Professional Documents
Culture Documents
BY
Overview
Introduction Basic working of the system System block diagram Flowchart System Circuit diagram Things required for Construction of the project Construction procedure Application of the System Advantages and Disadvantages Future planning Possible improvement Acknowledgements and References Conclusion
Introduction
In our modern busy days life we sometimes forget to switch off devices while leaving home, so we need to operate devices while we are no able to access them physically. So the goal of our project is to design an embedded system which can control devices by sending a specific SMS from a cellPhone. The embedded system is programmed to control the devices according to commands from a remote.
GSM receiver decodes the sent message and sends the command to the microcontroller.
Microcontroller issues commands to the appliances and the device connected will switch ON/OFF.
LCD DISPLAY
RELAY 1
Tx
LAMP
SMS
NOKIA 3315
Rx
ATtiny 2313
RELAY 2
FAN
GND
RELAY 3
WATER PUMP
FLOW CHART
START
Device Initialization
Reading SMS/Sensor Status SMS NO Received ? YES Reading SMS from SIM card and compare with default command Device status is sent to owners Mobile
YES
SOFTWARE
WINAVR PCB WIZARD
TECHNOLOGY GSM (Global System for Mobile Communication) Launched in 1991 by Radiolinja in Finland 900/1800MHZ: uplink and downlink(Frequency band)
Circuit Diagram
Construction Procedure
Development and testing of the software Development of the circuit Programming the Microcontroller
Application
Wireless automation and control. Remote monitoring. Alarm and notification systems. Automatic meter reading.
Advantages
Global Range
Disadvantages
Delays in mobile network Need of a mobile phone entirely dedicated for the system.
Theft alert
Conclusion
In this era when the number of mobile phones users growing at a high rate, this system makes use of the mobile networks to provide the users with a simple and cheap home automation system.