Professional Documents
Culture Documents
Contents
Partner of our customers
page
3
Pod drives
10
Chains
12
14
Ropes
16
18
Twist locks
20
21
22
24
We would like to thank ABB Oy, Rolls Royce Marine, Renk AG, Fred. Olsen Energy ASA, Kirow Leipzig KE Kranbau Eberswalde AG, Gottwald Port Technology GmbH and I.P. Huse AS for their kind support in the form of pictures.
Klber Lubrication is a lubricant specialist supplying all sectors of industry worldwide. The name Klber stands for excellence in product quality, innovation and excellent service. A global network of production and sales companies ensures that our customers can reach us wherever they need us. Whether facing extreme corrosion, high loads, rapid biodegradability, low environmental impact or long maintenance intervals specialty lubricants from Klber meet the demanding requirements of maritime applications. They have been specifically developed for individual applications and are designed to increase reliability, economy and service life of components on ships and in the offshore sector, resulting in lower operating costs. Our comprehensive range of products is comprised of oils, greases, pastes and bonded coatings. In addition, we offer our customers comprehensive service and the knowledge and expertise of more than 75 years of research,
On-site support by highly qualified specialists Individual consulting and lubricant selection Chemical analyses and tests in our in-house test bay Cost/benefit calculation Worldwide availability of lubricants with consistent quality Development of new products with additional benefits Lubrication-related training on-site or in our training center
Today, and well into the future, our customers can be fully confident that we deliver what we promise. Welcome to Klber!
Another key benefit of synthetic oils is the reduction of service intervals. Because lower friction coefficients attained with the synthetic gear oils lead to less friction heat, reducing in turn the thermal stress acting on the lubricant film and the teeth is reduced as well. At the same time, synthetic gear oils have a higher thermal stability; oil aging progresses at a slower pace than with mineral oils. Consequently, oil change intervals can be extended several-fold. This means less impact on the environment and a reduction of operating costs throughout the gears service life. For gears that have to be tightened against sea water (e.g. those of rudder propellers, bow thrusters, special gears in dredgers), the ability of polyglycol oils to absorb water without affecting the load-carrying capacity of the tooth flanks and the bearing life may be of advantage. For the many demanding applications found in gears in the maritime sector, Klber offers a range of oils that meets even the most stringent requirements.
Product
Composition
/ / / / / / /
Synthetic high-performance gear oils for extremely low and elevated temperatures and loads ISO VG 32 to 680 Easy changeover because the product is miscible with mineral oil High micropitting resistance prevents premature fatigue failure Good wear protection prevents premature rolling bearing failure Compatibility tests with dynamic seals made of NBR and FKM confirm that there are no leakages caused by the oil Cost reduction due to longer oil change intervals
Klbersynth GH 6 series
/ / / /
Synthetic high-performance gear oils for high loads ISO VG 32 to 1000 Optimum friction behavior reduces power losses and improves efficiency The good wear protection of both the gears and the rolling bearing ensures that the service life determined for the lubricated components is achieved even with a water content of up to 2 % in the oil. Excellent viscositytemperature behavior contributes to the formation of a sufficient lubricant film even at elevated and high temperatures Compatibility tests with dynamic seals made of NBR and FKM confirm that there are no leakages caused by the oil Cost reduction due to very long oil change intervals
/ /
/ / / / / /
Rapidly biodegradable synthetic high-performance gear oils for normal and elevated loads ISO VG 220 and 320 Easy changeover because the product is miscible with mineral oil High micro-pitting resistance protects against premature fatigue failures Good wear protection prevents premature rolling bearing failure Compatibility tests with dynamic seals made of NBR and FKM confirm that there are no leakages caused by the oil Cost reduction due to longer oil change intervals Eco-friendly, biodegradability acc. to CEC-L-33-A-93 test is > 70% after 21 days
/ /
Product
Composition
Klberplex AG 11-462
Spreadable priming lubricant for large open drives, fills up roughness valleys with solid lubricant and protects against initial damages Also suitable as operational lubricant for small open gears White, graphite-free product ensures clean handling High load-carrying capacity and adhesion Efficient corrosion protection also during longer stop periods improves operational reliability
