Professional Documents
Culture Documents
[]
[]
001-001
Version History
Version
1.0 1.1
Date
2007/08/20 2007/08/24
Modified
Calvin Lin Calvin Lin First Release
Note
1. Add Remote Controller map 2. Replace physical panel photo 3. Add Time Server description
1.2
2007/08/30
Calvin Lin
1. Based on version 1021.1002.1120.4003 2. Switch VOL +/- & Mute to keyforall 3. Auto update Method changed 4. Add software recover section
1.3
2007/09/14
Calvin Lin
1. Based on version 1021.1002.1120.4005 2. Change tv.js array 3. Add TV error code 4. Add upgrade flow table 5. Fix some typo
1.4
2007/10/09
Calvin Lin
1. Based on version 1021.1002.1120.4006 2. Add upgrade error code 3. Change TV channel array
1.5
2007/11/01
Calvin Lin
1. Based on version 1021.1002.1120.4007 2. Add VLC version recommends 3. Change OSD menu to key for all 4. Modify VOD channel setup file to vod.js
1.6
2007/11/13
Calvin Lin
1. Based on version 1021.1002.1120.4011 2. Add input mode 3. Add specify ipv6 multicast source at tv.js
1.7
2007/11/27
Calvin Lin
1. Based on version 1021.1002.1120.4012 2. Modify LED status table 3. Add Booting part at EPG 4. Add standby screen 5. Add new OSD function 6. Add lots of epg description 7. Add Manual Recover
2.0
2007/12/18 Oliver Chang 1. Based on version 4020 2. Add EPG page 3. Add PPPoE setting 4. Add throbber setting 5. Add httptv support 6. Change TV channel array 7. Add reset factory default setting
8. Change IME key of @ 2.1 2008/01/08 Calvin Lin 1. Based on version 4025 2. Add httptv advanced support (playback for file, IPv6, FQDN) 3. Modify TV channel table 4. Add remote key repeat support 5. Add USB keyboard support 6. Add Video function page 7. Add throbber and remote repeat setup 8. Modify outside TV channel setting 9. Add Video Error Code 3.0 2008/01/23 Calvin Lin 1. Based on version 4030
Oliver Chang 2. Add different remote controller for English and some additional key 3. Add Normal RTSP VOD Server support 4. Add local video info file description 5. Add all new music pages for play mp3 file from usb device 6. Update outside vod page format 7. Add Manual recovery procedure 3.1 2008/02/18 Calvin Lin 1. Based on version 4031 2. Adjust the name and description of key at different remote control that has same function equal 3. Add diagnostic page 4. Add more detail explanation about setup page 5. Modify manual upgrade page with states bar 6. Add and correct Error Code table 3.1.1 2008/03/07 Calvin Lin 1. Based on version 4032 2. Add Darwin VOD server normal play support at normal RTSP VOD 3. Add Anevia VOD server normal and track play support at normal RTSP VOD 3.2 2008/04/01 Oliver Chang 1. Add Appendix D (SSH) 2. Add Appendix E (Remote Management) 3.2.1 3.3 2008/05/08 Oliver Chang 1. 2008/08/01 Calvin Lin Add Remote access setting in setup page
1. Based on version 4035 2. Add software keyboard input method 3. Modify index page about checking progress 4. Switch some picture for suit new GUI 5. Add deinterlace setting at setup OSD 6. TV epg retry every 1 sec at some fail type
7. Move EPG epg under TV epg 8. Add live555 media server trick play support 9. Update Status EPG page layout 10. Switch Setup EPG image to that with soft keyboard 11. Add low display region support for dialog-box, Setup EPG, Error Pageetc 12. Add Error Page description 3.4 2008/09/17 Calvin Lin 1. Based on version 4036 2. Modify VOD menu page 3.5 2008/11/04 Oliver Chang 1. Base on version 4037 Calvin Lin 2. Update some new GUI 3. Modify VOD outside page setting 3.6 2008/12/31 Calvin Lin 1. Base on version 4038 2. Update VLC version 3. Update TV channel 4. Update software keyboard 5. Update new TV function includes subtitle support 6. Update Setup page & same setup page with different display region 7. Update outside TV page 3.7 2009/7/23 Calvin Lin 1. Based on version 4039 2. Update booting EPG diagram 3. New OSD setup items 4. Update Key For All icon 5. Remove TV EPG page 6. Add PVR support at TV 7. Replace Video page to PVR 8. Update Status page 9. Update Diagnostic page 10. Update Upgrade page 11. Remove error code table, please refer to JavaScript APIs 3.8 2009/8/13 Calvin Lin 1. Add VC1 support 2. Add Video Page 4.0 2010/2/5 Calvin Lin 1. Update Overview feature 2. Update VLC instruction to v1.x 3. Add Download page 4. Update Photo page description 5. Add Himi WEB page 6. Add system info and change password at Setup page 7. Add HImi outside page XML description
5.0
2010/12/06
Calvin Lin
1. New document format 2. Split physical interface to Quick Guide 3. Add HomePNA check at booting flow table 4. Add Contrast, Hue, Brightness and 1080P24 HD output setting at keyforall. 5. Modify TV schedule recode warning window. 6. Remove Others tab from VOD page. 7. Add more media format that supported, update color key definition, update save location of setup at PVR/Video page 8. Update Download Destination of setup at Download page 9. Add HomePNA , hint bar and available key at status page 10. Modify Setup page format and IPv6 Source List Setting, Remove confirm step, modify change password to advanced setting, add advanced way to set time zone. 11. Modify Auto Upgrade procedure and add one more page: upgrade_no_confirm.html 12. Update software upgrade diagram 13. Update TS Reader web url 14. Modify lots of descriptions, update some diagram and correct some typo
5.1
2011/08/18
Calvin Lin
1. Combine HD/SD Output to Output Format at Setup OSD 2. Add HDMI Mode at Setup OSD 3. Add Music Page 4. Add Enable Watch Dog setting at Setup page 5. Modify DRM setting description 6. Add Time Zone Advanced Setting appendix 7. Move SSH & Remote Management appendix to another document Set-Top Box Customization Guide
