Professional Documents
Culture Documents
07 31 51 55 57 59 63 69 73 75 77 85 89 93 97 99 Calipers Micrometers Tool Sets Setting Rings Setting Standards Gauge Blocks Sets Squares Scribing Gauges Angle Protractor Levels Dial Gauges Lever Indicators Stands/Blocks/Parallels Comparator Gauges Auxiliary Fixtures Optical Measurements
Digital dial gauges HP dial gauges 40mm dial gauges Metric, 0.8mm measuring span Metric, 0.2mm measuring span Inch, 0.03in measuring span 58mm dial gauges Inch dial gauges Dial depth gauges Inch, 0.008in measuring span Measuring stands Parallel sets Blocks sets Knife edge square 90 Flat edge square 90 with wide base Flat edge square 90 Flat edge square 90 with wide base Flat edge square 90 with block base, INCH Double square Electronic calipers Dial calipers Vernier calipers External micrometers Internal micrometers Depth micrometers Depth calipers Special purpose calipers Calipers accessories Special purpose micrometers Micrometers accessories
Effective and affordable, each precision tool can be used with every confidence for efficient quality control . Among others, the STANDARD GAGE line offers traditional gauges such as calipers, micrometers, dial gauges, indicators, height and scribing gauges, gauge blocks. The range is constantly evolving, and includes a STANDARD GAGE machine VISUAL 250 for non-contact measurement. STANDARD GAGE products are mainly manufactured in Asia, and further selected according to strict quality criteria from HEXAGON METROLOGY. All are checked individually by means of certified master gauges for their traceability. They are also supplied with an inspection report attesting their conformity to technical specifications. All relevant information about STANDARD GAGE is available on www.standardgage.com For more information, please contact your local distributor or send an e-mail to standardgage@hexagonmetrology.com.
QUALITY CONTROL
All STANDARD GAGE products are checked to the high quality standards offfered by HEXAGON METROLOGY. Following a rigorous procedure in the laboratory to ensure their quality level, each product comes with an inspection report (see below).
CALIPERS
www.standardgage.com
ELECTRONIC CALIPERS
Stainless steel beam and slider. With or without thumb roller. Direct metric/inch conversion. Precision to 0,02 mm (models 150 mm) or 0,04 mm (models 200 and 300 mm). Resolution 0,01 mm/0.0005 in. Large LC display. Supplied in a suited case with inspection report.
16
13
3,2
1.5
71,5
40
15.5
00534020
Order number
00534020 00534021 00534022
Measuring range
mm 0 150 0 200 0 300 in 06 08 0 12
Measuring jaws
L in mm 40 50 60
Thumb roller
Stainless steel beam and slider. With thumb roller. Direct metric/inch conversion. Absolute/Incremental measurement. Precision to 0,02 mm (models 150 mm) or 0,04 mm (models 200 and 300 mm). Resolution 0,01 mm/0.0005 in. Supplied in a suited case with inspection report.
00534231
Order number
00534230 00534231 00534232 00534233
Measuring range
mm 0 150 0 200 0 200 0 300 in 06 08 08 0 12
Measuring jaws
L in mm 40 50 50 60
Display
Regular Regular Large Regular
Hold feature
16
13
3,2 1.5
40
00534002
00534003
Order number
00534002 00534003 00534004 00534005
Measuring range
mm 0 150 0 150 0 200 0 300 in 06 06 08 0 12
Measuring jaws
L in mm 40 40 50 60
Thumb roller
15.5
00534210
Order number
00534210
Measuring range
mm 0 150 in 06
Measuring jaws
L in mm 40
00534220
Order number
00534220
Measuring range
mm 0 150 in 06
Measuring jaws
L in mm 40
00534240
Order number
00534240 00534241 00534242 00534243
Measuring range
mm 0 100 0 150 0 200 0 300 in 04 06 08 0 12
Measuring jaws
L in mm 30 40 50 60
00534251
Order number
00534250 00534251
Measuring range
mm 0 150 0 300 in 06 0 12
Measuring jaws
L in mm 40 60
00534260
Order number
00534260 00534261 00534262
Measuring range
mm 0 300 0 600 0 1000 in 0 12 0 24 0 40
Measuring jaws
L in mm 60 150 150
00514019
Order number
Metric models 00514018 00514019 00514020 00514021
Measuring range
mm 0 150 0 150 0 200 0 300
Reading
mm 0,01 0,02 0,02 0,02
Order number
Inch models 00524010 00524011 00524012 00524013
Measuring range
