You are on page 1of 1

852-05 YOKOGAWA DENSHIKIKI CO.

, LTD

GYROCOMPASSES - CMZ 700 SERIES


Three types are available. CMZ700 B drives the repeaters directly from the master compass without the control box. CMZ700S has various inputs and outputs with the control box. CMZ700D is for a dual gyrocompass system. Improvement of followup function - The container mass reduced a burden to compass motor (stepping motor) and realized the follow-up speed of 30/s (CMZ500:12/s). This improvement enabled high-speed follow-up for small high-speed turning vessels. Operation by ships battery - Low power consumption realized ships battery drive. If AC adapter is connected, AC mains back-up the system. (AC adapter: Option). Built-in autopilot stand - Master compass and control box of CMZ700S can be installed in autopilot stand. Built-in restart timer - Restart time can be set from 1 to 99 hours. Vibration-proof structure - Vibration-proof and shock-proof mechanism uses universal joint and outer bellows damper in addition to rubber isolator and bellows damper. Back-up by external heading signal - External heading sensor (magnetic compass, GPS compass, etc.) can drive all repeater system. Repeater heading is automatically synchronized from gyro heading to external heading. Auto speed-error correction function (Option for CMZ700 B) The speed-error is corrected automatically based on the ship speed signal from speed sensor and the latitude signal from GPS or other position sensor. In the case of no latitude signal, the latitude value is estimated based on the ship speed and heading.

Master Compass (MKM 022)

<Input Signal> Ships speed (200 P/nm or IEC61162) Latitude (IEC61162) External heading (IEC61162) Buzzer stop (Contact)

<Optional Output Signal> Rate of turn DC 0 to 5V (3 Circuits) Course recorder (heading/Quadrant DC 0 to 5V (1 Circuit) IEC61162 (3 Circuits)

<Power Supply> AC 100/110/115/220/ 230V 50/60Hz 1 DC 24V (No-volt alarm/Back up)

Control Box (MKC 320)

<Optional Signal> Repeater compass (8 Circuits) DC 24V stepper signal (4 Circuits, Max. 1.0A) Running Status (Contact) No-volt alarm (Contact) Gyro fail (Contact) Gyro system fail (Contact)

SPECIFICATION
Accuracy Setting Time Follow-up accuracy Max. follow-up speed Static within 0.25 x (1/cos latitude) Dynamic within 0.75 x (1/cos latitude) Within 5 hours (Operational state is reached in about 2 hours) Within 0.1 or less

CONFIGURATION
Unit System CMZ700 B CMZ700 S CMZ700 D Master Compass MKM 022 MKM 022 MKM 022 X2 Control Box MKC 320 MKC 321 AC Adapter (MKR 027) MKS 066

Max. 30/s Max. permissible roll angle: 40 Max. permissible pitch angle 40 Permissible acceleration 0.5G 0.5s or less Mechanical freedoms

ELECTROMAGNETIC LOG - EML500 SERIES


The EML500 Series Electromagnetic Log conforms to the technical requirements for the performance standard determined by the IMO resolution A478 (VII). In addition, it meets the type approval issued by the Transport Ministry of Japan (Type Approval No. 3795). The length of the cable between the sensor and the master unit (MEU) can be extended to a maximum of 300 meters due to the internal pre-amplifier installed in the sensitive element. A Variety of external interfaces
200PPNM, photo and dry contact, output. Digital - NMEA0183 - Programmable Analog DC Voltage Speed output NMEA018 input for external back up from a GPS The small size of the Master Indicator allows for optimal placement on a bridge, control room or engineering station. Integrated circuits provide greater accuracy and reliability. A variety of options and accessories from Dual Axis Sensors to secondary master/slave displays makes this system variable for any vessel or requirement. Data repeaters are designed to decrease MTBF for units mounted outside in the elements.

Performance Specifications Speed Range:

-4 ~ 20Kts., -5 ~ 25Kts., -7 ~ 35Kts., -8 ~ 40Kts., -10 ~ 50Kts.* & -13 ~ 65Kts.*


* Installation of the Sea Valve for high-speed applications requires different mounting specifications.

Transverse Speed: Distance: Direction of Movement: Measurement Accuracy: Speed: Distance: Gyrocompass stabilized direction: Ambient Temperature: Humidity: Dimensions (mm): Master Unit (Bulkhead Mount) Master Indicator (Bulkhead Mount) Speed Indicator
Available from:

0 ~ 6.5Kts. (Dual Axis) + ~ 9,999.99nm 0 ~ 359 (Dual Axis) 0.15Kts. 49.9Kts. 0.25Kts. 50Kts. 0.05nm/h or 1.0% whichever is greater 2.5 Max -15 ~ 55C Operational 10 to 95% rh 350 H x 250 W x 111.5 D 116 H x 190 W x 90 D 250 diameter x 129.5 D

YOKOGAWA
G Y RO C O M PA S S E S , P I L OT S & L O G S

AGMarine
5711 34th Ave. NW, #201, Gig Harbor, WA 98335-8548 Tel: 253.851.0862 Fax: 253.851.0865 www.agmarine.com

You might also like