5.2
2011/10/21
Morigan Wang
1. Update the date of Time Zone. 2. Fix some typos of Time Zone.
Index Table
I. II. Overview ........................................................................................................................1 Features ..................................................................................................................1 Minimum Configuration ..............................................................................................2 System Diagram.....................................................................................................2 Required Server Software.....................................................................................2 Channel Table ........................................................................................................3 Step by Step ............................................................................................................3 III. Input Interface ..............................................................................................................9 Remote Controller Key Map ................................................................................9 Remote Controller Input Mode..........................................................................13 Remote Controller Repeat Mode .......................................................................14 Software Keyboard..............................................................................................14 USB Keyboard .....................................................................................................15 IV. EPG Page ....................................................................................................................16 Booting..................................................................................................................16 Demo Page ............................................................................................................18 Kumat ...................................................................................................................19 Key for All ......................................................................................................19 Menu ...............................................................................................................21 TV....................................................................................................................22 VOD ................................................................................................................27 PVR/ Video .....................................................................................................30 Download........................................................................................................37 Photo ...............................................................................................................40 Music...............................................................................................................41 Status...............................................................................................................44 Diagnostic .......................................................................................................46 Himi.......................................................................................................................49 Home ...............................................................................................................49 Key for All ......................................................................................................50 IPTV................................................................................................................50 VOD ................................................................................................................51 VIDEO ............................................................................................................53 PHOTO...........................................................................................................54 MUSIC............................................................................................................56 SETUP ............................................................................................................57 Error Page ............................................................................................................57 V. Setup Page...................................................................................................................58 IPv4 Network Setting ..........................................................................................59
Config Setting.......................................................................................................60 IPv6 Network Setting ..........................................................................................61 IPv6 Source List Setting......................................................................................63 DRM Engine Setting............................................................................................65 Display Setting .....................................................................................................66 Access setting........................................................................................................67 Finish and Reboot................................................................................................68 Advanced Setting .................................................................................................68 VI. Connect Outside Page.................................................................................................70 Structure HTTP Server .......................................................................................70 Modify Kumat TV Channel Table......................................................................70 UDP Multicast Channel.................................................................................70 UDP Unicast Channel....................................................................................71 HTTP Multicast / File Channel ....................................................................71 Modify Kumat VOD Table..................................................................................72 Modify Himi Channel XML File ........................................................................73 IPTV Channel ................................................................................................73 VOD Program ................................................................................................74 VII. Upgrade Software .......................................................................................................76 Utilities..................................................................................................................76 Auto Upgrade.......................................................................................................76 Manual Upgrade ..................................................................................................78 Auto Recover........................................................................................................80 Manual Recover...................................................................................................81 Software Upgrade Flow.......................................................................................83 VIII. Appendix A. TS Reader...............................................................................................84 IX. Appendix B. Manual Recover Procedure ..................................................................86 X. Appendix C. Time Zone Advanced Setting ................................................................89 Instruction ............................................................................................................89 Time Zone Abbreviations....................................................................................89 Time Zone String Format ...................................................................................89 Samples .................................................................................................................90 Reference ..............................................................................................................92
I. Overview
With an Ethernet input and flexible video/audio output, the STB introduces high performance solution by advanced video decoder H.264/AVC engines. This provides our customers, ISPs or Telecoms, a cost effective way to deliver sophisticated interactive digital television service including multicast streaming, video on demand, personal video recode, internet access, etc.
Features
HD (High Definition) HD+SD PIP HD/SD MPEG2 Main Profile at High Levels HD/SD H.264/AVC main and high profile to level 4.1(HD), level 3.1(SD) SD MPEG-4 P2 SP/ASP, DivX 3.11/4.1/5.x VC-1 advanced profile @ level 3 (Option) VC-1 simple and main profile (Option) Audio decode: AAC LC, AAC LC+SBR Level 2, AAC+ Level 2, AAC+ Level 4 Audio decode: MPEG1 Layer 1, 2 Audio decode: Windows Media and Windows Media Pro Audio ( WMA) (Option) HDMI 1.3/DVI 1.0 with HDCP 1.2 Supports different Middleware and Conditional Access vendors Audio outputs: - Stereo Audio - Digital Audio surround via S/P-DIF (coaxial and optical) direct pass-through from media content Video outputs - SD: Composite, S-Video HD: Component/D4, HDMI/HDCP - SD: PAL, NTSC and SECAM HD: 1080p30, 1080p24, 1080i(60/50), 720p(60/50) - Full screen ,4:3 and 16:9 format - Independent simultaneous dual output HD/SD IR remote controller 10/100 BaseT Ethernet with IPv6 support UDP, RTP and HTTP multicast streaming Video on demand by RTSP/HTTP or download play Personal Video Record Conditional Access smartcard-less - OTP for storage of secure information and special customer configurations. Macrovision 7.1 (Option) Embedded browser HPNA 3.1 ( Copper-Gate CG3210 )
System Diagram
HDMI Ethernet Composite Component S-Video
TV
Amplifier
DHCP Server is structured for provide IP address to STB, it can instead of set static IP by setup page (Refer Chapter III). VLC media player can get from this link http://www.videolan.org/ and it acts as UDP and HTTP multicast server or UDP unicast server. There are some important points of using VLC: 1. 2. Run many VLC at un-powerful PC may cause performance issue and Windows OS is serious than Linux. VLC version 0.8.6b, 0.8.6c & 0.8.6d has problem when multicast 2 channels above at the same time, no matter Linux or Windows. Version 0.9.8a or
HTTP Server is use for service Channel 101, 102 and 103. The STB get media file from specified address and play at real time. LIVE555 media server can get form http://www.live555.com/mediaServer/. It is a simple RTSP server application. At our configuration, it plays as RTSP VOD Server. Time Server is required for display local time, please refer chapter V to configure time server and time zone. On the other hand, time server also be required for some DRM server (Like Verimatrix DRM Server).
Channel Table
The default TV channel table of STB kumat page is as below. It is pre-storage at the STB and read-only. Send multicast or unicast to the destination that exists below is the easiest way to start. If want change to different channels, please refer Chapter VI to structure outside web page.
Protocol UDP UDP UDP HTTP HTTP HTTP HTTP HTTP HTTP HTTP HTTP HTTP UDP 224.6.6.70 ff3e::10
Address
Port 1234 1234 1234 1234 2345 1234 2345 1234 2345
224.6.6.71 (DRM enabled) 10.10.10.1 10.10.10.1 fec0::1 fec0::1 stream.ipstb.orion stream.ipstb.orion 10.10.10.1/stream/test.ts [fec0::1]/stream/test.mpg streamer.ipstb.orion/stream/test.tp Device IPv4 Address
1234
Step by Step
VLC Media Server 1. Install and setup DHCP server 2. Install VLC Media Player 3. After install, execute VLC by click desktop icon. Select Media, Streaming
4. Click Add, select media path and file that you want to multicast, then click Stream.
9. It can switch different repeat mode when playing. Click Show Playlist button to open playlist window.
Click Repeat control button to switch repeat mode. It has three kinds of repeat mode that you can select: No Repeat, Repeat One or Repeat All.
By our experience, the performance of VLC multicast at Windows OS may decrease each time after repeat. This situation is much better at Linux OS. There is some jitter at STB output when repeat, that is caused by VLC. It is normal. 10. Now can connect Ethernet, output interface cable and power on the STB. After loading procedure, you can watch TV like below screen. The background of menu page is multicast stream from 224.6.6.70:1234.
11. Execute another VLC by click desktop icon and repeat above steps to set another VLC is not allow input FQDN as address, therefore it still need input IP address when set Channel 15 & 16. It can use packet analyzer utility like Wireshark (http://www.wireshark.org) to capture packet for verify multicast stream is fine. Appendix A provide one tool named TS Reader, the lite version is free and its useful for verify multicast stream is OK. HTTP Server Put media file test.mpg, test.ts and test.tp to correct URL that channel 101-103 defined at HTTP server. If at Linux OS, please pay attention about access right. LIVE555 Media Server 1. The Live555 server is a console application (there is currently no GUI version). To run the server, simply type "live555MediaServer". 2. Put media file that for VOD at the same directory 3. Play streams from VOD client using the URL rtsp://<Server IP Address>/<Filename> 4. Please do not put blank at filename.
