Professional Documents
Culture Documents
w ww.fehr.com
Order by
Product Index
Angle Shear .............................................22 Bearing Plates ..........................................30 Brackets Bottom Brackets ...................................... 11 Top Brackets ............................................ 11 Cable .......................................................33 Cable Assemblies Extension Cables .....................................38 Spring Containment Cables ......................38 Torsion Cables .........................................37 Truck Door Cables ...................................44 Cable Accessories Thimbles................................................ 34 Wire Rope Clips ...................................... 34 Cable Spools ........................................... 34 Cable Cutters ...........................................36 Swaging Tools .........................................36 Cable Sleeves & Stops...............................35 Cable Puller .............................................34 Chain Hoists .............................................31 Cones & Drums .........................................29 Couplers ...................................................29 Deadbolts .................................................15 Decorator Angle .......................................31 Disconnect Devices ...................................14 Electrical Cords ........................................13 Fasteners ............................................. 40-41
Handles Lock Handles ..........................................15 Lift Handles ............................................16 Hardware Kits Fastener Bags........................................39 Lock Bags.................................................17 Hinges ................................................... 9-10 Jamb Brackets ..........................................31 Key Switch ...............................................14 Lift Handles .............................................16 Locks Lock Handles ..........................................15 Rim Cylinders & Deadbolts.......................15 Side Locks ...............................................16 Spring Latches .........................................17 Lock Bars ................................................18 Lock Packages .........................................17 Low Headroom Hardware .........................14 Lubricants ................................................42 Nails ........................................................20 Nylon Rope................................................ 9 O&E Kits ..................................................14 Operator Reinforcing Brackets ..................13 Perforated Angle ......................................22 Pulleys .....................................................28
Icon Key
Throughout the catalog, the following icons will provide additional, important information relating to specic products.
Safety Alert
Details choices for a particular product other than those listed in the charts.
Fast Find
Quick Close Fixtures .................................14 Rollers ....................................................7-8 Scrubs Cleaner ........................................42 Sheaves ....................................................28 Shaft Coupler ...........................................29 Side Locks ................................................16 Sleeves .....................................................35 Slipit Lubricants .....................................42 Springs Torsion Springs...................................23-26 High Cycle Torsion Springs .......................25 Extension Springs ....................................27 Lock Bar Spring.......................................18 Spring Bumpers ....................................... 31 Spring Repair Block ................................ 24 Spring Fittings ..........................................29 Spring Latches and Sets ............................17 Step Plates ...............................................16 Stops ........................................................35 Swage Fittings .........................................35 Swaging Tool Kit ......................................35 Swivels.....................................................18 Terms & Conditions ................................... 4 Thimbles ..................................................34 Tools ........................................................36 Torsion Spring Safety Collar ......................25 Truck Door Hardware .......................... 43-44 Warnings & Cautions ................................. 4 Weatherseal ........................................ 20-21 Winding Bar ............................................34 Wire Rope Clips .......................................34 White Powder Coated Hardware ...............12 Zap Jackshaft Operators Residential & Commercial Operators .........46 Heavy Duty Commercial Operators ...........47 Battery Back Up, Autolock .......................47 Operator Covers ..................................46-47 Photo Cell, Antennae, Radio Receiver ........48 Motor Cable, Super Grip Transmitter .........48
Phone:
www.fehr.com
will be based upon prices in effect at time of shipment. Check our website for up to date pricing. Express accepted. Net Cash 10 days for approved accounts.
MINIMUM INVOICE: $50.00, FOB Saugerties, NY
goods or exposed damages. Freight claims for damaged or missing materials are the responsibility of the buyer. All cartons must be inspected for concealed damage or shortage upon receipt. Claims must be submitted to the carrier within five business days.
RETURNS: Fehr Bros. wants you to be 100% satisfied
returned checks.
with our products and service. Merchandise in its original condition may be returned for credit within thirty (30) days of receipt of material. Our Customer Service Department will provide a Return Material Authorization (RMA) form and number on request. Call 800-431-3095. Affix the RMA number labels to the outer carton and return the form with the material, freight paid, to the warehouse indicated on the RMA instructions.
are shipped FOB Shipping Point, Freight Allowed and Prepaid on single shipments of $250 or more within the continental United States. All other shipments are FOB Shipping Point, Freight Collect. Fehr Bros. Industries, Inc. reserves the right to ship by carrier of our choice. Freight paid orders may be subject to a Fuel Service Surcharge. COD fees, redelivery, inside delivery, lift gate, call for appointment, over length, residential delivery, airfreight charges and any other special handling or packaging charges are the responsibility of the customer. Bills of lading must be signed with exception for missing
$$ SAVE $$
A restocking fee of 15% plus freight charges will apply. No freight collect or COD shipments will be accepted. Unauthorized shipments will be returned at the customers expense. Special order material and material cut to custom specifications are not returnable.
WARRANTY: Fehr Bros. Industries, Inc. warranties its
products against defective materials and workmanship at time of shipment. Damage in transit is the responsibility of the carrier. Claims are subject to inspection by our authorized representative, and liability is limited to replacement of material or refund of the purchase price. We cannot be responsible for labor charges and consequential damages.
Warnings, and Cautions Governing the Sale and Use of Cable, Springs and Attachments
All products are sold subject to the following Warnings and Cautions and with the express understanding that the purchaser and/or user are thoroughly familiar with their proper use. Fehr Bros. Industries, Inc. assumes no responsibility for the use, misuse or misapplication of its products.
