Professional Documents
Culture Documents
Washdown Chemical Transfer Potable Water Food Processing Pharmaceuticals & Cosmetics Fueling Fire Protection Dairy Operations Bottling Plants www.hannay.com
Pride in workmanship Reels built to order Consistent quality Service with integrity Value for your dollar
5 6-7 8-9 10-11 12 13-14 15 16-17 18-19 20-21 22-23 24-25 26 27 28-29 30-31 32 33 34-35
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Complete Reel Packages are also available. For further information refer to our form H-0001-Pkg. Hose Assemblies
Allow us to quote the hose along with the reel to simplify your procurement process. Hannay inventories a wide variety of hose assemblies for common applications like general purpose air and water, petroleum products, hydraulics, oxygen/acetylene, breathing air and rescue equipment. Special lengths, fittings and custom application assemblies are usually available in 5 to 10 business days. Beside the ID and Length be sure to know the Temperature Range, Fluid, Working Pressure, and Fitting Specifications for your hose.
Note: All spring rewind reels complete with hose are supplied with appropriate hose stop. (See Ordering & Accessory Guide.)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Paint Notice
To meet the requirements and performance of vehicle and OEM apparatus paints we recommend our reels be painted with the same or equal paint as used on the specific apparatus the reel is being mounted on. Hannay Reels will supply any model or custom reel or part with an automotive primer or rust preventative oil finish upon request, allowing application of final coating at your facility. Or at additional cost Hannay can prime / pre-paint all material before final assembly. In today's regulatory environment this would be the most cost-effective way to meet your finishing standards. Optional finishes are available for various environmental conditions and should be discussed with the factory. Standard finish is oven cured enamel. High performance finishes for demanding and corrosive environments are available at an additional cost. Consult factory for specific requirements.
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
NET 48 22 51 23 63 29 75 34
C N203 N203 N203 N203 8 203 10.5 267 10.5 267 15.5 394
B 3 76
G H
SR (STD)
VR (OPT)
TR (OPT)
Y 10 254 D 12 305
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
Spray Painting
NET 63 29 66 30 87 40 93 42 120 54
A N203 N205 N203 N205 N205 9 229 11 279 9 229 11 279 11 279
C 10.5 267 10.5 267 10.5 267 15.5 394 15.5 394
E 20.75 527 20.75 527 23.75 603 25.25 641 25.25 641
F 11.75 298 13.75 349 11.75 298 13.75 349 14.5 368
H 10.62 270 10.62 270 12.62 321 13.62 346 13.62 346
G H
X A F
SR (STD) VR (OPT) TR (OPT)
Available Roller Positions
Y 10 254 D 12 305
For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to F dim in chart)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
Spray Painting
G H
X A
SR (STD) VR (OPT) TR (OPT)
Y D E
For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to F dim in chart)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
NET 52 24 55 25 63 29 64 29 79 36 94 43 90 41 96 44
A N204 N204 N204 N204 N204 N204 N204 N206 10 254 10 254 10 254 10 254 10 254 10 254 10 254 12 305
C 8 203 10.5 267 8 203 10.5 267 15.5 394 15.5 394 15.5 394 15.5 394
E 17.62 448 18.5 470 18.5 470 20.75 527 23.75 603 23.75 603 25.25 641 25.25 641
F 11.25 286 11.25 286 11.25 286 11.25 286 11.25 286 11.25 286 11.25 286 13.25 337
H 9.12 232 9.12 232 9.12 232 10.62 270 12.62 321 12.62 321 13.62 346 13.62 346
G H
X A
SR (STD) VR (OPT) TR (OPT)
Available Roller Positions
Y 10 254 D 12 305
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
NET 79 36 94 43 90 41 96 44 127 58
A R204 R204 R204 R206 R206 9.25 235 9.25 235 9.25 235 11.25 286 11.25 286
E 24.38 619 24.38 619 26.12 663 26.12 663 29.62 752
F 12.75 324 12.75 324 12.75 324 14.75 375 15.5 394