in 06 06 08 0 12
Reading
in 0.001 0.001 0.001 0.001
3.7
00524010
00514009
Order number
Metric models 00514009 00514010 00514011 00514012 00514013 00514014 00514015
Measuring range
mm 0 70 0 150 0 150 0 200 0 200 0 300 0 300
Vernier reading
mm 0.05 0.02 0.05 0.02 0.05 0.02 0.05
Length of jaws
mm 30 40 40 50 50 60 60
00514022
Order number
00514022* 00514023 00514024 00514025
Measuring range
mm 0 150 0 150 0 200 0 300
Vernier reading
mm 0.02 0.02 0.02 0.02
Length of jaws
L in mm 40 40 50 64
3.7
00534011
Order number
Metric/inch models 00534011 00534012 00534013 00534014 00534030 00534015 00534031
Measuring range Vernier reading Length of lower scale upper scale lower scale upper scale jaws
mm 0 100 0 150 0 150 0 200 0 200 0 300 0 300 in 04 06 06 08 08 0 12 0 12 mm 0,05 0,02 0,05 0,02 0.05 0,02 0.05 in 1/128 0.001 1/128 0.001 1/128 0.001 1/128 mm 30 40 40 50 50 60 60
73.5
227
00524001
Order number
Inch models 00524001 00524002
Measuring range Vernier reading Length of lower scale upper scale lower scale upper scale jaws
in 06 08 in 06 08 in 0.001 0.001 in 1/128 1/128 in 1.6 1.6
3.7
00514016
Order number
Length of jaws mm 40 40 40
06
1/128
00534018
Order number
Length of jaws mm 40 40
00534017 00534018
0 150 0 150
06 06
0,02 0,05
0.001 1/128
00514028
Order number
Measuring range Vernier reading Length of lower scale upper scale lower scale upper scale jaws
mm in 06 06 mm 0.05 0.05 in 1/128 mm 40 40 0 150 0 150
00514028 00534019
Order number
00564001
a (mm)
76,2
b (mm)
30
c (mm)
16,2
00514036
Order number
00514036 00514037 00514038
Reading (mm)
0,02 0,02 0,02
00524030
Order number
00524030 00524031 00534032
Reading (in)
0.001 0.001 0.001
Order number
00514030
Reading (mm)
0,02 0,05 0,02 0,05 0,02 0,05
00514030
Order number
00524020
Reading (in)
0.001 0.001 0.001
00524020
00524021 00524022
Description
Optional bridge, 180 mm Optional bridge, 260 mm Optional bridge, 320 mm
00514040
Order number
00514040 00514041
Reading (mm)
0,02 0,05
00514039
Order number
Metric models 00514039 Inch models 00524039
Measuring range
mm 0 250 in 0 10
Reading
mm 0.02 in 0.001
Beam section
mm 12 x 4 in 0.472 x 0.157
Bridge length
mm 130 in 5.11
00514042
Order number
Metric models 00514042 00514043 00514044 Inch models 00524043 00524044
Measuring range
mm 0 150 0 200 0 300 in 0 8 0 10
Reading
mm 0.05 0.05 0.05 in 1/128 1/128
Beam section
mm 10 x 3 10 x 3 10 x 3 in 0.393 x 0.118 0.393 x 0.118
Bridge length
mm 100 100 100 in 3.937 3.937
00534101
Order number
00534101 00534102 00534103 00534104
Measuring range
mm 0 150 0 200 0 300 0 500 in 06 08 0 12 0 20
Reading
mm 0,01 0,01 0,01 0,01 in .0005 .0005 .0005 .0005
Beam section
mm 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5
Bridge length
mm 100 100 150 150
00534105
Order number
00534105 00534106 00534107 00534108
Measuring range
mm 0 150 0 200 0 300 0 500 in 06 08 0 12 0 20
Reading
mm 0,01 0,01 0,01 0,01 in .0005 .0005 .0005 .0005
Beam section
mm 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5
Bridge length
mm 100 100 150 150
00534113
Order number
00534113 00534114 00534115 00534116
Measuring range
mm 0 150 0 200 0 300 0 500 in 06 08 0 12 0 20
Reading
mm 0,01 0,01 0,01 0,01 in .0005 .0005 .0005 .0005
Beam section
mm 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5
Bridge length
mm 100 100 150 150
Bridge length
mm 1 x 6 1 x 6 1 x 6 1 x 6
Measuring travel
mm 0 25 0 25 in 01 01
Measuring range
mm 0 550 0 25 in 0 22 01
00534201
00514026
Order number Measuring range
mm 00514026 0 300
Vernier reading
mm 0.05
00514029
Order number
Metric models 00514029 Metric/Inch models 00534032
00514050
Order number
Metric models 00514050 00514051 00514052 Metric/Inch models 00534050 00534051 00534052
Measuring travel
mm 0 300 0 500 0 1000 mm 0 300 0 500 0 1000 in 0 12 0 20 0 40
Measuring range
mm 0.05 0.05 0.05 mm 0.05 0.05 0.05 in 1/128 1/128 1/128
00514027
Order number
Measuring range
mm
Vernier reading
mm 0,02
00514027
0 600
00514053
Finely graduated for precise measurement. Stainless steel. Satin-chrome scale and vernier backgrounds. With fine adjustment. Supplied in a suited case with inspection report.