/ / / /
Klberfluid CF 3 ULTRA
/ / / / / /
Tried-and-tested, highly viscous adhesive lubricant with good wear and corrosion protection for a long component life Long durability of the lubricating film reduces operating costs Transparent, graphite-free product ensures clean handling Suitable for gear drives with immersion, circulation or spray lubrication Reduces lubricant costs by 2025% compared to adhesive lubricants containing graphite Reliable operation due to lower flank temperatures and complete separation of flanks
Klberfluid CF 3 M ULTRA
/ / / / / /
Tried-and-tested adhesive, highly viscous lubricant with good wear and corrosion protection of tooth flanks for a long component life Long-fibred texture ensures good relubrication effect Reliable operation due to lower flank temperatures and complete separation of flanks Long durability of the lubricating film and low relubrication quantities reduce operating costs Transparent, graphite-free product ensures clean handling Suitable for spray lubrication at ambient temperatures above 25C, otherwise manual application
For choosing the suitable lubricant for your application please see www.klueber.com / Applications / Marine
Pod drives
Ships maneuvering frequently without the assistance of tugs (e.g. offshore suppliers, Ro-Ro ferries) or those that are required to run with a minimum of vibration and noise (cruise ships) are more and more often fitted with pod drives. These pods are mounted to the stern section of the ship and contain the propeller as well as the electric drive motor with a short transmission shaft. Because the pods can be rotated by 360, the ship does not need a rudder and can be maneuvered by turning the pods. While the pod drives offer technical benefits, however a high degree of reliability is essential for their use. Of
particular importance in this context is the choice of the right lubricant for the propeller shaft bearing, thrust bearing, slewing bearing and the elastomer seals at both the turning shaft and the propeller shaft. The correct lubricant will extend component life and help to prevent premature failure, which can help minimize costly repairs as well as loss of revenue by the ship owner. Klber lubricants have been tried and tested in pod drives for several years, contributing decisively to the reliability of drive units in the offshore sector and on cruise ships.
Product
Application
Composition
Slewing bearings
/ / /
High wear protection prevents premature rolling bearing failures Light-colored, transparent product reduces need for cleaning and improves handling High viscosity and adhesion reduce the risk of leakage
/ / / /
Synthetic high-performance oils for very low and elevated temperatures and loads ISO VG 32 to 680 Good wear protection prevents premature rolling bearing failures Cost reduction due to longer oil change intervals
Klbersynth GH 6 series
/ / / /
Synthetic high-performance gear oil for high loads ISO VG 32 to 1000 Optimum friction behavior reduces power losses and improves efficiency The good wear protection prevents premature failure of rolling bearings even with a water content of up to 2% Cost reduction due to very long oil change intervals
STABURAGS NBU 30
Long component life due to good corrosion protection when exposed to humid or aggressive media High sealing effect due to good water resistance
Klberbio M 72-82
/ / /
High sealing effect due to good water resistance Water pollution category 1 Eco-friendly, biodegradability acc. to CEC-L-33-A-93 test is > 70% after 21 days
10
Product
Application
Composition
/ / /
Synthetic compressor oils for oil-injected process gas compressors Low drop in viscosity due to low gas solubility Especially suitable in contact with H2S Synthetic compressor oil for the cylinder lubrication of oil-injected reciprocating piston compressors
Cost reduction due to longer service life of valves and piston rings
Refrigeration compressors
Synthetic compressor oil for oil-injected process gas compressors operating with refrigerants based on hydrocarbon (propane, butane, propylene etc.) Compared to mineral oils very resistant to dilution and absorption by gases containing hydrocarbon cost reduction due to longer oil life
Refrigeration compressors
Synthetic compressor oil for oil-injected process gas compressors operating with ammonia Long oil life and reduced operating costs due to chemical stability
Application example: On shuttle tankers operating in the North Sea, operational reliability was increased significantly through the introduction of carefully selected compressor oils of the Klber Summit series. Klber Summit PGS 150 is used for the lubrication of the two VOC gas recovery compressors while the propane refrigeration compressor runs with Klber Summit R 200. The improved utilization rate of the tankers saves the operator approx. 100,000 in downtime per year.