G 23.88 607 23.88 607 25.88 657 25.88 657 31.38 797
X 4.5 114 4.5 114 4.5 114 6.5 165 6.5 165
G H
X A F
Y D E
SR (STD)
VR (OPT)
TR (OPT)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
NET 75 34 87 39 96 44 102 46
G H
X A
SR (STD) VR (OPT) TR (OPT)
Y 10 254 D 12 305
10
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
SHIP 122 55 131 59 137 62 166 75 172 78 180 82 R206 R204 R206 R308 R308 R308
A 11.25 286 9.25 235 11.25 286 13.25 337 13.25 337 13.25 337
C 10.5 267 10.5 267 10.5 267 10.5 267 10.5 267 15.5 394
E 24.38 619 26.12 663 26.12 663 27 686 30.5 775 30.5 775
F 15.5 394 13.5 343 15.5 394 18.25 464 18.25 464 18.25 464
G 23.88 607 25.88 657 25.88 657 25.88 657 31.38 797 31.38 797
H 12.5 318 13.5 343 13.5 343 13.5 343 17 432 17 432
X 6.5 165 4.5 114 6.5 165 8.5 216 8.5 216 8.5 216
Y 20 508 21.75 552 21.75 552 21.75 552 25.25 641 25.25 641
G H
X A
SR (STD) VR (OPT) TR (OPT)
Y D F E
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
11
S E R I E S
Suction/Discharge
(Consult Factory)
C 10.5 267
G H
X A F
Y D E
SR (STD)
VR (OPT)
TR (OPT)
12
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
AG800
2. Operates in all climates Because the AG series uses air flow to control speed, (and not hydraulic fluid which can change viscosity depending on temperature), the reels rewind speed is controlled and unaffected even by cold weather. 3. Fully adjustable The end user can turn the air restrictor clockwise or counterclockwise until the optimal rewind speed is found for the application. For further information (other than dimensions) on any of the AG series reels listed below, please go to the following pages in this catalog: AG600 AG700 AG800 AG900 Series: Series: Series: Series: Go Go Go Go to to to to page page page page 7 (600 Series) 9 (700 Series) 11 (800 Series) 12 (900 Series)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
13
S E R I E S
Model Number
AG615-23-24-10.5B AG617-25-26-15.5B AG617-25-26-15.5A AG618-30-31-15.5A AG716-19-20-10.5J AG716-23-24-15.5J AG716-25-26-15.5B AG718-25-26-15.5G AG718-30-31-20D AG818-23-24-10.5J AG816-25-26-10.5B AG818-25-26-10.5B AG820-25-26-10.5A AG820-30-31-10.5A AG820-30-31-15.5A AG920-25-26A AG922-30-31A
I.D. (in) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 I.D. (mm) 6 10 13 19 25 32 38 NET SHIP O.D. (in) 5/8 3/4 7/8 1-9/32 1-9/16 1-13/16 2-1/16 O.D. (mm) 16 19 22 33 40 46 52 2/65 2/60 2/30 AG303 117 152 2/20 2/18 2/9 53 69 2/75 2/75 2/50 AG305 118 153 2/23 2/23 2/15 54 69 2/100 2/85 AG305 145 180 2/30 2/26 66 82 2/100 2/50 AG306 155 190 2/30 2/15 70 86 50 50 AG304 101 136 15 15 46 62 65 65 AG304 111 146 20 20 50 66 75 75 AG304 115 150 23 23 52 68 100 100 AG306 121 156 30 30 55 71 150 125 AG306 152 187 46 38 69 85 50 25 AG306 110 145 15 8 50 66 60 35 AG304 121 156 18 11 55 71 70 50 AG306 127 162 21 15 58 73 85 75 AG308 156 191 26 23 71 87 100 AG308 162 197 30 73 89 100 AG308 170 205 30 77 93 50 40 AG308 152 187 15 12 69 85 75 50 AG310 181 216 23 15 82 98
9.25 235 11.25 286 11.25 286 12.25 311 10.25 260 10.25 260 10.25 260 12.25 311 12.25 311 13 331 10.25 260 12.25 311 14.25 362 14.25 362 14.25 362 14.5 362 16.25 413
3 76 5 127 5 127 6 153 4 102 4 102 4 102 6 152 6 152 6 152 4 102 6 152 8 204 8 204 8 204 8 204 10 254
10.5 267 15.5 394 15.5 394 15.5 394 10.5 267 15.5 394 15.5 394 15.5 394 20 508 10.5 267 10.5 267 10.5 267 10.5 267 10.5 267 15.5 394 10.5 267 10.5 267
B
23.25 591 25 635 25 635 28.5 724 18 457 23.25 591 25 635 25 635 28.5 724 23.25 591 25 635 25 635 25 635 28.5 724 28.5 725 25 635 28.5 724
25.25 641 27 686 27 686 30.5 775 20 508 25.25 641 27 686 27 686 30.5 775 25.25 641 27 686 27 686 27 686 30.5 775 30.5 775 27 686 30.5 775
15.75 400 17.75 451 18.50 470 19.50 495 14.75 375 14.75 375 14 356 16 406 16.75 425 16.75 425 14.75 375 16.75 425 19.5 495 19.5 495 19.5 495 24 610 26 660
23.88 607 25.88 657 25.88 657 31.38 797 19.75 502 23.88 607 25.88 657 25.88 657 31.38 797 23.88 607 25.88 657 25.88 657 25.88 657 31.38 797 31.38 797 25.88 657 31.38 797
