Professional Documents
Culture Documents
Micro Tools
Proxxon MF 70 Milling Machine
This is a super little machine, well suited to modelling work and for the manufacture of small precision components in a variety of materials. The extruded aluminium compound table has low backlash leadscrews and adjustable gib plates for smooth, accurate movement. Supplied complete with a set of six collets of 1.0mm, 1.5mm, 2.0mm, 2.4mm, 3.0mm, 3.2mm diameter and a work clamping kit. An optional set of solid carbide cutters is available, sizes 1.0mm, 2.0mm and 3.0mm. Milling cutter
set 327116
Shown with BFB200 Drill Stand, KT150 Table and Clamp Set (these items not included)
Inc.vat 37.50
Ex.vat 31.25
Code 475173
Model Rating Power Spindle Speed Nose of Spindle to Table (Max) Longitudinal Table Movement Lateral Table Movement Table Size Base Size Overall L x W x H Weight
MF70 Light Trade 100W 5,000-20,000rpm 135mm 134mm 46mm 200 x 70mm 130 x 225mm 270 x 270 x 340mm 7kg
Engineering Courses
Inc.vat 172.50
Ex.vat 143.75
Code 474330
MF70 Milling Machine 240V Dividing Head Milling Cutter Set 3.2mm Keyless Chuck
Our Engineering Course introduces students to the techniques required for either a small engineering lathe or engineer's mill. Aimed at the complete beginner, the course will provide a step by step guide of how to set up and use either of these machines safely and constructively. A very popular course!
For information on our Engineering Courses please contact
Dividing Head
Inc.vat 102.50
Ex.vat 85.42
Code 474592
Inc.vat 176.50
Ex.vat 147.08
Code 474334
www.axminsterskillcentre.co.uk
141
Micro Mills
Inc.vat Ex.vat FF 500 Micro Miller 1,869.50 1,557.92 Splash Guard & Chip Collecting Tray 134.95 112.46 5 Piece Collet Set 109.50 91.25
Inc.vat 77.50
Ex.vat 64.58
Code 474685
Inc.vat 109.50
Ex.vat 91.25
Code 474527
142
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Micro Mills
Axminster SIEG Super X1 Micro-Mill MkII
This miniature mill is a two function machine, operating either as a vertical mill or as a small pillar drill. The work can be either clamped directly onto the table with the aid of T nuts, studs and clamping bars, or held in a suitable machine vice and then moved under the rotating milling cutter using the traversing controls on the table. There is a choice of coarse handle feed of the quill for drilling or fine screw control for precise setting of the milling cutter depth. The column can be tilted by up to 45 either side of vertical for angled machining. The choice of two spindle speed ranges, both with electrically variable control, gives considerable freedom in cutter diameter and material type. Although small in size, this machine, with its predominantly cast iron construction, is man enough to tackle a whole range of small tasks in the home engineers workshop and is an excellent companion to the Micro Lathe. Supplied with 10mm capacity chuck, chuck key, drawbar and service tools. Drawbar thread is M10. Model SIEG X1 Rating Hobby Power 150W Spindle Speed Variable 100-1,000 & 100-2,000rpm Spindle Taper 2MT Nose of Spindle to Table (Max) 255mm Head Tilt 45 Left & Right Longitudinal Table Movement 180mm Lateral Table Movement 90mm Table Size 240 x 145mm Overall L x W x H 430 x 355 x 715mm Weight 32kg
Inc.vat 60.95
Ex.vat 50.79
Code 200115
Mini Mills
Axminster SIEG X2 Mini Mill
A fine, high precision milling machine, an ideal companion to the C2A lathe. Constructed in cast iron with a finely ground table, ground and hardened slideways and a variable speed spindle drive. The milling head and column can tilt to 45 left or right for angle drilling or slotting. The spindle drive comes from a 350W motor via a 2 speed gearbox and variable speed, giving speed ranges of 100 - 1100rpm (L) / 100 - 2500rpm (H). The headstock quill has a fine downfeed control feature for milling and a rack and pinion downfeed system for drilling. The table leadscrews are covered for protection against swarf and debris. This is a superb, small mill for the model engineer or possibly school use. Model SIEG X2 Rating Light Trade Power 350W Spindle Speed 100 - 1,100rpm (L) / 100 - 2,500rpm (H) Spindle Taper 3MT Nose of Spindle to Table (Max) 280mm Head Tilt 45 Left & Right Longitudinal Table Movement 220mm Lateral Table Movement 100mm Throat 170mm Table Size 390 x 92mm Overall L x W x H 520 x 500 x 760mm Weight 50kg
Inc.vat 92.95
Ex.vat 77.46
Code 100034
143
Mini Mills
Axminster 100mm Rotary Table Axminster SIEG SC2/SX2 Spindle Speed Read-out
This is a digital read-out of the spindle speed, suitable for the SC2 and SX2 machines only. Self powered, it plugs into the provided socket and has magnets on the rear to allow placement on the headstock where convenient. Allows accurate setting of the spindle speed and takes the guesswork from your machining. A 100mm diameter rotary table equipped with four tee slots and faces at right angles to allow for either horizontal or vertical mounting on the mill table. The control wheel movement is calibrated down to five minutes per graduation, so some really precise work is possible. A tailstock for horizontal work, an 80mm four jaw chuck and tilting table for angled drilling and milling are also available separately. Height 60mm, centre height 52mm. Perfect for smaller work on most milling machines.
Ex.vat 90.79
Code 211957
Rotary Table 100mm 100061 Rotary Table Tailstock Chuck for 100mm Rotary Table
Inc.vat 33.80
Ex.vat 28.17
Code 200250
Clamping Kit
Inc.vat 46.80
Ex.vat 39.00
Code 100033
Inc.vat SX2 Mini Mill 240V 666.95 SIEG SC2/SX2 Spindle Speed Read-out 108.95 12mm Clamp Kit 42.46
Inc.vat 59.95
Ex.vat 49.96
Code 200246
Inc.vat 61.50
Ex.vat 51.25
Code 600827
144
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Milling Machines
5
Shown in vertical milling/drilling mode with optional floor stand
This is a different type of mill, able to work either vertically or horizontally. Horizontal mills excel at making linear cuts such as slots, shoulders, grooves, splines, keyways and gear teeth. This machine is compact yet powerful. Fitted with the proven 500W DC brushless motor and electronic control from the SX2 mill which gives very high torque, even at the lowest spindle speed. Belt driven and extremely quiet, the belt serving as a shock absorber in the event of a mishap. In vertical mode, the headstock is held in a sliding overhead arm, which allows the spindle to be placed over the bed to the required positions. The headstock also tilts 45 left or Model SU1 right. The spindle has a speed Rating Light Trade range of 200-2,000rpm. Power 500W (230V) Unusually, the table has a Spindle Speed 200-2,000rpm vertical rise and fall, allowing Spindle Taper MT3 ample clearance under the Nose of Spindle to Table (Max) 150mm spindle. The table surface is Head Tilt 45 Left and Right precision ground and has Longitudinal Table Movement 300mm 12mm T slots. To change from Lateral Table Movement 92mm vertical to horizontal mode Table Size 460 x 120mm takes around 2 minutes and an Overall L x W x H 594 x 740 x 596mm arbor is provided to take Weight 95kg slotting cutters etc. All sliding Inc.vat Ex.vat Code faces are dovetailed and SIEG SU1 Universal Mill 984.50 820.42 953498 adjustable for accuracy, SIEG SU1 Floor Stand 251.95 209.96 953499 ensuring a long life. For the SIEG SU1 63 x 3mm Milling Cutter 15.20 12.67 953501 hobby model engineer who SIEG SU1 50 x 4mm Milling Cutter 20.30 16.92 953502 needs to take advantage of the horizontal milling facility this SIEG SU1 Saw Tooth Cutter 50 x 1mm 34.80 29.00 953503 machine could be invaluable. SIEG SU1 Saw Tooth Cutter 50 x 1.25mm34.80 29.00 953504
42.46
35.38
951675
42.46
35.38
951675
Inc.vat 242.99
Ex.vat 202.49
Code 953507
145
Milling Machines
SIEG X3 Trade 600W 100-1,000 & 100-2,000rpm 3MT 380mm 400mm 145mm 550 x 160mm 340 x 430mm 685 x 560 x 830mm 165kg
241.00
Ex.vat 200.83
Code 950689
146
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Milling Machines
Axminster SIEG SX4 Tilt Head Mill Drill Axminster ZX25M2 Vertical Mill/Drill