Order number
Metric models 00514053 00514054 00514055 00514056 Metric/Inch models 00534053 00534054 00534055 00534056
00534056
Finely graduated for precise measurement. Stainless steel. Satin-chrome scale and vernier backgrounds. With fine adjustment. Supplied in a suited case with inspection report.
Order number
Metric models 00514056 Metric/Inch models 00534056
00514060
Order number
Metric models 00514060 00514061 Metric/Inch models 00534061
00514062
Order number
Metric models 00514062 00514063 00514064 Inch models 00524063
Length of T jaws
mm 135 160 160 in 6.3
00514066
Order number
Metric models 00514065 00514066 00514067
Length of tip
mm 70 72 72
00514070
Order number
Metric models 00514070 00514071 00514072 00514073 00514074
Length of jawsA
mm 0.9 2 3 4 5
Length of jawsB
mm 3 5 7 8.5 10
Length of jawsB
mm 25 40 60 80 100
00534200
Order number
00534200
Measuring range
mm 0 31.5 in 0 1.25
Fixed jaw
L in in 0.47 x 0.90
mICROmETERS
www.standardgage.com
31
00134001 00134041
Precision (mm)
Order number
00134040
Single micrometers
3
00134041 0 100 4 Full sets are supplied in a suited case with inspection report for each micrometer.
B D L 28,5 19,5 41 64
Dimensions (mm)
A 24 32 45 57 B 6 8 8 10 D 3,0 3,0 3,0 3,0 L 32 57 82 107
00134021 00134046
Order number
Resolution (in)
Numerical indication Micrometer head 0.0001 0.0001 0.0001 0.0001
Precision (in)
01 12 23 34
Electronic micrometers IP54, external, inch Electronic micrometer sets IP54,range Order number Application external, inchSingle micrometers
(in)
00134045 00134046
03 04
3 4
Full sets are supplied in a suited case with inspection report for each micrometer.
Dimensions (mm)
A 24 32 45 57 B 6 8 8 10 D 3,0 3,0 3,0 3,0 L 32 57 82 107
B D
L 28,5
41
64
19,5
00114101
00114111
Precision (mm)
0,004 0,004 0,005 0,005
25 50 75
Order number
00114110 00114111
Full sets are supplied in a suited case with inspection report for each micrometer.
A 6,5 B L 40,5 2,5 19,5 50,5
Dimensions (mm)
A 24 32 45 57 B 6 8 8 10 C 3,0 3,0 3,0 3,0 L 32 57 82 107
0 0 0 0 0
00124024 00124029
Precision (in)
0.00016 0.00016 0.00020 0.00020
1 2 3
Order number
00124028 00124029
Full sets are supplied in a suited case with inspection report for each micrometer.
Dimensions (mm)
A 24 32 45 57 B 6 8 8 10 C 3,0 3,0 3,0 3,0 L 32 57 82 107
50,5
00114010 Carbide-tipped measuring faces. Scale division 0,01 mm / 0.0001 in. Setting standard for sizes over 25 mm / 1 in. Ratchet friction thimble and locking nut. Delivered in a suited case with inspection report.
Order number
00114010 00114011 00114012 00114013 00114014 00114015 00114016 00114017 00114018 00114019 00114020 00114021
00114041
Measuring range Precision (mm) (mm)
0 25 25 50 50 75 75 100 100 125 125 150 150 175 175 200 200 225 225 250 250 275 275 300 0,004 0,004 0,005 0,005 0,006 0,006 0,007 0,007 0,008 0,008 0,009 0,009
Order number
00114040 00114041
A B L 28,5 19,5 17 64
Full sets are supplied in a suited case with inspection report to each micrometer.