12.5 318 13.5 343 13.5 343 17 432 10.5 267 12.5 318 13.5 343 13.5 343 17 432 12.5 318 13.5 343 13.5 343 13.5 434 17 432 17 432 13.5 343 17 432
4.5 114 6.5 165 6.5 165 7.5 190 5.5 139 5.5 139 5.5 139 7.5 190 7.5 190 7.5 190 5.5 140 7.5 190 9.5 241 9.5 241 9.5 241 9.5 241 11.5 292
20 508 21.75 552 21.75 552 25.25 641 14.75 375 20 508 21.75 552 21.75 552 25.25 641 20 508 21.75 552 21.75 552 21.75 552 25.25 641 25.25 641 21.75 552 25.25 641
G H
X A F
SR (STD) VR (OPT) TR (OPT)
Y D E
AG800 Shown
14
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
Washdown Air
NET 23 10 24 11 25 11
Notes:
1. Specifications subject to change. 2. Other sizes, from standard components, available on request. 3. Finish: refer to Page 4. 4. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2
B E 14 356
C 6 152
X A F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
15
S E R I E S
NET 27 12 29 13 31 14 33 15 35 16
E CRANK 16.5 419 16.5 419 16.5 419 16.5 419 16.5 419
F CRANK 18.5 470 24.5 622 30.5 775 34.5 876 40.5 1029
F POWER 16.5 419 22.5 572 28.5 724 32.5 826 38.5 978
E
X 9.5 241 15.5 394 21.5 546 25.5 648 31.5 800
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 4. Dimension F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Manual rewind available in RT or LB configuations only. 7. Finish: refer to Page 4. 8. Be sure to check dimensions and weights prior to ordering. 9. Some roller options may prohibit the use of our molded chain guard.
X A F
NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
16
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
Electric Rewind Standard Configuration Shown Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.
NET 28 13 30 14 32 15 33 15 36 16
E CRANK 16.5 419 16.5 419 16.5 419 16.5 419 16.5 419
F CRANK 23.38 594 29.38 746 33.38 848 37.38 950 43.38 1102
F POWER 18.5 470 24.5 622 28.5 724 32.5 826 38.5 978
B C 6 152
X 11.5 292 17.5 445 21.5 546 25.5 648 31.5 800
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 4. Dimension F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Manual rewind available in RT or LB configuations only. 7. Finish: refer to Page 4. 8. Be sure to check dimensions and weights prior to ordering. 9. Some roller options may prohibit the use of our molded chain guard.
X A F
NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
17
S E R I E S
Spray Painting
Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.
NET 32 15 34 15 36 16 37 17 39 18
E CRANK 18.5 470 18.5 470 18.5 470 18.5 470 18.5 470
X 11.5 292 15.5 394 21.5 546 25.5 648 31.5 800
Notes:
1. Specifications subject to change. C 2. Upon request, reels can be supplied with drum lengths other than shown 6 152 and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for G power rewind models, does not apply to FedEx or UPS. 18.12 460 Net (lbs.)/kg Ship (lbs.)/kg H Electric 18/8.2 18/8.2 9.88 251 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). X 4. Dimension F" is the overall length of standard model reels. MX chain drive Y 10 crank models, reels require 2" clearance to remove crank handle. A 254 5. When ordering, prefix model number with: D F 14.5 A = Air Rewind E = Electric Rewind 368 Power Rewind Shown MX = Chain Drive Crank (Air rewind reels are supplied with control valve and 18" air hose; NOTICE: A Flexible Connector must be used between the inlet pipe and 12v and 24v DC rewind reels are supplied with switch and solenoid; the inlet swivel joint. 115v AC rewind reels are not supplied with switch but can be ordered *** x,y indicate mounting holes. See page 2 separately.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. 8. Some roller options may prohibit the use of our molded chain guard. Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com 18
S E R I E S
Spray Painting
Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.
