Professional Documents
Culture Documents
B.E. (Electronics)
Pattern D11 Effective from Academic Year 2011-12
Prepared by: - Board of Studies in Mechanical Engineering Approved by: - Academic Board, Vishwakarma Institute of Technology, Pune
Signed by,
Chairman BOS
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 1
Content
Sr. No
1 2 3 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 Program Educational Objectives
Title
Page No.
4
Module VII
Course Structure Course Syllabi for courses - Module VII Theory Course EC40106 Embedded System Design EC40107 VLSI Design Elective I EC42115 Wireless Communication EC42116 Artificial Intelligence EC42117 Biomedical Electronics Elective II EC42118 Mobile Computing* EC42119 Advanced Digital Signal Processing** EC42120 CMOS Analog and Digital Design*** Tutorial EC40205 Embedded System Design Elective I EC42209 Wireless Communication EC42210 Artificial Intelligence EC42211 Biomedical Electronics Laboratory EC40302 VLSI Design Laboratory - Elective II EC42307 Mobile Computing* EC42308 Advanced Digital Signal Processing** EC42309 CMOS Analog and Digital Design*** Project and Seminar EC47305 Seminar EC47303 Project Stage-I
5 6
8 10 12 13 15 17 19 20 22 24 26 27 28 29 30 31 32 33 34 35 36
Module VIII
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 2
5 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 7
Department of Electronics Engineering Course Syllabi for courses - Module VIII Theory Course EC41102 Electronic Automation (MD) EC40108 Electronic System Design and Modeling Elective III EC42121 Audio Video Engineering EC42122 Advanced Power Electronics EC42123 Machine Vision Elective IV (Module) EC42124 Telecommunication Network Management * EC42125 Digital Image Processing** EC42126 VLSI System Design*** Tutorial EC41201 Electronic Automation (MD) Tutorial Elective III EC42212 Audio Video Engineering EC42213 Advanced Power Electronics EC42214 Machine Vision Laboratory EC40303 Electronic System Design and Modeling EC42310 Telecommunication Network Management * EC42311 Digital Image Processing** EC42312 VLSI System Design*** Project and Seminar EC47304 Project Stage-II ACADEMIC INFORMATION
37 39 41 43 44 46 48 50 51 53 55 57 58 59 60 61 62 63 64 65 66
* Only for communication Module ** Only for Signal Processing Module *** Only for Microelectronics Module.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 3
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 4
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 36
MODULE - VIII
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 37
Department of Electronics Engineering List of Elective3 Subject No. S6 S6 S6 T4 T4 T4 Subject Name Audio Video Engineering Advanced Power Electronics Machine Vision Audio Video Engineering Advanced Power Electronics Machine Vision Subject Code EC42121 EC42122 EC42123 EC42212 EC42213 EC42214 List of Elective 4 Subject No. S8 S8 S8 P4 P4 P4 Subject Name Telecommunication Network Management * Digital Image Processing** VLSI System Design*** Telecommunication Network Management * Digital Image Processing** VLSI System Design*** Subject Code EC42124 EC42125 EC42126 EC42310 EC42311 EC42312 Teaching Scheme (Hrs. per week) Lecture Tutorial Practical 3 0 0 3 3 0 0 0 0 0 0 0 0 0 0 2 2 2 Credits 3 3 3 1 1 1 Teaching Scheme (Hrs. per week) Lecture Tutorial Practical 3 0 0 3 3 0 0 0 0 0 1 1 1 0 0 0 0 0 Credits 3 3 3 1 1 1
* Only for Communication module ** Only for Signal Processing module *** Only for Microelectronics module
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 38
FF No. : 654
EC 41102::Electronic Automation
Credits: 03 Teaching Scheme: - Theory 3 Hrs/Week Prerequisites: Basics of control system, Op-Amp, and PLC Objectives: To understand - Hierarchy of automation - Automation tools - Controller principles - Mapping with PEO : 1,2,3,6,7,8,9
(6 Hrs)
A. Introduction and Architecture of automation, Types, pyramid of automation, advantages and disadvantages, Advanced functions, Approach to automation, Manual labor, and control levels. B. Industrial Safety legislations and regulations, Safety by design. Unit II Unit Name: Automation Tools (8 Hrs)
A. PLC- Architecture, Justification for use of PLC, Communication networking of PLC, Ladder programming. HMI- Functions, alarming modes, type of display-graphic, trend, group, detail. DCCS-advantages of decentralized control system, architecture, hierarchy, SCADA- Architecture, functions of key elements of SCADA, applications. B. Intelligent sensors in industrial and process automation, MEMS. Communication networking protocols in automation.
