Professional Documents
Culture Documents
Technical Information
Standards Overview
Standards Overview
Power-One refer data to international standards for assuring world-wide common understanding. IEC and CISPR standards will therefore be applied in the first instance. For practical reasons other standards will be used for proper product specification, whereby EN (European Standards), UL and MIL standards are applied. Important note: The IEC publication numbers have changed as of 1997. All new IEC publications and parts, as well as editions and revisions will be issued with a designation in the 60000 series. It is necessary to add 60000 to the existing base number. Renumbering has taken place, but publications printed before 1997 still carry the old series of numbers. However the new numbers will appear in all bibliographic references. Therefore we have amended all IEC references to the new system in the Power-One Data Book 98.
EMC Standards
Table 1: Generic EMC standards
Previous no. EN 50081-1 EN 50081-2 EN 50082-1 EN 50082-2 Present no. EN 50081-1 EN 50081-2 EN 50082-1 (Will be replaced by IEC/EN 61000-6-1.) EN 50082-2 (Will be replaced by IEC/EN 61000-6-2.) CISPR/IEC 61000-6-3 IEC 61000-6-4 Title (present; partially abbreviated) and remarks Generic emission standard Residential, commercial and light industry Generic emission standard Industrial environment Generic immunity standard Residential, commercial and light industry Generic immunity standard Industrial environment Generic standards Emission standard for residential, commercial and light industrial environments Generic standards Emission standard for industrial environments
IEC 801-4 (1988) IEC 801-5 (draft) ENV 50142 IEC 801-6 (draft) ENV 50141 IEC/EN 61000-4-8 IEC/EN 61000-4-9 IEC/EN 61000-4-10 IEC/EN 61000-4-11 IEC/EN 61000-4-12
Edition 5/6.2000
1/3
Technical Information
Standards Overview
Safety Publications
Table 4: Basic safety publications
Previous no. IEC 664-1 Present no. IEC 60664-1 Title (present; partially abbreviated) and remarks Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
IEC 950
IEC/EN 60950 UL 1950 = CAN/CSA C22.2 No. 950 IEC/EN 61010-1 EN 41003 IEC 61558-1 EN 50178
Safety requirements for electrical equipment for measurement, control and laboratory use General requirements Particular safety requirements for equipment to be connected to telecommunication networks Safety of power transformers, power supply units and similar General requirements and tests Electronic equipment for use in power installations
Edition 5/6.2000
2/3
Technical Information
Standards Overview
Title (present; partially abbreviated) and remarks Stabilised power supplies, d.c. output Terms and definitions Stabilised power supplies, d.c. output Rating and performance Stabilised power supplies, d.c. output Reference levels and measurement of conducted electromagnetic interference Stabilised power supplies, d.c. output Tests other than radio-frequency interference Stabilised power supplies, d.c. output Measurement of the magnetic component of the reactive near field Low-voltage power supply devices, d.c. output Performance characteristics and safety requirements Power units other than class 2
IEC 60478-3 (Will be replaced by IEC 61204-3.) IEC 60478-4 IEC 60478-5 IEC/EN 61204 UL 1012
Edition 5/6.2000
3/3