This is an excellent value for money vertical mill/drilling machine, which could be just the job for any small workshop where there is the need to produce small metal components. The arbor is driven by a 750W motor through a double V-belt and pulley system which gives a choice of 12 speeds in the range 90 to 2,150rpm. There is a micro switch on the belt guard which ensures that the motor cannot run with the guard open. The complete head can be moved up and down the column by means of a rack-and-pinion drive and, once in position, is held securely with two clamp bolts. The quill, which carries the chuck or the end mill holder, can be moved either with the normal down-feed handle on the side of the head for coarse movement or, with the handle locked, by means of the calibrated fine downfeed handle. The table, which has three T-slots for securing the work directly or in a milling vice, is positioned in Pictured on the two horizontal axes with large diameter optional stand control wheels calibrated with metric graduations. There are two movable stops on the front face of the table which can be locked in position to limit the length of travel of the table. The machine can either be mounted on a suitable heavy duty bench or on the optional stand. Standard equipment includes a 63mm diameter facing cutter, 13mm capacity drill chuck and arbor, spanners and drift for removing the drill chuck. There is a full range of end mills and end mill holders fully detailed later on in this section. N.B. All graduations are in metric. Another useful accessory is the power feed unit (700095), which can be fitted to the left hand end of the table to provide a smooth variable speed drive to the traverse travel. The optional stand is made of Model ZX25M2 heavy duty steel sheet and Rating Trade measures 710mm high, 545mm Power 750W wide and 610mm deep. Spindle Speed 12 from 90 to 2,150rpm N.B. The ZX25M2 mill is Spindle Taper 3MT graduated METRIC only. Nose of Spindle to Table (Max) 380mm Longitudinal Table Movement 370mm Lateral Table Movement 160mm Table Size 585 x 190mm Overall L x W x H 1,320 x 900 x 960mm (1,700mm on stand) Weight 220kg
The largest machine in our SIEG range has all the features you need to take on the most demanding projects. Made almost entirely in cast iron with a dovetail column for huge strength and rigidity. Fitted with a high torque 1,500W brushless DC motor with electronic variable speed. The spindle has an R8 taper and a speed range of 100-1,600rpm. There are digital displays for spindle speed, spindle height and head angle for ease of machine setting. The headstock is fitted with power elevation, no more vigorous hand cranking. It can also tilt 90 right and 45 left. A fine downfeed control for milling and a course feed for drilling are fitted. There are switch controls on the handles for through tapping. All controls are grouped on the headstock for ease of use. The table is a massively constructed, with a ground surface and a coolant Model trough with a drain outlet. An Rating optional Y axis power feed and Power a sturdy floor stand are Spindle Speed available. This machine is a Spindle Taper much better choice than the Nose of Spindle to Table (Max) more usual round column Head Tilt designs, far more accurate and Longitudinal Table Movement able to undertake complex Lateral Table Movement projects. Table Size Overall L x W x H Weight
SX4 Trade 1,500W (230V) 100-1,600rpm R8 400mm 90 Right, 45 Left 410mm 245mm 240 x 820mm 1,060 x 835 x 1,080mm 310kg
SIEG SX4 Tilt Head Mill SIEG SX4 Floor 14mm Clamp Kit R8 ER32 Collet Holder
Inc.vat Ex.vat 2,829.50 2,357.92 355.00 295.83 43.99 36.66 28.15 23.46
Inc.vat 242.99
Ex.vat 202.49
Code 953500
Inc.vat 214.50
Ex.vat 178.75
Code 700095
147
Milling Machines
148
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Sliding headstock
Pivoting headstock
Inc.vat 331.00
Ex.vat 275.83
Code 951559
X6323A Universal Mill 230V APF500 Y Axis Powerfeed ISO30-End Mill Cutter ISO30-MT3 Adaptor ISO30-R8 Adaptor
5,249.50 4,374.58 369.00 307.50 78.50 65.42 19.99 16.66 44.70 37.25
149
X2 100mm Vice
Inc.vat 59.50
Ex.vat 49.58
Code 600547
12mm Clamp Kit 14mm Clamp Kit 16mm Clamp Kit 18mm Clamp Kit
Machine Vice 50mm Machine Vice 75mm Machine Vice 100mm Machine Vice 150mm
Mill/Drill Vice
Inc.vat 48.50
Ex.vat 40.42
Code 953006
Inc.vat 59.95
Ex.vat 49.96
Code 200246
Inc.vat 101.50
Ex.vat 84.58
Code 600546
Clamping Kit
Inc.vat 46.80
Ex.vat 39.00
Code 100033
A 100mm diameter rotary table equipped with four tee slots and faces at right angles to allow for either horizontal or vertical mounting on the mill table. The control wheel movement is calibrated down to five minutes per graduation, so some really precise work is possible. A tailstock for horizontal work, an 80mm four jaw chuck and tilting table for angled drilling and milling are also available separately. Height 60mm, centre height 52mm. Perfect for smaller work on most milling machines.
Inc.vat 37.50
Ex.vat 31.25
Code 475173
Rotary Table 100mm 100061 Rotary Table Tailstock Chuck for 100mm Rotary Table
150
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat 44.40
Ex.vat 37.00
Code 200251
The 110mm table is available in a package with the tailstock and indexing plates.
Inc.vat 54.95
Ex.vat 45.79
Code 211557
Indexing Plates
Inc.vat 44.40
Ex.vat 37.00
Code 200248
Inc.vat 54.95
Ex.vat 45.79
Code 211558
The 150mm table is available in a package with the tailstock and indexing plates.
Inc.vat 169.96
Ex.vat 141.63
Code 211556
151
RF Power Feed
Inc.vat 296.50
Ex.vat 247.08
Code 340207
Remote Reader
Inc.vat 59.95
Ex.vat 49.96
Code 210068
Vertical 100mm(4) Vertical 150mm(6) Horizontal 150mm(6) Vertical 200mm(8) Horizontal 200mm(8) Horizontal 300mm(12)
Inc.vat 198.95
Ex.vat 165.79
Code 950942
Inc.vat 8.26 8.26 8.26 8.26 8.26 8.26 8.26 8.26 8.26 8.26 8.26 91.50 23.99 26.60 7.60
Ex.vat 6.88 6.88 6.88 6.88 6.88 6.88 6.88 6.88 6.88 6.88 6.88 76.25 19.99 22.17 6.33
Code 910205 910206 910207 951823 910209 910210 910211 910212 910213 910214 910215 910204 951543 910250 910254
Inc.vat 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 103.50 26.60 7.60
Ex.vat 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 7.46 86.25 22.17 6.33
Code 910217 910218 910219 910220 910221 910222 910223 910224 910225 910226 910227 910228 910229 910230 910216 910251 910255
Inc.vat 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 128.95 28.15 28.15 129.95 8.70 6.60
Ex.vat 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 7.92 107.46 23.46 23.46 108.29 7.25 5.50
Code 910233 910234 910235 910236 910237 910238 910239 910240 910241 910242 910243 910244 910245 910246 910247 910248 910249 910232 910252 910231 211901 910256 910257
152
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat 5.75
Ex.vat 4.79
Code 340307
2MT Chuck & Collets Metric 3MT Chuck & Collets Metric 4 Imperial Collets 4 Metric Collets
Inc.vat 6.60
Ex.vat 5.50
Code 810262
Fly Cutter Set 3/16 Square x 3 5% Cobalt Tool Steel 1/4 Square x 4 5% Cobalt Tool Steel 5/16 Square x 4 5% Tool Steel
This precision boring head is the perfect tool for boring out very accurate holes on a vertical mill or indeed a lathe. The combination of five different sized boring bars and three mounting holes gives a wide range of boring capacities; for example a bar mounted in the central hole will bore from 9mm diameter upwards by 38mm long, whilst a bar in the side hole will bore up to 100mm diameter by about 60mm deep. The movable part of the head can be adjusted down to 0.0005 (0.0127mm) with the aid of the calibrated adjusting screw and a hexagon key. Two mounting arbors are supplied, 2MT and 3MT, both with 3/8 Whitworth drawbar threads. The whole kit is housed in a wooden box. Very useful and excellent value for money. Takes 1/2 shank tools. A set of TCT tipped tooling is available, set number 201000.
Inc.vat 64.50
Ex.vat 53.75
Code 100060
Inc.vat 78.50
Ex.vat 65.42
Code 211903
Inc.vat 6.60
Ex.vat 5.50
Code 953411
ISO30-R8 Adaptor
An ISO30 -R8 adaptor to fit the 211590 X6323A Milling Machine. Enables all R8 mill tooling to be used. Made to an extremely high accuracy standard.
ISO30-R8 Adaptor
Inc.vat 44.70
Ex.vat 37.25
Code 211599
ISO30-MT3 Adaptor
Boring Bar Set CCMT06 Replacement Tip TCMT Replacement Tip Spare Torx M2.5 Screw T8 Torx Key Inc.vat 90.95 4.70 4.30 2.60 2.20 Ex.vat 75.79 3.92 3.58 2.17 1.83 Code 201000 201001 201002 201019 201020
An ISO30 -MT3 adaptor to fit the 211590 X6323A Milling Machine. Enables all drawbar type MT3 mill tooling to be used. Made to an extremely high accuracy standard. Draw bar fitting for added security.
