured by the customer to prevent unscrewing (i.e. Loctite). For mounting accessories see page 109.
30
DIN 71805
G8
15 30
W8-22
Rod Shroud
28
86
A8 C8
HB-22
D8 E8 G8
Technical Data
ACE hydraulic dampers are self-contained and maintenance free. Adjustment: Adjustment of the damping rate is achieved by pulling (or pushing) the piston rod to its fully extended (or compressed) position. Whilst still pulling the piston rod turn it clockwise to increase damping and anti-clockwise to decrease damping. This adjustment can add a maximum of 6 mm to the L dimension shown. Free travel: Construction of standard damper results in a free travel of approx. 20 % of stroke. Mechanical stops: Provide mechanical stops 1 to 1.5 mm before end of each stroke direction. Mounting position: Can be mounted in any position. Operating temperature range: -20C to +80C. Operating fluid: Hydraulic oil. Material: Body: powder coated steel. Piston rod: chrome plated. End fittings: zinc plated steel. Separator piston (-T): Available as a special option to remove free travel. Also provides extension force of max. 100 N. Dimension L = 2.38 x stroke + 55 mm.
MA8 NA8 OA8 PA8 OE8 PE8 PG8 OG8 E8 ME8 NE8 NG8
86
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
8,1
10 thick breit
10 thick 10 breit
8,1
End Fitting
A8
Ball Kugel RR77
14 20
10 28
A8
14 20 Hub Stroke
B8
20
M8 9
13
Dimensions
Type
HB-28-100 HB-28-150 HB-28-200 HB-28-250 HB-28-300 HB-28-350 HB-28-400 HB-28-500 Stroke mm 100 150 200 250 300 350 400 500 L Extended 260 360 460 560 660 760 860 1 060 Max. Compression Force N 3 000 3 000 3 000 3 000 2 500 2 000 1 500 1 000
8
B8
DIN 71802
C8
12 16,5 36 30 M8
8
C8
15
D8
16
DIN 71752
8 16
D8 E8
Ordering Example
32
16
HB-28-150-DD-M
32
E8
8 12
10
24 8
12
13 36
16
20
Type (Hydraulic Damper) Body (28 mm) Stroke (150 mm) Piston Rod End Fitting D8 Body End Fitting D8 Damping Direction (M = out stroke only) Damping Options M = Damping on out stroke only P = Damping in both directions N = Damping on in stroke only X = Special model suffix The end fittings are interchangeable and must be positively secured by the customer to prevent unscrewing (i.e. Loctite). For mounting accessories see page 109.
DIN 648
36
G8
6
13
13
DIN 71805
30
G8
15 30
W8-28
Rod Shroud
32
A8
C8
HB-28
D8 E8 G8
Technical Data
ACE hydraulic dampers are self-contained and maintenance free. Adjustment: Adjustment of the damping rate is achieved by pulling (or pushing) the piston rod to its fully extended (or compressed) position. Whilst still pulling the piston rod turn it clockwise to increase damping and anti-clockwise to decrease damping. This adjustment can add a maximum of 6 mm to the L dimension shown. Free travel: Construction of the standard damper results in free travel of approx. 20 % of stroke. Mechanical stops: Provide mechanical stops 1 to 1.5 mm before end of each stroke direction. Mounting position: Can be mounted in any position. Operating temperature range: -20C to +80C. Operating fluid: Hydraulic oil. Material: Body: powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. Separator piston (-T): Available as a special option to remove free travel. Also provides extension force of max. 100 N. Dimension L = 2.35 x stroke + 60 mm.
