Professional Documents
Culture Documents
SUPRA
Supra 4XX MICRO configuration
Description
Soft 3.31 TV OFF OFF OFF OFF GLOW TIME DI Engine long glow cycle Indicates to the control which engine is in the system and which glow time should be TV Engine short glow cycle DISCHARGE SENSOR CDT not used Indicates to the control if the DISCHARGE sensor is installed CDT used HIGH SETPOINT 30c (86F) Max. Set point Indicates maximum Set Point allowed 32c (90F) Max. Set point HEAT LOCKOUT OVERRIDE (Truck unit) Heat lockout on -12c (10F) Indicates to the control if the heat lockout is overridden Heat lockout off MOP MOP disabled Indicates status of MOP control MOP enabled TRUCK UNIT Trailer unit Indicates to the control if the system has been selected for truck operation Truck unit HIGH SPEED OVERRIDE High speed start Indicates to the control if lock in high speed start Low speed start ELECTRIC FAN Belt driven fan Indicates to the control if electric fans are being used Electrical fan motors OUT-OF-RANGE SHUT DOWN Out of range alarm only Indicates if main compartment out-of-range alarm shuts unit down after 45min. Out of range alarm and unit shut down TRUCK AUTO-RESTART OPTION No auto restart Indicates if diesel restart after AC power loss function is active Auto restart active if FN6=Time start FUNCTIONAL PARAMETERS (KEYPAD) LOCKOUT OPTION Functions normal Allow or lockout certain any changes of the functional parameter from keypad Functions locked HP-62 MOP OPTION MOP parameter HP 62 option Use either normal or HP-62 MOP parameters Active HEAT ONLY UNIT OPERATION OPTION Normal cool / heat / defrost operation Converts unit to a "Heat only" unit Heat only operation (Solara) INVERTABLE MULTI TEMP Not active Indicates to the control if reversible multi temp control is active Reversible multi-temp active DIESEL / ELECTRIC STANDBY (Truck unit) Truck with Diesel & electrical standby Indicates to the control if the truck is diesel only Truck diesel only SHUNT DOWN WITH ALTERNATOR AUX ALARM Alt aux alarm only Indicates if alternator AUX alarm shuts unit down in diesel mode Alt aux alarm & unit shut down ULTRA FREEZE 1 OPERATION Disable Ultra freeze 1 Indicates to the control if UFZ1 operation can run Enable Ultra freeze 1 LOW REFRIGERANT TEST Disable low refrigerrant test Indicates to the control if low refrigerant test is enable Enable low refrigerrant test SIROCCO UNIT Supra unit Indicates if the unit is Sirocco unit Sirocco unit UNITS SELECTION LOCK OPTION Metric unit or english metric is not locked Indicates to the control if the units functional parameter is locked Unit selection is locked FROZEN MODE PRIORITY LOGIC OPTION Frozen priority not active Enables frozen priority logic Active NOT CURRENTLY ASSIGNED Not used Not used SET POINT LOCK Set Point is not locked Indicates if the change of the Set Point is locked Set Point is locked WT SENSOR ALARM (Truck unit) WT sensor alarm only Indicates if WT sensor alarm shuts unit down WT sensor alarm & unit shut down Not used DI TV OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF
CNF1: choix(DI/TV) CNF2 : choix (ON/OFF) CNF3 : choix (ON/OFF) CNF4 : choix (ON/OFF) CNF5 : choix (ON/OFF) CNF6 : choix (ON/OFF) CNF7 : choix (ON/OFF) CNF8 : choix (ON/OFF) CNF9 : choix (ON/OFF) CNF10 : choix (ON/OFF) CNF11 : choix (ON/OFF) CNF12 : choix (ON/OFF) CNF13 : choix (ON/OFF) CNF14 : choix (ON/OFF) CNF15 : choix (ON/OFF) CNF16 : choix (ON/OFF) CNF 17 : choix (ON/OFF) CNF 18 : choix (ON/OFF) CNF 19 : choix (ON/OFF) CNF 20 : choix (ON/OFF) CNF 21 : choix (ON/OFF) CNF 22 : choix (ON/OFF) CNF 23 : choix (ON/OFF) CNF 24 : choix (ON/OFF)
ON OFF
OFF
ON OFF
OFF
ON OFF
OFF
ON OFF
OFF
ON OFF ON
ON ON ON OFF ON ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 FN9 FN10 FN11 Affichage display Manuel glow override Alarm reset
Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 A/B PROBE choice A=Rem/B=Sup F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 2SET Set point adjustment 2CP 3SET Set point adjustment 3CP Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C T Range choix : CODES OU ENGLISH choice NORM / ADD CLR/RST