(10 Hrs)
A. Control system parameters, on-off, two position, and multi-position controllers, Proportional, Derivative, and Integral controllers, PI, PD, PID controllers, analog representation of composite controller, Stability concepts, Controller tuning, Controller
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 39
Department of Electronics Engineering configurations, Fuzzy controller in control applications- concepts, membership functions, fuzzy inference, defuzzfication methods, Fuzzy controller in automation. B. Interacting and non-interacting PID controller. Unit IV Unit Name: Digital Controllers (8 Hrs)
A. Introduction of digital controllers, Models of A/D and D/A converters, Types of digital controller- recursive, non-recursive, Realization of digital PID controller- digital temperature control system, non-interacting velocity algorithm, digital position control system. B. Study of Model based controller, adaptive controller Unit V Unit Name: Automation Applications (8 Hrs)
A. Building automation system- Building management system, HVAC control, wireless networking, Building control network. Railway signaling- Detection of trains, need of signaling, release of locking, Implementation of railway signaling, PES in railway signaling. High speed rail signaling system, Automotive Electronics- navigation/driver guide system, ECU, vehicle communication standards, safety. B. Networking protocols in BAS and vehicles. Outcome: Students will be able to - Design controller for automation application - Design industrial automation system Text Books 1. C. D. Johnson - Process Control Instrumentation 2. M. Gopal - Digital Control and state variable methods Reference Books 1. Ogata - Modern Control Systems 2. Bela Liptak -Handbook of Process Control
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 40
Prerequisites: Students having basic knowledge of analog & digital electronics Objectives: To understand Important considerations in developing a particular electronic product. Modeling Hardware & software Integration of hardware & software Mapping with PEO : 2,3,6,7,8,9
(8 Hrs)
A. Product development stages & constraints. System specifications. Study of technocommercial feasibility of specifications. Functional requirements, Environmental constraints. Ergonomic & aesthetic design considerations. Thermal management, Enclosure design B. Commercial, industrial & military standards; (8 Hrs) Unit II Hardware Modeling A. Modeling of switching power device, analog device, small signal amplifier, digital device, gates, current swings, charging-discharging constraints, timing issues in hardware circuits, voltage swing analysis, noise consideration while modeling. B. modeling of an op-amp
(8 Hrs)
A. Noise & Interference, noise reduction & interference eliminating methods, grounding & shielding techniques, ground loops; EMI, EMC, ESD concepts. B. Design rules for analog & digital PCBs.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 41
A. Introduction, Considerations, reliability & quality, definition & related terms like MTBF, MTTR etc. availability, maintainability, bath tub curve, assessment of reliability, reliability expression, fail safe & redundancy techniques, concepts of failure analysis, System reliability improvement. B. repairable & non-repairable systems
(8 Hrs)
A. Object oriented design, software design methodology, Design information flow, Entity relationship diagram, Design process considerations, data flow diagram, control flow diagram. Verification techniques, testing at block diagram level, circuit level, selection of components, ICs, cost estimation
B. PCB layout, PCB designing issues & constraints, operating instructions. Case studies. Text Books 1. 2. 3. 4. Henry Ott ,Noise reduction techniques in electronics circuits:, Wiley E. Balguruswamy , Reliability Engineering: Roger S. Pressman, Software Engineering:, McGraw Hill Kim Fowler, Electronics Instrument Design, Oxford
Reference Books 1. Paul Horowitz. Hill , The Art of Electronics:, Cambridge 2. E F.F.Mazda , Electronics Engineers Reference Book, Butterworth Publication
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 42
List of Elective3 Sr. No. 01 02 03 Subject Name Audio Video Engineering Advanced Power Electronics Machine Vision Subject Code EC42121 EC42122 EC42123
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 43
(7 Hrs)
A) High Level modulated TV Transmitter , IF modulated TV Transmitter, Transmitting Antenna, Receiving Yagi Antenna, Block Diagram of Monochrome Receiver, Pattern Generator, Wobbuloscope . B) Basic satellite theory ( Transponder), Cathode Ray Tube.