11
Chains
Being vital machine elements, chains are particularly dependent on optimum lubrication. Klber offers special lubricants tailored to suit local conditions in terms of relubrication intervals, chain cleaning intervals, lubricant quantity and lubrication system. The Klber test rig facility operates a series of chain test rigs to support the development and selection of ideal lubricants. Lubricants help to maintain the value of machine elements, a fact which is especially important when expensive chains are concerned. Premature chain failure is usually due to inexpertly chosen lubricants and inadequate lubrication. Application example for chain lubricants balancing chains on oil rigs The drilling equipment operated on offshore oil rigs is exposed to constant sea level movements. Balancing chains are used to compensate for the upand-down movements, ensuring that they do not affect the drill bits below the sea floor a vital prerequisite for smooth and trouble-free drilling. High loads, micro-movements and extreme
conditions in combination with an unsuitable lubricant can lead to shorter maintenance intervals, extended downtimes, premature component failure and considerably shorter chain life. With specialty products from Klber, these chains will operate reliably and attain their maximum lifetime. Low lubricant consumption helps to reduce operating costs.
Initial lubrication: STRUCTOVIS BHD MF or GRAFLOSCON CA 901 ULTRA SPRAY Relubrication: STRUCTOVIS BHD 75 S Effect: Owing to the hydrocapillary effect, STRUCTOVIS spreads below the water and eliminates it from the lubricating gap. Application: by brush or automatic lubrication system.
12
Product
Composition
STRUCTOVIS BHD MF
/ /
Adhesive lubricant with good wear and corrosion protection for a longer chain life For open chains, also those exposed to water
/ / /
Extremely adhesive and resistant to high loads Easy application by aerosol reduces maintenance costs Environmentally sound propellant free of CFC
STRUCTOVIS BHD 75 S
Mineral oil
/ /
Adhesive lubricant with good wear and corrosion protection owing to hydrocapillary effect Especially for chains subject to water
Klberoil CA 1-460
Mineral oil
/ / /
Chain lubricant, especially for chains exposed to water and water vapor
Klberbio CA 2-460
/ / / /
Synthetic multi-purpose and chain oil Good wear protection and adhesion Water pollution category 1
13
Cranes can be found both on ships and in ports. Typical crane lubrication points include open gears in slewing rings, ropes, screws, bolts and pins. Rolling bearings are another important machine element. They meet high requirements in terms of function and service life. The lubricants purpose is to decrease friction and reduce or prevent wear. In maritime applications, water resistance is another key requirement to be met since in many cases the rolling bearing grease is in contact with water.
Water penetrating into the bearing has a negative impact on the greases lubricity and can cause corrosion in the bearing. Optimum sealing and an anticorrosion lubricant are critical in such cases. When selecting a lubricant, its sealing effect is an important criterion apart from lubricity. Be sure to doublecheck compatibility with all materials involved before application. Lubricating greases are considered resistant to water if their constituents (base oil, thickener, additives) neither react to nor dissolve in water. The thickener is critical for water resistance.
14
Product
Composition
/ / /
Long-term lubricating grease for rolling bearings, contains special wear additives for a longer service life Wide range of application due to a large service temperature range and optimum oil release High ageing resistance for long relubrication intervals and cost reduction
STABURAGS NBU 30 K
/ / /
Rolling and plain bearing grease with good wear protection and resistance to media Excellent protection against corrosion prevents bearing damage High load-carrying capacity and good protection against tribocorrosion
Klberbio M 72-82
Special lubricating grease for the lubrication of rolling and plain bearings, chains, joints, open gear drives, ropes, racks and girth gears Good adhesion and water resistance Water pollution category 1 Eco-friendly, biodegradability acc. to CEC-L-33-A-93 test is > 70% after 21 days
/ / /
15
Ropes
Ropes are elements often used in conveyors. They are made up of wires which are combined in strands which, in turn, are twisted into ropes. Depending on how they are used, a distinction is made between conveyor ropes (cranes, winches, elevators), stationary ropes (anchor ropes), carrying ropes and sling ropes. Ropes are subject to tensile load. Changes in rope direction result in pressure, torsion and bending loads on the wires. The lubricant has the following tasks: protecting against wear protecting against corrosion ensuring required friction moments (friction pulley ropes)
The lubricant can be applied by brush or special rope lubrication equipment. We recommend using NLGI 1 greases in automatic lubricating equipment. A rule of thumb for lubricant quantity is 1 2% of the rope weight.
