Professional Documents
Culture Documents
802.11 dual radios with integrated eight port switch and mesh networking
The AirGuard model 3e527A3 / 3e 527A3MP is an 802.11b/g AP, 802.11a bridge, and an eight port secure Ethernet switch. With DoD-proven security and easy-to-use mesh networking, it is suited for government, military, industrial, mobile, and metropolitan-area wireless infrastructures.The AirGuard 3e 527A3MP is engineered specifically for vehicle operation. The AirGuard 3e527A3 / 3e527A3MP mesh networking capability supports up to 40 nodes. The 400 mW 802.11a bridge has a typical two mile range with an 8 dBi omni-directional antenna. The 3e527A3 / 3e527A3MP can reach ranges of up to a 32 miles under certain conditions. The 200 mW b/g AP offers extended WLAN for up to 255 users. The 3e527A3 / 3e527A3MP provides both wired and wireless security with FIPS 140-2 validated crypto modules. For wireless, it offers 802.11i and other advanced security features, such as 256-bit AES and DoD PKI. The eight-port switch also has encryption and authentication to protect wired connections. The 3e527A3 / 3e527A3MP is rugged and specifically designed for use in harsh operating environments.
Benefits
Extended range (two to 32 miles) High data rates (up to 54 Mbps) FIPS 140-2 validated crypto modules Easy-to-use mesh networking Wired and wireless integration Enhanced security for both wired and wireless networks Dual radios: 802.11b/g for AP and 802.11a for bridging, at speeds of 11 to 54 Mbps Self-configuring, self-healing mesh networking (up to 40 nodes) and 30 second auto-forming Highly secure 256-bit AES encryption based on FIPS 140-2 validated crypto modules, EAP-TLS, AES-CCM, 802.11i, 802.1x, and PKI Rogue AP detection with email notification Integrated eight port switch plus encrypted Ethernet port Access point, gateway and bridge Power-over-Ethernet (PoE) or DC power Configuration file transfers for easy mass FIPS configuration
Features
RF management for variable power control The 3e527A3MP has a 9 to 32 VDC power port designed to accept variable Rugged IP54 / NEMA 3 case for outdoors input voltage with noise and over-voltage 3e TI AirGuard Secure Mesh System conditions typical of vehicle power systems.
Internet
Secure Mesh Network
Satellite
Satellite dish
Satellite dish
Modem
Modem
Secure SDSL Link
SDSL Modem
SDSL Modem
AirGuard 3e527A3 and 3e527A3MP Wireless Mesh Access Point / Bridge / Switch
Ports
10Base-T/100Base Auto Switching One LAN port (for configuration) One WAN Ethernet port / PoE One encrypted Ethernet port or other modem Six Ports In AP mode = WAN ports In Gateway mode = LAN ports Connections for external antennas
Emissions
FCC Class A CE Europe
Wireless Security
AP mode security - Static AES (128, 192, 256-bit) - Static 3DES - DKE / X.509 digitial certificate - FIPS 802.11i - MAC address filtering - Rogue AP detection / reporting - Layer 2 isolation Bridge mode decurity - Static AES (128, 192, 256-bit) - Static 3DES SSL protected web-based configuration User / Role-based ACL - Add / edit / delete users - User password policy End user authentication via LAN Ethernet ports Firewall - DNS proxy - NAT (IP filtering, port filtering, port forwarding, DMZ) DSL Ethernet port - AES 128, 192, 256-bit and 3DES encryption
Wireless Features
Multiple RFs - 802.11a on bridge - 802.11b/g on AP Operating modes - AP / bridge / mesh - Gateway - FIPS mode - IPv6 support WAN Ethernet settings - DHCP client and static IP address - 10 / 100 Mbps full / half duplex - IP aliasing (gateway mode) * LAN settings - 10 / 100 Mbps full / half duplex - DHCP server Mobile IP supported (subnet roaming) Channel number Fixed channel Auto channel selection (optimum channel) Adjustable transmit power Enable / disable broadcast SSID Auto-forming / Auto-healing mesh / bridge / repeater Configuration file transfers Configuration dowloads / uploads Software configuration push accross mesh Load balancing of wireless clients Wireless AP and wireless client activities monitoring - Signal strength - MAC address listing of wireless clients
Sharing Methods
Static IP / Dynamic IP PPPoE
Protocols
TCP / L2TP STP NAT HTTPS EAP DNS SNMP v1, v2, v3 DHCP HTML IPv6
Certifications
FIPS 140-2 validation pending TOE common criteria certification pending
Warranty
1 year
Dimensions
Weight: 5.5 pounds Size: 9.25 in x 8.25 in x 3.00 in
Power Requirements
PoE 25 to 35 watts (depending on options) 9 to 32 VDC with separate power port option
Physical Security
FIPS 140-2 level 2 tamper evident design Rugged enclosure
LEDs
System power WAN (Ethernet 10 / 100 Mbit indicator) WLAN1 (AP RF link is active / transferring data WLAN2 (bridge RF link transferring data / uplink) WLANSS (bridge RF link transferring data / downlink) Mode (root / non-root)
Maximum Users
NAT: 253 clients / Mac filtering: 60 clients
Front
6 Fast Ethernet Ports
Frequency
2400 2483.4 MHz (802.11b/g) 5.180 5.825 MHz (802.11a)
Upgrade Method
Web-based for FIPS
Ground Stud
29000366-002 B