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
Micro parameters 3h 3h OFF=Norm air OFF=Norm air 20 mn 20 mn 7 mn 7 mn A=Rem probe A=Rem probe deg C deg C OFF=Temp strt OFF=Temp strt STD=0 STD=0 Sans Sans Sans Sans On = Auto OP On = Auto OP C C English English Norm Glow Norm Glow CLR CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
Update 22/02/2008
SUPRA MT
Description MICRO configuration Soft CNF1: choix(DI/TV) CNF2 : choix (ON/OFF) CNF3 : choix (ON/OFF) CNF4 : choix (ON/OFF) CNF5 : choix (ON/OFF) CNF6 : choix (ON/OFF) CNF7 : choix (ON/OFF) CNF8 : choix (ON/OFF) CNF9 : choix (ON/OFF) CNF10 : choix (ON/OFF) CNF11 : choix (ON/OFF) CNF12 : choix (ON/OFF) CNF13 : choix (ON/OFF) CNF14 : choix (ON/OFF) CNF15 : choix (ON/OFF) CNF16 : choix (ON/OFF) CNF17 to CNF32 : choix (ON/OFF) DI TV OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON DI Engine long glow cycle TV Engine short glow cycle CDT not used CDT used 30c (86F) Max. Set point 32c (90F) Max. Set point Heat lockout on -12c (10F) Heat lockout off (trailor units) Frozen priority not active Active Trailer unit Truck unit Low speed start High speed start Belt driven fan Electrical fan motors Out of range alarm not shut down Out of range alarm and unit shut down No auto restart Auto restart active if FN5=Time start Functions normal Functions locked Low Oil Level Alarm Active Disable low refrigerant test Enable low refrigerant test Not active Not active Alt aux alarm only Alt aux alarm & unit shut down 4.05 TV ON OFF OFF 4.05 TV ON OFF OFF 4.05 TV ON OFF OFF 4.05 TV ON OFF OFF 4.05 TV OFF OFF OFF 4.05 TV ON OFF OFF 4.05 TV ON OFF OFF R90U R90 S750MT OASIS 250MT S850MT 950MT 950UMT
ON ON OFF
ON ON OFF
ON ON OFF
ON ON OFF
ON ON OFF
ON ON OFF
ON ON OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 Affichage display Manuel glow override Alarm reset
Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C CODES OR ENGLISH Display choice NORM / ADD CLR/RST
Micro parameters 3H 3H OFF=Norm air OFF=Norm air 20 mn 20 mn 7 mn 7 mn Deg C Deg C OFF=temp strt OFF=temp strt STD=0 STD=0 ON=Auto OP ON=Auto OP C C English English Norm Glow Norm Glow CLR CLR
3H OFF=Norm air 10 mn 7 mn Deg C OFF=temp strt STD=0 ON=Auto OP C English Norm Glow CLR
3H OFF=Norm air 10 mn 7 mn Deg C OFF=temp strt STD=0 ON=Auto OP C English Norm Glow CLR
3H OFF=Norm air 10 mn 7 mn Deg C OFF=temp strt -5 ON=Auto OP C English Norm Glow CLR
3H OFF=Norm air 10 mn 7 mn Deg C OFF=temp strt STD=0 ON=Auto OP C English Norm Glow CLR
3H OFF=Norm air 20 mn 7 mn Deg C OFF=temp strt STD=0 ON=Auto OP C English Norm Glow CLR
Update 22/02/2008
UNDERMOUNT
Supra 944U MICRO configuration Supra 988U 3.31 TV ON OFF OFF Supra 950U 3.31 TV ON OFF OFF Supra 850U 3.31 TV OFF OFF OFF OFF ON ON OFF ON ON OFF ON ON OFF ON OFF
Description
Soft 3.31 TV ON OFF OFF GLOW TIME Indicates to the control which engine is in the system and which glow time should be DISCHARGE SENSOR Indicates to the control if the DISCHARGE sensor is installed HIGH SETPOINT Indicates maximum Set Point allowed HEAT LOCKOUT OVERRIDE (Truck unit) Indicates to the control if the heat lockout is overridden MOP Indicates status of MOP control TRUCK UNIT Indicates to the control if the system has been selected for truck operation HIGH SPEED OVERRIDE Indicates to the control if lock in high speed start ELECTRIC FAN Indicates to the control if electric fans are being used OUT-OF-RANGE SHUT DOWN Indicates if main compartment out-of-range alarm shuts unit down after 45min TRUCK AUTO-RESTART OPTION Indicates if diesel restart after AC power loss function is active FUNCTIONAL PARAMETERS (KEYPAD) LOCKOUT OPTION Allow or lockout certain any changes of the functional parameter from keypad HP-62 MOP OPTION Use either normal or HP-62 MOP parameters HEAT ONLY UNIT OPERATION OPTION Converts unit to a "Heat only" unit INVERTABLE MULTI