16
Product
Composition
/ /
Priming lubricant with good adhesion, long durability of lubricating film High load-carrying capacity and wear protection for a long service life of ropes
/ /
Sprayable running-in lubricant smoothens surface roughnesses for a long service life of ropes Low lubricant consumption due to high adhesion
Klberplus SK 06-418
Lubricant dispersion for the external protection of wire ropes, high corrosion protection
/ / / / /
Synthetic multi-purpose oil Good wear protection for a long service life of ropes Low consumption due to good adhesion; reduces lubricant quantities and operating costs Water pollution category 1 Eco-friendly, biodegradability acc. to CEC-L-33-A-94 test is > 70% after 21 days
17
Lubricants for crown gear couplings have to meet very special requirements owing to the rotary movements performed by these couplings. An inadequate lubricant can become dry, its individual ingredients can separate, or the lubricant can simply disappear from the housing. Relubrication intervals may then be extremely short. Lubricating oils or greases are used in these applications, depending on the gear design. Oils have the advantage of ensuring a permanent lubricant film on the
tooth flanks because of their backflow behavior, and they facilitate heat dissipation. Lubricating greases generally permit peripheral speeds of up to 35 m/s. Lubricants made by Klber have been successfully used in crown gear couplings on ships for several years. The following Klber products have been approved by important manufacturers:
18
Product
Composition
Oils
STRUCTOVIS BHD MF Mineral oil, synthetic hydrocarbon oil, solid lubricant (MoS2 )
/ /
Adhesive lubricant with good wear and corrosion protection for a long component life High operational reliability due to solid lubricant providing emergency lubrication properties
Mineral oil
/ /
High-performance lubricating oil with good corrosion and wear protection for a long component life Long oil service life and reduced operating costs due to good ageing and oxidation stability
Greases
GRAFLOSCON C-SG 500 PLUS Mineral oil, Al complex soap, solid lubricant (Graphit)
/ / /
Adhesive lubricant with good corrosion and wear protection for a long component life Suitable for elevated operating temperatures The solid lubricant provides emergency lubricating properties and increases operational reliability
Klberplex GE 11-680
/ /
Adhesive lubricant with good corrosion and wear protection for a long component life High load-carrying capacity increases operational reliability
Klberlub BE 41-1501
Mineral oil with high base oil viscosity, special lithium soap, solid lubricants (MoS2 and graphite)
/ / /
Heavy-duty lubricating grease with good corrosion and wear protection for a long component life The solid lubricant provides emergency lubricating properties and increases operational reliability Good ageing and oxidation stability extends grease life and reduces operating costs
19
Twist locks
Twist locks are used on cargo ships to connect the individual containers during transport. They are exposed to salt water and both high and low temperatures. They consist of many individual components, all of which must be operational at all times. A lubricant used on twist locks must ensure reliable corrosion protection, and it must keep the components operational over a long period of time. In addition, relubrication must be easy and relubrication intervals should be long. Together with a twist lock manufacturer, Klber has developed the following solution:
First, use our CONTRAKOR A 100 anticorrosion product on the individual twist lock components, then initially lubricate them with Klberplex BE 11-462 before assembling the parts. Use the spray version of Klberplex BE 11-462 for easy relubrication. With this combination of lubricants, relubrication intervals were doubled from 6 to 12 months.