Measuring range
Metric (mm) 0 25 25 50 50 75 75 100 100 125 125 150
19,5
Dimensions (mm)
A 3,0 3,0 3,0 3,0 3,0 3,0 5,5 5,5 5,5 5,5 5,5 5,5 B 6 8 8 8 8 8 8 8 19,4 19,4 19,4 19,4 C 24 32 45 57 70 82 95 107 130 142 155 168 L 32 57 82 107 133 158 183 209 234 260 285 310
B A
6,5
6,5
17
64
150 175 175 200 200 225 225 250 250 275 275 300
00124010 00124041
Order number
00124010 00124011 00124012 00124013 00124014 00124015 00124016 00124017
Carbide-tipped measuring faces. Scale division 0,01 mm / 0.0001 in. Setting standard for sizes over 25 mm / 1 in. Ratchet friction thimble and locking nut. Delivered in a suited case with inspection report.
Order number
00124040
00124041 04 4 1, 2, 3 Full sets are supplied in a suited case with inspection report to each micrometer.
Measuring range
Metric (mm) 01 12 23 34 45 56 67 78
6 8 8 8 8 8 8 8
24 32 45 57 70 82 95 107
19,5
6,5
Dimensions (mm)
17
64
00114201 00114210
Order number
00114201 00114202 00114203 00114204
Precision (mm)
0,004 0,004 0,005 0,005
Order number
00114210 00114211
Single micrometers
3 4
A
6,5
L C 28,5
17
64
Dimensions (mm)
A B 24 32 45 57 C 3,0 3,0 3,0 3,0 L 32 57 82 107 6 8 8 8
0 25 25 50 50 75 75 100
00124020
Order number
00124020 00124021 00124022
Precision (mm)
0.00016 0.00016 0.00020
Wide application range through 7 pairs of interchangeable inserts. Hardened steel anvil. Graduations to 0,01 mm. Ratchet friction thimble and locking nut. Delivered in a suited case with inspection report.
19,5
Order number
00114055* 00114056* 00114057* 00114058*
Precision (mm)
0,004 0,004 0,005 0,005
C (mm)
26 38 50 62
L (mm)
42 67 92 118
00114055
00164001 00164002
6.5
4.5
R= 5
4.5
6.5
00164003
4
00164004
4.5
0.7
00164005
3.5
0.3
6.5
00164006 00164007
0.3
00114031
Order number
00114030 00114031 00114032 00114033 00114034 00114035 00114036
Precision (mm)
0,006 0,009 0,011 0,015 0,016 0,020 0,021
A (mm)
82 165 250 321 401 476 551
L (mm)
158 308 459 609 759 909 1059
Number of anvils
6 6 6 6 6 6 6
00914003
L1
L1
Order number Measuring range Scale division Precision (mm) (mm) (mm)
00914001 00914002 00914003 00914004 00914005 00914006 00914007 00914008 00914009 00914010 00914011 00914012 00914013 68 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 63 62 75 75 88 87 100 0,001 0,001 0,001 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,004 0,004 0,004 0,004 0,004 0,004 0,004 0,004 0,005 0,005 0,005 0,005 0,005
A (mm)
0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5
00924003
L1
L1
Order number Measuring range Scale division Precision (in) (in) (in)
00924001 00924002 00924003 00924004 00924005 00924006 00924007 00924008 00924009 00924010 00924011 00924012 00924013 0.275 0.35 0.35 0.425 0.425 0.5 0.5 0.65 0.65 0.8 0.8 1 1 1.2 1.2 1.6 1.6 2 2 2.5 2.5 3 3 3.5 3.5 4 0.0001 0.0001 0.0001 0.0002 0.0002 0.0002 0.0002 0.0002 0.0002 0.0002 0.0002 0.0002 0.0002 0.00016 0.00016 0.00016 0.00016 0.00016 0.00016 0.00016 0.00016 0.00020 0.00020 0.00020 0.00020 0.00020
A (in)
0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02
00914023
Order number
Measuring range
mm 6 12
Single micrometers
No 00914001 00914002 00914003 mm 68 8 10 10 12 12 16 16 20 20 25 25 30 30 40 40 50 50 63 62 75 75 88 87 100
Setting rings
No 00944004 00944005 00944006 00944008 00944010 00944012 00944014 00944017 mm 6 8 10 16 25 40 62
Extension rods
No 00964001 00964002 00964003 00964004 mm 100 150 150 150
00914020
00914021 00914022
12 20 20 50
00914023
50 100
00964005 87
150
Full sets are supplied in a suited case with inspection report for each micrometer.