WORKING LOAD LIMIT:
The Working Load Limit (WLL) is the maximum load which should be applied to the product under any condition. WLL is based on a load being uniformly applied in a straightline pull. It is the responsibility of the ultimate user to determine a WLL for each application. Many factors should be considered: including, but not limited to, loads applied, speed of operation, acceleration, length of cable, shock loads, abrasion, corrosion, size, condition of drums and sheaves, and the danger to life and property should a cable break.
BREAKING STRENGTH:
WARNING:
Garage Door Cables, Springs, and attachments are under significant load and installations, adjustments and replacements should be performed only by a trained professional. Spring containment cables should be used in conjunction with Extension Springs. Aircraft Cables are not suitable for use in aircraft controls.
AVOID SHOCK LOADS:
Loads exceeding the static load caused by rapid change of movement. WLL will not apply.
INSPECTION:
Breaking Strengths apply only to new, unused Aircraft Cable. Do NOT use Breaking Strength for design or rating purposes. Use Working Load Limit instead.
MARKING REQUIREMENTS:
U.S. Customs Law requires that the end user of imported products be informed of the country of origin. All imported products sold by Fehr Bros. are marked accordingly. Resellers are responsible to relay country of origin information to the end user.
No product can operate indefinitely at its rated capacity. Cables must be lubricated and maintained in accordance with normal safety standards. Do not kink, knot or crush. Cable must be inspected regularly for any deterioration which may result in the loss of original strength. User must determine whether further use of the cable would constitute a safety hazard to life or property.
www.garagedoorsupplies.com
F A X
FAX TO: 888-352-1790
CUSTOMER ID#_______________________________
BILL TO: _________________________________________________ _________________________________________________ _________________________________________________ _________________________________________________
O R D E R
F O R M
ATTN:_______________________
Quantity
Part#
Description
Unit Price
Credit Card #____________________________________________ Exp. Date ____/____ Name as it appears on card ___________________________________________________ Security Code
_______
_______________________________________________ Purchasing Authorization
w ww.fehr.com
2" Rollers
2" Steel Rollers
Part# ROLL6 ROLL9/DP
ROLL6
ROLL4/DP ROLL26L/DP
ROLL26XL ROLL26L
ROLL26XL/DP
Description 2" Frantz Type w/ 5/16"diameter Stem 2" 7 Ball Steel w/ 4" Stem rating: 35 lb load, 10,000 cycles 8' door 2" 10 Ball Steel w/ 4" Stem rating: 75 lb load, 15,000 cycles 12' door 2" 10 Ball 7" Long Stem rating: 75 lb load, 15,000 cycles 12' door 2" 10 Ball 9" XL Stem rating: 75 lb load, 15,000 cycles 12' door
ROLL4
Description 2" Bearingless Nylon w/ 4" Stem rating: 50 lb load, 10,000 cycles 8' door 2" 10 Ball Nylon w/4" Stem rating: 125 lb load, 20,000 cycles 12' door 2" 10 Ball 7" Long Stem Nylon rating: 125 lb load, 20,000 cycles 12' door 2" 10 Ball 9" XL Stem rating: 125 lb load, 20,000 cycles 12' door
ROLL26NL-XXL
Product Information
Fehr's 26NL and Capped rollers have a redesigned bearing race providing for a higher load rating and extended cycle life. Capped rollers have a Solid Nylon Cap on the roller face and a Nylon seal on the backside protecting the bearings from dust, dirt and moisture. Pre-lubricated with low temperature grease for long life.
ROLL26CAP
Precision Bearings
Description 3" Nylon 4" Stem w/Precision Bearing rating: 150 lb. load, 100,000 cycles 12' door 3" Nylon 7" Long Stem w/Precision Bearing rating: 150 lb. load, 100,000 cycles 12' door 3" Nylon 9" XL Stem w/Precision Bearing rating: 150 lb. load, 100,000 cycles 12' door
ROLL27NL-XXL
Description 3" 10 Ball 4" Stem rating: 150 lb load, 50,000 cycles 12' door 3" 10 Ball 7" Long Stem rating: 150 lb load, 50,000 cycles 12' door 3" 10 Ball 9" XL Stem rating: 150 lb load, 50,000 cycles 12' door
Pcs/ Ctn 24 24 24
Sealed Bearings
ROLL54
ROLL51 ROLL52
ROLL51
ROLL53 ROLL54
Description 2" Precision Bearing 5-1/4" Stem rating: 150 lb load, 100,000 cycles 12' door 2" Precision Bearing 8-1/4" Stem rating: 150 lb load, 100,000 cycles 12' door 3" Precision Bearing 5-1/4" Stem rating: 150 lb load, 100,000 cycles 12' door 3" Precision Bearing 8-1/4" Stem rating: 150 lb load, 100,000 cycles 12' door
ROLL53
Product Information
8
Ideal for marine and high corrosion environments, e.g. car wash and washdown applications. Stainless Steel shafts and precision sealed bearings for corrosion resistance.