NET 40 15 42 18 44 19
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Finish: refer to Page 4. 4. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2
B
C 8 203
X A F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
19
S E R I E S
I.D. (in) I.D. (mm) O.D. (in) O.D. (mm) 3016-25-26 3020-25-26 3024-25-26 3028-25-26
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Power rewind NOT available on these models. 4. Dimension F is the overall length of standard model reels. Crank rewind models, 31/2" clearance required to remove crank. 5. Subtract 5" from F dimension for disc rewind models. 6. Finish: Call factory for offshore/marine finish, available at extra cost. Refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
C 10.5 267
X A F
20
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
I.D. (in) I.D. (mm) O.D. (in) O.D. (mm) 3516-25-26 3520-25-26 3524-25-26 3528-25-26 3524-30-31 3528-30-31 3534-30-31 3530-33-34
A 13 330 17 432 21 533 25.5 648 21 533 25.5 648 31.5 800 27.5 699
B 7.5 191 11.5 292 15.5 394 20 508 15.5 394 20 508 26 660 22 559
E
E 24.75 629 24.75 629 24.75 629 24.75 629 28.75 730 28.75 730 28.75 730 31.75 806
F 26 660 30 762 34 864 38.5 978 34 864 38.5 978 44.5 1130 40.5 1029
G 27.88 708 27.88 708 27.88 708 27.88 708 29.88 759 29.88 759 29.88 759 32.38 822
B
H 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 16.5 419
X 7.75 197 9 229 13 330 17.5 445 13 330 17.5 445 23.5 597 19.5 495
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Power rewind NOT available on these models. 4. Dimension F is the overall length of standard model reels. Crank rewind models, 31/2" clearance required to remove crank. 5. Subtract 5" from F dimension for disc rewind models. 6. Finish: Call factory for offshore/marine finish, available at extra cost. Refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
G H
C 10.5 267
X A F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
21
S E R I E S
NET 36 16 46 21 57 26 70 32
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 4. Dimension F" is the overall length of standard model reels. Crank rewind reels require 31/2" clearance to remove or install crank handle. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. 8. Some roller options may prohibit the use of our molded chain guard. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2, also for external mounting brackets.
X A F
22
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
Lightweight compact reels designed for long lengths of hose in manual and power rewind. Gear driven crank rewind handle is removable. Chain and sprocket drive powered by electric, hydraulic, or compressed air motor. Gear driven crank rewind, adjustable pinion brake. Standard inlet 90 ball bearing swivel joint 1" female NPT threads. Standard outlet 1" female NPT threads. Optional Rollers: Specify roller position when ordering. Pressures to 2000 psi (138 bar). Temperatures from -60 F to +250 F (-51 C to +121 C). Consult factory for other pressures & temps.