III.
Input Interface
10
-VOL
Volume Down
CH+ Japanese Version CH OK BACK NEXT F.R. PLAY/PAUSE F.F. STOP HELP EPG VOD STEREO SETUP / / RED/GREEN YELLOW/BLUE
Channel Up
Channel Down Nav. Up Nav. Down Nav. Left Nav. Right Enter/Select Previous Page Next Page Fast Rewind Play/Pause Video Fast Forward Stop Video Help Information Jump to EPG Page Jump to VOD Page Stereo/Left/Right OSD Menu Toggle
Optional function
11
Pattern
Common Function Standby Toggle Mute Toggle Optional function Number 1 Number 2 Number 3 Number 4 Number 5 Number 6 Number 7 Number 8 Number 9 Number 0 OSD Menu Toggle Backspace / Delete Input Value
12
CH+ CHVOL+ VOLVOD EPG HELP HOME RELOAD OK BACK NEXT F.R. PLAY/PAUSE F.F. STOP
Channel Up Channel Down Volume Up Volume Down Jump to VOD Page Jump to EPG page Help Information Return to Portal Page Reload Page Nav. Up Nav. Down Nav. Left Nav. Right Enter/Select Previous Page Next Page Fast Rewind Play/Pause Video Fast Forward Stop Video
13
Remote controller switch different input mode automatically by different WEB page configuration. Key Mode Digital
1 1 1 : a b c d e f 1 . @
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
0 0
V6 Address
2 A B C
3 D E F
4 G H I
5 J K L
6 M N O
7 P Q R S
8 T U V
9 W X Y Z
Capital Letter
: / [ ] , 1 . @
0 Space _ ? ! ~ 0 Space _ ? ! ~
2 a b c
3 d e f
4 g h i
5 j k l
6 m n o
7 p q r s
8 t u v
9 w x y z
Litter Letter
: / [ ] ,
7 8
9 0
Japanese Hiragana
14
Japanese Katakana
And Clear key is backspace for all modes. Below uses string stb for example to show how input method working, the step of key press is: 7 - Down Down Down Down Enter 8 Down Enter 2 Down Down Enter If the next word been defined at different key, the Enter can be skipping, the step become: 7 - Down Down Down Down 8 Down 2 Down Down Enter Press number key repeatedly also can switch different word that defined at the same key, therefore the step become: 7 7 7 7 7 8 8 2 2 2 Enter
Software Keyboard
Move focus to input text or password item and press OK can open software keyboard for input value.
15
With a well-defined div id, the soft keyboard can auto switch by 3 modes: all character, The top area of software keyboard is input value; it shows value that currently inputting. If the input target is password, the character presents by *
Move focus to control character can execute special command. Esc Hide software keyboard and abort any modification of input value Clear (Backspace) Clear last input character, the same behavior as CLEAR key at Remote controller. Flush Clear whole input value Shift Only works when mode is all character, switch between capital and lower letter Enter Accept input value and hide software keyboard.
USB Keyboard
Connect USB keyboard to USB Host and it can use keyboard for input value, it is very useful for input setup value when deploying to end user. The input mode by key 0-9 is also work at keyboard for input Japanese.
16
Booting
Below is the first page when boot STB up, welcome to HDTV experience with the STB.
There will be a throbber picture showing (Refer display setting for detail) in between welcome and the next page if throbber is set to enabled. After welcome page, the STB starts some checking and try to load Home Page, the Home page maybe the portal page (If upgrade page setting is empty) or the upgrade page. The screen shows Loading when checking.
There are three different places for store home page: http server, file at flash and file at USB storage. Below flow table shows how checking works:
17
For example, if you forgot connect Ethernet cable, the STB doesnt support HomePNA and the home page location is at HTTP server. The screen reminds below message and
18
There is no such of message if the home page location is file (flash or USB). When connect is retrying, the screen shows home page URL for debug. Please check environment states and confirm every setting is fine. If it is caused by wrong portal address, please follow next chapter Setup Page to correct.
If the retry limitation is exceeded, the STB stop retries and stays with error message. Please reboot STB after issue solved for restart booting procedure. It can use DHCP server to replace this mechanism, please refer Set-Top Box Deploy Guide document about how to.
Demo Page
There are two kinds of demo page that already build-in STB, we named them as Kumat & Himi. The main different between them is Kumat focused on wide, it
19
Kumat
Key for All There are some keys of remote controller are work for whole kumat pages: POWER The STB can support 3 different types of power mode. You can try on by pressing the button to make sure which type you are using. Type 1: Press to stand-by and will be wake up by one more press. Type 2: Type 3: Press to reboot. Press to stand-by and will reboot by one more press.
10+ or SETUP Show OSD menu for change Saturation, Contrast, Hue, Brightness, HD output format, SD output format, Aspect Ratio, Deinterlace, SPDIF Mode & Advanced. Saturation: Adjust color saturation of video from 0 to 100. Contrast: Hue: Brightness: Output Format: Adjust color contrast of video from 0 to 100. Adjust color hue of video from 0 to 100. Adjust color brightness of video from 0 to 100. Switch different HD/SD output format. The optional values are 1080P30, 1080P24, 720P, 720P50, 1080I, 1080I50, 480P, 576P, 480I and 576I. It actives at HDMI & component (or D4) interface. The SD output format switch between NTSC (480i) & PAL (576i) automatically. It actives at composite and S-Video interface. Aspect Ratio: Full Screen, 16:9 & 4:3. The aspect setting is to set the device (such as TV) format that receive stream from the STB, NOT to set the STB output stream itself. The STB adjust the output aspect ratio automatically by receive the setting from device (like TV for example).
20
The process of converting interlaced video, like common analog television signals, into a non-interlaced form; it can set to enable or disable. Switch different output mode. Auto, PCM or Pass-through. Switch different output mode. PCM or Pass-through. Provide the direct link to status or diagnostic page.
Use UP and DOWN at remote controller to switch setting item, LEFT and RIGHT to select value. Press OK to accept setting. If set output format, there is one dialog window pop-up and waiting for confirm. Press Yes to keep new output format, No to revert to last setting. If the TV doesnt support new output format, DO NOT press any key. The STB will revert to last setting automatically after 10 sec.
21
VOL +/- Increase / Decrease volume from 0 ~ 100. If muted already, un-mute automatically.
A/R (English Version Remote Only) Quick key for change aspect ratio.
