Professional Documents
Culture Documents
20
About FSDiscover!
FSDiscover! is a Flight Simulator sightseeing guide, a navigation tool and a simple flight planner in one single product. It runs as a module inside Flight Simulator and can be used without leaving FS. FSDiscover! offers an easy to use map where you can see airports, points of interest and geographic features and plan your sightseeing flights. It can also display this information directly in the 3D view while you are flying without cluttering your view. You can create simple flight plans and either follow them yourself, or let the autopilot fly the plane along the flight plan. Included are over 1900 points of interest for FSX and 600 points of interest for FS2004, representing all "Easter eggs" and unique landmark buildings included in these simulators. Also included are over 3.6 million geographic names from all over the world. A built-in editor allows you to easily add your own points of interest that you can share with other FSDiscover! users. FSDiscover! supports Flight Simulator X and Flight Simulator 2004.
FSDiscover!
Page 2 of 10
The map allows you to see points of interest, airports and geographic names. Points of interest are interesting places to visit that actually exist in the FS world. The POI files supplied with FSDiscover! contain all landmark buildings and Easter eggs from FSX and FS9 default sceneries. Geographic names come from the GNIS database and do not necessarily correspond to features in the Flight Simulator scenery. Airports are imported from scenery files. To display the map, use the Open FSDiscover! menu item. You can also define a hot key for the map in the Options dialog box and use that hot key. By default, there is no hot key defined. You can use the map to explore the Flight Simulator world for interesting places to visit, to create and edit FSDiscover! flight plans and to set the aircraft position. Flight Simulator is paused while the map is displayed. Moving the mouse with no buttons depressed over airports, points of interest and geographic features displays details about the feature under the mouse cursor in a small pop-up. The left mouse button is context-dependent. When depressed near the flight plan, it allows you to add, move or remove waypoints. Otherwise, dragging the mouse with the left button depressed moves the map around. Without dragging, pressing and releasing the left mouse button displays the context menu. The mouse wheel allows you to navigate around the map. Rotating the mouse wheel changes the zoom factor. Dragging the mouse with the mouse wheel depressed moves the map. The right mouse button always displays the context menu. Use toolbar buttons to control display of airports, points of interest and geographic names. Note that by default, only a small set of geographic names is loaded consisting of capes, craters, lakes and islands. Use the Options dialog to enable geographic name files.
FSDiscover!
Page 3 of 10
Due to the need to reduce the clutter, overlapping names are not shown on the map. If this happens, you can either zoom in to reduce the clutter, or simply move the mouse over symbols to see names in a small pop-up that appears.
To toggle the display of points of interest, airport and geographic features, use toolbar buttons. To set the plane position without creating a flight plan, point to the desired location with the mouse, press the right mouse button and select Reposition the aircraft here from the context menu. The flight Simulator aircraft will be repositioned when you close the FSDiscover! map. If you point to an airport, the aircraft will be positioned on a runway. Otherwise, it will be placed in mid-air. When you point to a geographic feature or a point of interest and reposition the aircraft, the aircraft is placed not at the mouse pointer location, but 1NM in front of it. This ensures the desired location is visible from the cockpit. To set the aircraft position at the mouse pointer location, hold the Control key down when selecting Reposition the aircraft here. To close the map, press the x button on the window title. You can also use the Esc key.
FSDiscover!
Page 4 of 10
To start a new flight plan, or to add a waypoint to the end of the current flight plan, point with the mouse to the desired location on the map and use the context menu. The Add a waypoint menu item appends a waypoint to an already existing flight plan. It is only available when at least one waypoint is already defined. The Start a new flight plan at the nearest airport menu item erases the current flight plan and creates a flight plan segment from the nearest airport to the mouse pointer location. It is not available when the mouse is pointing at an airport. The Start a new flight plan here menu item erases the current flight plan and adds a waypoint at the mouse pointer location. You are not required to start a FSDiscover! flight plan at an airport. To move a waypoint, point on it with the mouse and drag it with the left mouse button depressed. To insert a waypoint, point with the mouse to a flight segment and click the left mouse button. To remove a waypoint, either drag it with the mouse over the previous or the next waypoint, or use the context menu to delete it. To erase, load or save the flight plan, use toolbar buttons. By default, flight plans are saved in the format used by Flight Simulator for its own flight plans. This allows you to save your FSDiscover! flight plan and load it into Flight Simulator, for example, to use in the GPS unit. You can also open Flight Simulator flight plans made by the FS flight planner or any other flight planner for display in FSDiscover!
FSDiscover!
Page 5 of 10
To open the search dialog, use the toolbar button or press Ctrl+F.
To search for a feature, type its name in the search text box. As you type in the feature name, the list of matching names will be displayed in search results (to a maximum of 400 entries). Clicking on list box entries will center the map over the corresponding features. Note that you need to enable their display in the map view and possibly set the appropriate zoom factor prior to searching in order to see them. When searching for an airport, you can also enter the airport ID. To close the search dialog and leave the map centered on the search result, click OK. To close the search dialog and return to the map view to its position prior to starting the search, click Cancel. A flag in the map view marks the location of the feature found during the last search. To remove this flag, either press Esc once, or open the search dialog and click Cancel.
FSDiscover!
