Professional Documents
Culture Documents
Mechanical Flow Switch for liquids or gaseous media, with spring-supported piston and magnetic triggering of a reed switch. Rugged construction in brass with additional viscosity compensation. viscosity compensation 1-200mm/s good repeatabilty dirt-resistance high switch capability hermetic separation of mechanical and electrical component exact setting of switch via scale + gear
1.1.
HD1KV.
HD1KV-020GM025
TECHNICAL DATA
G Type PN bar Qmax. recom. l/min oil 1-200mm/s adjustable range l/min oil 1-200mm/s AF mm
40 40 40 40 40
X mm
15 15 15 18 18
weight kg
1.7 1.7 1.6 1.6 1.5
0.5 - 5 G 1/4 HD1KV-008GM005 200 10 0.5 - 5 2 - 12 G 3/8 HD1KV-010GM... 200 20 2 - 12 5 - 25 G 1/2 HD1KV-015GM... 200 40 5 - 25 10 - 40 G 3/4 HD1KV-020GM... 200 60 10 - 40 15 - 60 G1 HD1KV-025GM... 200 80 Adjustable range is indicated for horizontally decreasing flow. Calibration with oil ISO VG64 - 80mm/s. viscosity stability tolerance media temperature average pressure loss hysteresis brass 3% 5% of full scale max. 120 C 0.5 bar at Qmax. depending on switch value value minimum 0.5 l/min.
50
100
150
200 mm/s
Within the mechanical viscosity compensation the flow velocity in the piston area is increased sharply with the effect that the viscosity impact declines and the metering results stabilise even with changing viscosity ratings.
MATERIALS
body metering unit spring magnet seal switch head brass Ms58 nickel plated brass Ms58 stainless steel 1.4310 neodymium NBR polycarbonate 27.09.2010 page 1 of 3
HONSBERG Instruments GmbH Tenter Weg 2-8 42897 Remscheid Germany Phone +49(0)2191 9672-0 Fax +49(0)2191 9672-40 www.honsberg.com info@honsberg.com
1.1.
HD1KV.
diode red/green wiring 0.347
green red
MOUNTING POSITION
Installation position may influence switch value.
METERING SUBSTANCES
oil
gas/air
TYPENNOMENKLATUR HD1KV
HD1KV H1V OZ008 010 015 020 025 G M K 005 012 025 040 060 A E Programme option BASIC Special option VARIO
For combination see table "technical data" basic type specification Flow Switch Flow Indicator without metering unit Flow Switch with lateral flow metering unit Flow Switch with front flow metering unit DN 8 - G1/4 DN 10 - G3/8 DN 15 - G1/2 DN 20 - G3/4 DN 25 - G1 female thread brass stainless steel 0.5 - 5 l/min 2 - 12 l/min 5 - 25 l/min 10 - 40 l/min 15 - 60 l/min switch ATEX (produkt information 92.1.H1-1) connection by local electronic (e.g. omni-HD1KV) wiring 0.342 wiring 0.208 - diode red integrated in plug DIN 43650-A wiring 0.347 - diode red/green integrated in plug DIN 43650-A high pressure PN 500 incremented scale switch head metal flat switch head plastic selected hysteresis / vibration-proof rhodium contact contact for locking plug M 12x1, 4-pole two to four independent switch heads temperature control 30-95 C setting / adjustable ranges for oil or gas
008 G M 005
adjustable range
nominal diameter
All technical changes reserved BASIC Standard BASIC Programme option VARIO Special option PLUS Accessories not recommendable 27.09.2010 page 2 of 3
HONSBERG Instruments GmbH Tenter Weg 2-8 42897 Remscheid Germany Phone +49(0)2191 9672-0 Fax +49(0)2191 9672-40 www.honsberg.com info@honsberg.com
piston / inline design HD1KVO- Flow Switch with lateral flow metering unit
1.1.
HD1KV.
The metering range is indicated for horizontally increasing flow protection class IP 60 additional weight 0.1kg
The metering range is indicated for horizontally increasing flow media temperature max. 70 C protection class IP 40 additional weight 0.1kg
switch head metal or flat switch head plastic switch head ATEX
omni-HD1KV 2xNPN and PNP switch point 4(0)..20mA ouput graphical LCD display with flashing LED, program ring
All technical changes reserved BASIC Standard BASIC Programme option VARIO Special option PLUS Accessories not recommendable 27.09.2010 page 3 of 3
HONSBERG Instruments GmbH Tenter Weg 2-8 42897 Remscheid Germany Phone +49(0)2191 9672-0 Fax +49(0)2191 9672-40 www.honsberg.com info@honsberg.com