Single micrometers
No 00924001 00924002 00924003 in 0.275 0.35 0.35 0.425 0.425 0.5 0.5 0.65 0.65 0.8 0.8 1 1 1.2 1.2 1.6 1.6 2 2 2.5 2.5 3 3 3.5 3.5 4 87 100
Setting rings
No 00954003 00954004 00954006 00954007 00954009 00954011 00954013 00954016 in 0.275 0.35 0.5 0.65 1 1.6 2.5
Extension rods
No 00964001 00964002 00964003 00964004 in 4 6 6 6
00924021 00924022
00924023
24
00964005 3.5
Full sets are supplied in a suited case with inspection report for each micrometer.
Description
mm / in Extension rod for measuring range 6 12 / 0.275 0.500 Extension rod for measuring range 12 20 / 0.500 0.800 Extension rod for measuring range 20 30 / 0.800 1.2 Extension rod for measuring range 30 50 / 1.2 2 Extension rod for measuring range 50 100 / 2 4
Length
mm / in 100 / 4 150 / 6 150 / 6 150 / 6 150 / 6
00214003
Precision (mm)
0,005 0,005 0,005 0,005
Depthfoot (mm)
63 63 101,5 101,5
00224001
Order number
00224001 00224002 00224003 00224004
Precision (in)
0.00020 0.00020 0.00020 0.00020
Spindle end with a carbide-tipped insert. Hardened steel anvil. Chrome-plated frame. Scale division to 0,01 mm. Ratchet friction thimble and locking nut. Delivered in a suited case with inspection report.
26
1,5
6,5
19,5
00114053
Order number
00114053 00114054
Precision (mm)
0,004 0,004
A (mm)
28,5 53,5
d (mm)
3 5
117
00164009
68
00164010
Description (mm)
Micrometer stand Micrometer stand Heavy model
Order number
120
40
00164009 00164010
1,2
00114052
Order number
00114052
Precision (mm)
0,006
12 h6
00114050
Order number
00114050 00114051
Reading (mm)
0,01 0,002
16,5 0,1
Precision (mm)
0,003 0,003
25
Order number
00164011
Description (mm)
Interchangeable spherical anvil
00164011
TOOL SETS
www.standardgage.com
51
Order number
00514100
Order number
Tool set including: 1 Micrometer with a 0 25 mm measuring range, reading to 0,01 mm 1 Caliper with a 0 150 mm measuring range, vernier reading to 0,05 mm 1 Black coloured plastic case 1 Inspection report provided with each tool
00114010 00514011
00524100
Order number
00524100
Order number
Tool set including: 1 Micrometer with a 0 1 in measuring range, reading to 0.0001 in 1 Caliper with a 0 6 in measuring range, vernier reading to 0.001 in/1 / 128 in 1 Black coloured plastic case 1 Inspection report provided with each tool
00124010 00524001
00534100
Order number
00534100
Order number
Tool set including: 1 Electronic micrometer, 0 25 mm measuring range, resolution to 0,001 mm 1 Caliper with a 0 150 mm measuring range, resolution to 0,01 mm 1 Black coloured plastic case 1 Inspection report provided with each tool
00134001 00534020
00534098
Order number
00534098
Order number
Tool set including: 1 Polycarbonate caliper, 0 150 mm measuring range, resolution to 0,01 mm 1 Electronic depth gage, 0 550 mm application range, resolution to 0.01 mm 1 Black coloured plastic case 1 Inspection report provided with each tool
00534210 00534201
00534099
Order number
00534099
Order number
Tool set including: 1 Polycarbonate caliper, 0 150 mm measuring range, resolution to 0,01 mm 1 Electronic depth gage, 0 550 mm application range, resolution to 0.01 mm 1 Black coloured plastic case 1 Inspection report provided with each tool
00534220 00534201
SETTING RINGS
www.standardgage.com
55
Order number
00944004 00944005 00944006 00944008 00944010 00944012 00944014
Diameter (mm)
6 8 10 16 25 40 62 87
A (mm)
0,0015 0,0015 0,0015 0,0015 0,0015 0,0015 0,0015 0,0015
B (mm)
0,0010 0,0010 0,0010 0,0010 0,0010 0,0010 0,0015 0,0015
00944010
00944017
Order number
00954003 00954004 00954006 00954007 00954009 00954011 00954013
Diameter (in)
0.275 0.350 0.500 0.650 1.000 1.600 2.500 3.500
A (in)
0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006
B (in)
0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00006 0.00006
00954009
00954016
SETTING STANDARDS
www.standardgage.com 57
SETTING STANDARDS
For calibrating the zero position on external micrometers. With heat insulating handle. Supplied with inspection report.