(9 Hrs)
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 44
Department of Electronics Engineering A) Color fundamentals, Mixing of colors, Color perception, Color Characteristics, Chromaticity diagram, Color TV camera, Frequency Interleaving Principle, Color Bandwidth, Chroma Signal Generation, Color Burst, Simple PAL & PAL-D System, PAL Encoder, PAL Decoder, CTV Receiver Block Diagram, Monochrome and Color Picture Tubes, NTSC, PAL, SECAM systems. B) Chromaticity diagram, SAW filter. Unit IV Unit Name : Digital Television (9 Hrs)
A) Merits of DTV, Digitization formats, Source Coding : Compression of Video Signal (JPEG&MPEG), Scrambling and Conditional Access, Channel Coding, Modulation by Digital Signal, Reception of Digital TV Signal, Digital TV Receiver block diagram, LCD and Plasma Displays, Types of digital TV ( SDTV, EDTV, HDTV), DTH system. B) Closed Circuit Television (CCTV), Cable Television (CATV).
(9 Hrs)
A) A. Principle of MPEG Audio compression, MPEG audio layer III ( MPIII format), MPEG-1 audio encoder & decoder, Methods of Recording and Reproduction : Magnetic Recording, Optical Recording, CD/DVD/MP3 Player, Digital Satellite Radio. B) Construction & working principle of camcorder.
Text Books 1. 2. 1. 2. 3. R.R.Gulathi, Monochrome & color television, New Age International. Herve Benoit, Digital Television, Focal Press. Bernard Grobb & Charles E., Basic TV and Video Systems, McGraw Hill. Ranjan Parekh, Principles of multimedia, Tata Mc-GrawHill R.G. Gupta, Audio Video Systems, Technical Education.
Reference Books
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 45
Prerequisites: Basics of Power devices, Basics of Power Conversion systems, Basics of AC/DC Motors, Fourier series for analytical approach Objectives: To explain the necessity of power factor improvement & techniques. To study the use of converters & inverters for speed control of motors. To study harmonic control techniques in power conversion. To discuss various measurement techniques in power electronics. Mapping with PEO : 1,2,3,6,7,8,9 Unit I 3 Phase AC/DC Converters
(8 Hrs)
A. Operation and Analysis of 3 phase Semi/ Full Converter with R and R-L load, Effect of Source Impedance(Ls) on Single phase converter, Single phase and Three Phase Dual Converters (Ideal and Practical), Control schemes for non circulating type dual converter, Analysis of circulating current type dual converter. B. Calculation of converter output with Ls, Microprocessor based firing scheme for dual Converter converter. Unit II (8 Hrs) 3 Phase Inverters A. 3 Phase Transistorized Voltage Source Inverter(VSI)- 120 and 180 mode of operation and analysis, PWM Inverters- Techniques and comparison, Voltage Control and Harmonic Reduction in inverters, Introduction to Current Source Inverter. B. Space Vector Modulation, Multilevel inverters Unit III PF Improvement and Instrumentation (8 Hrs)
A. Series and Parallel Operation of Power Devices- String Efficiency, Derating, Triggering requirements, Need of equalizing Network. Power Factor Improvement Techniques-PAC, Forced Commutation (SAC, EAC), Sequence Control of Series Connected Converters.Sensing and measurement of Sinusoidal and non-sinusoidal Voltage and Current, Speed, Power Factor etc.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 46
Department of Electronics Engineering B. Protection and Cooling of power switching devices Unit IV DC Motor Drives (8 Hrs)
A. Motor Performance Parameters, 1phase and 3phase converter drives for separatelyexcited and series DC motors for continuous and discontinuous operation, Braking techniques for DC and AC (IM) motors. B. Suitability/ Selection of a drive based on process requirements (Matching of load, Motor, and converter), Brushless dc motor and drive. Unit V AC Motor Drives and Power Quality (8 Hrs)
A. Motor Performance, Speed Control techniques of 1ph/3ph Induction Motor (Stator Voltage, Frequency, V/F, Rotor resistance), Protection Circuit for AC/DC Motor drivesOver/Under voltage and current, Phase failure, Field failure, soft start-stop, Effect of nonsinusoidal supply on motor performance. Power Quality- Types of Power line disturbances, Sources and Measurement of power line disturbances, Preventive Techniques. B. Slip Power Recovery control of Induction motors, Energy Audit Text Books 1. M D Singh & Khanchandani,Power Electronics, Tata McGraw Hill, IInd edition M. H. Rashid, Power Electronics, 3 edition, Pearson Education, 2004 Reference Books 1. Mohan, Undeland & Robbins, Power Electronics, 3 edition, John Wiley, 2003 2. Dubey, Doralda, Joshi & Sinha, Thyristorised Power Controllers, New Age International, 1986 3. P. C. Sen, Thyristor DC Drives, John Wiley, 1981 4. B. K. Bose, Modern Power Electronics & AC Drives, Pearson Education, 2002