Hinges
18 gauge
Part# GDHINGE 18-1/DP GDHINGE 18-2/DP GDHINGE 18-3/DP GDHINGE 18-4/DP
Hinges
Pcs/Ctn 50 50 50 50
18-1
14 gauge
Part# GDHINGE 14-1 GDHINGE 14-2 GDHINGE 14-3 GDHINGE 14-4 GDHINGE 14-5 Dealer Packs Pcs/Ctn 50 25 25 25 25
Hinges
Bulk Pcs/Ctn 100 75 75 75 75
14-1
11 gauge
Part# GDHINGE11-1/DP GDHINGE11-2/DP GDHINGE11-3/DP GDHINGE11-4/DP GDHINGE11-5/DP GDHINGE11-6/DP GDHINGE11-7/DP GDHINGE11-8/DP GDHINGE11-9/DP Dealer Packs Pcs/Ctn 24 12 12 12 12 12 12 12 12
Hinges
GDHINGE11-1
Hinges
PPHINGE-SB
PPHINGE-SA
Adjustable Hinges
Part# PPHINGE-SB PPHINGE-SA
GDHINGE16-N
T69035
T61196
10
RESBRAC
LHRCAR
COMBRAC
LHRXL
Description Residential Top Bracket Commercial Top Bracket Low Head Room 4" Top Roller Carrier Low Head Room 8-3/4" XL Top Roller Carrier
Gauge 16 12 12 12
Pcs/Ctn 24 24 24 24
Bottom Brackets
BB7
BB1M
BB5
BB12
Description Gauge Pin Residential Bottom Bracket 13 Milford HD Residential Bottom Bracket 12 Milford LHR Bottom Bracket 11 Clevis LHR Adjustable Bottom Bracket 12 Milford Commercial Bottom Bracket 12 Clevis HD Commercial Bottom Bracket 11 Clevis Commercial Btm Bracket-3" Track 11 Clevis
BBNLHR
Prs/ Ctn 25 12 12 6 12 12 6
BB9 BB3M
11
Part# GDHINGE14-1W GDHINGE14-2W GDHINGE14-3W GDHINGE14-4W RESBRACW BB1MW ILSWIVW LATCHW N/HANDLEW
Description 14 Ga. #1 White Powder 14 Ga. #2 White Powder 14 Ga. #3 White Powder 14 Ga. #4 White Powder Residential Top Bracket Residential Bottom Bracket Inside Lock Swivel Spring Latch Cushion Grip Lift Handle
Description 12 Ga. Perforated Angle 20" Narrow Operator Bracket - 16/ctn 21" Std. Operator Bracket - 12/ctn White Hardware Kit for Single Wide Door
Product Information
12
HKIT-9W includes hinges, top and bottom brackets, capped nylon10 ball rollers, 2 lift handles and fasteners.
Operator Accessories
Operator Reinforcement Brackets
ORB20W
ORB18/21/24
ORB21W
ORBADJ
Description 20" Adj. Narrow Operator Reinforcing Bracket - White 18" Operator Reinforcing Bracket, 1 pc. design, 12 gauge - Zinc 21" Operator Reinforcing Bracket, 1 pc. design, 12 gauge - Zinc 21" Operator Reinforcing Bracket, 1 pc. design, 12 gauge - White 24" Operator Reinforcing Bracket, 1 pc. design, 12 gauge - Zinc Adjustable Operator Reinforcing Bracket with Full Hinge - Zinc
QWIK
Pcs/Ctn 16 12 12 12 12 15
Product Information
Quick Close Fixtures reduce headroom up to 3-1/2. O&E Kits require a minimum of 7 headroom.
LHROEKIT
UL Approved
Part# ELC16/3X025 ELC14/3X003 ELC14/3X006 ELC14/3X009
Extension Cords
Gauge/Length 16/3 x 25 ft 14/3 x 3 ft 14/3 x 6 ft 14/3 x 9 ft
Description SPT Orange Extension Cord SPT Beige Extension Cord SPT Beige Extension Cord SPT Beige Extension Cord
13
BB5
LHRXL BBNLHR
Description Low Headroom 4" Top Roller Carrier Low Headroom 8-3/4" XL Top Roller Carrier LHR Bottom Bracket w/ Outside Hookup LHR Bottom Bracket w/ Adjustable Roller Carrier Quick Close Fixture O&E Low Headroom Kit
Product Information
Quick Close Fixtures reduce headroom up to 3-1/2. O&E Kits require a minimum of 7 headroom.
LHROEKIT
EKIT-100
EKIT-101
14
Options
Deadbolt Locks
Part# LS42 LS68 LS-68-MK Description Stamped Deadbolt Cylinder Set Cast Deadbolt Cylinder Set Cast Deadbolt Set - Master Keyed Pcs/Ctn 10 10 10
Product Information
Mounting hardware included.
LS68
LS42
15
LS147
Rolled Grip
Cushion Grip
Step Plate
Part# STEP/DP Description Step Plate 11 ga. Pcs/Pack 50
Step Plate
16
Striker Plate
Lock Packages
Spring Latch Set
Product Information
Includes handle, inside swivel, latch set w/chain and mounting fasteners. Also available with lock cable.
Product Information
Includes handle, inside lock, lockbar guide, spring and mounting fasteners. Lock bars and discs are sold separately.