Product
Composition
CONTRAKOR A 100
Mineral oil
/ / / /
Long-term corrosion protection of bright surfaces Solvent-free concentrate Can be diluted with solvent Flexible application by immersion, spraying or brush
Klberplex BE 11-462
/ / / /
Rolling and plain bearing grease with good wear protection and high load-carrying capacity for a long service life of twistlocks Adhesive, water resistant and good corrosion protection Long relubrication intervals reduce costs Also available as spray for easy relubrication
20
When storing or transporting iron and steel components in a maritime environment, corrosion protection products are essential in order to prevent corrosion-related damage. A suitable anticorrosion agent protects sheet metal components, pipes, sectional steel, machines and equipment against external impact during sea transport. We offer anticorrosion concentrates, wax-based anticorrosion products and oil-soluble anticorrosion lacquers.
Product
Composition
CONTRAKOR A 100
Mineral oil
/ / / / /
Long-term corrosion protection of bright surfaces during transport by sea or storage Solvent-free concentrate Can be diluted with solvent
Klbertop KB 118
/ / /
21
Application example: Fasteners and screwed joints on exhaust gas lines and turbochargers in Diesel engines that were lubricated with Klberpaste HEL 46-450 prior to assembly can be undone easily and without damage even after elongated exposure to high temperatures. This helps to avoid time-consuming and costly repairs.
22
Product
Composition
Klberpaste 46 MR 401
/ / / / / / /
White, high-performance lubricating paste for positive and power-locking connections, e.g. propeller blade screws Facilitates assembly and disassembly Protects against running-in damage and prevents fretting Good protection against wear even under high surface pressure due to high pressure absorption capacity Improves lubrication when used on friction points subject to oscillations and vibrations protects against tribocorrosion Resistant to aggressive media, is not washed out, long-term lubrication Good corrosion protection extends component life
/ / / / /
Screw paste for normal and high-alloy steels Facilitates assembly and disassembly Good solubility and non-destructive component disassembly when exposed to high temperatures up to 1000 C for a long time Suitable for connecting elements in exhaust gas turbochargers Extended component life due to good corrosion protection and resistance to aggressive media
ALTEMP Q NB 50
/ / /
Suitable for assembly purposes, press fits and bearing seats as well as screw-bolt connections Good resistance to media and high pressure absorption capacity Prevents stick-slip, tribocorrosion and fretting corrosion
23
24
Product
Application
Composition
/ / / / /
Eco-friendly multi-purpose oil Good wear protection and adhesion Cost reduction due to low consumption Water pollution category 1 Eco-friendly, biodegradability acc. to CEC-L-33-A-93 test is > 70% after 21 days
Klberbio M 72-82
/ / / / /
Eco-friendly lubricating and sealing grease Good adhesion and water resistance; good sealing effect Long service life and reliable function of shaft seals due to the products compatibility with elastomer Water pollution category 1 Eco-friendly, biodegradability acc. to CEC-L-33-A-93 test is > 70% after 21 days
Closed gears
/ / / / / /
Rapid biodegradability helps to protect the environment in the event of leakages or damages High-performance gear oil for normal and elevated loads High micro-pitting resistance protects against premature fatigue failures Good wear protection prevents premature rolling bearing failures Cost reduction due to extended oil change intervals Eco-friendly, biodegradability acc. to CEC-L-33-A-93 test is > 70% after 21 days
25
www.klueber.com
With more than 2000 products available around the world, you can be sure that Klber has the right product for your application. Please contact Klber Lubrication specialists worldwide to assist you in all matters regarding lubrication.
Special lubricants
Lubricating Lubricating Lubricating Lubricating oils greases waxes pastes Bonded coatings Release agents Anticorrosive agents Cleaning agents
Tribo-system materials
Would you like more detailed on our product range? Do you need Material Safety on any of the above products? You can order via our website
information
Data Sheets
www.klueber.com
Publisher and design: Klber Lubrication Mnchen KG Copyright: Klber Lubrication Mnchen KG Reprints, total or in part, are permitted if source is indicated and voucher copy is forwarded. 9.47 e Edition 08.06 The data in this technical brochure is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing. Klber products are continually improved. Therefore, Klber Lubrication reserves the right to change all the technical data in this technical brochure at any time without notice.
27