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 47
A. Role of machine vision, applications, relation to natural vision, difficulties in machine vision B. basic properties of image Unit II Operations on image A. Point operators, Morphological operators, Neighborhood operators B. Frequency domain filtering Unit III Object Recognition (8 Hrs) (8 Hrs)
A. Knowledge representation, statistical pattern representations, synthetic and neural nets, Recognition as graph matching, optimization technique and fuzzy system, template matching, feature matching, , models for object recognition. B. texture matching
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 48
A. Control strategies, active control model, point distribution models, pattern recognition method, Hidden Markov models. MMSE restoration, least square error restoration, constrained LS restoration, , restoration homomorphism filtering B. restoration by singular value decomposition, restoration by max a posterior estimation Unit V Applications (8 Hrs)
A. Fingerprint matching, Face recognition, medical imaging, motion detection, intelligent B. Iris Recognition, case studies of different applications Text Books 1.Image processing analysis and machine vision, Milan Sonka, Vaclav Hlavac, Roger Boyle, 2nd edition, Thomson Learning 2.Machine Vision, Galbiati, Reference Books 1.IEEE / Elsevier Journal Papers on Machine Vision
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 49
Subject No. S8 S8 S8
Subject Name Telecommunication Network Management * Digital Image Processing** VLSI System Design***
* Only for Communication module ** Only for Signal Processing module *** Only for Microelectronics module
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 50
A. Switching Technologies: circuit switching, Routing for Circuit switched Networks, packet switching, Multirate circuit switching, Frame Relay, Cell Relay. Broad Band Access Technologies: DSL, ADSL, Cable Modems, WLL, Leased Lines, Optical and Wireless. B. Communication media. Unit II Integrated Services Digital Networks (ISDN) (9 Hrs)
A. ISDN Overview, Principles, standards, ISDN Interfaces and functions, Protocol architecture, Internetworking. Signaling System Number7(SS7): SS7 Architecture, Signaling at data link level, link level, Network level, and signaling at connection control part. B. ISDN User part. Unit III Optical Networks (7 Hrs)
A. Introduction, Principles of optical networks, Optical network components, Standards, Optical interface layers, concepts of multiplexing and synchronization. DWDM Networks: Introduction, architecture, Optical packet switching/ Routing.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 51
Department of Electronics Engineering B. Optical routers, switches Unit IV Telecommunication Network Planning (8 Hrs)
A. Introduction , Principles of telecommunication network planning, traffic planning, Tariff planning, congestion control planning. B. congestion control and QOS. Unit V Telecommunication Network Management (8 Hrs)
A. Telecom network operation and maintenance, Traffic management, management of transport network, configuration management, Fault management . B. Network design tools Text Books 1. William Stallings, ISDN and Broadband ISDN with Frame Relay and ATM, Prentice Hall . 2. Network Management: Principles and Practice - Mani Subramanian, Addison Wesley, Pearson Education Asia publication. Reference Books 1. W. Gorlaski, Optical Networking and WDM, TMH 2. Lakshmi Raman, Fundamentals of Telecommunication Network Management, IEEE press, PHI
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 52
A) Elements of visual perception, Image sampling & Quantization, colour fundamentals, colour models, pseudo colour image processing. Basic grey level transformations, histogram processing, enhancement using arithmetic and logic operators, spatial filtering smoothing and sharpening filters. Smoothing and sharpening B) frequency domain filters (6 Hrs)
A) Neighbourhood concepts, adjacency and distance measures, dilation & erosion, opening & closing operations, basic morphological operations such as region filling, thinning, thickening, skeletons, pruning for binary and gray scale images. B) Morphological operations for gray scale images.