TEMP Indicates to the control if reversible multi temp control is active DIESEL / ELECTRIC STANDBY (Truck unit) Indicates to the control if the truck is diesel only SHUNT DOWN WITH ALTERNATOR AUX ALARM Indicates if alternator AUX alarm shuts unit down in diesel mode ULTRA FREEZE 1 OPERATION Indicates to the control if UFZ1 operation can run LOW REFRIGERANT TEST Indicates to the control if low refrigerant test is enable SIROCCO UNIT Indicates if the unit is Sirocco unit UNITS SELECTION LOCK OPTION Indicates to the control if the units functional parameter is locked FROZEN MODE PRIORITY LOGIC OPTION Enables frozen priority logic NOT CURRENTLY ASSIGNED DI Engine long glow cycle TV Engine short glow cycle CDT not used CDT used 30c (86F) Max. Set point 32c (90F) Max. Set point Heat lockout on -12c (10F) Heat lockout off MOP disabled MOP enabled Trailer unit Truck unit High speed start Low speed start Belt driven fan Electrical fan motors Out of range alarm only Out of range alarm and unit shut down No auto restart Auto restart active if FN6=Time start Functions normal Functions locked MOP parameter HP 62 option Active Normal cool / heat / defrost operation Heat only operation (Solara) Not active Reversible multi-temp active Truck with Diesel & electrical standby Truck diesel only Alt aux alarm only Alt aux alarm & unit shut down Disable Ultra freeze 1 Enable Ultra freeze 1 Disable low refrigerrant test Enable low refrigerrant test Supra unit Sirocco unit Metric unit or english metric is not locked Unit selection is locked Frozen priority not active Active Not used Not used Set Point is not locked Set Point is locked WT sensor alarm only WT sensor alarm & unit shut down OFF Micro parameters Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 A/B PROBE choice A=Rem/B=Sup F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 2SET Set point adjustment 2CP 3SET Set point adjustment 3CP Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C T Range choix : CODES OU ENGLISH choice NORM / ADD CLR/RST DI TV OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON Not used
CNF1: choix(DI/TV) CNF2 : choix (ON/OFF) CNF3 : choix (ON/OFF) CNF4 : choix (ON/OFF) CNF5 : choix (ON/OFF) CNF6 : choix (ON/OFF) CNF7 : choix (ON/OFF) CNF8 : choix (ON/OFF) CNF9 : choix (ON/OFF) CNF10 : choix (ON/OFF) CNF11 : choix (ON/OFF) CNF12 : choix (ON/OFF) CNF13 : choix (ON/OFF) CNF14 : choix (ON/OFF) CNF15 : choix (ON/OFF) CNF16 : choix (ON/OFF) CNF 17 : choix (ON/OFF) CNF18 : choix (ON/OFF) CNF19 : choix (ON/OFF) CNF 20 : choix (ON/OFF) CNF 21 : choix (ON/OFF) CNF 22 : choix (ON/OFF) CNF 23 : choix (ON/OFF)
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
SET POINT LOCK Indicates if the change of the Set Point is locked WT SENSOR ALARM (Truck unit) CNF 24 : choix (ON/OFF) Indicates if WT sensor alarm shuts unit down
ON OFF
ON OFF
ON OFF
ON OFF
FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 FN9 FN10 FN11 Affichage display Manuel glow override Alarm reset
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
3h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
6h OFF=Norm air 20 mn 7 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow CLR
Update 22/02/2008
MAXIMA
MICRO configuration GLOW TIME CNF1: choix(DI/TV) Indicates to the control which engine is in the system and which glow time should be DISCHARGE SENSOR CNF2 : choix (ON/OFF) Indicates to the control if the DISCHARGE sensor is installed HIGH SETPOINT CNF3 : choix (ON/OFF) Indicates maximum Set Point allowed HEAT LOCKOUT OVERRIDE (Maxima MT Only) CNF4 : choix (ON/OFF) Indicates to the control if the heat lockout is overridden MOP CNF5 : choix (ON/OFF) Indicates status of MOP control TRUCK UNIT CNF6 : choix (ON/OFF) Indicates to the control if the system has been selected for truck operation HIGH SPEED OVERRIDE CNF7 : choix (ON/OFF) Indicates to the control if the low speed coolant check logic is enabled ELECTRIC FAN CNF8 : choix (ON/OFF) Indicates to the control if electric