PAGE UP / PAGE DOWN (English Version Remote Controller Only) Scroll browser page. VOD Jump to VOD page. Menu This is portal page of Kumat, the background is multicast stream from 224.6.6.70 and
22
port is 1234. When press HOME key at remote, it jump to this page. Please use cursor
TV This is the live TV page. There are three modes at this page: Live Play, Time Shifting & Recording. (The Time Shifting and Recording is not implemented for all model.) Live play The right-top corner shows channel number at start or channel switched. One hint border at bottom for defines the function of color keys.
If the channel that be switched is not servicing, it shows error message at screen. When error type is Connect Fail, Bad Mode or End of Stream, the STB repeats connect procedure every 3 secs and the channel number at right-top corner keep blinking until stream received.
23
Available Key: 0-9 Select channel by digital, the range is 000-999. It only works at the channel that already define at channel table (Refer Chapter II Channel Table).It can auto complete when only input one or two digital. For example, press 7, the channel number shows CH 7 and switch to channel 7 after waiting timeout. CH+/- Switch channel, press down and hold can switch at quick mode. EPG Display simple EPG (Electronic Program Guide) includes channel number and channel name. Use UP and DOWN at remote controller to select channel. Press OK to jump to channel selected.
HELP Show channel information includes channel number, channel name, multicast IP, port number, video and audio codec type, FPS (Frame Rate per Sec) & A/R (Aspect Ratio). The A/R here means video stream A/R, not STBs setting.
24
DISPLAY (English Version Remote Only) Toggle to channel number display. SWAP (English Version Remote Only) Swap between current channel and previous channel. STOP Stop live TV and return to portal page. PLAY/PAUSE Enter time shift mode and the live stream be paused. GREEN Toggle hint bar. YELLOW Subtitle toggle.
BLUE Display record setting dialog. Time Shift Press PLAY/PAUSE at Live Play mode can enter Time Shift mode and the live stream be paused. There is one icon displays current state at right-bottom corner. The STB starts to recode live stream at background in the main time.
25
F.F & F.R Control trick play at Time Shift. Forward and rewind both have 5 segments from 2x ~ 32x. Press again at trick playing makes speed double.
HELP Show time bar. The right-top corner displays current playing location / time shift recording length, and present by yellow bar (current playing location) & blue bar (time shift recording length). Press again, the channel information shown; again hide info. It is change cyclically.
26
Recording Press BLUE key at Live Play mode can display record setting dialog, there are two kinds of record mode be supported by STB: Now and Schedule.
If want to set schedule record, select Schedule, input Start and End time. Press OK, the recording will add to schedule. It can only save one scheduled record. If set another scheduled record, the original will be replaced by new one. If switch to other channel or page, there will one remind window pop up 1 minute before recording start and count down in 30 seconds. After that, the STB will switch back
27
to original page and channel for get ready for record. Press Jump Now to switch
Available Key: STOP Exit Recording and return to Live Play mode. VOD This is VOD (Video on Demand) menu page. (The page may different with different software version by the server that it can support.)
RTSP (RFC2326) - ANEVIA, gobackTV, Packet Ship, Darwin Streaming Server and LIVE555 Media Server. VC1 - Windows Media Server. Select program and click OK to start play. It changes to play screen page after select
28
Available Key (Only available at VOD playing screen): HELP It shows time bar; Press again to show VOD info; again to hide info. It changes cyclically. The VOD info includes the URL of this VOD stream, Resolution, Video and Audio codec type, FPS (Frame Per Seconds) and A/R (Aspect Ration) Time Bar
VOD Info
29
PLAY/PAUSEControl play and pause. When trick playing, stop trick playing and resume to normal speed. Play
Pause
F.R. & F.F.Control VOD trick play. Forward and rewind both have 4 segments. If the video codec is AVC H264, it only supports 3 segments currently. Press again when trick playing increases speed. Fast Forward
Fast Rewind
30
PVR/ Video This PVR/Video page is used for play recorded or local disk file. There are four sub pages: PVR Location, Storage Device, Playlist & Schedule Record. Some STB doesnt have hard disk inside. It can connect USB device to do this. But it may have some performance issue if the device read/write speed is not fast enough.
The Video page is used for the STB that cant support record function. There are only two sub pages: Storage Device & Playlist.
It use PVR page at this section for introduce because it have complete function. PVR Location When this page loaded, it display PVR file automatically. Move the focus to file list item and press OK, there is one function menu pop-up.
31
Add to playlist: Add selected file to playlist. More info: Display more information about video file. It need one *.info file to storage such information. For example, the info files for clip coast.mpg:
name=Coast View description= South Beach started as farmland. In 1870, Henry and Charles Lum purchased 165 acres (668,000 m2) for coconut farming, and his daughter Taylor named it South Beach. Charles Lum built the first.... picturefile=view.jpg Create this file and save as the same name with video file by extension .info, coast.info at this case. And then put this file, preview picture at the same path.
32
Delete: Delete clip file from disk. This action cant recover. Refresh: Refresh the list of PVR Location. Cancel: Close function menu and do nothing. Storage Device Read media file from inside hard disk and USB device (such as flash disk, hard drive, flash memory card). It may support transport stream or program stream format by extension mpg, mpeg, ts, tp, m2t, m2ts, mts; VC1 clip by extension wmv, wma and asf; Xvid or Divx by extension avi; DVD format by extension vob. Not all format be implement by all model, the page only displays the format that be supported.
Click Check button or just insert USB disk, they both trigger checking process. It may take a little time and finally present the disk list or No device found!! message. The
33
Move focus to disk list item and press OK, there is one function menu pop-up.
Open: Open the content inside this disk. Delete all: Delete all directories at this disk recursively. Please attention that it not only deletes the file that STB can support and display, all kinds of files will delete and this action cant recover. Disk Info: Display disk information includes Path, File System, Size Usage, Size Free, Total Size and Size usage diagram. Press Close can close the window and return to function menu.
34
Format: Format selected disk to ext3 file system, all data will lost and cant recover. Please do not turn off power when formatting, and it may take a long time to finish work depending by disk size. All keys block when formatting until be finished.
Refresh: Refresh the disk list of Storage Device. Cancel: Close function menu and do nothing If the focus item is folder, there is one different function menu pop-up. Open: Open the content inside this folder. Rename: Rename folder. Delete: Delete all directories at this folder recursively includes folder itself. Please attention that it not only deletes the file that STB can support and display, all kinds of files will delete and this action cant recover. But the current folder is stay. Delete all: Delete all directories at this folder recursively, but the current folder is stay.
35
Please attention that it not only deletes the file that STB can support and display, all
If the focus item is file, the function menu is the same with PVR Locations item. Playlist The clips that be added to playlist is display here.
The right-top corner displays current repeat mode. It can switch three different modes: No Repeat, Repeat One & Repeat All by BLUE key. Select file that want to start, there is also another function menu pop-up.
36
Play: Start playing clips. Move up: Move up the order of selected clip. Move down: Move down the order of selected clip. Remove: Remove selected clip from list. Remove all: Empty playlist. Cancel: Close function menu and do nothing. Schedule Record If there is already one scheduled record exist, it can check the detail information here.