Unit III
(8 Hrs)
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 53
Department of Electronics Engineering Image Segmentation A) Detection of discontinuities, edge linking and boundary detection, thresholding, region based segmentation, use of watersheds, image representation- chain codes, boundary descriptors & regional descriptors B) Other segmentation techniques Unit IV Image Transforms (10 Hrs)
B) Multycategory generalization
Unit V Image Processing Applications (8 Hrs)
2. Digital Image Processing, Pratt W.K., John Wiley, 2001 Reference Books
1. Fundamentals of Digital Image Processing, Jain A.K., PHI, 1997 2. Image Processing , Analysis & Machine Vision, Milan Sonka, Thomson Publication
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 54
Prerequisites: knowledge of digital system Objectives: The aim of the course is to provide a clear understanding of the concepts that support two dominant themes in system design viz. decomposition and assembly. To study Decomposition of a System into simpler subsystems: mechanisms and algorithms for breaking a system into simpler interconnected components. To study Memory sub-systems in System Design: different memory technologies, organizations and architecture that have been used in System Design. To learn Transmission of information between components of a system: the problem of interconnect design for reliable and fast communication in a system. To study Interconnection Networks in Systems Mapping with PEO : 2,3,6,7,8,9 Unit I: Decomposition of a system into data and control paths A: (a) Mealy/Moore state machines (b) register-transfer-level descriptions (c) Implementation using a single clock positive-edge-triggered paradigm . B: State Reduction Techniques. Unit II : Decomposition of the control path A: (a) additive decomposition, state machine re-use (b) multiplicative decomposition, control synchronization. B: control deadlocks Unit III : Parallelism and system decomposition ( 8 Hrs ) ( 8 Hrs ) ( 7 Hrs )
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 55
Department of Electronics Engineering A: (a) Pipelines: control-flow and data-flow pipelines. (b) Communication between sub-systems (c) Queuing models of systems and performance modeling. B : Deadlock revisited Unit IV : Memory Sub-systems A: a) Memory architecture b) Shared memory data hazards and consistency, mutual exclusion B: Mutual Exclusion. Unit V : Interconnect Issues A: (a) signal interconnect models: lumped, distributed, transmission-line (b) Delay and crosstalk (c) Signaling (d) Power and clock distribution (e) level-triggered circuits B : Asynchronous System Text Books 1. J. M. Rabaey, Digital Integrated Circuits, A Design Perspective Prentice-Hall India, New Delhi, 1997 Reference Books 1. W. J. Dally, J. W. Poulton, Digital Systems Engineering, Cambridge University Press, 1998 2. H. G. Cragon, Memory Systems and Pipelined Processors, Narosa, 1996 ( 9 Hrs ) ( 8 Hrs )
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 56
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 57
To study TV transmitter, TV studio, DTV, HDTV, DTH, DVD player and DSR Mapping with PEO : 1,2,5,6,7,8
List:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Study of Video signal generation. VIF amplifier response using Wobbuloscope Voltage and Waveform Analysis of Color TV. Video amplifier response testing Sync separator Video Compressing Technique. Design of an Yagi antenna Color spaces Remote control circuit Public address system TV connectors Video bandwidth calculation Concept of IF & its choice Design of a video detector Horizontal output stage Trouble shooting in a TV receiver
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 58
FF No. : 654
Prerequisites: Basics of Power devices, Basics of Power Conversion systems, Basics of AC/DC Motors, Fourier series for analytical approach Objectives: To verify operations of power converter systems for different types of loads To gain hands on experience on different AC / DC motor drives & its protection Systems Use of simulation software for analysis of power systems. Mapping with PEO : 2,3,6,7,8,9 List of Tutorial 1. 2. 3. 4. 5. 6. 7. 8. 9. Text Books 1 2 1 2 M D Singh & Khanchandani,Power Electronics, Tata McGraw Hill, IInd edition M. H. Rashid, Power Electronics, 3 edition, Pearson Education, 2004 Mohan, Undeland & Robbins, Power Electronics, 3 edition, John Wiley, 2003 Dubey, Doralda, Joshi & Sinha, Thyristorised Power Controllers, New Age Study of 3 VSI (180 or 120) Study of Chopper fed / Converter fed DC Drive. Study of speed Control of AC Drive Power factor improvement technique (SAC or EAC or PWM) Study of VVVF 3 phase IM Drive. Sensing and Protection circuits for AC and DC Drives Simulations of 3 phase LCC (HCB or FCB or dual Converter). Simulation of 3 phase VSI (180 or 120) / Simulation of DC/AC drive. Design of one power electronic control circuit.