fans are being used OUT-OF-RANGE SHUT DOWN CNF9 : choix (ON/OFF) Indicates if main compartment out-of-range alarm shuts unit down after 45min. NOT ASSIGNED FOR TRAILER CNF10 : choix (ON/OFF) Not used FUNCTIONAL PARAMETERS (KEYPAD) LOCKOUT OPTION CNF11 : choix (ON/OFF) Allow or lockout certain any changes of the functional parameter from keypad HP-62 MOP OPTION CNF12 : choix (ON/OFF) Use either normal or HP-62 MOP parameters HEAT ONLY UNIT OPERATION OPTION CNF13 : choix (ON/OFF) Converts unit to a "Heat only" unit INVERTABLE MULTI TEMP CNF14 : choix (ON/OFF) Indicates to the control if reversible multi temp control is active ULTRA FRESH II OPTION (Trailer unit) CNF15 : choix (ON/OFF) Indicates to the control if the Ultra Fresh II temperature control is enable SHUNT DOWN WITH ALTERNATOR AUX ALARM CNF16 : choix (ON/OFF) Indicates if alternator AUX alarm shuts unit down in diesel mode ULTRA FREEZE 1 OPERATION CNF 17 : choix (ON/OFF) Indicates to the control if UFZ1 operation can run LOW REFRIGERANT TEST CNF 18 : choix (ON/OFF) Indicates to the control if low refrigerant test is enable NOT ASSIGNED FOR TRAILER CNF 19 : choix (ON/OFF) Not used UNITS SELECTION LOCK OPTION CNF 20 : choix (ON/OFF) Indicates to the control if the units functional parameter is locked FROZEN MODE PRIORITY LOGIC OPTION CNF 21 : choix (ON/OFF) Enables frozen priority logic NOT CURRENTLY ASSIGNED CNF 22 : choix (ON/OFF) Not used SET POINT LOCK CNF 23 : choix (ON/OFF) Indicates if the change of the Set Point is locked NOT ASSIGNED FOR TRAILER CNF 24 : choix (ON/OFF) Not used ON Set Point is locked Not used ON OFF OFF OFF OFF OFF OFF Set Point is not locked ON OFF OFF OFF OFF OFF OFF Active Not used ON OFF OFF ON OFF OFF OFF ON OFF Unit selection is locked Frozen priority not active ON OFF ON METRIC OFF ON METRIC ON METRIC OFF ON METRIC OFF ON METRIC Metric unit or english metric is not locked ON OFF Enable low refrigerrant test Not used ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF Enable Ultra freeze 1 Disable low refrigerrant test ON OFF Alt aux alarm & unit shut down Disable Ultra freeze 1 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF Logic enabled Alt aux alarm only ON OFF Reversible multi-temp active Logic disabled ON OFF OFF ON OFF OFF OFF ON OFF Heat only operation (Solara) Not active ON OFF OFF OFF OFF Active Normal cool / heat / defrost operation ON OFF OFF OFF OFF OFF OFF Functions locked MOP parameter HP 62 option ON OFF OFF OFF OFF OFF OFF Functions normal ON OFF OFF OFF OFF OFF OFF Out of range alarm and unit shut down Not used ON OFF OFF OFF OFF OFF OFF Electrical fan motors Out of range alarm only ON OFF OFF OFF OFF OFF OFF Logic enabled Belt driven fan ON OFF OFF OFF OFF OFF OFF Truck unit Logic disabled ON OFF OFF OFF OFF OFF OFF MOP enabled Trailer unit ON OFF OFF OFF OFF OFF OFF Override Enabled MOP disabled ON OFF OFF ON OFF OFF OFF ON OFF 32c (90F) Max. Set point Overide not enabled ON OFF OFF OFF OFF CDT used 30c (86F) Max. Set point ON OFF OFF OFF OFF OFF OFF TV Engine short glow cycle CDT not used TV OFF TV OFF TV OFF TV OFF TV OFF TV OFF
Description
DI Engine long glow cycle
Not used
OFF
OFF
OFF
OFF
OFF
OFF
Micro parameters FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 FN9 FN10 FN11 Affichage display Manuel glow override Alarm reset Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 A/B PROBE choice A=Rem/B=Sup F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 2SET Set point adjustment 2CP 3SET Set point adjustment 3CP Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C T Range choix : CODES OU ENGLISH choice NORM / ADD CLR/RST 3h OFF=Norm air 10mn 4 mn A=Rem probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow RST 3h OFF=Norm air 10mn 4 mn B=Sup probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow RST 3h 3h 3h OFF=Norm air 10mn 4 mn B=Sup probe deg C OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow RST
OFF=Norm air OFF=Norm air 10mn 4 mn A=Rem probe deg C 10mn 4 mn A=Rem probe deg C