Press Cancel button can cancel schedule. Playing When video playing, the control is the same with VOD playing
37
Available Key: HELP (Playing)Show elapsed bar, press again show video info, again hide info. It is change cyclically. The bar use video file total size and current location for count. This is different with VOD.
STOP (Playing) Stop video play and return to menu. PLAY/PAUSE (Playing)Control video play and pause. When trick playing, stop trick playing and resume to normal speed. F.R. & F.F. (Playing)Control video trick play. Trick play have 11 segments(-32x, -16x, -8x, -4x, -2x, 1x, 2x, 4x, 8x, 16x, 32x). Press Fast Forward to increase speed; Fast Rewind to decrease speed. RED (Menu)Setup PVR storage location.
GREEN (Menu)Switch different function cyclically. YELLOW (PVR Location & Storage Device)Browser up level directory. BLUESwitch repeat mode. It supports 3 modes: No Repeat, Repeat One and Repeat All. Download This page is for download & play. It can download clips from internet via FTP or HTTP, and then play it locally after download complete. This feature is usually use at low
38
It can support only one working download in the meantime. After finished, it starts next one automatically. The order of list is also the sequence. Move focus to list item and press OK, the item will turn to yellow color with one icon presents. That means this item been selected.
39
Use UP and DOWN key can move its order in the list. Press OK again, the item un-select and return to normal color. Done This tab presents the clips that already full downloaded and stored into storage location. Move focus to the item and press OK can start playing.
Playing When video playing, the control is the same with VOD playing Available Key: HELP, STOP, PLAY/PAUSE, F.R. & F.F. Same with Video/PVR page.
40
GREENSwitch different function cyclically. YELLOWRemove clip from downloading list or Done list. Must select or focus clip item first and then press this key. Photo This page is just a demo and not fully functional. All photos are predefined at web page. The photo format that STB can support is JPEG/JPG, (Animation) GIF, BMP & PNG. Select photo from photo list page and click for view.
The view page of photo just like below, it can switch to previous or next photo. Click back can return to list page.
41
Click slideshow button at list page, input time interval between 3 to 10 secs to start a slide show. It returns to list page when slide show finishing. Music This Music page is used for playing MP3 file at local disk. If the USB is already connecting before entering this page, it shows disk partition when the page is loaded; If connect after, please click check button to get disk lisk. When un-plugging or plugging USB, the browser window refresh disk list automatically.
The left part of Music page is Browser, it can use for find the music file that want to play. It shows 10 items per page. If the item at current path is more the 10, The previous and next button are displayed for switching page. Move focus to and press OK at remote controller can change browser path to up level. button
42
Move focus at browser, the name slides for display full file name. Click a file to add it into playlist. It can switch repeat mode by clicking repeat buttons. There are 3 modes: No Repeat, Repeat One and Repeat All. The button that is highlighted means current mode.
There are four buttons at left side of PlayList. The functions from top to bottom are: Delete One Delete selected song from playlist. Move Up Move selected song up at playlist Move Down Move selected song down at playlist Delete All Empty playlist.
43
These functions are used for edit playlist. First, select song that want to edit from playlist (The background color switches to blue). Then move focus to any edit button and click. Click button, the left window switches between Browser and Playing. Click button to start playing music. It provides Stop, Previous Track, Play, Pause and Next Track buttons for control music playing.
Below key is only available when playlist is not empty. Available Key: STOP Stop playing. PLAY/PAUSE Play song ,pause and resume. F.F. Jump to next track. F.R. Jump to previous track.
44
Status This page displays status info at current STB. There are 4 parts information present at this page: Current System Time The right-top corner shows current time. It can verify NTP protocol is OK or not. Network Information IPv4 and IPv6 IP address. If this STB doesnt get any IPv4 address, it shows 127.0.0.1 as IP address.
Device Information Mac Address and Serial Number that helps for identify different device.
45
Version Information Different layer software version: Bootloader, Firmware, Operation System, Middleware (EPG) and Browser. After software update, it can verify new version at this page easily.
HomePNA If the STB can support HomePNA, it can check related information here: CG3210 Device, MAC Address, Version, H/W Config, Tx Packet, Rx Packet, Tx Byte, Rx Byte, Rx CRC, Tx Dropped, Rx Dropped, Utilization.
Available Key: GREEN Switch different function cyclically. YELLOW Update status info.
46
Diagnostic It provides one easy and quick way for test device function. There are 4 different tests that can be found at this page: Live TV Test, VOD Test, Network Test and HomePNA Test. Connect USB keyboard for help input test parameters is recommended.
Live TV Test It can set 4 channels at one time for test, no matter UDP multicast, UDP unicast, HTTP unicast or HTTP file. Please refer Chap. VI for TV address format. Move focus to the TV channel that wants to receive and press PLAY/PAUSE key to start test. The TV program display on screen and the information shows at below state block with white border.
If this channel is out of service, there is nothing on screen and the error information
47
Press STOP key can stop TV stream and BLUE fey can toggle full screen. VOD Test It can also set 4 VOD stream at one time for test, no matter RTSP (RFC2326) VOD or VC1 VOD. Please also refer Chap. VI for VOD address format.
Move focus to the VOD program that wants to receive and press PLAY/PAUSE key to start VOD stream. The VOD program play on screen and the information shows at below state block. If this channel is out of service, there is nothing on screen and the error information show at status block, too. The PLAY/PAUSE, STOP, F.F. and F.R. keys can control trick play, pause, resumeetc. just like VOD page. The states OSD (2x,-4x) shows on right-top corner whether full screen (Press BLUE) or small screen.
48
The Web can use for check web page or local file, this is only for check URL link is OK or not, no further support. Input URL and press OK at remote when focus at GO button. The WEB page shows at bottom iframe area. The Ping function can accept IPv4 or IPv6 IP address and FQDN (Fully Qualified Domain Name). Input the address and move focus to GO button. Press OK at remote and the ping result shows at state block. The full screen function is not available when network test. HomePNA Test Test HomePNA connection, the left table lists all HomePNA station that be detected.
49
Choice one station that want to test, click OK button at remote. The station will put into right diagram. Move focus to Test button and press, the test start and connect information includes Link Rate, Rx Power and SNR update automatically at real time.
Available Key: GREEN Switch different function cyclically. BLUE Toggle full screen when TV or VOD Test.
Himi
Home This is initial page of Himi. When press HOME key at remote, it jump to this page. Please use cursor key left and right to select function and press OK for enter.
50
Key for All There are some keys of remote are work for whole Himi pages, it a little different with Kumat page, especially the RELOAD key cant work at Himi: POWER The STB can support 3 different types of power mode. HOME Return to Home page. VOL+ / VOL- Adjust volume MUTE Toggle mute. AUDIO Switch audio track. A/R Switch aspect ratio. IPTV This is the IP TV page. The right-top corner shows channel number at start or channel switched. One hint border at bottom for defines the function of color keys. Press GREEN key can hide it. If the channel doesnt service, the display method of error message is just the same with Kumat TV page.