ISO30-MT3 Adaptor
Inc.vat 19.99
Ex.vat 16.66
Code 211598
Inc.vat 31.15
Ex.vat 25.96
Code 951772
153
2 x 1/64 x 5/8 T100 2 x 1/32 x 5/8 T100 2 x 3/64 x 5/8 T100 2 x 1/16 x 5/8 T100 2 x 1/8 x 5/8 T100
62 teeth. 2 1/2 diameter. 1 bore
Inc.vat 4.50 4.50 4.50 4.50 4.50 Inc.vat 5.40 5.40 5.40 Inc.vat 6.30 6.30 6.30 6.30 6.30
Ex.vat 3.75 3.75 3.75 3.75 3.75 Ex.vat 4.50 4.50 4.50 Ex.vat 5.25 5.25 5.25 5.25 5.25
Code 510179 510178 510181 510177 510180 Code 510183 510186 510182 Code 510189 510188 510191 510187 510190
Small workshops, including those of model engineers, are making increasing use of small vertical milling machines. This book explains how to use them (and lathe milling attachments) in clear terms.
Inc.vat 15.20
Ex.vat 12.67
Code 953501
Book - Pb 93 pages
Code 910446
0 3 x 1/64 x 1 T74 3 x 1/32 x 1 T74 3 x 3/64 x 1 T74 3 x 1/16 x 1 T74 3 x 1/8 x 1 T74
Inc.vat 20.30
Ex.vat 16.92
Code 953502
Inc.vat 43.75
Ex.vat 36.46
Code 110170
HSS Slitting Saw 63 x 22 x 1.0mm HSS Slitting Saw 63 x 22 x 1.5mm HSS Slitting Saw 63 x 22 x 2.0mm HSS Slitting Saw 63 x 22 x 3.0mm HSS Slitting Saw 63 x 22 x 4.0mm HSS Slitting Saw 63 x 22 x 5.0mm HSS Slitting Saw 63 x 22 x 6.0mm
100 teeth. 100mm diameter. 22mm bore
Inc.vat 7.99 8.35 8.80 9.85 10.75 11.30 12.90 Inc.vat 13.45 14.56 18.55 20.20 22.66 26.60 29.65 31.15
Ex.vat 6.66 6.96 7.33 8.21 8.96 9.42 10.75 Ex.vat 11.21 12.13 15.46 16.83 18.88 22.17 24.71 25.96
Code 951697 951698 951699 951700 953401 953402 953403 Code 953404 953405 953406 953407 953408 953409 953410 951772
Inc.vat SIEG SU1 Saw Tooth Cutter 50 x 1mm 34.80 SIEG SU1 Saw Tooth Cutter 50 x 1.25mm 34.80
Inc.vat 87.95
Ex.vat 73.29
Code 700298
HSS Slitting Saw 100 x 22 x 1.0mm HSS Slitting Saw 100 x 22 x 1.5mm HSS Slitting Saw 100 x 22 x 2.0mm HSS Slitting Saw 100 x 22 x 3.0mm HSS Slitting Saw 100 x 22 x 4.0mm HSS Slitting Saw 100 x 22 x 5.0mm HSS Slitting Saw 100 x 22 x 6.0mm 22mm Milling Arbor 3MT
Inc.vat 52.00
Ex.vat 43.33
Code 474926
Glanze 50mm Diameter Face Mill Cutter HSS Slitting Saw Kit
A set of three accurate, high quality high speed steel (HSS) 1.3/4 slitting saw blades, with a flat chisel edge. Supplied complete with a 3/8 pin type mounting arbor. The widths are 1/32 1/16 and , 3/32 Best suited for use in a mill, but can be used in a lathe when . the workpiece is held in a vertical vice/slide. 50mm and 63mm Diameter Glanze Face Mill Cutter complete with 5 top quality carbide inserts (APKT1604, code 951774) plus Torx key. Supplied in a handy fitted carry case.
Inc.vat 24.25
Ex.vat 20.21
Code 953412
50mm Face Mill Cutter 63mm Face Mill Cutter 22mm Milling Arbor 3MT Spare Torx M2.5 Screw T8 Torx Key APKT1604 Carbide Insert
Inc.vat 52.00
Ex.vat 43.33
Code 474927
154
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat 24.55
Ex.vat 20.46
Code 327116
Bull Nose Slot Drill 3mm Bull Nose Slot Drill 4mm Bull Nose Slot Drill 6mm Bull Nose Slot Drill 8mm Bull Nose Slot Drill 10mm
Parallel Set
Inc.vat 102.50
Ex.vat 85.42
Code 953023
3mm End Mill 4mm End Mill 6mm End Mill 8mm End Mill 10mm End Mill 12mm End Mill 16mm End Mill
Slot Drill 3mm Slot Drill 4mm Slot Drill 6mm Slot Drill 8mm Slot Drill 10mm Slot Drill 12mm Slot Drill 16mm
5 litre
Inc.vat 56.95
Ex.vat 47.46
Code 952139
Inc.vat Edge Finder Parallel Shank 20mm 40.99 Heavy duty 12V Alkaline battery 3.30 Heavy Duty Battery R1UG 1.5V (Pkt 2) 2.90
10mm End Mill 12mm End Mill 16mm End Mill APKT1003 Replacement Tip Spare Torx M2.5 Screw T8 Torx Key
Inc.vat 53.50
Ex.vat 44.58
Code 951771
Inc.vat 27.70
Ex.vat 23.08
Code 475537
155
Inc.vat 21.85
Ex.vat 18.21
Code 220100
Designed as an introduction to the milling machine. The reader will find the projects described within the pages a useful way of extending their knowledge. All the projects are extensively illustrated and include full workshop drawings.
Code 462327
Precision V-Blocks
Inc.vat 36.55
Ex.vat 30.46
Code 475267
Inc.vat 23.80
Ex.vat 19.83
Code 200238
Inc.vat 64.96
Ex.vat 54.13
Code 610121
Hardening & Tempering - Pb 128 pages Electroplating - Pb 61 pages Drills, Taps & Dies - Pb 104 pages Workholding in the Lathe - Pb 112 pages Electric Motors - Pb 134 pages Gears & Gear Cutting - Pb 135 pages Vertical Milling - Pb 93 pages Machining Hints & Tips - Pb 95 pages The Backyard Foundry - Pb 104 pages Workshop Hints & Tips - Pb 128 pages Screwcutting - Pb 176 pages Milling Operations - Pb 128 pages Art of Welding - Pb 95 pages Soldering & Brazing - Pb 136 pages Lathework: A Complete Course - Pb 196 pages
Zero vat 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 7.95
Code 910440 910441 910442 910443 910444 910445 910446 910447 910449 910450 910451 910452 910453 910454 362303
Engineering Lathes
Proxxon 4 Jaw Independent Chuck for PD 230/E
The 4 jaws are adjusted independently, thus clamping asymmetrical pieces, ovals, squares and odd shaped workpieces. 80mm capacity.
Inc.vat 174.95
Ex.vat 145.79
Code 474335
Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow easy cleaning. Mounting hole and raised base to secure lathe are pre-drilled. Length 495mm, width 215mm, height 150mm.
Inc.vat 112.50
Ex.vat 93.75
Code 474487
Inc.vat 66.50
Ex.vat 55.42
Code 474783
156
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Engineering Lathes
Proxxon Fixed Steady for PD 230/E
Used when turning long, slender pieces, capacity up to 40 mm. Also used when the tailstock cannot be utilised.
Fixed Steady
Inc.vat 49.60
Ex.vat 41.33
Code 474968
Inc.vat 91.50
Ex.vat 76.25
Code 474591
Inc.vat 14.45
Ex.vat 12.04
Code 476342
Set includes column (35 x 400mm), mounting bracket and bolts. The mounting position on the PD230/E is already milled. The lathes top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 6mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the micro FF230. Three collets of sizes 6,8 and 10mm are included.
Code 474027
Inc.vat 84.50
Ex.vat 70.42
Code 474644
Quick-Change Holder
Inc.vat 16.00
Ex.vat 13.33
Tailstock Chuck
Inc.vat 33.35
Ex.vat 27.79
Code 475337
Ex.vat 124.13
Code 474357
Inc.vat 212.00
Ex.vat 176.67
Code 474232
Inc.vat 66.50
Ex.vat 55.42
Code 474789
Inc.vat 291.50
Ex.vat 242.92
Code 474174
157
Engineering Lathes
Proxxon Faceplate & Clamps for PD 400
This accessory is used in the place of the standard chuck and mounts larger and asymmetrical workpieces. Diameter of 130mm, with two through T-slots, as well as mounting clamps.