NET 62 28 72 33 83 38 96 44
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 4. Dimension F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
X A F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
23
S E R I E S
Spray Operations
24
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
NET 85 39 102 46 92 42 105 48 120 54 88 40 100 45 113 51 101 46 113 51 121 55 125 57 129 59
SHIP 127 58 144 65 134 61 147 67 162 73 130 59 142 64 155 70 151 68 163 74 171 78 175 79 179 81
A 21 533 29.5 749 21 533 27.5 699 35 889 13 330 19 483 25.5 648 15 381 21 533 25.5 648 27.5 699 25 635
B 15.5 394 24 610 15.5 394 22 559 29.5 749 7.5 191 13.5 343 20 508 9.5 241 15.5 394 20 508 22 559 20 508
B
D 20.5 521 20.5 521 20.5 521 20.5 521 20.5 521 25.5 648 25.5 648 25.5 648 25.5 648 25.5 648 25.5 648 25.5 648 31.5 800
E 18.75 476 18.75 476 22.75 578 22.75 578 22.75 578 24.75 629 24.75 629 24.75 629 28.75 730 28.75 730 28.75 730 28.75 730 31.75 806
F F CRANK POWER 25.38 28.5 645 724 33.88 37 861 940 25.38 28.5 645 724 31.88 35 810 889 39.38 1000 17.38 441 23.38 594 29.88 759 19.38 492 25.38 645 29.88 759 31.88 810 29.62 752 42.5 1080 20.5 521 26.5 673 33 838 22.5 572 28.5 724 33 838 35 889 32.75 832
G 21.5 546 21.5 546 23.5 597 23.5 597 23.5 597 27.88 708 27.88 708 27.88 708 29.88 759 29.88 759 29.88 759 29.88 759 33.62 854
H 12.12 308 12.12 308 12.12 308 12.12 308 12.12 308 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 17.75 451
E
X 13 330 21.5 546 13 330 19.5 495 27 686 7.75 197 11 279 17.5 445 7 178 13 330 17.5 445 19.5 495 17.5 445
Y 16.75 425 16.75 425 16.75 425 16.75 425 16.75 425 21.75 552 21.75 552 21.75 552 21.75 552 21.75 552 21.75 552 21.75 552 27.75 705
Notes:
Specifications subject to change. 1. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 2. Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 1/2 HP 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 4. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 hp) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. Finish: refer to Page 4. 6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 Some applications require a clutch/reduction unit.
C 10.5 267
G H
Y D
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
25
S E R I E S
A 21 533 23 584 13 330 29.5 749 29.5 749 20.5 521 29 737
B 15.5 394 17.5 445 7.5 191 24 610 24 610 15.5 394 24 610
D 20.5 521 20.5 521 25.5 648 25.5 648 25.5 648 31.5 800 31.5 800
B
E 21.88 556 23 584 24.75 629 24.75 629 28.75 730 31.75 806 31.75 806
F F CRANK POWER 29.75 32.12 756 816 31.75 34.12 806 867 21.75 24.12 552 613 38.25 40.62 972 1032 38.25 40.62 972 1032 29.75 32.12 756 816 38.25 40.62 972 1032
G 21.5 546 23.5 597 27.88 708 27.88 708 29.88 759 33.62 854 33.62 854
H 12.12 308 12.12 308 15.5 394 15.5 394 15.5 394 17.75 451 17.75 451
X 13 330 15 381 7.75 197 21.5 546 21.5 546 13 330 21.5 546
E
Y 16.75 425 16.75 425 21.75 552 21.75 552 21.75 552 27.75 705 27.75 705
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Dimensions shown up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 5. When ordering, prefix model number with: A = Air Rewind EP = Electric Rewind MX = Chain Drive Crank HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering.
C 10.5 267
G H
X A F
Y D
NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 Some applications require a clutch/reduction unit.
26
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
A 25.5 648 35 889 17 432 25.5 648 19 483 25.5 648 22.5 572
B 20 508 29.5 749 11.5 292 20 508 13.5 343 20 508 17.5 445
B
D 20.5 521 20.5 521 25.5 648 25.5 648 25.5 648 25.5 648 31.5 800
E 18.75 476 22.75 578 24.75 629 24.75 629 28.75 730 28.75 730 31.75 806
F F CRANK POWER 32 33 813 838 41.5 42.5 1054 1080 23.5 24.5 597 622 32 33 813 838 25.5 26.5 648 673 32 33 813 838 29.25 30.25 743 768
G 21.5 546 23.5 597 27.88 708 27.88 708 29.88 759 29.88 759 33.62 854
H 12.12 308 12.12 308 15.5 394 15.5 394 15.5 394 15.5 394 17.75 451
E
X 17.5 445 27 686 9 229 17.5 445 11 279 17.5 445 15 381
Y 16.75 425 16.75 425 21.75 552 21.75 552 21.75 552 21.75 552 27.75 705
1 Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 5. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 hp) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 Some applications require a clutch/reduction unit.
Notes:
C 10.5 267
G H
Y D
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
27
S E R I E S
Fueling Applications
Refer to: Aviation Catalog H-0418-AVIA Petroleum Catalog H-0417-FD
For use on reels with 39" diameter or larger discs and/or when increased torque and slower rewind speeds are required. Factory-installed when specified or available as an accessory item.