Available Key: 0-9 Select channel by digital. CH+/- Switch channel. HELP Show channel information
51
DISPLAY Toggle to channel number display. SWAP Swap between current channel and previous channel. RED Subtitle toggle. GREEN Toggle hint bar VOD This is VOD (Video on demand) menu page. Program List The left side is program list; right side is introducing photo that will change when focus on different program. The 1/2 means there are two pages, current is page 1.
52
YELLOW Switch list to previous page. BLUE Switch list to next page. Playing Press OK can start playing. It changes to full screen, If the clip that be selected is not available, it shows error message at screen like Kumat VOD page. Available Key: HELP Display time bar and decode info.
STOPStop VOD and return to VOD menu page. PLAY/PAUSEControl VOD plays and pauses. When trick playing, stop trick playing and resume to normal speed. F.R. & F.F.Control VOD trick play. Forward and rewind both have 4 segments.
53
File Browser It only displays folders and files that can support. The mask is based by extension file name. Search file that want to play and press OK to start play.
Available Key: RED Refresh browser at current location. GREEN Change location to up level. YELLOW Switch list to previous page. BLUE Switch list to next page. Playing The top-left corner displays current playing file name when start. If the clip is not available, it shows error message at screen like Kumat PVR/Video page.
54
STOPStop video and return to file browser page. PLAY/PAUSEControl video plays and pauses. When trick playing, stop trick playing and resume to normal speed. F.R. & F.F.Control video trick play. Trick play has 11 segments. Press Fast Forward to increase speed; Fast Rewind to decrease speed. CH+/CH-Jump to previous / next video clip. If the next/previous clip is the last/first file at current folder, it jump to first/last file. PHOTO This Photo page is used for play local USB storage file. This feature can only support small photo currently because the limitation of memory size inside STB. File Browser It only displays folders and files (jpg, jpeg, gif, png & bmp) that can support by STB. The mask is based by extension file name. The right preview window updates by item is focused. Search file that want to play and press OK to enter full screen view.
55
Available Key: RED Refresh browser at current location. GREEN Change location to up level. YELLOW Switch list to previous page. BLUE Switch list to next page. Full Screen View The right-bottom corner displays the order of current file.
Available Key: F.R Display previous photo. F.F Display next photo. STOP Leave full screen and return to list page.
56
MUSIC This Music page is used for play local USB storage file. And it can play background after leaving music page. The music be stopped automatically when TV, VOD or Video is playing. It only displays folders and files (mp3) that can support by STB. The mask is based by extension file name. Search file that want to listen to and press OK to start playing.
There is one information bar under browser: It displays filename, time bar, repeat mode, total length and current position about the MP3 that is playing currently.
Available Key: PLAY/PAUSEControl music plays and pauses. STOPStop playing. F.F.Jump to next track.
57
GREEN Change location to up level. YELLOW Switch different repeat mode: No repeat, Repeat one or Repeat all. SETUP This is setup page. Please refer the Kumat OSD for the detail of these items.
Error Page
If error be detected, it jumps to error page and displays error type, it can press Reload button for try again or input other URL that want to connect and press Go.
58
V. Setup Page
Press HELP button on remote during portal page loading when STB start to access setup page.
Press HELP
There is one i button at left-bottom corner, move focus here and press OK can display System Info about current device.
Input 1234 as password with number keys, move focus to OK by clicking cursor R key and then click OK to enter normal setting. Follow the step at wizard to modify setting at STB.
59
DHCP Use DHCP way for get IPv4 IP address and necessary value. This is default value at new STB. Static Set static IP for STB. IP Address, Netmask & Default Gateway are necessary and cant keep blank; Primary DNS & Secondary DNS are optional.
60
PPPoE Input the User Name and Password (and the Confirm Password column again) which provided by your ISP. Uncheck the Use Peer DNS by press OK on the remote controller if you want to automatically get the DNS information from the ISP PPPoE server, otherwise input the Primary DNS, Secondary DNS manually.
Config Setting
There are some server, page and protocol value be set at this step.
61
Portal Page The portal page means the homepage that STB links after booting or press HOME key at remote. It can set to Kumat, Himi or User. If User, please input address at bellow input text. Upgrade URL The upgrade URL means the page that STB links to check if software upgrade needed or not, and it only check one time after booting. If this value is empty, the STB links to portal page directly after booting without checking. The address format of Portal Page and Upgrade Page can be http(s) web page or html file inside STB. For example: http://192.168.17.7/v2.0/home/home.html https://[2012:2233:f3e8:5da2::188]/index.html file:///root/titanium/browser/epg/upgrade/upgrade.html NTP Server Input NTP server address (IP or FQDN) to synchronize device time. Time Zone Select time zone of current location. There are two different ways: Quick or Advanced. The Quick way only need to select time offset; the advanced way can support Daylight Saving Time(DST) or Half Time zone , please refer Appendix C for more information. Correct time is necessary for some DRM engine. IGMP Version Select IPv4 IGMP (Internet Group Management Protocol) version, it supports version 1, 2 and 3. Please set correct version that multicast server can support. Move focus to NEXT and click OK to enter next step.
62
RS/RA Use Router Solicitation(R/S) & Router Advertisement(R/A) for communicate and structure v6 IP address and necessary value. DHCP Use DHCPv6 to get IPv6 IP address and necessary value. Static Set static IPv6 address for STB. IP, Prefix & Default Gateway are all necessary.
MLD Version Select IPv6 Multicast Listener Discovery version. Version 1 and 2 are implemented. Edit Source List If MLD Version set to 2, this item displays. Enable to edit source list table at next step.
63
Add Move focus to Add button and click OK. Input Multicast Source and Multicast Group address. Click Save button.
The source item has been added to list and shows on table. Repeat this way to add multi-list. The maximum of table items is 20.
64
Edit Move focus to the pencil icon of the item that want to edit and then click OK. The same pop-up window displays. Modify value and click Save to finish.
Delete Move focus to the list item that want to delete and click OK. The item changes to highlight with yellow color. Move focus to Delete button and click OK. Confirm at pop-up dialog box to delete it.
65
Server Address Input the address (IP or FQDN) of DRM server. Port Number Input the service port number of DRM server.
66
Input the URL of rootcert that be put at remote server. This item is not necessary because the rootcert file can pre-stored into STB. Prefer VKS URL Input the URL and port number of prefer VKS server Log Error Level The log is more detail (10) or more summary (1). Move focus to NEXT and click OK after the setting.
Display Setting
This step set character decoding value and display setting.
Default Language Select the default language of EPG. Secondary Encoding Select if the character cant decode by default encoding (default language), which kinds of decode that want to use. If the <lang=> tag exist at HTML page, the priority is high than this setting. Display Region Set display region to different value affects lots of display item includes dialog-box, error page, setup epg And the sample EPG all set for fit 1280x720. If change to different region value, please adjust layout of HTML file by CSS or Java Script for best view. Enable Throbber This function can be enabled by the check box. The specific pattern will be shown in
67
Access setting
This step set remote access setting.
Enable Remote Controller Repeat Function Some of the keys (such like vol+, vol-, ch+, ch-) on the remote controller can be turn on repeat mode. This function can be enabled by the check box. If you enable this, you will also need to set up the following 3 parameters: Repeat Threshold (ms) This is the time delta between the key pressed continuously and repeat function enabled. The default setting is 600 milliseconds. (400 ms~2000 ms) Repeat Interval (ms) This is how long will the remote controller trigger a press key signal when in repeat mode. The default setting is 400ms. (400ms~2000ms) Switch Channel Response Time (ms) This is the delay time between the ch+ (or ch-) unpressed and the STB start to connect the TV channel. This setting value should be Threshold add 100 ms (or bigger). The default setting is 700ms. (500ms~2100ms) Enable SSH Enable the SSH as remote access methods to the STB here SSH Port Number The port of SSH is changeable to improve the security. Enable Telnet
68
Advanced Setting
Input 5678 as password at setup start, it enter Advanced Setting page.
Upgrade Firmware URL Please refer Upgrade Software chapter for more information about Upgrade Firmware URL. Reset Factory Default Move focus to Reset button and press OK. Confirm at pop-up dialog box, then STB will reboot and reset to the factory default. Warning: This function will reset all the parameters back to the factory default and cannot be recovered back. Please make sure before doing this. Password / Advanced Password The character of password is number (0-9) only, the length can be 0 to 8 and cant the same with Advanced Password / Password. If leaves empty means no password. Input the new password twice and then click Save button. The page will reload and waiting for login with new password. The password can reset to default when Reset Factory Default operation is
69
Check the checkbox to enable watch dog. If the STB doesnt response after the input value of Timeout (sec.), the STB will reboot automatically.
70
Un-compress demo_page.tgz at http path and then follow chapter V at this document to modify portal page url. It should like: http://<http server ip>/<path>/kumat/menu/menu.html or http://<http server ip>/<path>/himi/home.html
71
tv://[ff3e::30]:20000?src=fec0::1&src=fec0::2&src=fec0::3 The multicast source be defined here has high priority than setup at last chapter. If it specify different source for same multicast channel, the setting of setup page will be ignored. UDP Unicast Channel It also can define unicast channel at channel array, the DOM parameter xsystem.ip4Addr can get current working IPv4 address of this device automatically, and the only value need to change is port number that specify at this line: "tv://" + xsystem.ip4Addr + ": 1234" Just modify 1234 to new port number. HTTP Multicast / File Channel The format of http channel is: IPv4 httptv://<IPv4 multicast ip>:<port number> IPv6 httptv://[<IPv6 multicast ip>]:<port number> It both can specify by FQDN httptv://<FQDN>:<port number> There is one more method that STB can support is play transport stream clip by http protocol, just input file location URL by below format: httptv://<FQDN>/[PATH]/<FILENAME> For example, these are all correct value: httptv://10.10.10.1:1234 httptv://[fec0::1]:1234 httptv://streamer.ipstb.orion:1234 "httptv://10.10.10.1/stream/test.ts" "httptv:// [fec0::1]/stream/test.mpg" If 20 channels is not enough for test, just extend this array, but the maximum of array length is 999 because it only define 3 digit by select by digital. function Channel(){ this.chTab = { {"1","ACC","tv://224.6.6.70:1234"}, {"2","XTV","tv://[ff3e::10]:1234"}, {"3","BVC","tv://224.6.6.71:1234?drm=1"}, {"4","NCC","tv://[ff3e::11]:1234"}, {"5","QTV",tv://224.6.6.100:10000}, //Channel URL modified //UDP IPv4 format
72
//HTTP IPv6 format {"23","Sky","httptv://[fec0::1]:1234"}, {"24","NASA","httptv://[fec0::1]:2345"}, //HTTP FQDN format {"25","PLAY","httptv://streamer.ipstb.orion:1234"}, {"26","KCC1","httptv://streamer.ipstb.orion:2345"}, {"101","KCC2","httptv://10.10.10.1/stream/Bikini_California.1440x1080.ts"}, {"102","CCITV","httptv://[fec0::1]/stream/test.mpg"}, {"103","Feeling","httptv://streamer.ipstb.orion/stream/test.tp"}, {"201","News77","tv://"+xsystem.ip4Addr+":1234"}}; // Unicast channel }
Program Image
Program Description
The format of Program URL is: <protocol>://<ip address>:<port>:<path>?<advanced parameter> The protocol of RTSP is rtsp; the VC1 is http, mms and mcast. For example:
73
If want to add one program, just add one array item and put image at vod/images folder this.rtspProgram = { {"Anevia VOD", //RTSP (RFC2326) VOD program //Program Title //Program Image
//Program Description "rtsp://anevia.ipstb.orion/Demo_2.ts"}, //Program URL {"GobackTV VOD", "bikini.jpg", "MPEG2 720p 20M", "rtsp://gobacktv.ipstb.orion/Bikini_California.1440x1080.ts"}, {"Packet Ship VOD", "sport.jpg", "MPEG2 1080i 19M", "rtsp://10.10.10.7/sam" }, {"Darwin Streaming", "bourne.jpg", "MP4 720p 4M", "rtsp://10.10.10.8/bourne_ultimatum-tlr1_h1080p.mp4"}, {"Darwin Streaming", "nature.jpg", "H264 SDP 3M", "rtsp://10.10.10.8/default.sdp"}, {"Live555 Media", "european.jpg", "MPEG2 1080i 23M", "rtsp://10.10.10.8:8554/JVC_HD_demo_2005_1_1080i.ts"}, {"Live555 Media", "matrix.jpg", "MPEG2 1080i AC3 14M", "rtsp://10.10.10.8:8554/MatrixReloaded_MPEG2_14.2M_AC3_384_03.ts"}, {"Live555 Media", "building.jpg", "H264 20M", "rtsp://10.10.10.8:8554/20M.ts"} }; It needs reload page to take affect when HTML page content be changed.
74
Every <Channel></Channel> element means one channel, the limit of channel count is still 999. VOD Program The VOD program setting is inside <VodList></ VodList> block. The first element <ImageLocation></ImageLocation> specify the location of introducing photo. Format of program is : <VodList> <Program> <Name>Program_Name</Name> <Image>Program_Photo_Name</Image> <Rating>Program_Rating</Rating> <Desc>Program_Summary</Desc>
75
Every <Program></Program> element means one program. Accumulate this element for create program list.
