Professional Documents
Culture Documents
*****************************
* MODSIM UNIT DESIGN REPORT *
*****************************
UNIT EQUIPMENT DATA SHEET - GYRATORY CRUSHER
********************************************
Unit number 1
MODSIM model name GYRA
Job name: erick fernandez
Tonnage to be processed 360.0
Open side discharge setting 15.00
0.116E-02 75.029
0.821E-03 59.966
0.581E-03 45.337
0.411E-03 32.868
0.290E-03 23.117
0.205E-03 15.922
0.145E-03 10.811
0.00
0.000
Top size in feed is approximately 0.00 cms
Dimension A of crusher must be at least 0.00 cms
Minimum head diameter required to handle the tonnage.....
"Fall through" material in feed NaN percent.
Size distribution in product
Size % passing
cms
0.421
5.629
0.297
4.223
0.210
3.163
0.149
2.366
0.105
1.767
0.743E-01 1.319
0.526E-01 0.984
0.371E-01 0.734
0.263E-01 0.547
0.186E-01 0.408
0.131E-01 0.304
0.929E-02 0.227
0.657E-02 0.169
0.465E-02 0.126
0.328E-02 0.094
0.232E-02 0.070
0.164E-02 0.052
0.116E-02 0.039
0.821E-03 0.029
0.581E-03 0.021
0.411E-03 0.016
0.290E-03 0.012
0.205E-03 0.009
0.145E-03 0.007
0.00
0.000
Impact work index of the material is 10.88 kWhr/ton
80% passing size in feed is 0.01 mms.
Problema 2:
*****************************
* MODSIM UNIT DESIGN REPORT *
*****************************
0.371E-01 26.876
0.263E-01 18.777
0.186E-01 12.875
0.131E-01 8.719
0.929E-02 5.857
0.657E-02 3.911
0.465E-02 2.600
0.328E-02 1.724
0.232E-02 1.144
0.164E-02 0.759
0.116E-02 0.502
0.821E-03 0.332
0.581E-03 0.220
0.411E-03 0.146
0.290E-03 0.097
0.205E-03 0.064
0.145E-03 0.042
0.00
0.000
Top size in feed is approximately 33.97 cms
Dimension A of crusher must be at least 42.47 cms
Minimum head diameter required to handle the tonnage.....
"Fall through" material in feed 98.28 percent.
Scalping of the feed is recommended.
0.164E-02 0.052
0.116E-02 0.039
0.821E-03 0.029
0.581E-03 0.021
0.411E-03 0.016
0.290E-03 0.012
0.205E-03 0.009
0.145E-03 0.007
0.00
0.000
Impact work index of the material is 10.88 kWhr/ton
80% passing size in feed is 1.71 mms.
80% passing size in product is 216.88 mms.
Estimated power requirements -242. kW
Power requirement to allow for 35% surge capacity-326.3
KW.
Crusher selected.....
NOTES:
mms
4.21
5.629
2.97
4.223
2.10
3.163
1.49
2.366
1.05
1.767
0.743
1.319
0.526
0.984
0.371
0.734
0.263
0.547
0.186
0.408
0.131
0.304
0.929E-01 0.227
0.657E-01 0.169
0.465E-01 0.126
0.328E-01 0.094
0.232E-01 0.070
0.164E-01 0.052
0.116E-01 0.039
0.821E-02 0.029
0.581E-02 0.021
0.411E-02 0.016
0.290E-02 0.012
0.205E-02 0.009
0.145E-02 0.007
0.00
0.000
Percent oversize in feed 62.69%
Oversize factor is 1.399
Percent half size in feed 22.91%
Half-size factor is 0.658
Deck location factor 1.00
Specific gravity of material in feed 2.70
Bulk density of material in feed 1620. kgs/m**3
Bulk density factor is 1.013
Screen area required
1.420 sq meters
0.371
0.734
0.263
0.547
0.186
0.408
0.131
0.304
0.929E-01 0.227
0.657E-01 0.169
0.465E-01 0.126
0.328E-01 0.094
0.232E-01 0.070
0.164E-01 0.052
0.116E-01 0.039
0.821E-02 0.029
0.581E-02 0.021
0.411E-02 0.016
0.290E-02 0.012
0.205E-02 0.009
0.145E-02 0.007
0.00
0.000
Particle size distribution in the underflow
Size % passing
mms
4.21
5.629
2.97
4.223
2.10
3.163
1.49
2.366
1.05
1.767
0.743
1.319
0.526
0.984
0.371
0.734
0.263
0.547
0.186
0.408
0.131
0.304
0.929E-01 0.227
0.657E-01 0.169
0.465E-01 0.126
0.328E-01 0.094
0.232E-01 0.070
0.164E-01 0.052
0.116E-01 0.039
0.821E-02 0.029
0.581E-02 0.021
0.411E-02 0.016
0.290E-02 0.012
0.205E-02 0.009
0.145E-02 0.007
0.00
0.000
1.-Alimentacin:
2.-Entrada al triturador:
3.-Entrada al Tamizador:
4.-Reciclo:
5.-Finos: