Professional Documents
Culture Documents
http://www.instructables.com/id/Nerf-Gun-Modifications./
Author:barnes
Computer Engineering Student at Drexel University, Intern at NextFab Studio.
http://www.instructables.com/id/Nerf-Gun-Modifications./
Image Notes 1. Small cut of foam. The glue gun is melting a small hole for the weight.
Image Notes 1. Open Gun 2. Tony Hawk sticker I put on the ground when I was 10. It came with my Tech Deck halfpipe. :)
http://www.instructables.com/id/Nerf-Gun-Modifications./
http://www.instructables.com/id/Nerf-Gun-Modifications./
Related Instructables
How to make Nerf Gun Dart the Nerf Big Bad Mod by Bow into a Big maxmaz2 Bad Sniper by solomoncrunch
How to make an Nerf Bullet that shoots Air soft BBs by spartan711
Comments
50 comments Add Comment view all 311 comments
salazam says:
Nov 12, 2010. 8:50 AM REPLY 1/2 inch is too small for mine and 5/8 is too big. I've wrapped the ends of the 1/2 inch with a cloth tape, one time around, and it works but I have to find a good balance now maybe make the tips heavier because now they warble in flight.
burning-ice says:
What is your barrel? 1/2" cpvc works great for 1/2"fbr....
salazam says:
Jan 8, 2011. 10:45 PM REPLY Maverick stock barrel are the primary weapons of choice, then they also work in the clip loading ones, but aren't as powerful. What I have is caulksaver from the Home Depot and maybe that's why the circumference is insufficient. Nov 13, 2010. 10:33 AM REPLY
HeckHawk says:
Nice gun dude ! awesome !
sonofstone says:
Oct 19, 2010. 1:37 PM REPLY are you sure about the 22 inch barrel? i just modded my supersoaker just by hotglueing on a nitefinder barrel, but the darts spin out of control, and the darts go anywhere except for the point i'm aiming at. i know thats because the barrel is too short, but isnt 10 inches long enough? thnx Aug 23, 2010. 12:35 AM REPLY another way to get some extra kick, stretch the spring that forces the piston into the barrel or replace with a stronger spring. also by using the "buzzbee toys" darts (cheaper brand) they are slightly bigger and harder darts, force them into the barrel, cock the gun pull the trigger. the dart wont come out but a nice whack on the cocking mech and these darts hurt. i got hit in the mouth and had my gums split
ghoru says:
tifrankvl says:
Sorry, but stretching the spring just weakens it.
jamesalex55 says:
Do these darts hurt more than normal darts and where can you get backer rod in the UK?
TheMadScientist says:
Aug 18, 2010. 9:57 PM REPLY cant find any record of a company referenced as K&G selling hobbyist metal products. closest i could find is a hobby specific company called K&S http://www.oakridgehobbies.com/index.php/hobby-products-tools-paints-wood-metal-plastic-hobby-supplies/metals-tubing-strip-stock-sheets-rods-brassaluminum could original poster confirm/deny weather this is the brand he was referring to?
sneakpeak123 says:
epic fail your cut is bad
Innocentassassin says:
Jun 18, 2010. 2:04 PM REPLY ihave this old toy crossbow that i got for 10 bucks and i am tryin to make a bolt action airsoft gun out of it. get back to me if u can help. i has a groove down the middle that can fit the barrel from the extender of a longshot and i was going to try to use the same mechanism as the longshot but i dont no how to fit an airsift barrel on it......
http://www.instructables.com/id/Nerf-Gun-Modifications./
NerfModder1212 says:
does it matter how long the barrel is?
VersatileHobbies says:
barrel length matters for modded water guns i recommend a 22inch barrel
weponary101 says:
the longer the more accurate u get
Aug 31, 2007. 5:02 PM REPLY Yes. Extremely strong air-powered guns such as this will benefit most from barrels about 2 feet long. The barrel should also be a loose fit on your darts, but not loose enough that they can fall out on their own. Also, you may want to open the gun up and see if there is an "Over-Pressure Release Valve," what we in the Nerf Internet Community (NIC) abbreviate as "OPRV." An easy way to tell if a gun has one is to pump air and listen for a difference in tones in the later pumps. If there is a drastic difference, then there is an OPRV, which you can plug with hot glue or epoxy once you find it. They are usually located on the pump itself, and if not then somewhere nearby.
nerfer192 says:
Nov 12, 2007. 1:13 PM REPLY oh yeah? i have the internals of an at3k modded to be a 1pump yes i said one pump 60 foot super pistolthat gives welts and rips darts as thyer comin out the brrel that only sumtimes though but it makes my unweighted stefans wobble. SUCK!