87
MA8 NA8 OA8 PA8 OE8 OG8 PE8 PG8 E8 ME8 NE8 NG8
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
87
14,1
14 breit thick
14 thick 14 breit
14,1
End Fitting
A14
Ball Kugel RR12,5 12,5
21 40
14 40
A14
21 40 Hub Stroke
B14 C14
M14x1,5 15
30 22
Dimensions
Type
HB-40-100 HB-40-150 HB-40-200 HB-40-300 HB-40-400 HB-40-500 HB-40-600 HB-40-700 HB-40-800 Stroke mm 100 150 200 300 400 500 600 700 800 L Extended 275 375 475 675 875 1 075 1 275 1 475 1 675 Max. Compression Force N 10 000 10 000 10 000 10 000 8 000 6 000 4 000 3 000 3 000
15
B14
DIN 71802
C14
20 28
25 45 M14x1,5 36
14
D14
27
DIN 71752
14 27
D14
Ordering Example
56
26
HB-40-300-EE-N
56
16
E14
19
16
14
20
13
Type (Hydraulic Damper) Body (40 mm) Stroke (300 mm) Piston Rod End Fitting E14 Body End Fitting E14 Damping Direction (N = in stroke only) Damping Options M = Damping on out stroke only P = Damping in both directions N = Damping on in stroke only X = Special model suffix The end fittings are interchangeable and must be positively secured by the customer to prevent unscrewing (i.e. Loctite). For mounting accessories see page 110.
DIN 648
E14
18 18 57
30
57
W14-40
Rod Shroud
45
Hub + 40 L L==Stroke + 40
88
Technical Data
HB-40
A14 C14 D14 E14
ACE hydraulic dampers are self-contained and maintenance free. Adjustment: Adjustment of the damping rate is achieved by pulling (or pushing) the piston rod to its fully extended (or compressed) position. Whilst still pulling the piston rod turn it clockwise to increase or anti-clockwise to decrease. This can add 6 mm to dim. L shown. Free travel: Construction of standard damper results in a free travel of approx. 20 % of stroke when changing directions. Mechanical stops: Provide mechanical stops 1 to 1.5 mm before end of stroke in each direction. Mounting position: Can be mounted in any position. Operating temperature range: -20C to +80C (with special seals up to 120C). Operating fluid: Hydraulic oil. Material: Body: powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. Separator piston (-T): Available as a special option to remove free travel. Also provides extension force of max. 200 N. Dimension L = 2.32 x stroke + 82 mm.
88
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
NEW
35
End Fitting
B24
B24
Hub Stroke 35
70
L+/- 2 mm ausgefahren L+/- 2 mm extended + max 8mm Verstellweg + max 8 mm for adjustment setting
Dimensions
Type
D24
50
25
25 50 32 100
DIN 71752
D24
Ordering Example
HB-70-300-EE-N
E24
31
12
25
34
42
22
Type (Hydraulic Damper) Body (70 mm) Stroke (300 mm) Piston Rod End Fitting E24 Body End Fitting E24 Damping Direction (N = in stroke only) Damping Options M = Damping on out stroke only P = Damping in both directions N = Damping on in stroke only X = Special model suffix The end fittings are interchangeable and must be positively secured by the customer to prevent unscrewing (i.e. Loctite). For mounting accessories see page 110.
94
DIN 648
E24
30 30 94
40
W24-70
Rod Shroud
80
L L = Hub + + 50 = Stroke 50
Technical Data
HB-70
ACE hydraulic dampers are self-contained and maintenance free. Adjustment: Adjustment of the damping rate is achieved by pulling (or pushing) the piston rod to its fully extended (or compressed) position. Whilst still pulling the piston rod turn it clockwise to increase or anti-clockwise to decrease the damping. This can add up to 8 mm to dim. L shown. Free travel: Construction of standard damper results in a free travel of approx. 20 % of stroke when changing travel direction. Mechanical stops: Provide mechanical stops 1 to 1.5 mm before end of stroke in each direction. Mounting position: Can be mounted in any position. Operating temperature range: -40C to +80C (with special seals up to 120C). Operating fluid: Hydraulic oil. Material: Body: black powder coated steel or zinc plated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. Separator piston (-T): Available as a special option to remove free travel. Also provides extension force of max. 250 N. Increases dimension L + 150 mm.
89
D24 E24
ND24 ME24
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
89