Order number
02164001 02164002 Flat measuring faces Spherical measuring faces 02164003 02164004 02164005 02164006 02164007 02164008 02164009 02164010 02164011 02164012 02164013 02164014 02164015 02164016 02164017 02164018 02164019 02164020 02164021 02164022 02164023 02164024 02164025 02164026 02164027 02164028 02164029 02164030 02164031
D
D (mm)
7 7 7 8 8 8 8 8 8 8 8 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 23
Measuring faces
D (in)
0.276 0.315 0.276 0.315 0.315 0.315 0.315
Measuring faces
D D
D D
D D
D D
D D
D D
D D
D D
D D
D D
D D
D D
DD
D D
D D
D D
D D
06511101
06511103
Order number
06511101 06511102 06511103 06511104 06511201
Description
M103 block set M88 block set M47 block set M32 block set M103 block set M88 block set M47 block set M32 block set
Grades
1 1 1 1 2 2 2 2
06511104
Set compositions
103-piece set
Dimensions (mm)
1,005 1,01 1,49 0,5 24,5 25 100
Steps (mm)
0,01 0,5 25
Pieces
1 49 49 4
88-piece set
Dimensions (mm)
1,0005 1,001 1,009 1,01 1,49 0,5 9,5
Steps (mm)
0,001 0,01 0,5
Pieces
1 9 19
te te
V
49
47-piece set
Dimensions (mm)
1,005 1,01 1,19 1,2 1,9 1 9 10 100
Steps (mm)
0,01 0,5 1 10
Pieces
1 19 8 9 10
32-piece set
Dimensions (mm)
1,005 1,01 1,09 1,1 1,9 19 10, 20, 30, 50
Nominal length In; variation v, limit deviations te at any point against the nominal length.
Steps (mm)
0,01 0,1 1
Pieces
1 9 9 9 4
Grade 1
Nominal length Limit deviation at any point against the nominal length te m 0,2 0,3 0,4 0,5 0,6 Tolerance for the variation in length
Grade 2
Limit deviation at any point against the nominal length te m 0,45 0,6 0,8 1 1,2 Tolerance for the variation in length
ln
tv
ln
tv
SQuARES
www.standardgage.com
63
08114003
Order number
Dimensions
mm 50 x 40 75 x 50 100 x 70 150 x 100 200 x 130
Grade
00 00 00 00 00
08114004
Order number
Grade 0 08114006 08114007 08114008 08114009 08114010
Dimensions
mm 50 x 40 75 x 50 100 x 70 150 x 100 200 x 130
Grade
0 0 0 0 0
08114012
Order number
Grade 00 08114011 08114012 08114013 08114014 08114055
Dimensions
mm 50 x 40 75 x 50 100 x 70 150 x 100 200 x 130
Grade
00 00 00 00 00
08114013
Order number
Grade0 08114016 08114017 08114018 08114019 08114020
Dimensions
mm 50 x 40 75 x 50 100 x 70 150 x 100 200 x 130
Grade
0 0 0 0 0
08114021
Order number
Grade 0 08114021 08114022 08114023 08114024 08114025
Dimensions
mm 75 x 50 100 x 70 150 x 100 200 x 130 300 x 200
Grade
0 0 0 0 0
08114025
Order number
Grade 1 08114026 08114027 08114028 08114029 08114030
Dimensions
mm 75 x 50 100 x 70 150 x 100 200 x 130 300 x 200
Grade
1 1 1 1 1
08114032
Order number
Grade 0 08114031 08114032 08114033 08114034 08114035
Dimensions
mm 75 x 50 100 x 70 150 x 100 200 x 130 300 x 200
Grade
0 0 0 0 0
Order number
Grade 1 08114036 08114037 08114038 08114039 08114040
Dimensions
mm 75 x 50 100 x 70 150 x 100 200 x 130 300 x 200
Grade
1 1 1 1 1
08114033
Order number
Grade A 08124001 08124002 08124003 08124004 08124005
Dimensions
mm 3" 4" 6" 9" 12"
Grade
A A A A A
08124003
Order number
Grade B 08124006 08124007 08124008 08124009 08124010
Dimensions
mm 3" 4" 6" 9" 12"
Grade
B B B B B
DOubLE SQuARE
DIN 875. Graduation to the 8ths, 16ths, 32nds and 64ths. Cast head, satin chrome blades. Supplied in a suited carton box with inspection report. 08134200
Order number Dimension of the blade
in 08134200 4
Perpendicularity
larity 3
Planarity Straightness
m 2
SCRIbING GAuGES
www.standardgage.com 69
57
R6,5
57
15,7
12,7
8
9