76
Utilities
OS TFTP Server FTP Server Linux tftp-server ftp Windows 3CDeamon 3CDeamon
Auto Upgrade
1. Un-compress demo_page.tgz and enter upgrade folder. 2. Edit upgrade_path.js. The format of firmware URL is: <Protocol>://[<Server Path]/<Firmware Name> If it needs username and password for access FTP or HTP server: <Protocol>://<Username>:<Password>@[Server Path]/<Firmware Name> HTTP Example var upgPath = "http://10.10.10.11/firmware/STB_1021.1002.1120.7777.img" FTP Example with user name & password var upgPath = "ftp://abc:123@10.10.10.11/STB_1021.1002.1120.7777.img" TFTP Example var upgPath = "tftp://STB_1021.1002.1120.7777.img" 3. Put new firmware to URL that specify at last step. 4. Start STB, enter Setup page. Modify Upgrade URL to the file path of upgrade.html or upgrade_no_confirm.html at outside HTTP server. Save setting and reboot STB. 5. If firmware version is different, the STB jump to upgrade page. upgrade.js
77
6. If upgrade from version 4031 or high, there is one progress bar displays upgrade procedure. Others only show waiting text. upgrade.js
upgrade_no_confirm.js
The upgrade procedure starts automatically 7. If it meets error when upgrade, the procedure stops and shows error number and error message. upgrade.js
78
upgrade_no_confirm.js Please check setting and reboot STB for try again.
8. Device reboot automatically if upgrade successful. After reboot, it can check new software version at Status or Setup page. If want to reset setting to factory default, please enter Setup page.
Manual Upgrade
1. Click HELP button at remote during portal page loading to access setup page. Input 5678 as password with number keys, move focus to OK by clicking cursor R key and click OK to enter. 2. Input Upgrade Firmware URL. Move focus to Start button and click OK. Confirm
79
at pop-up dialog box about device will reboot after upgrade to take it affect. Press
3. It will take some time (30sec ~ 3min) by different model to upgrade. Please do not power off STB and all keys at remote controller are set to disable when upgrading. When its done, the STB is going to reboot.
4. If upgrade failed, it shows error message and error code. There are two options when fail: Retry and Return. Retry Before Retry, please check your setting. The STB will restart upgrade procedure by original setting. Return Return to last step, it can modify setting and do it again.
80
Auto Recover
If any kind of fail (such as power fail) during upgrade causes the STB software crash, it can auto recover when device booting. Please follow below step: 1. Keep last good upgrade environment. 2. Do power cycle reboot at STB. 3. The STB uses last good firmware upgrade URL to complete this step and it show Software Recovering message at screen. The progress displays by green bar at screen bottom.
4. If recover successful, show Recover OK message for a while and the STB reboot automatically.
81
5. If recover fail, Recover Fail message be displayed. Please refer next section Manual Recover for recover device
Manual Recover
If any kind of fail during auto recovery, the STB can have a second chance to recover by DHCP option. Set the upgrade URL in DHCP option 14 (Merit-dump file). The recovery result can be sent to syslog server if DHCP option 7 (log server) is set. If Linux environment, please add below line into subset at dhcpd.conf file and then restart dhcp server. option merit-dump <protocol>://<PATH>/<FILENAME> For Example: option merit-dump ftp://10.10.10.1/stb_1011.0101.0120.4025.img If Windows environment, right-click Scope Options. Enable 014 Merit Dump File
82
Reboot the STB by unplug-then-plug the power wire, it will start to do manual recover after power on.
There is another instruction at Appendix B for doing manual recover without structure minimum configuration environment. "Manual Recover" needs bootloader version 1.2.10 or above to support. Please check at Status or Setup page.
83
84
85
If you want to monitor another stream, just close this application and run again; if you want to change source, select Select Source from File. The Select input source window will pop-up. Pick one source, click OK and then restart application.
86
4. Select the Base Directory as where the firmware image file is placed. Then check on the TFTP Server, DHCP Server and Syslog Server to turn on them. Keep others as default setting. Then click OK to save.
87
5. Switch to DHCP Server page to input below options: i. IP pool starting address: 192.168.1.100, for example. ii. Size of pool: 10 (at least 1 or bigger). iii. Mask: 255.255.255.0 iv. Additional option:14 v. The right column of Addition option: The format is tftp://Server interfaces/firmware image file name In this case, you should input: tftp://192.168.1.10/stb_1011.0101.0120.4025.img. vi. Press Save to save all the setting.
88
6. Close and restart the tftpd32 to reload the setting. 7. Directly connect the settop box to your target pc with network cable. 8. Reboot your settop box by unplug-then-plug the power wire. 9. The IP information of settop box will show in the message window if setting is correct after all the steps. 10. Settop box will start to do manual recover after power on.
89
90
specifies when the change is made back to standard time. These fields may have the
This specifies day [d] of week [w] of month [m]. Week 1 is the first week in which day [d] occurs and week 5 is the last week in which day [d] occurs. Refer to following example for more detailed reference. Example:
DECEMBER (M12) Sun (0) First (1) Mon (1) Tue (2) Wed (3) 1 Thu (4) 2 Fri (5) 3 Sat (6)
(M12,1,4)
Second (2) 4 5 6 7 8
(M12,1,5)
9
(M12,1,6)
10
(M12,2,0)
Third (3) 11
(M12,2,1)
12
(M12,2,2)
13
(M12,2,3)
14
(M12,2,4)
15
(M12,2,5)
16
(M12,2,6)
17
(M12,3,0)
Forth (4) 18
(M12,3,1)
19
(M12,3,2)
20
(M12,3,3)
21
(M12,3,4)
22
(M12,3,5)
23
(M12,3,6)
24
(M12,4,0)
Fifth (5) 25
(M12,4,1)
26
(M12,4,2)
27
(M12,4,3)
28
(M12,4,4)
29
(M12,4,5)
30
(M12,4,6)
31
(M12,5,0)
(M12,5,1)
(M12,5,2)
(M12,5,3)
(M12,5,4)
(M12,5,5)
(M12,5,6)
Samples
The following samples indicated related Abbreviations & SDT & DST format Case 1 Abbreviations CLT CLST Full Name Chile Standard Time Chile Summer Time Location South America South America Time Zone UTC - 4 hours UTC - 3 hours
DST Start at 2nd Sun. of Oct. at 00:00, finish at 2nd Sunday of March at 00:00
91
1 Sunday 2
nd
st
Sunday
Time Zone setting will be CLT4CLST3,M10.2.0/0,M3.2.0/0 STD offset DST offset Case 2 Abbreviations CET CEST Full Name Central European Time Central European Summer Time Location Europe Europe Time Zone UTC + 1 hour UTC + 2 hour Time: 00:00:00 Sunday: 0 Week: 2nd Month: Oct.
DST start at last Sunday of March at 02:00, finish at last Sunday of Oct at 03:00
4th Sunday
5th Sunday
Time Zone setting will be CET-1CEST-2,M3.4.0/2,M10.5.0/3 Case 3 Abbreviations CHADT CHAST Full Name Location Pacific Pacific Time Zone UTC + 12:45 hours UTC + 13:45 hours
DST start at last Sunday of Sep. at 02:45, finish the first Sunday of April at 02:45
92
Note: In some specific case, the last week could be the forth or fifth week. Please refer to http://www.timeanddate.com/worldclock/timezone.html?n=195
Reference
For more details, please refer to below website: - Time Zone "abbreviations" http://www.timeanddate.com/library/abbreviations/timezones/ - Advanced time zone string settings with daylight saving time http://linux.die.net/man/3/tzset