OFF=Temp strt OFF=Temp strt STD=0 Sans Sans On = Auto OP C English Norm Glow RST STD=0 Sans Sans On = Auto OP C English Norm Glow RST
Update 22/02/2008
TM1000 / TM800
MICRO configuration CNF1: choix(DI/TV) CNF2 : choix (ON/OFF) CNF3 : choix (ON/OFF) CNF4 : choix (ON/OFF) CNF5 : choix (ON/OFF) CNF6 : choix (ON/OFF) CNF7 : choix (ON/OFF) CNF8 : choix (ON/OFF) CNF9 : choix (ON/OFF) CNF10 : choix (ON/OFF) CNF11 : choix (ON/OFF) CNF12 : choix (ON/OFF) CNF13 : choix (ON/OFF) CNF14 : choix (ON/OFF) CNF15 : choix (ON/OFF) CNF16 : choix (ON/OFF) CNF 17 : choix (ON/OFF) CNF 18 : choix (ON/OFF) CNF 19 : choix (ON/OFF) CNF 20 : choix (ON/OFF) CNF 21 : choix (ON/OFF) CNF 22 : choix (ON/OFF) CNF 23 : choix (ON/OFF) CNF 24 : choix (ON/OFF)
Description
GLOW TIME Indicates to the control which engine is in the system and which glow time should be DISCHARGE SENSOR Indicates to the control if the DISCHARGE sensor is installed HIGH SETPOINT Indicates maximum Set Point allowed HEAT LOCKOUT OVERRIDE (Maxima MT Only) Indicates to the control if the heat lockout is overridden MOP Indicates status of MOP control TRUCK UNIT Indicates to the control if the system has been selected for truck operation HIGH SPEED OVERRIDE Indicates to the control if the low speed coolant check logic is enabled ELECTRIC FAN Indicates to the control if electric fans are being used OUT-OF-RANGE SHUT DOWN Indicates if main compartment out-of-range alarm shuts unit down after 45min. NOT ASSIGNED FOR TRAILER FUNCTIONAL PARAMETERS (KEYPAD) LOCKOUT OPTION Allow or lockout certain any changes of the functional parameter from keypad HP-62 MOP OPTION Use either normal or HP-62 MOP parameters HEAT ONLY UNIT OPERATION OPTION Converts unit to a "Heat only" unit INVERTABLE MULTI TEMP Indicates to the control if reversible multi temp control is active ULTRA FRESH II OPTION (Trailer unit) Indicates to the control if the Ultra Fresh II temperature control is enable SHUNT DOWN WITH ALTERNATOR AUX ALARM Indicates if alternator AUX alarm shuts unit down in diesel mode ULTRA FREEZE 1 OPERATION Indicates to the control if UFZ1 operation can run LOW REFRIGERANT TEST Indicates to the control if low refrigerant test is enable NOT ASSIGNED FOR TRAILER UNITS SELECTION LOCK OPTION Indicates to the control if the units functional parameter is locked FROZEN MODE PRIORITY LOGIC OPTION Enables frozen priority logic NOT CURRENTLY ASSIGNED SET POINT LOCK Indicates if the change of the Set Point is locked NOT ASSIGNED FOR TRAILER DI Engine long glow cycle TV Engine short glow cycle CDT not used CDT used 30c (86F) Max. Set point 32c (90F) Max. Set point Heat lockout on -12c (10F) Heat lockout off MOP disabled MOP enabled Trailer unit Truck unit Logic disabled Logic enabled Belt driven fan Electrical fan motors Out of range alarm only Out of range alarm and unit shut down Not used Not used Functions normal Functions locked MOP parameter HP 62 option Active Normal cool / heat / defrost operation Heat only operation (Solara) Not active Reversible multi-temp active Logic disabled Logic enabled Alt aux alarm only Alt aux alarm & unit shut down Disable Ultra freeze 1 Enable Ultra freeze 1 Disable low refrigerrant test Enable low refrigerrant test Not used Not used Metric unit or english metric is not locked Unit selection is locked Frozen priority not active Active Not used Not used Set Point is not locked Set Point is locked Not used Not used Not used Micro parameters FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 FN9 FN10 FN11 Affichage display Manuel glow override Alarm reset Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 A/B PROBE choice A=Rem/B=Sup F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 2SET Set point adjustment 2CP 3SET Set point adjustment 3CP Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C T Range choix : CODES OU ENGLISH choice NORM / ADD CLR/RST
Soft DI TV OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF
ON OFF OFF
