You are on page 1of 29

SITE Layout Image and Tower Location Information

Note: this page should include pictures of site layout images, Tower Location or Tower pictures

Site Layout Image-Arial View

Tower Location Picture-Arial View

Site A Paste Picture here Paste Picture here

Tower picture if tower available

Paste Picture here

Paste Picture here

Expansion Site Survey Report


SITE ID SITE Address
Site Type Specify (If Any)

SITE Name

y Report

Existing Anten
Building Height(m) Tower Type Tower Height(m) Total Tower Height(m) N/A SS Tower 45 45

SITE Information

BTS Type 2116

Phase Info

Region South

Antennas & Tower Info Sector 1 Cell Configuration S000_333 Antenna 1 2 3 1 2 3 1 2 3 Antenna Band(900/1800/Dual) Dual band

Dual band

S000_333 2 S000_333 3

Dual band

Description

Existing Antenna Information

Antenna Height(m) 45

Antenna Azimuth 20

Sending mode(Combinig/ No combinig/ Wide band combining) Tilt(Mechanical) 0

45

160

45

220

Building Height(m) Tower Type Tower Height(m) Total Tower Height(m)

N/A SS Tower 45 45

SITE Information

BTS Type 3900

Phase Info

Antennas & Tower Info Tilt(Electrical) 8 Antenna Model(Type) Aurgus Sector 1 2 3 Proposd Cell Configuration S000_666 S000_666 S000_666

Aurgus

Aurgus

Description

Proposed Antenna Info

Region South

Space available on same height for New antenna (Y/N) Y Y Y

Case 1: Space available on same height: Provide descript

Case 2: Space not available on same height: Provide description that why the

Tower View and Leg information for new Antennas NOTE: Take separate and clear pictures for every cell on which expansion is required. Mention the leg summary for each leg on which new antenna is to be installed. Tower

Existing Antenna(s) View(Befor Note: Mention Existing Antennas inf new antenna is which new antenna

Sector_1 Leg

Sector_2 Leg

Sector_3 Leg

ting Antenna(s) View(Before Add antenna and change the mount) Existing Antenna(s) View(After add mo Mention Existing Antennas information like Elcetrical tilt/ Mechanical tilt for the cells in which Note: Mention Existing Antennas information li ntenna is which new antenna is to be added. E-tilt & M-tilt snaps should be attached for all in which new antenna is which new antenna the antennae separately be attached for all the a Sector_1 MT: Sector_1 MT:

Sector_1 ET:

Sector_1 ET:

Sector_2 MT:

Sector_2 MT:

Sector_2 ET:

Sector_2 ET:

Sector_3 MT:

Sector_3 MT:

Sector_3 ET:

Sector_3 ET:

tenna(s) View(After add mount and antenna) isting Antennas information like Elcetrical tilt/ Mechanical tilt for the cells ntenna is which new antenna is to be added. E-tilt & M-tilt snaps should be attached for all the antennae separately Sector_1 MT:

New Antenna(s) View(After add mount and antenna)

Sector_1 MT:

Sector_1 ET:

Sector_1 ET:

Sector_2 MT:

Sector_2 MT:

Sector_2 ET:

Sector_2 ET:

Sector_3 MT:

Sector_3 MT:

Sector_3 ET:

Sector_3 ET:

add mount and antenna)

0 degree

120 degree

Full view from tower

240 degree

Sector 1 view Mention how many degree here

60

Existing Antenna before Add antenna and change the mount

Sector 1 view Mention how many degree here

40

Existing Antenna after Add antenna and change the mount

mount

Sector 1 view Mention how many degree here

40

New Antenna After Add antenna and change the mount

30 degree

60 degree

150 degree

180 degree

270 degree

300 degree

Sector 2 view Mention how many degree here

180

Sector 3 view Mention how many degree here

Sector 2 view Mention how many degree here

165

Sector 3 view Mention how many degree here

Sector 2 view Mention how many degree here

165

Sector 3 view Mention how many degree here

degree

90 degree

0 degree

210 degree

0 degree

330 degree

or 3 view ny degree here

300

or 3 view ny degree here

295

or 3 view ny degree here

295

You might also like