Professional Documents
Culture Documents
Features Benefits
18, 11, 10, 9.4 and 8mm Standard DIN 43650 Connector Connects to all DIN Standard
and Device Platforms Solenoid Pressure Switches
24V AC/DC, 115V AC/DC and 230V AC/DC Ratings Available Supports the Widest Variety of
Control Voltages
Circuit Adapters For addition of Electrical Protection and LED Power Indication to Existing
DIN 43650 Installations
Features Benefits
• Installs between existing valve • Quick addition of LED and/or surge
and DIN connector protection to existing installations
• Wide choice of surge protection • Provides ability to closely match
circuitry circuit with application, minimizing
electrical noise occurrences, while
protecting your solenoid coils
DIN 43650 Bases Add the DIN 43650 Connection Interface to Your Devices for Quick-
Disconnect Capabilities
Features Benefits
• Mounts directly onto coil or enclosure • Easily integrate the DIN 43650
interface into your device
• Wide array of configurations available • Choose the correct shape to fit
your devices
Electronic Plug-In Modules Timers, Proportional Valve Control, Amplifier & Power Output Interfaces at
the Valve Level
Features Benefits
Features Benefits
18, 11, 10, 9.4 and 8mm Standard DIN 43650 Connector Connects to all DIN Standard
and Device Platforms Solenoid Pressure Switches
24V AC/DC, 115V AC/DC and 230V AC/DC Ratings Available Supports the Widest Variety of
Control Voltages
DIN Field Field Attachable Units Allow ‘on the spot’ Wiring of Your DIN 43650 Enabled
Attachable Units Devices, Providing You a Quick-Disconnect Feature for Your Valves and other
Devices.
Features Benefits
• Installs in the field • Flexibility to use any cable and ability to
cut to any length on the spot
• Wide circuitry choices available • Choose the most cost-effective circuit for
your application
• LED, provides... • Status Indication
• Surge Protection... • Reduce effects of noise & spikes, protect coils
• Rectifiers... • Drive DC coils w/AC circuits
DIN Molded Molded DIN 43650 Provides a Robust Connector and Pre-wired Cable, Saving
Single-ended Cords You Valuable Installation Time, While Eliminating Costly Troubleshooting
Encountered with Field Attachable Units.
Features Benefits
• Fully-integrated cable, DIN and • No need to field wire, saving installation
head assembly head assembly time and eliminating
wiring errors
• Wide choice of circuitry, including • Choose the most cost-effective solution
LEDs, surge protection & rectifiers for your application
• 100% computerized DIN testing • Quality performance assurance
• Integrated white marking label • Easy circuit identification
DIN Molded Brad Harrison® and mPm™ Have Combined to Offer You Two Performance
Double-ended Corsets Leaders in One Solution. This Joint Endeavor Offers You Innovative Machine
Connectivity Options.
Features Benefits
• Available with Micro-Change® & • Directly connect to Brad Harrison®
Mini-Change® Connectors Multi-port Interconnection System for
“Plug & Play” of Outputs & Inputs
• Varistor circuit protection (VDR) • Efficiently protects coils from
24V AC/DC to 230V AC/DC induced high-voltage conditions
mPm™ DIN 43650 FIELD ATTACHABLE CONNECTORS
Dimensions (in mm)
Series Poles Height Entry Series Poles Height Entry
C182 2P+G 27mm Side S182 2P+G 27mm Side
18mm DIN C183 3P+G 27mm Side S532 2P+G 34mm Side
C812 2P+G 34mm Side S113 3P+G 38mm Side
Form A C813 3P+G 34mm Side C402 2P+G 27mm Top
C403 3P+G 27mm Top
Face View Side Entry Top Entry
S622 07 T A1 D 4 Gasket
1 = Profile, nitrile
2 = Flat, nitrile
Connector Series 3 = Profile, silicon
Circuitry
18mm S182, S532 Cable Entry Size 4 = Flat, silicon
S113 See selection chart on
11mm S022, S542 07 = PG7 Avail. on S022,
this spread (below)
S542, S622, S192, S052
10mm S622
9.4mm S192 Avail. on S182,