ON OFF
OFF
6H Norm 20 4 Rem C time start MOP + 32F or Oc 32F or Oc Auto Op T range A English Norm CLR
Update 22/02/2008
TR1000
MICRO configuration CNF1: choix(DI/TV) CNF2 : choix (ON/OFF) CNF3 : choix (ON/OFF) CNF4 : choix (ON/OFF) CNF5 : choix (ON/OFF) CNF6 : choix (ON/OFF) CNF7 : choix (ON/OFF) CNF8 : choix (ON/OFF) CNF9 : choix (ON/OFF) CNF10 : choix (ON/OFF) CNF11 : choix (ON/OFF) CNF12 : choix (ON/OFF) CNF13 : choix (ON/OFF) CNF14 : choix (ON/OFF) CNF15 : choix (ON/OFF) CNF16 : choix (ON/OFF) DI TV OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON Description Soft DI Engine long glow cycle TV Engine short glow cycle CDT not used CDT used 30c (86F) Max. Set point 32c (90F) Max. Set point Heat lockout on -12c (10F) Heat lockout off (truck units) MOP disabled MOP enabled Trailer unit Truck unit Low speed start High speed start Belt driven fan Electrical fan motors Out of range alarm not shut down Out of range alarm and unit shut down No auto restart Auto restart active Functions normal Functions locked MOP parameter HP 62 option Active Cool / heat / defrost Heat only (Solara) Not active Not active Alt aux alarm only Alt aux alarm & unit shut down TR1000 4,05 TV ON OFF OFF
ON OFF OFF OFF OFF (option) OFF OFF (option) OFF OFF OFF OFF
ON
FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 FN9 FN10 FN11 Affichage display Manuel glow override Alarm reset
Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 A/B PROBE choice A=Rem/B=Sup F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 2SET Set point adjustment 2CP 3SET Set point adjustment 3CP Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C T Range choix : CODES OU ENGLISH choice NORM / ADD CLR/RST
6H Norm 20 7 Rem C temp start MOP STD 32F or Oc 32F or Oc Man T range B English Norm CLR
Update 22/02/2008
ULTRA
MICRO configuration
Description
Soft GLOW TIME Indicates to the control which engine is in the system and which glow time should be DISCHARGE SENSOR Indicates to the control if the DISCHARGE sensor is installed HIGH SETPOINT Indicates maximum Set Point allowed HEAT LOCKOUT OVERRIDE (Maxima MT Only) Indicates to the control if the heat lockout is overridden MOP Indicates status of MOP control TRUCK UNIT Indicates to the control if the system has been selected for truck operation HIGH SPEED OVERRIDE Indicates to the control if the low speed coolant check logic is enabled ELECTRIC FAN Indicates to the control if electric fans are being used OUT-OF-RANGE SHUT DOWN Indicates if main compartment out-of-range alarm shuts unit down after 45min. NOT ASSIGNED FOR TRAILER FUNCTIONAL PARAMETERS (KEYPAD) LOCKOUT OPTION Allow or lockout certain any changes of the functional parameter from keypad HP-62 MOP OPTION Use either normal or HP-62 MOP parameters HEAT ONLY UNIT OPERATION OPTION Converts unit to a "Heat only" unit INVERTABLE MULTI TEMP Indicates to the control if reversible multi temp control is active ULTRA FRESH II OPTION (Trailer unit) Indicates to the control if the Ultra Fresh II temperature control is enable SHUNT DOWN WITH ALTERNATOR AUX ALARM Indicates if alternator AUX alarm shuts unit down in diesel mode ULTRA FREEZE 1 OPERATION Indicates to the control if UFZ1 operation can run LOW REFRIGERANT TEST Indicates to the control if low refrigerant test is enable XT units UNITS SELECTION LOCK OPTION Indicates to the control if the units functional parameter is locked FROZEN MODE PRIORITY LOGIC OPTION Enables frozen priority logic NOT CURRENTLY ASSIGNED SET POINT LOCK Indicates if the change of the Set Point is locked NOT ASSIGNED FOR TRAILER DI Engine long glow cycle TV Engine short glow cycle CDT not used CDT used 30c (86F) Max. Set point 32c (90F) Max. Set point Heat lockout on -12c (10F) Heat lockout off MOP disabled MOP enabled Trailer unit Truck unit Logic disabled Logic enabled Belt driven fan Electrical fan motors Out of range alarm only Out of range alarm and unit shut down Not used Not used Functions normal Functions locked MOP parameter