Options
17
Lock Hardware
Swivels and Lock Bars
Part# ILSWIV IRHANDLE/DP FORMBAR/DP LB50 LB52 LB55-7/8 LBD5 LBD1 LBS360/DP 3GUIDE/DP Description Inside Swivel Inside Rigid Lock Handle - Square Position Formed Latch Bar - Square Position 50" Lock Bar for 8 ft. Door 52" Lock Bar for 8-1/2 ft. Door 55-7/8" Lock Bar for 9' Door #5 Lock Bar Disc Square Position #1 Lock Bar Disc Square Position 3" Lock Bar Spring #3 Lock Bar Guide Pcs/Pack 10 10 10 10 10 10 10 10 100 100
Inside Swivel
Lock Bar
Featured Products...
Operator
Reinforcement
Brackets.
Expanded line includes a versatile narrow body bracket that works on both 18" and 21" panels. See pg. 13.
Weatherseal
Royal Mouldings Weatherseal
Standard lengths in 7, 8, 9, 10, 12, 14, 16 and 18 ft. Additional colors available as factory direct shipments include Bronze, Red-Brown, Bright White, and Terratone. Anti-weathering agents for superior color retention. Formulated with impact modifiers. Predrilling is not required. Predrilled material is available as factory direct. Packed 15 pcs per carton except where noted. Factory direct shipments (DS) are subject to minimum requirements.
Description 2" Wide w/ Side Flap 2" Wide w/Top Flap 1-7/8" Wide w/Side Flap 1-7/8" Wide w/Top Flap
Description 3-1/4" Wide w/Top Flap - White Aluminum Nails 1-1/4" Length Available in White, Brown, Almond, Sandstone and Hunter Green
WS2591
Extra strong tempered aluminum alloy. Will not red rust or stain. Complies with F.H.A. requirements.
Never Rot Premium PVC extruded millwork. Replacement or new installations. These items are available as factory direct shipments only. Minimums apply.
WS2497
20
Weatherseal
Top Seal
Part# TC138X2.6M TC138X3.0M TS15 Description 1-3/8" Top Cap Black 102" 1-3/8" Top Cap Black 118" Single Flap Top Seal Packing/Ctn. 12 Pcs/Ctn 12 Pcs/Ctn 200'/Ctn
TS138X2.6M
TS15
TS138X3.0M
Reverse Angle
Part# REVANGLE/W REVANGLE/B REVANGLE/BL REVANGLE/G Description Reverse Angle Jamb Seal - White Reverse Angle Jamb Seal - Brown Reverse Angle Jamb Seal - Black Reverse Angle Jamb Seal - Gray Packing/ Ctn 200 ft 200 ft 200 ft 200 ft
No tools or fasteners needed. Slips over angle. Fits standard reverse angle track.
Bottom Seal
Part# WS-BOTSEAL WS138 WS200 Description Bottom Seal ts 1-3/8" Wood Doors PVC Bottom Seal for 1-3/8" Doors 1 Piece, Triple Contact PVC Bottom Seal for 2" Doors Piece, Triple Contact Packing/ Ctn. 300 ft. 12 Pcs 8 Pcs
WS-BOTSEAL
21
Perforated Angle
Powder Coated High Strength Angle
Higher strength to weight ratio over standard angle. Minimum yield of 80,000 psi. Gray or white powder coat baked enamel. Requires use of HD Roper Whitney tool to cut.
Description 1-1/4 x 1-1/4 x 8'3" White P.C. 1-1/4 x 1-1/4 x 8'3" Grey P.C. Part# PERF12-8 PERF12-10 PERF 13-8 PERF 14-10 PERF16-8 PERF18-8 PERF12X2-10
Gauge 12 Ga. 12 Ga. Description 1-1/4 x 1-1/4 x 8' Galv. 1-1/4 x 1-1/4 x 10' Galv. 1-1/4 x 1-1/4 x 8' Galv. 1-1/4 x 1-1/4 x 10' Galv. 1-1/4 x 1-1/4 x 8' Galv. 1-1/4 x 1-1/4 x 8' Galv. 2 x 2 x 10' Galv. Gauge 12 12 13 14 16 18 12
Galvanized Angle
Residential & Commercial. Bright Zinc Finish. Cuts with either HK Porter or Roper Whitney Tool.
TRWAC-4
Angle Shears
Part# TRWAC-4 TRWACBLADE-B TRWACBLADE-S TRWAC-4HANDLE THKAC HKAC-UJ HKAC-LJ
THKAC
Description Capacity #4 - includes handle Roper Whitney 2" x 2" x 1/4" Thick Replacement Blade - Base Roper Whitney Roper Whitney Replacement Blade - Shear Roper Whitney Replacement Handle HK Porter Angle Shear 1-1/4" x 1-1/4" x 1/8" Thick HK Porter Upper Replacement Jaw HK Porter Lower Replacement Jaw
22
TOR1.750X _ _ _
Lbs. 70 80 90 100 110 120 130 140 145 150 160 165 170 180 195 230 1-3/4" ID .192 x 20 .207 x 25 .207 x 22-1/2 .218 x 26 .225 x 27-1/2 .234 x 30 .234 x 28 .243 x 31-1/2 .250 X 35 .250 x 33 .262 x 39-1/2 .262 x 38 .262 x 37 .262 x 35 .273 x 39 .289 x 45 Color Orange Yellow Yellow White Red Brown Brown Green Gold Gold Blue Blue Blue Blue Orange Yellow Cycles in 1,000's 15 21 12 14 14 15 10 12 16 12 18 15 13 10 11 13
Custom sizes and uncut lengths available upon special order.