Fixed Steady
Inc.vat 66.95
Ex.vat 55.79
Code 474790
Inc.vat 222.95
Ex.vat 185.79
Code 474233
Inc.vat 65.50
Ex.vat 54.58
Code 474823
Travelling Steady
Technical Data: 220 - 240V. 140W. 50-60Hz. Spindle revolutions 280 - 550 - 870 1,200 - 1,500 und 2,200rpm
Inc.vat 962.00
Ex.vat 801.67
Code 474045
Inc.vat 73.96
Ex.vat 61.63
Code 474706
Inc.vat 333.00
Ex.vat 277.50
Code 474129
Inc.vat 33.35
Ex.vat 27.79
Code 475338
Cutter Set with Tungsten Inserts Tungsten Disposable Tips (Pkt 10)
Steady Rest
Inc.vat 22.50
Ex.vat 18.75
Code 600518
Auto Feeder
Inc.vat 30.30
Ex.vat 25.25
Code 600519
Compound Slide
Inc.vat 28.25
Ex.vat 23.54
Code 600520
Inc.vat 296.95
Ex.vat 247.46
Code 600517
Inc.vat 13.99
Ex.vat 11.66
Code 600521
158
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Engineering Lathes
Revolving Centre
Inc.vat 18.20
Ex.vat 15.17
Code 600522
Inc.vat 31.00
Ex.vat 25.83
Code 600523
Model Rating Power Spindle Speed Taper Headstock Taper Tailstock Centre Height Distance Between Centres Leadscrew Pitch Thread Pitch Range Overall L x W x H Weight
Face Plate
Inc.vat 10.60
Ex.vat 8.83
Code 600524
SIEG C1 MICRO Hobby 150W 100-2,000rpm 2MT 1MT 70mm 250mm 1.5mm 0.5, 0.7, 0.8, 1.0, 1.25mm (Change wheel set required) 630 x 330 x 210mm 22kg
Inc.vat 450.50
Ex.vat 375.42
Code 600882
110mm Faceplate
Inc.vat 33.30
Ex.vat 27.75
Code 100025
Tailstock Chuck
Inc.vat 19.66
Ex.vat 16.38
Code 600570
Inc.vat 60.95
Ex.vat 50.79
Code 200115
Inc.vat 13.75
Ex.vat 11.46
Code 100030
Axminster SIEG C1 Hard Centres Axminster SIEG C1 80mm Four Jaw Independent Chuck
Used for mounting square, non circular and irregular shaped items in the Axminster SIEG Micro Lathe. The four jaws are individually adjustable with the aid of the square key. Outside diameter is 80mm. Centres are used for the accurate location of work between the headstock and the tailstock. Two hard centres are available for the Micro Lathe: No 2MT for the headstock (with the chuck and mounting plate removed). No 1MT centre for the tailstock.
Inc.vat 57.00
Ex.vat 47.50
Code 953431
Inc.vat 76.96
Ex.vat 64.13
Code 100021
159
Engineering Lathes
Tailstock Chuck
Inc.vat 21.10
Ex.vat 17.58
Code 100031
Vertical Slide
Inc.vat 92.95
Inc.vat 572.50
Ex.vat 477.08
Code 600550
Compound Slide
Inc.vat 106.00
Ex.vat 88.33
Code 100029
Model Rating Power Spindle Speed Taper Headstock Taper Tailstock Centre Height Distance Between Centres Cross Slide Travel Overall L x W x H Weight
SC2 Light Trade 500W 100-2,500 rpm 3MT 2MT 90mm 300mm 62mm 720 x 300 x 290mm 43kg
Inc.vat 34.90
Ex.vat 29.08
Code 100022
Inc.vat SC2 Mini Lathe 240V 635.00 SIEG SC2 Carriage DRO 116.50 SIEG SC2/SX2 Spindle Speed Read-out 108.95
160
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Engineering Lathes
Axminster SIEG C1 & C2 5 Piece Cutting Tool Set
A small get you started set of metal turning tools. Covering facing and spigot turning, these 8mm square shanked tools are great will any small bench mounted lathe.
Inc.vat 18.90
Ex.vat 15.75
Code 600824
Axminster SIEG C2, C3 Rocker Tool Post Axminster SIEG SC2/SX2 Spindle Speed Read-out
This is a digital read-out of the spindle speed, suitable for the SC2 and SX2 machines only. Self powered, it plugs into the provided socket and has magnets on the rear to allow placement on the headstock where convenient. Allows accurate setting of the spindle speed and takes the guesswork from your machining. The Rocker Tool Post is designed to eliminate the need for shimming, particularly of older lathe tools that have been sharpened many times. The height of the cutting edge can be changed by simply adjusting the two clamping screws, to set the tools cutting edge on or just slightly below the centre line of the part being machined. This excellent value accessory reduces setup time and also extends the life and the usefulness of your older lathe tools.
Inc.vat 18.70
Ex.vat 15.58
Code 600823
Ex.vat 90.79
Code 211957
Inc.vat 37.70
Ex.vat 31.42
Code 600825
C2 Faceplate
Inc.vat 23.15
Ex.vat 19.29
Code 600553
Inc.vat 147.50
Ex.vat 122.92
Code 600900
Inc.vat 56.00
Ex.vat 46.67
Code 953430
C2 Clamp Kit
Inc.vat 12.16
Ex.vat 10.13
Code 600554
C2 Lathe Dog
Inc.vat 7.30
Ex.vat 6.08
Code 600557
Inc.vat 116.50
Ex.vat 97.08
Code 211956
Inc.vat 62.00
Ex.vat 51.67
Code 600555
Inc.vat 95.50
Ex.vat 79.58
Code 718054
161
Engineering Lathes
C2/SC2 Holder for ER32 Collets ER32 collets & collet holder kit
Code 600856
C2 Travelling Steady
C2 Fixed Steady
Inc.vat 33.30
Ex.vat 27.75
Code 600551
Inc.vat 842.00
Ex.vat 701.67
Code 950166
162
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Engineering Lathes
All accessories fit both C4 and SC4 lathes
SIEG C4 Faceplate
Inc.vat 23.99
Ex.vat 19.99
Code 600862
Inc.vat 39.76
Ex.vat 33.13
Code 600864
Inc.vat 80.99
Ex.vat 67.49
Code 950690
Inc.vat 91.96
Inc.vat 98.95
Ex.vat 82.46
Code 600869
Milling Attachment
Inc.vat 298.96
Ex.vat 249.13
Code 600857
Inc.vat 14.20
Ex.vat 11.83
Code 600863
C4 Floor Stand
Inc.vat 154.96
Ex.vat 129.13
Code 600867
Inc.vat 527.95
Ex.vat 439.96
Code 951542
163
Engineering Lathes
Axminster SIEG C6 Quick Change Tool Post
A quick change tool post with three tool holders for the C6 lathe. Easy to use and adjusts to the correct tool tip height without messing around with shims or spacers under the tool. Replaces the standard tool post supplied with the machine.