HP 62 option Active Normal cool / heat / defrost operation Heat only operation (Solara) Not active Reversible multi-temp active Logic disabled Logic enabled Alt aux alarm only Alt aux alarm & unit shut down Disable Ultra freeze 1 Enable Ultra freeze 1 Disable low refrigerrant test Enable low refrigerrant test Non-XT units XT units only Metric unit or english metric is not locked Unit selection is locked Frozen priority not active Active Not used Not used Set Point is not locked Set Point is locked Not used Not used Not used Micro parameters FN0 FN1 FN2 FN3 FN4 FN5 FN6 FN7 FN8 FN9 FN10 FN11 Affichage display Manuel glow override Alarm reset Defrost setting : 1,5;3;6;12h ON/OFF Air On = high/Off=Norm Off time choice : 10;20;30;45;90mn On time choice 4;7 A/B PROBE choice A=Rem/B=Sup F/C degree choix : F or C On=time start/ Off=temp start MOP choice : STD=0/-=-5/+=+4 2SET Set point adjustment 2CP 3SET Set point adjustment 3CP Start Op choice : on=Auto/off=Man T range choix A=2, B=3, C=4 Dreg C T Range choix : CODES OU ENGLISH choice NORM / ADD CLR/RST DI TV OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF
CNF1: choix(DI/TV) CNF2 : choix (ON/OFF) CNF3 : choix (ON/OFF) CNF4 : choix (ON/OFF) CNF5 : choix (ON/OFF) CNF6 : choix (ON/OFF) CNF7 : choix (ON/OFF) CNF8 : choix (ON/OFF) CNF9 : choix (ON/OFF) CNF10 : choix (ON/OFF) CNF11 : choix (ON/OFF) CNF12 : choix (ON/OFF) CNF13 : choix (ON/OFF) CNF14 : choix (ON/OFF) CNF15 : choix (ON/OFF) CNF16 : choix (ON/OFF) CNF 17 : choix (ON/OFF) CNF 18 : choix (ON/OFF) CNF 19 : choix (ON/OFF) CNF 20 : choix (ON/OFF) CNF 21 : choix (ON/OFF) CNF 22 : choix (ON/OFF) CNF 23 : choix (ON/OFF) CNF 24 : choix (ON/OFF)
ON OFF OFF
ON OFF OFF
OFF
OFF
6H OFF=Norm air 10 mn 4 mn A=rem Probe Deg F OFF=temp strt STD=0 sans sans ON=Auto OP C English Norm Glow CLR
6H OFF=Norm air 10 mn 4 mn A=rem Probe Deg F OFF=temp strt STD=0 sans sans ON=Auto OP C English Norm Glow CLR
Update 22/02/2008
XARIOS
XARIOS ROAD / STAND-BY
MICRO CONFIGURATION
Xarios 150/150- Xarios 150/150 04/200/20004/200/200with Hot gas 04/300/300-05 04/300/300-05 heating option road / stand-by road / standby 24v 12v
AUT HIGH Ut C PS 12 Fan1 SPD3 2ET hrof hsof drof doff euof spof 0C - 29 C + 20 C dif1 Foff AUT HIGH Ut C PS 24 Fan1 SPD3 2ET hrof hsof drof doff euof spof 0C - 29 C + 20 C dif1 Foff
Xarios Xarios 350/350350/350with Hot gas 05/400/500-04 05/400/500-04 heating option road / stand- road / standby 24v by 12v
AUT HIGH Ut C PS 12 Fan2 SPD3 2ET hrof hsof drof doff euof spof 0C - 29 C + 20 C dif1 Foff AUT HIGH Ut C PS 24 Fan2 SPD3 2ET hrof hsof drof doff euof spof 0C - 29 C + 20 C dif1 Foff
Xarios Xarios 500/600/ road 500/600/ road / stand-by 12v / stand-by 24v
DEFROST BRIGHTNESS UNIT (Ut) BATTERY VOLTAGE (PS) NUMBER OF FAN (FAn) FAN SPEED (SPd) NUMBER OF STAGES (ET) OPTIONNAL HEATING ROAD (hr) OPTIONNAL HEATING STANDBY (hs) OPTIONNAL DRAIN RESISTOR (dr) OPTIONNAL DOOR SWITCH (d) * HYBRID UNIT ONLY (eu) * OPTIONNAL SET POINT LOCK SET POINT
AUT HIGH Ut C PS 12 Fan3 SPD3 3ET hrof hsof drof doff euof spof 0C - 29 C + 20 C dif1 Foff
AUT HIGH Ut C PS 24 Fan3 SPD3 3ET hrof hsof drof doff euof spof 0C - 29 C + 20 C dif1 Foff
configuration
3ET
3ET
Parameters
LOW SET POINT HIGH SET POINT TEMPERATURE DIFFERENCIAL (dif) EVAPORATOR FAN CONTINUOUS RUN (F)
MICRO CONFIGURATION
DEFROST BRIGHTNESS UNIT (Ut) BATTERY VOLTAGE (PS) NUMBER OF FAN (FAn) FAN SPEED (SPd) NUMBER OF STAGES (ET) OPTIONNAL HEATING ROAD (hr) OPTIONNAL HEATING STANDBY (hs) DRAIN RESISTOR (dr) DOOR SWITCH (d) SET POINT
parameters
configurations
LOW SET POINT HIGH SET POINT TEMPERATURE DIFFERENCIAL (dif) EVAPORATOR FAN CONTINUOUS RUN (F)
XARIOS MT
ROAD / ROAD STANDBY
MICRO CONFIGURATION DEFROST operating mode selection DEFROST interval BRIGHTNESS UNIT (Ut) BATTERY VOLTAGE (PS) xarios 350/350-05 MT Road / road stand-by 12v Simu 3H HIGH Ut C PS 12 xarios 350/350-05 MT Road / road stand-by 24v Simu 3H HIGH Ut C PS 24 Xarios 500 MT Road / Road stand-by 12v Simu 3H HIGH Ut C PS 12 Xarios 600 MT Xarios 600 MT Xarios 500 MT Road Road / Road stand- Road / Road stand/ Road stand-by 24v by 12V by 24V Simu Simu Simu 3H 3H 3H HIGH HIGH HIGH Ut C PS 24 Ut C PS 12 Ut C PS 24