Page 6 of 10
You can define and use hot keys to enable/disable individual menu items. By default, the hotkeys Ctrl+Shift+F9 through Ctrl+Shift+F12 are used. To set fonts, colors, hot keys and other options, use the Options dialog box. If labels overlap each other and are unreadable, make sure clutter reduction is enabled in the Options dialog box. The clutter reduction may not work properly if the Flight Simulator window size is significantly smaller than the screen size. In this case, you can temporarily increase the zoom factor in Flight Simulator to read the labels, or maximize the FS window. Sometimes the labels can show through the virtual cockpit. If this disturbs you, use hot keys to disable the labels when not using them to navigate.
Setting options
FSDiscover!
Page 7 of 10
To set options, either open the FSDiscover! map and press the Options button on the toolbar, or use the Options menu item in the FSDiscover! menu. To set a hot key, click in the corresponding edit box and press the hot key sequence on the keyboard. To remove a hot key, press Backspace. To set colors of text labels and of the flight plan display in the 3D view, use the Color combo boxes. This does not affect colors used in the FSDiscover! map. To set maximum distances for text labels, enter corresponding values in text boxes. Text labels for features further away that the distances specified will not be shown. Trigger Show Distance check boxes to display distances next to labels. To set the font size used, use the Font size combo box. The Auto setting makes the font size depend from the distance to the text label, thus labels for features located further away are displayed in a smaller font. Other settings specify a fixed font size for all labels. The actual font sizes used depend on the Flight Simulator version and window size, resolution, the graphics card and possibly other factors. The small font may be unreadable on some displays. For the most readable labels, select Large. The font size and shadow settings only affect labels displayed in the Flight Simulator 3D view and have no effect on the FSDiscover! map. To set the font shadow, use the corresponding check box. Depending on the display used and colors selected, the shadow can increase or decrease the readability of labels. Make a setting that suits you most.
FSDiscover!
Page 8 of 10
To set the options for clutter reduction, use the corresponding combo box. Clutter reduction works by not displaying all labels in Flight Simulator at once, but cycling through them. This reduces the number of labels displayed simultaneously and prevents labels from overlapping each other. The various cycle options enable clutter reduction and determine the cycle time, in seconds. The Static option disables cycling but leaves clutter reduction in force. This results in some labels never displayed. The None option disables the clutter reduction. All labels will be displayed at the same time. Note that the clutter reduction is always disabled when using the point of interest editor, irrespective of the setting in the Options dialog box. The clutter reduction option only affects labels displayed in Flight Simulator, not the FSDiscover! map view. To control the content of airport labels, use the corresponding combo box and check boxes. You can choose between displaying airport names, airport IDs or both. You can also enable the display of airport elevation, bearing and the longest runway. The Keep local time when repositioning setting, when enabled, automatically adjusts the clock when you move the airplane over a large distance using FSDiscover!, so that the local time stays nearly the same. To set the cruising altitude parameter of Flight Simulator flight plans saved by FSDiscover!, enter the value in the corresponding text box. To determine which points of interest and geographic names are loaded, use the corresponding list boxes and place check marks against files you would like to use. Only features from files that are enabled here are displayed on the FSDiscover! map and as labels in the 3D view. When you use FSDiscover! out of the box, you will see only one file with points of interest. Depending on the Flight Simulator version used, it is called either FSX Highlights, or FS2004 Highlights. These files are supplied with FSDiscover! and contain all Easter eggs and unique landmark buildings from these flight simulators. You can create your own files with points of interest and install files created by other FSDiscover! users. The files with geographic names are supplied with FSDiscover! For every kind of feature, there are two files. featurename_us.dat contains all features of this kind in the USA. featurename_world.dat contains all features of this kind outside of the USA. Some files with geographic names are very large (populated_places in particular), can take a longer time to load and consume a lot of memory. Loading all geographic name files consumes about 120MB of memory.
FSDiscover!
Page 9 of 10
Use the slew mode to move the aircraft around. The [_] symbol on the ground in front of the aircraft shows the position where the newly added POI will appear. If you don't see the symbol, either reduce the altitude or press Ctrl+Up several times to increase the POI editor distance. Any changes you make are immediately written to the POI data file. There is no "undo" option. To avoid losing data, back up your data files. To add a point of interest, move the airplane so that the [_] symbol is at the desired location on the ground. Type the POI name directly in the 3D view and press Enter. While typing, you can use the Backspace key to correct typing errors.
To rename a point of interest, move the airplane so that the [_] symbol is in the middle of the POI name shown in the 3D view. The [_] symbol wil disappear and the POI name will be shown in brackets instead. Press Enter once, edit the POI name and press either Enter to apply the new name, or Esc to keep the old one. You can rename points of interest located either in the file you are editing, or the POI files that came with FSDiscover! In the latter case, a replacement point of interest will be added to the file you are editing. Other files will always be left untouched.
To delete a point of interest, move the airplane so that the [_] symbol is in the middle of the POI name shown in the 3D view. The [_] symbol will disappear and the POI name will be shown in brackets instead. Press Delete to delete the POI. You can only delete points of interest located in the file you are editing
FSDiscover!
Page 10 of 10
To change the distance to the [_] symbol, press Ctrl+Up to increase, or Ctrl+Down to decrease the distance. To exit the POI editor, either disable it using the main menu, or press Esc. If a POI name includes a colon, the part of the name preceding the colon only shows in the details pop-up box when you move the mouse over the POI on the FSDiscover! map. For example, San Francisco:Alcatraz would show up simply as Alcatraz in the 3D view and on the
map, but would appear in full length in the details box and in the search results.