75
07714001
Order number
Metric models 07714001 07714002 Inch models 07724001 07724002
Measuring range
mm 300 600 in 12 24
Scale division
mm 0,01 0,02 in 0.001 0.001
10,5
Scriber
10,5
R6,5
100
13
41
40
50
70
07734001
Order number
07734001 07734002
Measuring range
left scale 0 300 mm 0 500 mm right scale 0 12 in 0 20 in
Vernier reading
left scale 0,02 mm 0,02 mm right scale 0.001 in 0.001 in
12
12
Scriber
057139 057140
15,7
12,7
75
Order number
07734003 07734004 057143
Measuring range
mm 300 600 in 12 24
Scriber
057137 057137
07734003
ANGLE PROTRACTOR
www.standardgage.com 73
Scriber
5
Blades Length
300 mm / 12 in
00634001
00634001
4 x 90
00634002
Scriber
5
Blades Length
6 in / 12 in
00634003
Scriber
5
Blades Length
6 in / 12 in
LEVELS
www.standardgage.com
75
Order number
05334001
Measuring range
4 x 90
Reading
0.05
Dimensions (L x W x H)
9 x 1 x 2-1/4
05334001
ELECTRONIC INCLINOmETER
Embedded magnet on both sides and the bottom. Hold feature. Reversible reading for inverted use. Precision : 0.2 Repeatability : 0.05 Standard 9V battery.
Order number
05334002
Measuring range
4 x 90
Reading
0.05
Dimensions (L x W x H)
2.375 x 1.375 x 2.375
05334002
05334010
Length
100 mm
Measuring range
4 x 90
Reading
0.1
DIAL GAuGES
www.standardgage.com
77
01434002
56
19
8 h6 4,5
Scale division
mm 0,01 0,01 in 0.0005 0.0005
MPE
m 20 20
Repeatability
m 10 10
01434001
Measuring range
mm 12,5 25 in 0.5 1
Scale division
mm 0,001 0,001 in 0.00005 0.00005
MPE
m 4 5
Repeatability
m 2 2
01434003
120
40
8 4 M 2,5
15,5
01414001
Order number
01414001 01414002
Measuring span
3 mm 5 mm
Reading
0,01 mm 0,01 mm
Travel/Rev.
1 mm 1 mm
Movement
6 Jewelled 6 Jewelled
Circular scale
0 50 100 0 50 100
01414030
Order number
01414030
Measuring span
1 mm
Scale division
0.001 mm
Measuring spans
Scale division Deviation span of indication Total deviation span of indication Hystrsis max. Deviation span of indication (local deviation span of 0,1 mm) Repeatability limit
1 mm
0.001m 5 m 6 m 3 m 3 m 0.3 m
58
58 8 h6 4
6
01414010
01414013
Order number
01414010 01414011 01414012 01414013 01414014 01414015
Measuring span
10 mm 10 mm 10 mm 10 mm 20 mm 30 mm
Scale division
0,01 mm 0,01 mm 0,01 mm 0,01 mm 0,01 mm 0,01 mm
Circular scale
0 50 100 0 50 100 0 50 100 0 50 100 0 50 100 0 50 100
Movement
18
01414015
105
58
01414020 01414021
8 h6 4
Order number
01414020 01414021 01414022 01414023
Measuring span
3 mm 3 mm 5 mm 5 mm
Scale division
0,001 mm 0,002 mm 0,001 mm 0,002 mm
Circular scale
0 10 20 0 10 20 0 10 20 0 10 20
18
105
Movement
Ruby Shockproof Ruby Shockproof Ruby Shockproof Ruby Shockproof
Standard accessories
Order number 01464001 1464002 Description Central lug back for indicators with a 40 mm dial diameter Central lug back for indicators with a 58 mm dial diameter
01424011
Scale division
0.001 in 0.001 in 0.0005 in
Dial face
white black white
Movement
Ruby Shockproof
01424012
LEVER INDICATORS
www.standardgage.com 85
17
20
55
01814013
01814010
Scale division
Deviation span of indication Total deviation span of indication Hysteresis max. Deviation span of indication(local measuring span 0,1 mm) Repeatability limit 0,01 mm 10 m 13 m 3 m 5 m 3 m 0,002 mm 2 m 3,5 m 2 m 1 m 1 m
Dial face
white white white white white white white white
Contact
Diameter 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm Materials Carbide Carbide Ruby Ruby Carbide Cabide Ruby Ruby Length 19 mm 19 mm 19 mm 19 mm 19 mm 19 mm 19 mm 19 mm