configurations
** to be selected
NUMBER OF FAN (FAn)
** to be
selected regarding evaporators
SPD3 / hrof hsof drof doff aloff 0C/-20C Auto - 29 C + 20 C dif2 Foff
** to be
selected regarding evaporators
SPD3 / hrof hsof drof doff aloff 0C/-20C Auto - 29 C + 20 C dif2 Foff
** to be
selected regarding evaporators
SPD3 / hrof hsof drof doff aloff 0C/-20C Auto - 29 C + 20 C dif2 Foff
** to be
selected regarding evaporators
SPD3 / hrof hsof drof doff aloff 0C/-20C Auto - 29 C + 20 C dif2 Foff
** to be
selected regarding evaporators
SPD3 / hrof hsof drof doff aloff 0C/-20C Auto - 29 C + 20 C dif2 Foff
regarding evaporators
SPD3 / hrof hsof drof doff aloff 0C/-20C Auto - 29 C + 20 C dif2 Foff
FAN SPEED (SPd) NUMBER OF STAGES (ET) OPTIONNAL HEATING ROAD (hr) OPTIONNAL HEATING STANDBY (hs) DRAIN RESISTOR (dr) DOOR SWITCH (d) ALARM OUT OF RANGE (al) SET POINT COOLING operating mode selection
parameters
LOW SET POINT HIGH SET POINT TEMPERATURE DIFFERENCIAL (dif) EVAPORATOR FAN CONTINUOUS RUN (F)
** MXS 600 fan1 ** MXS 850 fan1 ** MXV 850 fan1 ** MXL 1100 fan2
Update 22/02/2008
MICRO CONFIGURATION
DEFROST SET POINT UNITY (Ut) BATTERY VOLTAGE (PS) NUMBER OF STAGES (ET) DOOR SWITCH (d) LOW SET POINT TEMPERATURE DIFFERENCIAL (dif) EVAPORATOR FAN CONTINUOUS RUN (F) AUT 0C Ut C PS 12 3ET doff - 29 C dif2 Foff
Update 22/02/2008
VIENTO
VIENTO ROAD ONLY Soft version
MICRO CONFIGURATION
VIENTO 350 CH VIENTO 350 LA VIENTO 350 R134A / HA R134A LA / HA R404A 4,0
NATURAL Ut C 2ET* 0C 0C + 30 C dif2 Foff
SOFTWARE DEFROST BRIGHTNESS UNIT (Ut) BATTERY VOLTAGE (PS) NUMBER OF FAN (FAn) FAN SPEED (SPd) NUMBER OF STAGES (ET) OPTIONNAL HEATING ROAD (hr) OPTIONNAL HEATING STANDBY (hs) OPTIONNAL DRAIN RESISTOR (dr) OPTIONNAL DOOR SWITCH (d) SET POINT
4,0
1H - 15' Ut C 3ET* 0C 0C + 30 C dif2 Foff
4,0
1H - 15' Ut C 3ET* 0C 0C + 30 C dif2 Foff
4,0
1H - 15' Ut C 3ET* 0C 0C + 30 C dif2 Foff
VIENTO VIENTO VIENTO 200 LA / 200 LA / 200 CH HA HA R134A R134A R404A 4,0 4,0 4,0
NATURAL Ut C 2ET* 0C 0C + 30 C dif2 Foff 1H - 15' Ut C 3ET* 0C 0C + 30 C dif2 Foff 1H - 15' Ut C 3ET* 0C 0C + 30 C dif2 Foff
Parameters
configuration
LOW SET POINT HIGH SET POINT TEMPERATURE DIFFERENCIAL (dif) EVAPORATOR FAN CONTINUOUS RUN (F)
Update 22/02/2008
Coolset
6HRS 4 MIN 30 MIN 4 DEG C 0 MIN 4 MIN 45 MIN 5 DEG C 0 MIN 0 DEG C OFF RETURN AIR
Ecofuel
METRIC UNITS YES OFF OFF OFF OFF OFF OFF OFF OFF 4 DEG C NO NO NO NO NO NO
Update 22/02/2008
SETTINGS Coolset
XXXX XXXX SHORT NO NO YES YES 255 SECS NO YES NO 2.1 BAR 7A 12,2V NO NO NO NO NO DEVICE OFF 26A 22A 17A 4A OFF YES YES YES 0 HOUR 0 HOUR 0 HOUR 0 HOUR 0 HOUR 0 HOUR 0 HOUR 0 HOUR OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 32.0 DEG C 32.0 DEG C OFF 32.0 DEG C 32.0 DEG C -30 DEG C +32 DEG C -30 DEG C +32 DEG C -30 DEG C +32 DEG C INSTALLED & SHUTDOWN SEPARATE OFF OFF NOT INSTALLED ALARM ONLY 2 LIGHT NO OFF OFF NO 1.0 MIN -6.0 DEG C -5.0 DEG C NOT INSTALLED -3.0 DEG C -1;0 DEG C NO OTHER STANDARD NO
Ecofuel
FUNCTIONAL PARAMETER
DEFROST TIMER SET FOR PERISH MIN RUN TIME PERISH MIN OFF TIME PERISH OVERRIDE TEMP PERISH MAX OFF TIME FROZEN MIN RUN TIME FROZEN MIN OFF TIME FROZEN OVERRIDE TEMP FROZEN MAX OFF TIME FROZEN SHUTDOWN OFFSET PERISH SENSITIVE PRODUCT TEMP CONTROL DISPLAY IN (LOCKED) ECO MODE ENGINE HOURS STANDBY HOURS SWITCH ON HOURS PM 1 PM 2 PM 3 PM 4 PM 5 OUT OF RANGE ALARM C2 OUT OF RANGE ALARM C3 OUT OF RANGE ALARM (BR3 only) SILENT MODE SLEEP MODE
6HRS 4 MIN 20 MIN 3 DEG C 0 MIN 4 MIN 30 MIN 4 DEG C 0 MIN 0 DEG C OFF RETURN AIR
SETTINGS Coolset
6HRS 4 MIN 30 MIN 4 DEG C 0 MIN 4 MIN 45 MIN 5 DEG C 0 MIN 0 DEG C OFF RETURN AIR METRIC UNITS YES OFF OFF OFF OFF OFF OFF OFF OFF 4 DEG C 4 DEG C 4 DEG C NO NO NO NO
Ecofuel
METRIC UNITS NO OFF OFF OFF OFF OFF OFF OFF OFF 4 DEG C 4 DEG C 4 DEG C NO NO
Update22/02/2008