Inc.vat 83.50
Ex.vat 69.58
Code 600610
Inc.vat 108.95
Ex.vat 90.79
Code 210025
Inc.vat C6 Holder for ER32 Collets 85.96 ER32 collets with holder for C6B - Set 7 126.50
Engineers Lathes
Runmaster 330RR X 1000 High Speed Precision Lathe Axminster SIEG CQ6230B/910 Metal Turning Lathe
A high specification, floor standing, heavy duty metal turning lathe suitable for the keen model engineer, general maintenance and small production facilities. Featuring a precision ground, induction hardened bed, fully gear driven spindle with hardened and ground gears giving a speed range of 75 - 1,400rpm, selectable via the front of headstock mounted gear selection levers. A 1,500W single phase motor, taper roller spindle bearings, range of cross and longitudinal feed speeds selected on a separate gearbox, thread indicator, spindle foot brake, chuck guard safety interlock, guarded leadscrew, splash guard, coolant pump system, work lamp, digital read-out on a separate panel. Supplied with a large range of standard accessories including a 150mm(6) 3 jaw self centring chuck, 200mm(8) 4 jaw independent chuck, face plate, live and dead centres. 5 to 3MT reduction sleeve, steady rest, follow rest, quick change tool post with 4 tool holders. Floor stand with oil tray and foot stands. Change gears and toolbox with maintenance tools. The overall capacities are 900mm between centres and 300mm swing over the bed. A gap bed facility gives 450mm swing. Thread cutting facilities in metric with a reversible 3mm pitch leadscrew, the thread indicator giving easy reengagement of the leadscrew in the correct position. Also supplied are change wheels for imperial thread pitches (note the thread indicator is set for metric only). This machine is supplied with everything you will ever need except tooling. As its a single phase machine we have supplied it with a 13A plug thus making it also suitable for the very keen model engineer operating from the home workshop. Model SIEG CQ6230B/910 Rating Trade Power 1,500W Spindle Speed 75 - 1,400rpm Taper Headstock 5MT Taper Tailstock 3MT Centre Height 150mm Distance Between Centres 900mm Cross Slide Travel 160mm Top Slide Travel 760mm Overall L x W x H 1,730 x 540 x 1,450mm Weight 530kg This is a high speed precision lathe built to a very high standard. Based around a deep webbed, cast iron bed with ground, induction hardened slideways providing great rigidity and strength. Powered by a 2.2kW motor driving a headstock gearbox providing 8 speeds from 70-2000 rpm through hardened gears. The spindle is carried on large taper roller bearings, has a D1-4 chuck mount and has a 38mm bore with a 5MT in the nose. A very rigid carriage has power drive on the compound axis and is fitted with a four way tool post that can take tooling up to 16mm in size. The leadscrew pitch is 3mm and is driven by a gear box offering a choice of 32 speeds, in metric or imperial for general turning, and is easily reversible. The change wheel set provided offers a good range of thread cutting choices, 26 metric, 0.4-7mm pitch and 34 imperial, 4-56 tpi. A thread dial indicator is provided to assist in re-engaging the leadscrew in the correct position. The tailstock has a rigid camlock, a taper turning transverse adjustment, a fine pitch leadscrew for the barrel and a 3MT bore. The machine has 24V switch gear, a chuck interlock switch and a foot operated brake for safe operation. With a comprehensive range of standard accessories including work lamp, rear splash back guard, cabinet stand with lockable cupboard, change wheel set, coolant pump and equipment, 6 three jaw chuck with internal and external jaws, live and dead centres, 5-3MT reduction sleeve, travelling steady, fixed steady and a toolbox with comprehensive tool kit plus spare brake shoes and operating cable. This machine is very suitable for educational establishments, maintenance workshops and small production workshops, and will prove to be a pleasure to use. N.B. Requires16A supply Model Rating Power Spindle Speed Taper Headstock Taper Tailstock Centre Height Distance Between Centres Height Over Cross Slide Cross Slide Travel Top Slide Travel Leadscrew Pitch Thread Pitch Range Overall L x W x H Weight 330RR X 1000 Industrial 2.2kW 70-2,000rpm (8) 5MT 3MT 166mm 1,000mm 99mm 165mm 165mm 3mm or 8tpi (26) 0.4-7mm / (34) 4-56 tpi 1,940 x 755 x 1,238mm 610kg
Code 600571
164
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Engineers Lathes
Runmaster 150mm 3-Jaw D1-4 Chuck
A 3-jaw self centring chuck of 150mm diameter. The jaws are reversible and hardened for durability. The chuck has a D1-4 camlock mount, which is very accurate but quick to remove from the lathe spindle. This is an industrial quality chuck for use in an engineering workshop.
Coolant Systems
Axminster Coolant System
The Axminster coolant system consists of a 9 litre coolant tank, single phase electric pump, delivery pipe and a flexible discharge pipe equipped with a magnetic base which makes for easy mounting. A stop cock is provided at the entry to the discharge pipe. The unit may be positioned inside the lathe cabinet, under the bench, or in fact wherever you like as long as you can top it up and clean it out occasionally. An optional safety NVR switch is available separately. The tank is 360mm long, 240mm deep and 170mm high and the overall height including the motor is 310mm.
Inc.vat 274.96
Ex.vat 229.13
Code 600721
Inc.vat 54.00
Ex.vat 45.00
Code 600701
Travel Steady
Inc.vat 133.50
Ex.vat 111.25
Code 600709
150.50
125.42
600567
Fixed Steady
Inc.vat 124.96
Ex.vat 104.13
Code 600702
Inc.vat 95.50
Ex.vat 79.58
Code 600708
400ml
Inc.vat 15.60
Ex.vat 13.00
Code 952140
5 litre
Inc.vat 56.95
Ex.vat 47.46
Code 952139
165
8mm Shank Turning and Facing Tool 10mm Shank Turning and Facing Tool 12mm Shank Turning and Facing Tool 16mm Shank Turning and Facing Tool CCMT06 Replacement Tip Spare Torx M2.5 Screw T8 Torx Key
Boring Bar Set CCMT06 Replacement Tip TCMT Replacement Tip Spare Torx M2.5 Screw T8 Torx Key
6mm Shank Turning Tool Set 8mm Shank Turning Tool Set 10mm Shank Turning Tool Set 12mm Shank Turning Tool Set CCMT06 Replacement Tip Spare Torx M2.5 Screw T8 Torx Key
1MT Hard Centre 2MT Hard Centre 2MT Revolving Centre 3MT Revolving Centre
Inc.vat Ex.vat Threading, Parting & Profile Tool Set 177.50 147.92 External Threading Repl. Carbide Tip 14.45 12.04 Internal Threading Repl. Carbide Tip 14.45 12.04 Parting and Grooving Repl. Carbide Tip 7.50 6.25 Profile Replacement Carbide Tip 7.50 6.25 Spare Torx M2.5 Screw 2.60 2.17 T8 Torx Key 2.20 1.83
Boring Bar - 6 x 80mm Boring Bar - 8 x 100mm Boring Bar - 10 x 110mm Boring Bar - 12 x 125mm Boring Bar 16 x 150mm CCMT06 Replacement Tip Spare Torx M2.5 Screw T8 Torx Key
Inc.vat Parting Tool - 8mm 43.00 Parting Tool - 10mm 43.00 Parting Tool - 12mm 43.00 Parting and Grooving Replacement Carbide Tip 7.50 Spare Torx M2.5 Screw 2.60 T8 Torx Key 2.20
166
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Lathe Tooling
5 Piece Mini Turning Tool Set Glanze Replacement Parting Blade
Spare blade for Glanze clamp type Indexable parting tool. Tips not included. This set of five 10mm shank replaceable tip turning tools is an ideal introduction to tungsten carbide technology for the hobby turner. Operations that can be carried out include left and right hand turning and facing, 45 and 60 chamfering and 60 grooving. The set includes five tools, five tips and a Torx key, all packed in a good quality box. Replacment tips (order No 201002 TCMT) can be ordered separately.
Inc.vat 23.45
Ex.vat 19.54
Code 953165
These Glanze parting and grooving tools are available in both 10 and 12mm shanks. There is a 2mm high quality cutting tip included with the holder to allow cutting straight away.
Inc.vat 10mm 40.25 12mm 40.25 Parting and Grooving Replacement Carbide Tip 7.50 Spare Torx M2.5 Screw 2.60 T8 Torx Key 2.20
Inc.vat 43.75
Ex.vat 36.46
Code 700367
Cutter Set with Tungsten Inserts Tungsten Disposable Tips (Pkt 10)
3 Piece Thread Cutting Set 8mm 3 Piece Thread Cutting Set 10mm
1/4 Square x 4 5% Cobalt Tool Steel 5/16 Square x 4 5% Tool Steel 3/8 Square x 4 Tool Steel 1/2 Square x 4 Tool Steel 1/8 Square x 3 5% Cobalt Tool Steel 3/16 Square x 3 5% Cobalt Tool Steel
167
Lathe Tooling
Tool Grinding Gauge
This surely must be the most useful and simple gauge for anybody grinding tools to cut threads on a metal turning lathe. Made from stainless steel with a satin chrome finish, the permanent deeply etched graduations can be easily read. The gauge clearly indicates 55 for Whitworth and BSF, 60 for metric, unified and American National, 47.1/2 for BA and 14.1/2 for Acme.
Inc.vat 3.35
Ex.vat 2.79
Code 810375
Inc.vat 49.80
Ex.vat 41.50
Code 474932
Inc.vat 22.66
Ex.vat 18.88
Code 700366
Inc.vat 35.56
Ex.vat 29.63
Code 953424
Inc.vat 69.50
Ex.vat 57.92
Code 953423
Inc.vat 2.99
Ex.vat 2.49
Code 340937
1/2 Square Bar 5/8 Square Bar 1/8 Square x 3 5% Cobalt Tool Steel 3/16 Square x 3 5% Cobalt Tool Steel
Inc.vat 17.99
Ex.vat 14.99
Code 310249
Inc.vat 25.00
Ex.vat 20.83
Code 700368
168
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Lathe Tooling
Inc.vat 25.00
Ex.vat 20.83
Code 700369
250ml tin
Inc.vat 13.66
Ex.vat 11.38
Code 701617
Inc.vat 7.40
Ex.vat 6.17
Code 951678
5
Zeus reference tables are the constant companion of most engineers and can be a source of critical information for all practical people. Metric / imperial conversion tables, information of all kinds and much more.