Reference Books
International, 1986
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 59
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 60
Prerequisites: Students having basic knowledge of analog and digital electronics. Objectives: To understand Important considerations in developing a particular electronic product. Modeling Hardware & software Integration of hardware & software Mapping with PEO : 2,3,6,7,8,9
List of Contents Part A. 1. 2. 3. Part B 4. 5. 6. Part C 7. 8. Part D 9. Modeling of hardware circuit: Analog circuit. Assembling of the circuit & its testing. Analysis of assembled circuit. (AC analysis, DC analysis, Monte Carlo Analysis etc) Modeling of hardware circuit: Digital circuit. Assembling of the circuit & its testing Analysis of assembled circuit. (AC analysis, DC analysis, Monte Carlo Analysis etc) Environmental testing of a circuit. (Temperature effects) Case study. System design, Analysis of its constraints, observations & conclusions. Mini-Project
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 61
Prerequisites: Knowledge of Computer networking, Broad band Technologies, Fiber Optics Objectives: Configuration of various Telecommunication devices Configuration of various Broad Band devices Implementation of Optical Networks Mapping with PEO : 1,2,3,6,7,8,9
List of Practicals 1. Establishing Broad Band connectivity between two or more computers using ADSL Router. 2. To configure the cable modem and establish high speed internet communication using Cable modem 3. To establish high speed data transfer between computers using ISDN connection 4. To establish point to point and point to multi point connections in ISDN. 5. To implement peer to peer networking using Fiber optic Networking 6. To study analyse telecommunication network performance. 7. To study the traffic management and implement congestion control algorithms. 8. To study the SS7 protocol and implement routing algorithms. 9. Course project based on the syllabus. Text Books 1. William Stallings, ISDN and Broadband ISDN with Frame Relay and ATM, Prentice Hall . Reference Books 1. W. Gorlaski, Optical Networking and WDM, TMH 2. Lakshmi Raman, Fundamentals of Telecommunication Network Management, IEEE press, PHI
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 62
List of Practical 1. Study of BMP file format 2. Conversion of 24 bit color image to 8 bit , 4 bit, 1 bit image 3. Image negation, power Law correction 4. Histogram mapping & equalisation, stretching 5. Image smoothing , sharpening 6. Edge detection use of Sobel, Prewitt and Roberts operators 7. Morphological operations on binary images 8. Morphological operations on Gray scale images 9. Pseudo coloring 10. Chain coding 11. Image statistics 12. DCT/IDCT computation 13. Transform application assignment. Text Books
1. Digital Image Processing, Gonzalez, Woods, PHI , 2nd edition
2. Digital Image Processing, Pratt W.K., John Wiley, 2001 Reference Books
1. Fundamentals of Digital Image Processing, Jain A.K., PHI, 1997 2. Image Processing, Analysis & Machine Vision, Milan Sonka, Thomson Publication
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 63
Department of Electronics Engineering FF No: 654 EC42312 ::VLSI SYSTEM DESIGN Objectives: To decompose a System into simpler subsystems To find out data and control path To assemble the decomposed system To design and implement a dual port memory To simulate a wire Mapping with PEO : 2,3,6,7,8,9 List of Practicals 1. Design sequence recognizer for detecting three successive 1s using Moore Machine 2. Design Pipelined adder 3. Design right shift only barrel shifter. 4. Design FIFO. 5. Design sequential binary multiplier 6. Design SRAM with controller 7. Design carry look ahead adder 8. Design a synchronizer circuit when the width of the asynchronous input pulse is greater than the period of the clock 9. Design a synchronizer circuit when the width of the asynchronous input pulse is less than the period of the clock 10. Design UART transmitter ASM chart Text Books 1. Plummer, Deal , Griffin , Introduction to semiconductor fabrication , Prentice Hall publication 2001. ISBN No 0130224049
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 64
2.