CapnTac says:
Awesome! Un-weighted stefans? WTF? They have to be waited if you want them to be of any use.
nerfer192 says:
yes i know my mom is anti bb gun so i don have bbs
CapnTac says:
Oh. You can use metal washers, too. They work pretty good.
milsorgen says:
use small rocks
Evilthingamabober says:
I have no idea what you just said
weponary101 says:
do you have a site where i can get step by step instructions on how to make this gun?
nerfer192 says:
<a rel="nofollow" href="http://www.nerfhaven.com">click here, itl help.</a><br/>
nerfer192 says:
whoops that comment was to mykaihlo
ty.tdog says:
could you please possibly post a video of this gun shooting??
VersatileHobbies says:
Jun 8, 2010. 9:04 PM REPLY go on youttube and type SS Flash Flood Nerf gun and theres a vid of a guy shooting it it is'nt this guy but the gun was modded similarly
http://www.instructables.com/id/Nerf-Gun-Modifications./
deadpyro says:
Nov 8, 2008. 11:18 AM REPLY Would the kind of water gun that shoots water every pump work?Appreciated if you have an answer because i want to get into Nerf.
VersatileHobbies says:
Jun 8, 2010. 9:02 PM REPLY any water gun that is a supersoaker product dat requires pumping and then puling the trigger will work cut of the nozzle and glue on a barrel or coupler =)
geodez says:
super soakers?
nerfman44 says:
Nov 14, 2008. 12:21 PM REPLY Uh ya i guesse it could my friend has the one you are talking about and it is a little bit worse then the other ones that you pump and then shoot. but it will work over all i helped my friend with that and he loves it. oh and the dude below my comment it will shoot water.
AJBrawlLvr says:
Does it work w/ a SS max-d 5000? thats the type I have. also-what diameter should the barrel be?
VersatileHobbies says:
Jun 8, 2010. 9:00 PM REPLY any gun from the supersoaker that requires u to pump it then pull the trigger will work cut of the nozzle that restricts air flow and glue a 1/2 inch diameter barrel or coupler for interchangeble barrels and longer barrels for water guns work the best i would recommend a 22inch long barrel =)
zwhipple says:
7/16th inch brass tubing works great for stefans
travis_bickle says:
Apr 16, 2010. 6:35 PM REPLY 7/16 is not an available size of brass tubing. what you must have meant is 17/32 (works for stock darts, and very narrow fbr) or 9/16. ready to help as always :)
benbarrett says:
also...if i cant find unhallow fbr what should i do?
benbarrett says:
Jun 6, 2010. 3:48 PM REPLY if you use the unhallow fbr do you need to pull out the orange pin thing in the gun, like in the maverick for instance. because you cant put the bullet if that orange plastic is in the place where you put the bullet. please answer... Jun 1, 2010. 5:04 PM REPLY or you just ripp off the head of the dart and tape it in to the barrel and stick the bb in there. and it wont fall out to so you can have it loaded all the time. and plus this way your not hurting your gun.
mattbomb says:
billybenj says:
What is the duck tape for? just to hold it in place?
mattxc says:
May 22, 2010. 7:40 PM REPLY Looks like the duct tape is to keep the barrel from moving around when you put the case back on the gun, if that makes sense. The plastic is narrower than the hole in the casing, so the duct tape just makes it bigger and keeps it from going crooked, I believe
billybenj says:
May 22, 2010. 8:06 PM REPLY yeah that makes sense, i just sanded off some of the inside of the orange ring that was on the old barrel and it fits perfectly though.
rocketpro says:
Wait, I've seen this before. How do keep the BB's from falling out of the Barrel?
http://www.instructables.com/id/Nerf-Gun-Modifications./
sonofspikerr says:
Got my nitefinder for $8...Go Walmart!
octo137 says:
I went to wal-mart and they were on sale for $5 so i just got 3 whil i can :)
mod586 says:
does any one how long your suppose to cut the foam to to work the best?
travis_bickle says:
i've experimented with all different lengths, and 1 1/2" seems to be about best for range and accuracy.
clemsonguy1125 says:
I cut them the length of a double a battery
barnes says:
I usually cut them about an inch or 2. Not the length of an original dart, just a little more then half that size.
http://www.instructables.com/id/Nerf-Gun-Modifications./