Product Information
Options
Manufactured from oil tempered spring wire meeting ASTM A229. All Sizes available left or right wound. Stenciled for easy identication. Coated wire for improved corrosion resistance and easier handling. Calculated for a minimum of 10,000 cycles at 7.6 turns.
23
Product Information
Manufactured from oil tempered spring wire meeting ASTM A229. All Sizes available left or right wound. Stenciled for easy identication. Coated wire for improved corrosion resistance and easier handling. Calculated for a minimum of 10,000 cycles at 7.6 turns.
Options
TSRB-RED
TSRB-BLUE
TSRB-YELLOW
24
Color Orange Yellow Yellow Yellow White White Red Brown Green Gold Blue Blue Blue Orange Orange Lt. Blue Lt. Blue Yellow
Product Information
Springs designed for a minimum of 10,000 cycles on an 8 high door can also be used as High Cycle springs on 7 high doors. When these springs are used on a 7 high door with less turns and lifting less door weight, the cycle life is greatly extended.
Safety Collar
Torsion spring safety warning collar - Orange Part# SAFETYCOLLAR
25
Cycles in 1,000's 35 40 22 14 17 12 11 12 12 16 21 16 11 16 12 16 13 13
Color Orange Yellow Yellow Yellow White White Red Brown Green Gold Blue Blue Blue Orange Orange Lt. Blue Lt. Blue Yellow
www.fehr.com
26
Extension Springs
Extension Springs
for 7 Foot High Doors (25"-42")
Loop End
Clip End
Extension Springs
Product Information
All springs rated in excess of 25,000 cycles. Dipped black nish. (25x42) rst number is spring length in inches, second number equals stretch. An extension spring will stretch 1/2 the door height. Spring colors conform to ofcial DASMA colors.
27
Sheaves
Sheaves and Accessories
Part# SHV3HD/DP SHV3HDKIT SHV3FORK/DP SHV4/DP SHV4KIT SHV4FORK/DP SHV4STUD/DP SHV5STUD SHV5 Description 3" Heavy Duty Sheave 3" Heavy Duty Sheave Kit 3" Sheave Fork 4" Sheave 4" Sheave Kit 4" Sheave Fork 4" Stud Sheave 5" Stud Sheave 5" Sheave with Fork Pcs/Ctn 24 24 24 10 10 10 10 5 5
SHV5
Product Information
SHV4FORK
Fully riveted sheaves. Sheave Kits include sheaves, forks and fasteners.
SHV5STUD
SHV3FORK
SHV3HD
SHV4STUD
SHV4
Description 5/16" x 3-1/2" Open Eyebolt 5/16" x 2-1/4" U-Bolt 1/4" x 2-1/4" S Hooks
UB312X02
EGSH250X2.1
E/B312X03
28
Cable Drums
Cable Diameter 1/8" 1/8" 3/16" 1/8" 3/16" 3/16"
Descriptions Standard Lift Residential Drum * Standard Lift Light Duty Commercial Standard Lift Medium Duty Commercial Hi-Lift Light Duty 54" Hi-Lift Medium Duty 54" Hi-Lift Medium Duty 120"
Maximums Door Door Height Wt(lbs) 8'1" 530 12'1" 750 18'1" 1000 120" + Hi-Lift 550 180" + Hi-Lift 1000 144" + Hi-Lift 1000
Standard Lift
Standard Lift Residential Product * CON400-8 use with tubular shaft only. Drums for Information
Hi-Lift
Spring Fittings
Spring ID Max. Wire Size 1-3/4" .295 2" .3065 2-5/8" .331 1/2" X 24" Tapered Winding Bar 1/2" X 18" Tapered Winding Bar
Shaft Coupler
Description Coupler for 1" Keyed Shafts Coupler for 1" Tubular Shafts
TTCOUPLER
29
Bearing Plates
Bearing Plates
Part# ENDPLTE/DP EBFPLTE/DP CENTRPLTE/DP SPRGPLTE/DP NOTCHPLTE/DP USA-SPRGPLTE/DP RESI-SPRGPLTE/DP Description End Bearing Plate 6-5/8" Tall End Bearing Plate w/Flange 3-3/8" Offset Center Bearing Plate 3-3/8" Offset Spring Anchor Plate 3-3/8" Offset Notched Spring Anchor Plate 3-3/8" Offset Universal USA Spring Anchor Plate 8 Ga. Mini-Resi-USA Spring Anchor Plate 12 Ga. Pcs/Ctn 24 24 pair 24 24 24 12 pair 50
End Bearing Plate w/Flange Spring Anchor Plate Center Bearing Plate Mini-USA Bracket
Notched Plate
Bearings
Part# BEAR18/DP BEAR23/DP BEAR32/DP
USA Bracket
Description Nylon Insert for Center Support 1x2x2-1/8 Heavy Duty Bearing 1x2x2-1/8 1" Bearing Assy w/ 2 Holes 3-3/8" on Center
Pcs/Ctn 50 24 24
BEAR18
BEAR23
BEAR32
30
Decorator Angles
Part# UNIDEC Description Decorator Angles
UNIDEC
12 Gauge
Jamb Brackets
Pcs/Ctn 10 10 10 10 10 10
B620
Spring Bumpers
B610
Description Mini Spring Bumper Spring Loaded Push Down Bumper Leaf Type Spring Bumper
B630
Chain Hoists
Part# CH88
CH88
CH84
Description Chain Hoist, Wall Mount, 4:1 ratio 26' of hand chain, 36" of #41 roller chain Chain Hoist, Shaft Mount, 4:1 ratio 26' of hand chain, 22" of #41 roller chain
CH84
31
www.fehr.com
Cable
Galvanized Aircraft Cable
Part# 2G7062 2G7093 2G7125 2G9093 2G9125 2G9156 2G9187 2G9250 Diameter 1/16" 3/32" 1/8" 3/32" 1/8" 5/32" 3/16" 1/4" Type 7x7 7x7 7x7 7 x 19 7 x 19 7 x 19 7 x 19 7 x 19 Breaking Strength (lbs) 480 920 1,700 1,050 2,000 2,800 4,200 7,000
7x7
Type 304
Part# 2S7062 2S7093 2S7187 2S9125 2S9187 2S9250 Diameter 1/16" 3/32" 3/16" 1/8" 3/16" 1/4" Type 7x7 7x7 7x7 7 x 19 7 x 19 7 x 19
7 x 19
Options
Some sizes also available in Type 316 Stainless Steel. Test Certificates available upon request. Refer to Warnings and Cautions on page IV. Not suitable for use on Aircraft.