3.
4. 5. 6.
7.
Upon completion of this course student will be able to : Apply various aspects of the curriculum which support students increasing mastery of competencies in technicality.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 65
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 66
ACADEMIC INFORMATION
Department of Electronics Engineering A) Mid Semester Examination 1. Students reporting in morning slot will have examination in morning slot. Those in evening slot will have examination in evening slot. 2. 20 multiple choice based questions to be attempted in 30 minutes x no. of theory courses i.e. 100 questions in 150 minutes for F.E., 80 questions in 120 minutes for S.E., T.E.,B.E.,M.E., 20 questions in 30 minutes for Honors, Minor, Fast Track, etc. 3. A scrambled mix of questions will be generated through software. 4. Mid Semester Examination will be based on Unit II & Unit III. 5. There will be one mark for each correct answer and (-) 0.25 marks for every wrong answer. 6. For a typical 3 hour Mid Semester Examination, first 15 minutes would be used for student attendance, record keeping, seat allocation, log in procedure if any, etc. Next 150 minutes for actual examination. A timer indicating time remaining to be provided by ERP. 15 minutes for processing & results. 7. A visual alarm / flash would be given 10 minutes before completion of 150 minutes as a warning. For auto generation of every theory course result out of 20 and dispatch of the marks on student mobile and mail ID as well as parent mail ID. 8. No repeat examination under any circumstances.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 67
B)
Seminar (T.E.- Semester I) 1. Review I: during Mid Semester Examination (Compulsory) as per the Academic Calendar. 2. Review II : The last week of November (Optional) 3. For poor performing students identified by the examination panel, a second review to be taken. Review II optional for other students. For Review II, deduction of 10 marks will take place. 4. Seminar is an individual activity with separate topic and presentation. 5. Duration of presentation 20 minutes Question and answer session 10 minutes
1. Attendance during Semester 2. Attendance during Seminar presentation self & peer 3. Relevance of Seminar topic 4. Timely Abstract submission 5. Literature review 6. Technical contents 7. Presentation 8. Question & answer Session
10 marks 10 marks 10 marks 10 marks 10 marks 10 marks 25 marks 15 marks --------------100 marks =========
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 68
For the courses belonging to 2008 structure counseling sessions for failure students will be arranged. The Head of Department will appoint faculty identified as subject experts as counselors. The previous examination scheme i.e. Class Test 10 marks T.A. through Home assignment 10 marks A written paper MSE 30 marks A written paper ESE 50 marks Will be followed. The entire processing based on 2008 structure related coding scheme will be followed. Counseling + Administration + Examination charges will be the basis for fees considered for such students.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 69
A student planning to take extra credits may be considered under following categories : (a) A student carrying a backlog and re-registering for the previous course Re-registration charges as applicable. Consideration of all courses registered for during that Semester of Academic Year for SPI calculation. (b) Student planning to take extra courses as a fast track opportunity Administration, processing and examination charges will be considered. In any case the student has to pay the college fees for four years. This fast track facility would enable the student to undergo an industrial training, an exchange programme, research contribution in I.I.T. under scheme such as KVPY without any academic compromises for credit transfer. The phasewise development and completion of project activity cannot be considered at an accelerated pace under fast track scheme. The registration under fast track is subject to having a CPI 8.0 or above and no backlog for consideration of registration to an additional course. (c) Students opting for earning extra credits by selection of courses in addition to the courses prescribed by respective BOS which are single Semester activities and not the part of Honors / Minor scheme. Such students will be expected to pay charges equivalent to re-registration (proportionate credit based payment). The registration for such courses is subject to permission given by the Chairman BOS of the Board in the purview of which the subject is identified. Such permissions will be given based on meeting with prerequisite subject. 