Inc.vat 30.55
Ex.vat 25.46
Code 200229
Book - Pb 24 pages
Code 662422
CNC
Proxxon FF 500 CNC MICRO Mill Proxxon PD 400 CNC Lathe
This is a CNC version of Proxxons popular PD400 lathe and has many features to create a highly accurate, bench top CNC lathe of high quality. Axles drive by step motors and recirculating ball spindles (to avoid reversal backlash). Powerful stepper motors driven in micro steps, guarantee high machining precision and repeat accuracy. For facing and longitudinal turning, for turning balls, radii and any freely formed contours made of steel and non-ferrous metals. Workpiece machining is effected automatically by software and can be reproduced as often as required. Solid, heavy cast iron bed and ground wide-legged precision Vee guide ensure vibrationfree working and optimum precision. Accepts all standard PD400 accessories. Complete with recirculating ball spindles, powerful step motors and the required limit switches, the CNC control unit, all necessary connecting cables and the software on CD-ROM. Operates from any reasonably modern Windows PC, with the ability to accept imported files from CAD programs or create programs manually. Manufactured in Europe, this machine offers an obvious choice for the advanced machinist. Model PD400 CNC Rating Trade Power 550W Spindle Speed 80, 160, 330, 660, 400 & 2,800 rpm Taper Headstock 3MT Taper Tailstock 2MT Centre Height 85mm Distance Between Centres 400mm Height Over Cross Slide 58mm Cross Slide Travel 85mm Overall L x W x H 900 x 460 x 300mm Weight 45kg Precise work with high repeat accuracy. A wide range of uses for single part and small series production. Machining of steel and non-ferrous metals is possible in all dimensions thanks to CNC control of three tool axes. This also applies to larger workpieces. Axes X, Y and Z with recirculating ball spindles (no backlash) and powerful stepper motors. Apart from this, the mechanical construction is almost identical with the MICRO Miller FF 500 available as a manually operated machine. A solid, flat-milled compound table in steel with three continuous T slots for size eight standard T-nuts. The base is constructed in vibrationdamping cast steel. A stable column with dovetail slideway. Swivel-mounted milling head with powerful, quiet and free running condenser motor. Poly V-belt drive for 6 spindle speeds. Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). This can be clamped using a tommy screw when CNC milling. Cutting tool fixing using a chuck. Complete with CNC control unit, CNC programme software, all connecting cables, 6 , 8 , 10 and 12mm chucks and detailed manual. Quiet, good-looking and multi-functional. For repeat accuracies of up to 0.05mm. A machining centre for milling, drilling and countersinking which has yet to be equalled. Made in Europe! Model Rating Power Spindle Speed Weight FF 500 Trade 400W (6) 180 - 2,500rpm 47kg
Inc.vat 56.50
Ex.vat 47.08
Code 700371
4 Piece Set Standard Tool Holder Tool Holder with Vee Groove Parting Blade Holder Tapered Parting Blade
Code 210501
Proxxon FF 500 CNC Micro Mill Splash Guard & Chip Collecting Tray For FF 500
169
CNC
Here at Axminster we are proud to introduce our range of AX CNC metal working machines. Perfect for; the educational sector as well as the hobby/small machine shop. There are two sizes of mill and lathe available with a range of accessories. Please contact our sales teams for full package details.
Code 501007
Code 501008
170
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
CNC
Code 501009
Code 501010
171
Arbor Presses
Axminster Metal Bender Veritas Metal Bender Axminster Arbor Press - AP0
Hand operated arbor press which is very useful for assembling the brass tubes into the wooden blanks of the woodturning project kits. Pressure is firm and uniform and the components are held square whilst being inserted. It has a travel of 114mm and a 19mm square arbor. There are times when you need to bend a metal part, and simply using a vice and some brute force just wont do the job. This metal bender allows anyone to form a metal part with control. The product has two parts: the male die and the V-block. Both are made of high strength malleable cast iron, capable of bending up to 3.2mm(1/8) mild steel. Each piece (about 75mm(3) long by 28mm(1.1/8) wide) clamps itself against a vice jaw using embedded rare earth magnets. The main purpose of the metal bender is to make bends up to 90 for such things as angle brackets and sheet metal parts. Using the V-block on its own, you can securely hold rounds such as rods, tubes and dowels. Combining the V-block with a C-clamp makes easy work of repairing a chair leg. The male die on its own can hold complex curved or concave parts between the jaws. A versatile and inexpensive tool for any workshop. A straightforward and easy to operate, bench mounted or hand held metal bender ideal for bending tubes, solid bar or strip. It is supplied complete in a carrying case with six mandrels for various radii in metal strip and four formers for bending round material or tube. Maximum capacities as follows solid bar - 6mm, pipe and tube - 10mm, strip 40 x 4mm (max 3mm for right angle bends). Overall size (when fully open) 250 x 120mm. The Metal Bender also includes a magnetic angle clamp to help with final assemblies of parts.
5
No 0 Arbor Press
Inc.vat 32.80
Ex.vat 27.33
Code 340041
Metal Bender
Inc.vat 50.50
Ex.vat 42.08
Code 200448
Metal Bender
Inc.vat 19.30
Ex.vat 16.08
Code 476080
No 1 Arbor Press
Inc.vat 44.95
Ex.vat 37.46
Code 340042
Inc.vat 31.25
Ex.vat 26.04
Code 211975
Inc.vat 194.50
Ex.vat 162.08
Code 211662
5 Kilo Anvil
Inc.vat 15.00
Ex.vat 12.50
Code 110149
York Guillotine
Inc.vat 51.95
Ex.vat 43.29
Code 444011
Inc.vat 64.99
Ex.vat 54.16
Code 211976
172
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat 194.99
Ex.vat 162.49
Code 211974
Inc.vat 60.95
Ex.vat 50.79
Code 400099
Inc.vat 200.00
Ex.vat 166.67
Code 900118
Inc.vat 62.50
Ex.vat 52.08
Code 211977
Suction Lifters
A choice of two models, either single or double cup, both being made from strong mouldings fitted with rubber bases. The single cup version is activated by closing the two handles, the double by depressing the individual toggles. Effective on glass or any smooth surface, a very useful item when it comes to moving household appliances around such as fridges or washing machines, just attach a lifter for an instant handle. Pad diameter 115mm(4.1/2), lifting capacities are 40kg for the single, 60kg for the double.
Inc.vat 14.60
Ex.vat 12.17
Code 211978
Inc.vat 433.00
Ex.vat 360.83
Code 810165
173
Riveters
Set of 7
Inc.vat 31.90
Ex.vat 26.58
Code 950131
Inc.vat 13.36
Ex.vat 11.13
Code 810086
Deburring Tool
Inc.vat 18.55
Ex.vat 15.46
Set of 8
Inc.vat 43.75
Ex.vat 36.46
Code 950132
A solid professional tool with an innovative rotating head, mounted on a 45 swivel plate, that can be rotated through a full 360 allowing you to put a rivet into the most awkward of positions without having to be a contortionist. Supplied with wrench and four interchangeable nozzles, the Twister can use the full range of aluminium or up to 4mm steel rivets. Spring loaded handles with vinyl grips, all steel construction.
Inc.vat 15.85
Ex.vat 13.21
Code 340260
Inc.vat 39.90
Ex.vat 33.25
Inc.vat 8.15
Ex.vat 6.79
Code 910044
Riveters
Inc.vat 32.80
Ex.vat 27.33
Code 950268
Inc.vat 26.99
Ex.vat 22.49
Code 300290
Inc.vat 8.95
Ex.vat 7.46
Code 700141
Inc.vat 32.80
Ex.vat 27.33
Code 950269
174
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Thread Cutting
Axminster R15 Air Riveter Kit
A production rivet gun kit with four different rivet heads for blind rivets 3mm, 4mm and 5mm. The rivet is easily set with a pull on the trigger and without the risk of damaged knuckles. On the rear of the gun is a receiver which catches rivet shanks and stores them ready for later disposal. Supplied in a kit box with an impressive collection of rivets, jaws, noses, spare parts and tools. This gun will work on virtually any compressor with a reservoir tank. 1/4 BSP female fitting.
Inc.vat 65.50
Ex.vat 54.58
Code 800435
Inc.vat 39.76
Ex.vat 33.13
Code 953426
Pop Rivets
3, 4 and 5mm head diameter alloy Pop Rivets for maximum grip. Material lengths are 3mm(short), 6mm(medium) and 9mm(long). Supplied in boxes of 100 or 50.
Rivets (Boxed in 100 or 50) 3mm Alloy Short (100) 3mm Alloy Medium (100) 3mm Alloy Long (100) 4mm Alloy Short (100) 4mm Alloy Medium (100) 4mm Alloy Long (50) 5mm Alloy Short (50) 5mm Alloy Medium (50) 5mm Alloy Long (50) Inc.vat 1.70 1.79 1.91 1.99 2.20 1.62 1.79 1.86 1.99 Ex.vat 1.42 1.49 1.59 1.66 1.83 1.35 1.49 1.55 1.66 Code 900086 900085 900084 900089 900088 701468 701471 701470 701469
Thread Cutting
28 Piece Metric Tap & Die Set
A very useful 28 piece metric coarse tap and die set, economically priced and just the sort of thing to have tucked away in a drawer ready for those odd threading jobs which crop up from time to time. The set consists of first and second taps and dies in 3, 3.5, 4, 5, 6, 8, 10 and 12mm, two tap wrenches, a die holder and a thread gauge.