Product Information
CORRECT
INCORRECT
33
Cable Accessories
ADJ
Thimbles
Part# TAN093X100 TAN156X100 TAN187X100 TAN250X100
AN Type
Size 3/32"-1/8" 5/32" 3/16" 1/4"
CC1
Cable Accessories
Part# ADJX100 CC1X100 SPOOL250X100 SPOOL312X100 SPOOL437X100
SPOOL
Description Cable Adjustment Clips CC-1 Cable Clips Cable Spools 1/4" Cable Spools 5/16" Beveled Cable Spools 7/16"
Malleable
Min.# Clips Required 3 3 3 3 Pcs/Pack 100 100 100 100
Safety Alert
Apply wire rope clips correctly. U-bolt should be on end of rope. Re-tighten clips after initial load. Refer to chart for minimum number of clips required for each size.
Cable Puller
Part# CP1613-30 Description Cable Puller - Parallel Jaw
Lightweight economical Grip for wire from .08" to .20". Single "V" Groove. Jaw length is 3 inches. Maximum Safe load is 1,500 pounds.
CP1613-30
34
Cable Fittings
Sleeves & Stops
Cable Size 1/16" 3/32" 1/8" 5/32" 3/16" 1/4" Cable Size 1/16" 3/32" 1/8" 5/32" 3/16" 1/4" Part Number ASL062 ASL093 ASL125 ASL156 ASL187 ASL250 Part Number AST062 AST093 AST125 AST156 AST187 AST250 Pcs/Pack 100 & 1000 100 & 1000 100 & 1000 100 & 1000 100 & 1000 100 & 1000
Sleeves
Stops
Safety Alert
Sleeves, when properly applied, are capable of holding the rated breaking strength of the cable. Stops are capable of holding one-third to one-half of the rated breaking strength of the cable.
www.fehr.com
Swaging Kit
Multi-Cavity Swaging Tool. Go/No-Go Gauge. Metal Carrying Case. Cable Cutting Tool.
100 & 1000 100 & 1000 100 & 1000 100 & 1000 100 & 1000 100 & 1000
Order online
Aluminum Sleeves: 1/16", 3/32", 1/8", 5/32", 3/16" in 100 pc bags. Aluminum Button Stops: 3/32", 1/8" in 100 pc bags.
Code 1SCKIT
Safety Alert
Follow swaging instructions provided with tools. Check fitting compression with Go/No-Go Gauge. Adjust tool for proper compression.
35
Tools
Swaging Tools
Part # THSC600 THSC600B 1SC 1BSC L-250 TGA-1P TGA-2P 1SCKIT Description Capacity 5 Cavity Hand Swager 1/16" - 3/16" 5 Cavity Bench Swager 1/16" - 3/16" 5 Cavity Hand Swager 1/16" - 3/16" 5 Cavity Bench Swager 1/16" - 3/16" 1 Cavity Hand Swager 1/4" Go/No-Go Gauge for 1SC and 1BC Tools Go/No-Go Gauge for L250 Tool Sturdy Metal Carrying Case complete with Multi-Cavity Hand Swager and Cable Cutting tool, Aluminum Sleeves: 1/16", 3/32", 1/8", 5/32", 3/16" in 100 pc bags and Aluminum Stops: 3/32", 1/8"
Follow swaging instructions provided with tools. Check fitting compression with Go/No-Go Gauge Adjust tool for proper compression..