28
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
For Power Rewind See Note 4 8234-26-27 8238-26-27 8246-26-27 8226-33-34 8234-33-34 8238-39-40
SHIP 170 77 195 88 245 112 150 68 230 105 420 191
A 26.25 667 30.25 768 38.25 972 17.75 451 26.25 667 30.25 768
E 25.75 654 25.75 654 25.75 654 31.75 806 31.75 806 39 991
F F CRANK POWER 33.75 34.75 857 883 37.75 38.75 959 984 45.75 46.75 1162 1188 25.25 26.25 641 667 33.75 34.75 857 883 37.75 38.75 959 984
G 26.62 676 26.62 676 26.62 676 33.38 848 33.38 848 39.88 1013
H 13.75 349 13.75 349 13.75 349 17.75 445 17.75 445 20.38 518
X 18.75 476 22.75 578 30.75 781 10.25 260 18.75 476 22.75 578
Y 23.25 591 23.25 591 23.25 591 27.75 705 27.75 705 37 940
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 4. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 HP) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. Finish: refer to Page 4. 6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
B E
C 15.5 393
G H
X A F
Y D
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
29
S E R I E S
For: Suction/Discharge
(consult factory)
Fueling Applications
Refer to: Aviation Catalog H-0418-AVIA Petroleum Catalog H-0417-FD
For use on reels with 39" diameter or larger discs and/or when increased torque and slower rewind speeds are required. Factory-installed when specified or available as an accessory item.
30
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
SHIP 217 98 257 117 372 169 480 218 525 239
A 23.75 603 30.25 768 38.25 972 30.25 768 26.25 667
F F CRANK POWER 33.75 33.25 857 845 40.25 39.75 1022 1010 48.25 47.75 1226 1213 40.25 39.75 1022 1010 36.25 921 35.75 908
G 33.88 861 33.88 861 33.88 861 40.38 1026 46.38 1178
X 16.25 413 22.75 578 30.75 781 22.75 578 18.75 476
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 4. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 HP) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. Finish: refer to Page 4. 6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2
C 20 508
G H
X A F
Y D
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
31
M O D E L S
For: Grounds Maintenance Restaurants/Hotels Washdown Operations Home Use Parts Drawing 1100ISO 48; AT1200-ISO 87
Reel Dimensions inches mm.
NET 47 21 86 39
C 6 152 8 203
D 22 559 23 584
G 39 991 40 1016
1100 AT1200
Notes:
1. Specifications subject to change. 2. Finish: refer to Page 4. 3. Be sure to check dimensions and weights prior to ordering. * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). Some assembly required.
A F
GH 1100 Shown
32
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
M O D E L S
NET 44 20 84 38
C 6 152 8 203
D 22 559 23 584
G 39 991 40 1016
Notes:
1. Specifications subject to change. 2. When ordering specify model number, O.D., length and weight of cable, hose, etc. 3. Finish: refer to Page 4. 4. Be sure to check dimensions and weights prior to ordering. * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). Some assembly required.
G C
A F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
33
S E R I E S
Rope Wire
NET 23 10 25 11 27 12 29 13
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other dimensions. 3. Dimensions reflect pressed frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 5. When ordering power rewind models Prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. *** x,y indicate mounting holes. See page 2
X A F
Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.
34
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
S E R I E S
Rope Wire
Notes:
1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other dimensions. 3. Dimensions reflect pressed frames. 4. Series C3200 requires 3-1/2" clearance to remove crank handle. 5. Subtract 5" from F dimension for disc rewind on C3200 Series. 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. *** x,y indicate mounting holes. See page 2
C 10.5 267
G H
X A F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
35
Cable Reels
Firefighting Reels
Welding Reels
Pumper/Cleaner Reels
Reference Guide
Audio/Video Reels
Family owned and operated since 1933, Hannay Reels is the world leader in both OEM and aftermarket applications. Hannay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications built to last, delivered fast. Additional catalogs are available through your local Hannay Reels dealer or online at www.hannay.com. All Hannay reels are constructed of quality Heavy Gauge Steel (optional Aluminum or Stainless Steel also available on most models.) 553 State Route 143 Westerlo, New York 12193 Toll Free Phone: 1-877-GO-REELS Toll Free Fax: 1-800-REELING E-mail: reels@hannay.com Intl. Phone: 1-518-797-3791 Intl. Fax: 1-518-797-3259
www.hannay.com
BMP 10M 01-11
MADE IN U.S.A.