You are on page 1of 3

Material Safety Data Sheet

EMACO BONDING AGENT


Version Revision Date BCCI - 02 15 September 2010

1. PRODUCT AND COMPANY IDENTIFICATION Product Name EMACO BONDING AGENT Manufacturer BASF Construction Chemical India Pvt. Ltd. C-68, MIDC, Thane Belapur Road, Turbhe, Navi Mumbai - 400 613 Telephone No : +91-22-41577777 Fax No : 91-22-4177766
Emergency Contact No : +91-22-67917217

2. HAZARD IDENTIFICATION May irritate eyes and skin if comes in contact 3. COMPOSITION / INFORMATION ON INGREDIENTS Chemical characterization Preparation containing copolymer based on acrylic acid esters, water and additives Hazardous ingredients None

4. FIRST AID MEASURES Eye contact


Skin contact Inhalation Ingestion First aid facilities

Flush immediately with plenty of water for at least 15 minutes. If irritation persists, get medical attention. Remove contaminated clothes immediately. Wash affected area with soap and plenty of water. Remove affected person to fresh air. If Symptoms persist obtain medical attention. If swallowed obtain medical attention. Induce vomiting only on advice of physician. Ensure availability of clean water for eye and skin wash

5. FIRE FIGHTING MEASURES Suitable Extinguish media

Combustion products

Water spray, dry extinguishing media, carbon dioxide or universal foams Contaminated extinguishing water must be disposed of in accordance with local regulations. None. Product is non-combustible.

6. ACCIDENTAL RELEASE MEASURE After spillage/leakage Wipe up with absorbent tissues, sand or cloth. Remove any spill residues with small amount of water. Dispose according to local regulations. Do not discharge product into natural waters Environmental precautions without pr-treatment. 7. HANDLING AND STORAGE Handling
No special measures required.

Page 1 of 3

Material Safety Data Sheet

EMACO BONDING AGENT


Version Revision Date BCCI - 02 15 September 2010

Fire and explosion protection Storage

No special measures required. Keep tightly sealed; store away from direct sunlight. Protect from extremes heat and cold.

8.

EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure limits Not available Engineering controls Natural ventilation is adequate under normal use conditions. Keep containers closed when not in use. Personal Protective equipment Respiratory protection Not normally required. Avoid mist Eye protection Safety goggles. Skin protection Impervious protective hand gloves or barrier cream. General protective clothing such as overalls or long pants and a long sleeve shirt or a chemical apron. Remove contaminated clothing as soon as possible. Launder thoroughly before reusing. For large spills or ponded areas impervious footwear is preferred Other Observe the usual precautions when handling chemicals. Industrial Hygiene Wash hands before breaks and after finishing work. Do not eat, drink or smoke at workplace. PHYSICAL AND CHEMICAL PROPERTIES Form Liquid Color White Odor Ammonia Change in physical state Boiling point >100 Melting point Not applicable Flash Point Not applicable Auto-ignition temperature Not applicable Thermal decomposition Not determined 1.05 Specific gravity (25) Vapor pressure, mbar Not determined 50 cP Viscosity (25) pH 6.0 to 9.0 Solubility in water Miscible
Stable under normal storage conditions. No hazardous reactions and decomposition products are formed. None known

9.

10. STABILITY AND REACTIVITY Hazardous decomposition products


Hazardous reactions

11.

INFORMATION ON TOXICITY In our experience and according to the information available to us the product is not harmful to health provided it is handled and used in accordance with given recommendations.

Page 2 of 3

Material Safety Data Sheet

EMACO BONDING AGENT


Version Revision Date BCCI - 02 15 September 2010

12.

INFORMATION ON ECOLOGICAL EFFECTS Elimination Information The product can be virtually eliminated from water by abiotic processes e.g adsorption onto activated sludge. Do not discharge product into natural water without pre-treatment. Eco-toxic effects Not known DISPOSAL If spills prevent entering sewers or storm water drains or water ways. Absorb with dry sand vermiculite or special spill absorbent. Dispose the soiled media by incineration or by landfill as permitted by local regulations. TRANSPORT Not classified as hazardous under transport regulations REGULATORTY INFORMATION The material is not subject to hazard warning label. It should be handled in accordance with industrial hygiene and practice. S Phrases
S20/21 - When using do not eat, drink or smoke S24/25 - Avoid any inhalation, contact with skin and eyes. Wear suitable protective clothing and gloves

13.

14.

15.

16.

OTHER INFORMATION The above data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

Page 3 of 3

You might also like