Hand-Held Model
Bench Model
* See note
Safety Alert
Felco C-7/RC-8
Cable Cutters
Part# TFC7 TFC9 TRC8 TRC450 Model Felco C-7 Felco C-9 RC-8 RC-450 Capacity 1/64" - 3/16" 1/8" - 1/4" 1/64" - 3/16" 1/8" - 3/8"
Felco C-9
RC-450
Angle Shear
Part# TRWAC-4 TRWACBLADE-B TRWACBLADE-S TRWAC-4HANDLE THKAC HKAC-UJ HKAC-LJ Description Capacity #4 - with Handle 2" x 2" x 1/4" Thick Roper Whitney Roper Whitney Replacement Blade - Base Roper Whitney Replacement Blade - Shear Roper Whitney Replacement Handle HK Porter Angle Shear 1-1/4" x 1-1/4" x 1/8" Thick HK Porter Upper Replacement Jaw HK Porter Lower Replacement Jaw
TRWAC-4
THKAC
36
Cable Assemblies
Torsion Cable Assemblies
Plain Loop Part# 36601-102 36601-114 36602-102 36602-104 36602-114 36612-102 36612-104 36612-114 36612-126
Size 3/32 x 8 ft. 6 in. 3/32 x 9 ft. 6 in. 1/8 x 8 ft. 6 in. 1/8 x 8 ft. 8 in. 1/8 x 9 ft. 6 in. 1/8 x 8 ft. 6 in. 1/8 x 8 ft. 8 in. 1/8 x 9 ft. 6 in. 1/8 x 10 ft. 6 in.
Product Information
Torsion cables include swaged button stops. Cable assemblies are fuse cut, machine swaged, coiled in pairs and priced per pair. Available with: Thimble Loops, CC-1 Clips or Spool Eyes. 25 Pair minimum order on custom made Cable Assemblies.
w ww.fehr.com
Spool Eye Assembly
Order online
Spool Eye (ins) 1/4 1/4 1/4 5/16 5/16 7/16 7/16 7/16
37
Cable Assemblies
Extension Cable Assemblies
Plain Loop Part# 36001-144 36001-156 36001-168 36002-144 36002-156 36012-144 36012-156 36012-168 36013-144 36013-156 Size 3/32" x 12 ft. 3/32" x 13 ft. 3/32" x 14 ft. 1/8" x 12 ft. 1/8" x 13 ft. 1/8" x 12 ft. 1/8" x 13 ft. 1/8" x 14 ft. 5/32" x 12 ft. 5/32" x 13 ft. Type 7x7 7x7 7x7 7x7 7x7 7 x 19 7 x 19 7 x 19 7 x 19 7 x 19
Product Information
Cable assemblies are fuse cut, machine swaged, coiled in pairs Available with:Thimble Loops, CC-1 Clips or Spool Eyes. 25 Pair minimum order on custom made Cable Assemblies.
Product Information
Includes Cable Adjustment Clips.
Safety Alert
Spring Containment Cables are recommended for all extension spring installations and are required in the State of California.
Cable Assemblies
and restraint cables in galvanized or stainless steel aircraft cable. Cables are electrically fuse cut, machine swaged, coiled singly or in pairs and color-coded. A variety of end fittings are available to meet virtually any configuration.
Contact our experienced representatives today and let Fehr Bros. design a hardware solution to save you time and money.
Lock Bags
Take
advantage
of
convenient
pre-packaged lock kits. Choose from one of our standard packages (see page A11) or describe your own. Any combination of handle, inside mechanism and individual components like guides, discs, strikers and fasteners can be poly-bagged with part numbers and/or logos for that professional appearance.
39
Fasteners
Screws
Description Type AB Sheet Metal Screws Serrated Washer Head ZP Hex Washer Head Lag Screws-ZP Part# C6360 C6045 C6052 C6053 C6055 C6059 C6061 C6322 C6326 C6327 C6329 C6332 Size 1/4 x 3/4 1/4 x 1 5/16 x 1-5/8 5/16 x 1-3/4 5/16 x 2 5/16 x 2-1/2 5/16 x 3 1/4-14 x 3/4 1/4-14 x 1 1/4-20 x 3/4 1/4-20 x 1 5/16-12 x 1 Socket Size 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 Pcs/ Keg 10,000 10,000 4,000 4,000 4,000 3,500 2,500 2,500 2,500 2,500 2,500 5,000 Pcs/ Box 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 1,000 1,000 1,000
Standard Carton quantity is 1000 pcs. unless otherwise noted. Standard Zinc Plated Fasteners are not suitable for use with pressure treated lumber.
Product Information
ZP I.C.B.O. #5045 COLA RR-25039
Anchor Bolts
Part# C1405-100 C1433-100 C1031-100 Size 5/16 X 1-1/2 3/8 X 3 3/8 X 2-1/8 Type Sleeve Sleeve Wedge Packing 100 50 100
C1405 E/B312x03
EGSH250x2.1
Accessories
Part# EGSH125/DP EGSH250X2.1/DP STRUTCLIP/DP UB312X02/DP E/B312X03/DP E/S625X2/DP Description 1/8 x 1 S-Hook 1/4 x 2-1/4 S-Hook Strut Clips 5/16 x 2-1/4 U-Bolt 5/16 x 3-1/2 Open Eyebolt 5/8 x 2 Eye Screws Packing 100 100 100 100 100 100
E/S625X2
UB312X02
STRUTCLIP
40
Fasteners
Bolts
Description Flat Head Carriage Bolts Full Thread ZP Round Head Carriage Bolts Full Thread ZP Slotted Track Bolts Knurled Shank ZP Part# C6072 C6073 C6076 C6078 C6095 C6142 C6146 C6102 C6104 C6112 C6114 C6122 C6128 Size 1/4-20 x 1-3/4 1/4-20 x 1-7/8 1/4-20 x 2-1/4 1/4-20 x 2-1/2 5/16-18 x 3/4 1/4-20 x 5/8 1/4-20 x 1 1/4-20 x 3/4 1/4-20 x 1 5/16-18 x 3/4 5/16-18 x 1 3/8-16 x 3/4 3/8-16 x 1-1/2 Socket Size 7/16 7/16 1/2 1/2 9/16 9/16 Pcs/Keg Pcs/Box 6,000 1,000 6,000 1,000 6,000 1,000 6,000 1,000 8,000 12,500 10,000 15,000 12,000 8,000 7,000 6,000 3,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500
Standard Carton quantity is 1000 pcs. unless otherwise noted. Standard Zinc Plated Fasteners are not suitable for use with pressure treated lumber.