Inc.vat 50.50
Ex.vat 42.08
Code 953427
M2 x 0.4 Taper M2 x 0.4 Second M2 x 0.4 Plug M2.5 x 0.45 Taper M2.5 x 0.45 Second M2.5 x 0.45 Plug M3 x 0.5 Taper M3 x 0.5 Second M3 x 0.5 Plug M3.5 x 0.6 Taper M3.5 x 0.6 Second M3.5 x 0.6 Plug M4 x 0.7 Taper M4 x 0.7 Second M4 x 0.7 Plug M5 x 0.8 Taper M5 x 0.8 Second M5 x 0.8 Plug M6 x 1.0 Taper M6 x 1.0 Second M6 x 1.0 Plug M8 x 1.25 Taper M8 x 1.25 Second M8 x 1.25 Plug M10 x 1.5 Taper M10 x 1.5 Second M10 x 1.5 Plug M12 x 1.75 Taper M12 x 1.75 Second M12 x 1.75 Plug
Inc.vat 6.90 6.90 6.90 6.90 6.90 6.90 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 6.90 6.90 6.90 6.90 6.90 6.90 7.99 7.99 7.99
Ex.vat 5.75 5.75 5.75 5.75 5.75 5.75 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 5.75 5.75 5.75 5.75 5.75 5.75 6.66 6.66 6.66
Code 910027 910026 910025 910031 910029 910028 910040 910039 910038 910043 910042 910041 910047 910046 910045 910050 910049 910048 910057 910053 910052 910060 910059 910058 910015 910013 910011 910023 910020 910019
Inc.vat 25.99
Ex.vat 21.66
Code 300155
M2 x 0.4 Die x 13/16 OD M2.5 x 0.45 Die x 13/16 OD M3 x 0.5 Die x 13/16 OD M3.5 x 0.6 Die x 13/16 OD M4 x 0.7 Die x 13/16 OD M5 x 0.8 Die x 13/16 OD M6 x 1 Die x 13/16 O/D M8 x 1.25 Die x 1 OD M10 x 1.5 Die x 1 OD M12 x 1.75 Die x 1 OD
Inc.vat 11.50 11.50 9.20 9.20 9.20 9.20 9.20 11.50 11.50 13.80
Ex.vat 9.58 9.58 7.67 7.67 7.67 7.67 7.67 9.58 9.58 11.50
Code 410105 410106 410107 410108 400498 410109 701024 410111 410103 410104
Inc.vat 60.50
Ex.vat 50.42
Code 953428
Inc.vat 70.99
Ex.vat 59.16
Code 600659
Inc.vat 38.35
Ex.vat 31.96
Code 953425
Inc.vat 65.00
Ex.vat 54.17
Code 211979
175
Thread Cutting
Axminster Tap Wrench Aligner
If you have trouble getting your taps to start off square in the pilot hole then this device could be for you. The tap wrench, which will handle from 2.5mm to 6mm square, locates in a sleeve with a 40mm diameter base machined square to the bore to ensure perfect alignment. There is a triangular groove cut across the base for accurate tapping into circular bars or tubes. Two apertures in the side of the sleeve allow you to check the progress of the tap.
Parts Cleaning
Swarfega Oil & Grease Remover
A concentrated water rinsable formula to remove oil and grease from paths, drives, parts & components. Versatile, it can be applied manually or through floor scrubbers or pressure washers. Rinsable, it can easily be rinsed away with water leaving surfaces clean and free from grease. Degreases, it will quickly and thoroughly clean parts and components.
Tap Aligner
Inc.vat 18.40
Ex.vat 15.33
Code 200249
2 litres 5 litres
5
Tap Wrench 1.5-5mm Tap Wrench 5-8mm Tap Wrench 6-12mm
Cleaning Brush
Inc.vat 3.30
Ex.vat 2.75
Code 800414
Cleaning Tank
Inc.vat 93.50
Ex.vat 77.92
Code 800285
Threadlocker
The answer to nuts and bolts or setscrews that must stay tight. Clearly defined by its blue colour Threadlocker holds firm against vibration, is waterproof, heat and chemical resistant but can be dismantled with ordinary tools when necessary. Applied directly to the components before assembly, the locking compound develops a hold in 15 minutes and gains full strength in 3 hours.
Work Coat
Keep youself clean in the workshop. A really useful coat to wear for all sorts of jobs, with pockets where theyre needed and side access silts to get into your trouser pockets too. Machine washable at 50C. Available in classic navy, in a variety sizes. Please note that size small is available to order.
Threadlocker 6ml
Inc.vat 3.00
Ex.vat 2.50
Code 324345
Gauge
Inc.vat 3.30
Ex.vat 2.75
Code 900472
Size 9 (L)
Inc.vat 4.20
Ex.vat 3.50
Code 953642
Navy - Size Small Navy - Size Medium Navy - Size Large Navy - Size Extra Large Navy - Size XXLarge
176
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
125ml 500ml
Inc.vat 7.99
Ex.vat 6.66
Code 501445
400g
Inc.vat 7.99
Ex.vat 6.66
Code 952134
250ml tin
Inc.vat 13.66
Ex.vat 11.38
Code 701617
Inc.vat 14.70
Ex.vat 12.25
Code 952143
400ml
Inc.vat 15.60
Ex.vat 13.00
Code 952140
70 Wipes
Inc.vat 9.40
Ex.vat 7.83
Code 950515
Inc.vat 14.35
Ex.vat 11.96
Code 952135
Inc.vat 9.30
Ex.vat 7.75
Code 952144
450ml 1kg
Inc.vat 15.80
Ex.vat 13.17
Code 952137
Inc.vat 6.90
Ex.vat 5.75
Code 952146
177
Suction Pump
Inc.vat 8.90
Ex.vat 7.42
Code 810464
Inc.vat 7.99
Ex.vat 6.66
Code 952136
5 litre
Inc.vat 56.95
Ex.vat 47.46
Code 952139
Inc.vat 8.60
Ex.vat 7.17
Code 952138
Inc.vat 24.46
Ex.vat 20.38
Code 220047
500gm
Inc.vat 11.75
Ex.vat 9.79
Code 952141
Inc.vat 4.00
350ml
Inc.vat 14.90
Ex.vat 12.42
Code 952142
Inc.vat 4.96
Ex.vat 4.13
Code 952133
Grease Gun
Inc.vat 4.30
Ex.vat 3.58
Code 500241
178
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Precision Measuring
Micrometer
Inc.vat 61.00
Ex.vat 50.83
Code 600885
150mm(6)
Inc.vat 19.99
Ex.vat 16.66
Code 910359
Grease Gun
Inc.vat 9.20
Ex.vat 7.67
Code 220043
100mm
Inc.vat 12.20
Ex.vat 10.17
Code 519001
Grease Gun
Inc.vat 11.99
Ex.vat 9.99
Code 220041
Digital Caliper
Inc.vat 24.55
Ex.vat 20.46
Code 200398
Axminster High Precision Dial Caliper Axminster Heavy Duty Grease Gun with Flexible and Rigid Spout
Our top of the line grease gun designed for day-in and day-out heavy industrial applications. Complete with both 150mm (6) steel extension and a 300mm (12) flexible hose and professional 4 jaw coupler with ball check. These easy-to-read dial calipers are made from hardened stainless steel and have ground and lapped measuring faces. Maximum measuring length is 150mm and the dial is calibrated in divisions of 0.02mm. Adjustment is made with a knurled wheel with an override to prevent the mechanism from being strained. The dial can be zeroed and a locking screw is provided for pre-setting or transference of internal, external and depth measurements. Supplied in a strong foam lined presentation case.
Grease Gun
Inc.vat 15.60
Ex.vat 13.00
Code 220042
150mm
Inc.vat 26.30
Ex.vat 21.92
Code 910360
Gauge Attachment
Inc.vat 12.90
Ex.vat 10.75
Code 210951
179
Precision Measuring
GemRed Digital Dial Indicator
A 60mm diameter Digital Dial Indicator with many functions for the measurement of spindles, surfaces, cutters etc. With a 13mm travel and a large, easy to read display this dial gauge has a resolution of 0.001mm and an accuracy of 0.0008mm. As well as the number display there is a graphical display for up to 0.25mm of sensor movement. This is available from any position using the zero function. The ability to measure absolute, repetitive volume and reverse readings are by direct function buttons. Able to display in both metric and imperial without changing the reading position. With both 8mm and 9.5mm mounting stem this unit will fit most mounting stands available today. An engineers dream!
