Professional Documents
Culture Documents
Page 1 of 2
b. In the series resonant circuit shown in Figure 6, R = 93.6 , L = 14.9 mH, and C = 17 nF. Determine the resonant frequency, the quality factor, the bandwidth, and the voltage drop at resonance on each of the three passive elements in phasor form, and in time-domain representation. Question 5 a. For the filter shown in Figure 7, R = 120 , L = 1.91 mH. What is the type of the filter? Determine the cutoff frequency fc of the filter, and sketch semi-log scale the phase angle by which Vo leads Vi versus frequency at 0.1fc, 0.5 fc, fc, 2fc, 5fc, and 10 fc. b. For the air-core transformer shown in Figure 8, the coupling coefficient k = 1. Find the value of Ls if the mutual inductance M = 80 mH. Find the induced voltages ep and es if the flux linking the primary coil changes at the rate of 0.8 Wb/s. Find the induced voltages ep and es if the primary current changes at the rate of 0.2 A/ms. c. A balanced three-phase -connected load is connected to a balanced three-phase three-wire Y-connected generator having a phase voltage of 220 V. If the total power delivered to the load is 4800 W at 0.8 power factor lagging. Determine the magnitude of the line voltage, the magnitude of the line current, the magnitude of the phase current of the load, and the phase impedance of the load. Question 6 a. Find the Z parameters of the two-port network shown in Figure 9. b. Find the transmission parameters of the network shown in Figure 10 by considering the circuit to be a cascade interconnection of three two-port networks, each containing one passive element.
Page 2 of 2
Figure 1
Figure 2
Figure 3 F
Figure 4
Figure 5 F
Figure 6 F
Figure 7 F
Figure 8 F
Figure 9
0 Figure 10