32
20
55
32
01824006 01824001
Scale division
Deviation span of indication Total deviation span of indication Hysteresis max. Deviation span of indication(local measuring span 0,1 mm) Repeatability limit 0.001 / 0.005 in 0.4 in 0.5 in 0.12 in 0.2 in 0.12 in 0.0001 in 0.08 in 0.14 in 0.08 in 0.04 in 0.08 in
Dial face
white black white black white black white black white black
Contact
Diameter 0,08 in 0,08 in 0,08 in 0,08 in 0,08 in 0,08 in 0,08 in 0,08 in 0,08 in 0,08 in Materials carbide carbide carbide carbide carbide carbide carbide carbide carbide carbide Length 0.7 in 0.7 in 0.7 in 0.7 in 0.7 in 0.7 in 0.64 in 0.64 in 0.64 in 0.64 in
STANDS/bLOCkS/ PARALLELS
www.standardgage.com 89
01664001
01664003
Order number
01664001
Description
Magnetic stand Articulated arm Flexible arm
01664002
01664002 01664003
SET Of PARALLELS
4 pairs of parallels. Accuracy : 0.005 mm. Matched accuracy : 0.005 mm. Holes : = 7.93 mm. Provided in a plastic case.
Order number
06764020
Description
4 pairs parralels set
Set compositions
Width
mm 25.40 31.75 38.10 44.45 in 1 1-1/4 1-1/2 1-3/4
length
mm 152.40 152.40 152.40 152.40 in 6 6 6 6
Thickness
mm 4.76 4.76 12.70 12.70 in 3/16 3/16 1/2 1/2
Pieces
2 2 2 2
06764020
Order number
06764001
Description
Set of two blocks one hole
06764001
06764002
Dimensions
25.4x50.8x76.2 mm 1x2x3 50.8x101.6x152.4 mm 2x4x6
Holes
18x 8.9 mm 5x M8.5
Pieces
2
COmPARATOR GAuGES
www.standardgage.com 93
Order number
Measuring range
mm in 06 0 150
07934200
07934200
Order number
07934201
Measuring range
mm 12 150 in 0.5 6
07934201
Reading
0,01 mm 0,01 mm 0,01 mm 0,01 mm
Accuracy
0.02 mm 0.02 mm 0.02 mm 0.02 mm
Repeatibility
0.01 mm 0.01 mm 0.01 mm 0.01 mm
05714001
05714010
Order number
05714010
Measuring range
50150 mm
Reading
0,01 mm
Accuracy
0.02 mm
Repeatibility
0.01 mm
AuxILIARy fIxTuRES
www.standardgage.com 97
00224200
Order number
00224200
Designation
Thread wires gauges for US 60
Thread
348 thread per in
Pieces
48
OPTICAL mEASuREmENTS
www.standardgage.com 99
Clamp system Your Visual 250 can be used in conjunction with VISUALFIX. This modular system includes a number of clamping elements available in either of both kits as below: VISUALFIX kit, including 35 elements (06860317) STANDARD VISUALFIX kit, including 51 elements (06860316) Software VISUAL GAGE allows quick and accurate measurement of nearly all geometrical part features. This software can equally be run by a trained operator or a metrologist. It provides the user-friendliness and flexibility needed to create the measurement reports. Training takes just half a day. A clearly arranged Users interface makes this vision machine most easy to use.
Technical data
Order number Releasable X- and Y-axis Measuring range (X/Y) Z-Displacement Maximum workpiece weight Accuracy MPExy (Ex, Eu) MPExy (Exy)
*m5 kg, uniformly distributed
06834700
Camera and Optics CCD colour camera, 752 x 582 pixels Indexable zoom (0,7x up to 4,5x) Diascopic illumination, green LED Ringlight with a white LED Laser pointer Additional data Calibration Weight (w/o monitor and computer) Power supply Overall dimensions of the machine alone (LxHxD) Reference temperature Operating temperature range Relative humidity VISUAL GAGE application software Provided with monitor and computer at 10 mm 180 kg 115 to 230 Vac 10%, 50 to 60 Hz 716 x 1015 x 753 mm 20C 1C 10C to 40C < 80%, non-condensing