1. In any case (a), (b) or (c) the candidate cannot register for more than 8 credits. 2. A suitable reflection of completion of the said course will be made in the candidates Grade statement. For part (c) a separate grade & GPA will be calculated. That GPA will not be clubbed with the other regular courses for SPI, CPI calculation.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 70
Week No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Activity No Home Assignments No Home Assignments No Home Assignments S1 / S2 HA1 S3 / S4 / S5* - HA1 S1 / S2 HA2 S3 / S4 / S5* - HA2 S1 / S2 HA3 S3 / S4 / S5* - HA3 S1 / S2 HA4 S3 / S4 / S5* - HA4 S1 / S2 HA5 S3 / S4 / S5* - HA5 No Home Assignments No Home Assignments No Home Assignments
The Home Assignments will be based on the self study component i.e. part B of every theory course syllabus. The Saturday or last working day will be the default deadline for submission of Home Assignment of that week. For example by the Saturday ending Week No. 9, Home Assignment No. 3 for subject S3/ S4/ S5 (if applicable) must be submitted. 1. *S5 can be OE1 / OE2 / OE3 / Honors/ Minor / Re-registration category (a) / Category (b) / Category (c). 2. For subjects S1, S2, S3, S4 & S5 (if any), the composition of the Teacher Assessment marks will be as follows :
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 71
Department of Electronics Engineering S1,S2 with Tutorial Home Assignment Tutorial Test Attendance : (a) > 90% (b) 75% to 90% (c) <75% 10 marks 5 marks 0 marks 15 marks 10 marks 5 marks 0 marks marks 30 marks 30 marks 30 marks 30 marks S3,S4,S5 without Tutorial 30 marks
Explanation : 1. Tutorials to be conducted with continuous assessment throughout the Semester. Final assessment out of 30 marks for Tutorial. 2. Class Test to be conducted during a regular theory class within the time period mentioned in the Academic Calendar. 3. Class Test marks are to be entered immediately as mentioned in Academic Calendar. 4. Attendance percentage to be calculated at the end of Semester after completing all lectures as per the lesson plan.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 72
Department of Electronics Engineering F) Mini Project Teaching Scheme: Theory 0 ; Tutorial 0 ; Laboratory 2 Hrs / week For F.E., S.E. & T.E. students in every Semester a Mini Project be carried out. The objectives behind the Mini Project are: 1. Scope for creativity 2. Hands on experience 3. Academic occupancy
Mini Project will be based on all subjects of that Semester except GP. 1. The Semester Mini Project will be for a group of 3 to 5 students. Head of Department to appoint Mini Project Guides. 1 credit will be awarded to the candidate after the viva voce and project demonstration at the End of Semester. 2. Group formation, discussion with faculty advisor, formation of the Semester Mini Project statement, resource requirement, if any should be carried out in the earlier part of the Semester. The students are expected to utilize the laboratory resources before or after their contact hours as per the prescribed module. The Assessment Scheme will be: (a) Continuous Assessment (b) End Semester 50 marks 50 marks --------------100 marks ==========
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 73
G)
The project activity is broken in 3 stages: The Project Stage I will be in T.E Semester II irrespective of student module. The evaluation of Project Stage I will be as follows: Group formation & attendance / reporting to guide Topic finalization / Statement Literature Survey Abstract Presentation 20 marks 20 marks 20 marks 20 marks 20 marks
Project Stage II and Project Stage III evaluations will be based on Department specific norms.
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 74
Note :
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 75
Structure & Syllabus of B.E. (Electronics) Program Pattern A11, Issue No.3, Rev No.1 dated 2/4/2011 76