Connector Color LED Color & Voltage
09 = PG9: S532, S113, S022,
8mm S052 S542, S622 T = Transparent Red LED Green LED Yellow LED
G = Gray 2= 24V B = 24V H = 24V
11 = PG11: Avail.on S182, N = Black 4 = 115V D = 115V L = 115V
S582, S113
5 = 230V E = 230V M = 230V
13 = 1/2”-NPT: Avail. on
S182, S532
DO EO SO S1 RO R2 QO
Varistor (VDR) Blocking diode Bipolar LED + Suppressor Full-wave recti- LED, VDR + Red/green LED
only to protect protects device transil sup- transil only for fier + VDR for full-wave recti- shows status
supply and from inductive pressor for fast overvolt surge protec- fier. Drives DC of switch posi-
switch from voltage spikes fast overvolt blocking from tion. Drives DC coils on AC tion. Used for
inductive volt- (DC circuits blocking from highly induc- coils on AC control circuits level and pres-
age spikes only) highly induc- tive loads control circuits sure switches
tive loads
S182, E452, S182, E452, S182*, E452, S182, S532, S532*, E452, S113 E453
S022, E462, S022, E462, S062*, E462, S022, S542 S542*, E462,
S622, E472, S622, E472, S622*, E472, S622 E472
S192, E392, S192 E392, E392,
S052, E492 E492 E492
mPm™ DIN 43650 MOLDED CONNECTORS
Part Number Matrix for mPm DIN 43650 Cables
E452 N 300 1 2 S0 H
LED Color & Voltage
Circuitry Red LED Green LED Yellow LED
00 = No circuits 2 = 24V B = 24V H = 24V
Connector Series 4 = 115V D = 115V L = 115V
XX = Other circuits,
E312, E313, (see below, left) 5 = 230V E = 230V M = 230V
18mm
E452, E453
11mm E332, E462
10mm E082, E472 Length Ground Location Gasket
E332, E333, 100 = 1 Meter 1 = Dual H6/H12 1 = Profile, nitrile
9.4mm
E392 300 = 3 Meters 2 = H12 2 = Flat, nitrile
E432, E333, 500 = 5 Meters 6 = H6 3 = Profile, silicone
8mm
E432 10k = 10 Meters 4 = Flat, silicone
Part Number Matrix for Cables with mPm DIN 43650 and Brad Harrison Connectors
Cable
A23 = Black PVC 18/3 18, 11, 10mm
E12 = Black PVC 20/3 9.4 & 8mm
P12 = Black PUR 20/3 18, 11, 10, 9.4 & 8mm
Special Wiring A06 = Yellow PVC with UL and CSA
“0” is Default B08 = Yellow PUR with UL and CSA
Number of Poles
3 for Mini-Change Second End Body Style
0 = Micro-Change® Male Straight, H12 Ground
5 for Micro-Change
1 = Micro-Change® Male Straight, H6 Ground
2 = Micro-Change® Male 90°, H12 Ground
Second End of Cable 3 = Micro-Change® Male 90°, H6 Ground
1 = Mini-Change connector 4 = Mini-Change® Male Straight, H12 Ground
8 = Single key Micro-Change connector (M12) 5 = Mini-Change® Male Straight, H6 Ground
6 = Mini-Change® Male 90°, H12 Ground
7 = Mini-Change® Male 90°, H6 Ground
DIN Body Style
D = 10mm DIN Form B (2P + G) Voltage/Circuitry
E = 18mm DIN Form A (2P + G) B = 24V AC/DC, C4 circuit, yellow LED & VDR suppression
F = 11mm industry standard B (2P + G) D = 115V AC/DC, C4 circuit, yellow LED & VDR suppression
G = 9.4mm industry standard C (2P + G) S = 230V AC/DC, C4 circuit, yellow LED & VDR suppression
H = 8mm DIN Form C (2P + G) O = 24-250V AC/DC without LED & VDR suppression
Dimensions (in mm)
Series Poles Entry
E452 2P+G Side
18mm DIN E453 3P+G Side
E312 2P+G Top
Form A E313 3P+G Top
Series Poles
9.4mm E332 2P+G
E333 3P+G
Industry E392 2P+G
Standard C
Dual Ground Single Ground Side Entry
Series Poles
E432 2P+G
8mm DIN E433 3P+G
E492 2P+G
Form C
Dual Ground Single Ground Side Entry
Micro-
Change
Male Plug 90°
Straight
Mini-
Change
Male Plug Straight
90°
Technical Specifications
Mechanical: Electrical: Environmental:
Connector Material: Voltage: Per Circuit or 250V AC/DC Protection: IP65
DIN: Glass Reinforced Polypropylene Amps: 5A w/#18 AWG Cable Temperature: -13° to +167°F
Mini/Micro-Change: PVC 3A w/#20 AWG Cable (-25° to +75°C)
Contact Material: Cable Gauge: PUR: 20AWG (all) Certifications: Spacing to VDE0110
DIN: Silver-plated Brass PVC: 18AWG (18, 11, 10mm);
Mini/Micro-Change: Gold-plated Brass 20AWG (9.4, 8mm)
Strain Relief: 35lbs. minimum