Inc.vat 30.55
Ex.vat 25.46
Code 100244
Inc.vat 43.50
Ex.vat 36.25
Code 210041
Dial Gauge
Inc.vat 17.90
Inc.vat 132.50
Ex.vat 110.42
Code 100249
Inc.vat 26.15
Ex.vat 21.79
Code 400208
Inc.vat 19.60
Ex.vat 16.33
Code 600886
Inc.vat 88.50
Ex.vat 73.75
Code 810462
Visual Aids
Magnifying Lamp
A self contained magnifying worklamp that has a heavy cast alloy base with a small worktable. You can position it wherever is convenient, the base having non marking rubber feet to prevent slippage. The lamp mounting stem is fully articulated so you can position the lens to the best advantage. The light source is a 22W daylight circular flourescent tube protected by a clip-on cover. A 125mm lens provides the magnification and has a good depth of field. A great work lamp for any hobby, craft or work that needs to be clearly illuminated.
Magnetic Base
Inc.vat 10.99
Ex.vat 9.16
Code 600401
Feeler Gauge
Inc.vat 4.25
Ex.vat 3.54
Code 950960
180
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Visual Aids
LED Worklight
This worklamp features a 3W LED bulb which gives a very even soft light. A 500mm flexible arm allows the lamp to be placed exactly where it is required. The small shade is not intrusive and features a degree of focusing to concentrate the light onto a small area. The whole structure is insulated and protected from exposure to water, coolants, lubricants and dusts. The 24V transformer is built into the base which has four 4mm mounting holes spaced at 50mm centres. This unit has an exceptionally long life coupled with extremely low energy requirements.
LED Worklight
Inc.vat 51.50
Ex.vat 42.92
Code 210329
Model Rating Power Blade Speed Max Capacity Round Max Capacity Rectangular Overall L x W x H Weight
CS-14 Trade 1,800W 3,300rpm 100mm 130 x 105mm 540 x 290 x 390mm 20kg
Fast cutting with no sparks, this cut off saw gives a cold cut using a tungsten carbide tipped (TCT) saw blade and is fitted with a powerful 1,650W motor, it will cut angle iron, pipe, tubing, conduit and channel sections giving a clean accurate cut that is virtually burr free. Fitted with a tool less adjustable guide plate 0 - 45 for quick and easy mitre cutting, the quick release vice adjusts quickly and holds work firmly. The large D handle ensure a positive grip whilst the lockoff switch prevents accidental starting. The maximum cutting depth is 115mm at 90 and 90mm at 45. Supplied with TCT blade and Safety goggles. Model Rating Power Blade Speed Max Capacity Round Max Capacity Rectangular Overall L x W x H Weight LC1230 Industrial 1,650W 1,300rpm 115mm 115mm 500 x 310 x 400mm 19.3kg
Great tool for metalworkers, plumbers, scaffolders and others who need to cut materials such as metal, plastic and aluminium to length. Creating minimal sparks this tool is compact with a total length of 343mm and low in weight. Being so easy to handle it can cut material in situ. With a cutting depth and width of 63.5mm, it has roller guides to ensure a precise cut plus an LED worklight for perfect visibility. The blade is tensioned with a quick release handle; the machine is held with a main handle and auxiliary handle giving excellent control. Lock off buttons prevent accidental turn-on. Supplied as body only, this machine is part of the Bosch 18V Li-Ion family of tools. Model Blade Length Weight Bosch GCB 18 V-LiN 730mm 3.8kg
Inc.vat 2.60
Ex.vat 2.17
Code 200043
Inc.vat GCB18VLiN Cordless Bandsaw Body Only 234.95 Bandsaw blade 730mm x 18tpi 31.70 Bandsaw Blade 730mm x 24tpi 31.70
181
Model Rating Power Blade Speed Blade Length Max Capacity Round Max Capacity Rectangular Overall L x W x H Weight saw unit on its base. The arm also has a latch to hold it in the downward position and a convenient carrying handle. This is a compact and well made machine with capacities adequate for most small engineering requirements and light enough to be carried about or stored under a bench. Replacement 1,470mm blades available.
MCB100A Light Trade 370W 45m/min 1,470mm 100mm 100 x 150mm 800 x 280 x 800mm 29kg
MCB100A Compact Bandsaw 240V Blade 10tpi Blade 14tpi Blade 24tpi Bi-Metal Blade 10-14tpi
All cast iron frame and bed Quick release vice swivels from -45 to +60 Hydraulic downfeed control with infinitely variable adjustment 3 speed belt drive to allow the machine to cope with a wide variety of materials Adjustable length stop Automatic downfeed stop All ball bearing blade guides Pull-out handle and wheels to allow easy movement around the workshop Max capacity at 90, 100 x 150mm rectangular, and 125mm diameter Ideal for the smaller fabrication jobs, especially those which require materials accurately cut at various angles
Inc.vat Swivel Head Metal Cutting Bandsaw 332.95 Bandsaw Blade 10tpi 10.36 Bandsaw Blade 14tpi 10.36 Bandsaw Blade 24tpi 10.36 Bi-Metal Blade 10-14tpi 26.80 Pack of 3 Blades (64.1/2) 27.95
Cuts up to 180mm diameter Choice of four motor speeds Quick release vice Built-in coolant system for maximum cutting efficiency Limit switch stops machine when cut is complete Adjustable hydraulic damper controls rate of lowering Ideal for schools, colleges and engineering workshops
Model Rating Power Blade Speed Blade Length Max Capacity Round Max Capacity Rectangular Overall L x W x H Weight
MB712 Trade 750W 12,15,21,33m/min 2,362mm(93) 180mm 180 x 300mm 1,244 x 432 x 1,613mm 125kg
MB712 Bandsaw 240V Bandsaw Blade 10tpi Bandsaw Blade 14tpi Bi-Metal Blade 14tpi Bi-Metal Blade 10tpi Bi-Metal Blade 10-14tpi
182
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Angle pivot
These are very versatile bandsaws, able to carry out a wide variety of tasks in any fabrication workshop. All major parts are manufactured from cast iron or heavy gauge steel, the machines having a robust construction and high durability. The whole motor, transmission and blade frame assembly pivots around a central pillar up to 60 for mitre cuts, the work remaining stationary in the vice. A large clamp lever holds the assembly securely at the selected angle. The vice features a very cleverly designed quick clamp system, ideal for repeat length work against the adjustable stop assembly. The bandsaws are amply powered by either 0.75kW or 1.1kW induction motors, transmision to the blade being by a worm gear system with a bronze worm wheel. The cutting action has a choice of methods, either hand, controlling the motor by a small trigger switch built into the handle on the blade frame, or by using the downfeed pressure control hydraulic cylinder. There is an auto stop switch for when the cut is completed. Other features include; a built in coolant system, a blade tension indicator, a conveniently located control station and a fabricated steel floor stand. Supplied with an M42 variable pitch blade and service tools.
Model Rating Power Blade Speed Blade Length Max Capacity Round Max Capacity Rectangular Overall L x W x H Weight
MCB260HD Trade 1.1kW (230V) 72m/min 2,460mm 220mm 260 x 110mm 1,550 x 620 x 1,135mm 225kg
Head swivelled to 60
MCB210HD Bandsaw 240V Bi-Metal Blade 10-14tpi Bandsaw Blade 10tpi Bandsaw Blade 14tpi Bi-Metal Blade 10tpi Bi-Metal Blade 14tpi MCB260HD Bandsaw 240V Bi-Metal Blade 10-14tpi
183
HVBS-812RK Bandsaw 240V Bandsaw Blade 10tpi Bandsaw Blade 14tpi Bi-Metal Blade 10tpi Bi-Metal Blade 14tpi Bi-Metal Blade 10-14tpi
Inc.vat Ex.vat 1,279.50 1,066.25 15.50 12.92 15.50 12.92 35.86 29.88 35.86 29.88 43.00 35.83
Robust bench top power hacksaw for metal cutting duties Uses standard 300 x 25 x 1.2mm hacksaw blades Cuts up to 130mm in diameter Angle cutting at up to 45 Repeat length stop is provided 250W induction motor with auto stop switch Model Rating Power Stroke Rate Overall L x W x H Weight SIEG G1 Trade 250W 170/min 820 x 380 x 755mm 68kg
SIEG G1 Powered Hacksaw 240V Replacement Blade 14tpi Replacement Blade 10tpi
Inc.vat 52.96
500gm
Inc.vat 11.75
Ex.vat 9.79
Code 952141
Safety Matting
Inc.vat 27.60
Ex.vat 23.00
Code 810194
5 litre
Inc.vat 56.95
Ex.vat 47.46
Code 952139
350ml
Inc.vat 14.90
Ex.vat 12.42
Code 952142
184
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95