Nuts
Pcs/Keg 20,000 14,000 8,500 20,000 8,000 20,000 12,000 8,500 Pcs/Box 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000
Description Hex Nuts - ZP Hex Kep Lock Nuts - ZP Serrated Flange Nuts - ZP
Socket Size 7/16 1/2 9/16 7/16 1/2 7/16 1/2 9/16
41
Lubricants
Fehr Lubricants
Part# L6970 L6950 L6930 Description Fehr Multi-Purpose Lube, 16 oz. Fehr Multi-Methylene free, 13.5 oz. Fehr Penetrating Oil, 15 oz. Cans/ Case 12 12 12
Product Information
Americas most popular Door & Operator lubricants. Protects against rust and corrosion. Multi-Lube sprays on like a foam and sets up in minutes to a tough, protective grease. Use on track, rollers, cables, pulleys, hinges and other moving parts.
Lubriplate Products
Part# LP-LT LP-AERO Description Low Temperature Grease, 10 oz. Lithium Based Grease, 1-3/4 oz. Pcs/Case 12 24
Special Low Temperature Grease is ideal in cold climates. Lubricates to -60 F. LP Aero recommended for screw drive and chain drive operators.
Product Information
Scrubs
Part# SCRUBS
#1 Choice for Rolling Steel Doors. Non-toxic FDA and USDA approved. SLIPIT Sliding Compound With Silicones is available in aerosol spray or gel compound.
Packed 6 pails per case. Ideal for cleaning dirt and lubricants from doors, tools and hands.
42
T69035
T61352
T61196
Description End Hinge Center Hinge Top Bracket, Assembled Bottom Fixture Heavy Duty Lift Handle Cable Anchor Bracket 1" Bearing Assembly w/ 2 Holes 3-3/8" on Center
T61204
T61401
T69433
Product Information
Black CED plating for superior corrosion resistance. Tight tolerances eliminate excess door noise.
BEAR32
43
ROLL4026
ROLL22
ROLL24
Description 1" Machined Roller 1" Stamped Roller 2" Nylon Roller 2" Steel Roller
Length (ins) Spool Eye (ins) 110 1/4 115 1/4 130 1/4 97 5/16 125 5/16 105 7/16 110 7/16 115 7/16
44
Jackshaft Operators
Residential Models
Part# ZAP815RL-B ZAP815RL-C Model# Residential Model B Residential Model C
Residential
Product Information
Works on doors up to 160 square feet Maximum door weight - 500 pounds Minimum door height - 6.5 feet Includes cover kit
Commercial Models
Chain Release Models
Part# ZAP805-B ZAP805-C ZAP805-D ZAP8042 Model # Super Drive Model B Super Drive Model C Super Drive Model D Driven Pulley 4" Pulley Drive 5" Pulley Drive 6" Pulley Drive Cover Kit Control Three Button Three Button Three Button Max. Cable Drum Diam. 6" 8.75" 10"
Product Information
Works on doors up to 170 square feet Maximum door weight - 775 pounds Minimum door height - 6.5 feet Maximum door height - 25 feet UL 325 approved (commercial models) ZAP Cover
Chain release
46
Jackshaft Operators
Heavy Duty Commercial Models
Cable Release Model
Part# ZAP8815-B ZAP8815-D ZAP8052 Model# HD Super Drive Model B HD Super Drive Model D Driven Pulley 4" Pulley Drive 6" Pulley Drive Cover Kit Control Three Button Three Button Max. Cable Drum Diam. 6" 13"
Product Information
Works on doors up to 350 square feet Maximum door weight - 1600 pounds Minimum door height - 9.5 feet Maximum door height - 40 feet UL 325 approved (commercial models)
ZAP8815
Battery Back Up
Battery Backup for Series 800 & 880 Units Part# ZAP8830
Autolock
Auto Lock System with Cover, Cable & Module Part# ZAP8070
47
Adaptor Module
Adaptor Module for Models 871 & 8070 Part# ZAPRC872
48
Fehr Bros. stocks a wide range of hardware to meet most installation and replacement needs.
is our commitment to you from our headquarters in Saugerties, NY and our service warehouse in San Francisco.
Excellent service
Our pricing puts you ahead of the competition. You will also save the freight on orders of $250 or more
Save SS
www.fehr.com
www.garagedoorsupplies.com
Extension Springs Torsion Springs Cable Cable Assemblies Cable Fittings Drums &Cones Top Brackets Bottom Brackets Tools Zap Operators Weatherseal Perforated Angle Lubricants Fasteners Sheaves Bearing Plates Spring Bumpers Reverse Angle Seal Bottom Seal Quick Close Fixtures Rollers Hinges Operator Reinforcement Brackets Locks & Latches Lift Handles Extension Cords Key Switch & Disconnect Devices Truck Door Parts