You are on page 1of 48

EMC Support Matrix

Interoperability Results
P/N 300-000-166
ECO 84075 Rev C28

Table of Contents
Copyright EMC Corporation 2011...................................................................................................................................................................................................1
EMC's Policies and Requirements for EMC Support Matrix........................................................................................................................................................2
Director Bit/Flag Information..........................................................................................................................................................................................................4

Copyright EMC Corporation 2011


Copyright 2001, 2011 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS". EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY
KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

Trademark Information

EMC2, EMC, EMC ControlCenter, AlphaStor, ApplicationXtender, Catalog Solution, Celerra, CentraStar, CLARalert, CLARiiON, ClientPak, Connectrix,
Co-StandbyServer, Dantz, Direct Matrix Architecture, DiskXtender, Documentum, EmailXtender, EmailXtract, HighRoad, Legato, Legato NetWorker,
Navisphere, OpenScale, PowerPath, RepliStor, ResourcePak, Retrospect, Smarts, SnapShotServer, SnapView/IP, SRDF, Symmetrix, TimeFinder, VisualSAN,
VSAM Assist, Xtender, Xtender Solutions, and where information lives are registered trademarks and EMC Developers Program, EMC OnCourse, EMC
Proven, EMC Snap, EMC Storage Administrator, Access Logix, ArchiveXtender, Authentic Problems, Automated Resource Manager, AutoStart, AutoSwap,
AVALONidm, C-Clip, Celerra Replicator, Centera, CLARevent, Codebook Correlation Technology, Common Information Model, CopyCross, CopyPoint,
DatabaseXtender, Direct Matrix, DiskXtender 2000, EDM, E-Lab, EmailXaminer, Enginuity, eRoom, FarPoint, FLARE, FullTime, Global File Virtualization,
Graphic Visualization, InfoMover, Invista, MirrorView, NetWin, NetWorker, OnAlert, Powerlink, PowerSnap, Rainfinity, RecoverPoint, RepliCare, SafeLine, SAN
Advisor, SAN Copy, SAN Manager, SDMS, SnapImage, SnapSure, SnapView, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix DMX,
UltraPoint, Viewlets, VisualSRM, and WebXtender are trademarks of EMC Corporation. All other trademarks used herein are the property of their respective
owners.

Copyright EMC Corporation 2011

EMC's Policies and Requirements for EMC Support Matrix


EMC's Support Matrix Policies and Requirements

This section describes EMC's policies and requirements for the EMC Support Matrix document.

Purpose and Limitations of this Document

This document is being provided for informational purposes only and may change at any time. This version supercedes and replaces all previous versions. The
information is to serve only as a guide for those configurations/products which EMC has qualified. This document identifies and lists various vendor host
systems and integral components that have been tested and qualified by EMC for use with EMC products. Vendor components include, but are not limited to,
host operating systems, HBAs (host bus adapters) and associated drivers, firmware and BIOS; Fibre Channel switches, hubs and bridges. This document also
lists various vendors, cluster software, tape hardware, storage system boot procedures, heterogeneous information storage, and configurations that EMC has
tested and/or qualified for use with EMC products.

The information included in this document is intended as a guide in the configuration of systems for EMC's products. It is not intended to be the sole resource
for system configuration. For more information or answers to questions not found in this document, please see EMC's website, other EMC documentation, such
as EMC's Host Connectivity Guides, EMC Networked Storage Topology Guide, EMC CLARiiON Open Systems Configuration Guide, relevant vendor
documentation, or contact your EMC Sales or EMC Customer Service representative.
For Symmetrix 4.x support, please look at the Symmetrix 8000 Series section and check the footnotes for model/microcode compatibility. EMC employees can
obtain older revisions of ESM containing more Symmetrix 4.x information from the Symmetrix Service Readiness group.
For a complete listing of any known issues with the current support matrix content, please review the ESM Errata on E-Lab Interoperability Navigator. To report
any issues with the content contained within the support matrix, follow the steps documented on the Contacts link on E-Lab Interoperability Navigator. For
E-Lab Interoperability Navigator access through Powerlink:
http://powerlink.emc.com/community/tools/index.jhtml?community_id=2&categoryId=esn_builder&categoryName=E-Lab+Navigator. For access through Avatar:
http://avatar.eng.emc.com/Avatar.asp.

Policies for Qualifying Systems

Policies and procedures for support of EMC products are set forth in the customer's applicable agreements. EMC's publication of information relating to system
configurations covers only those outlined in this document or by approval from EMC Engineering. Other system configurations not found in this document are
not qualified without EMC Engineering approval. EMC has qualified hardware and software provided only by the vendors listed in this document, and host
systems, hardware and software from other vendors are not qualified, and may never be. Please contact your EMC Sales or EMC Customer Service
representative for updates or information not included in this document.

EMC maintains a large collection of the products listed above as well as third-party application software for qualification with EMC's storage systems and to
simulate customer environments, but you must consult the vendors for information about their system internals, such as hardware and associated drivers.

Policy for Future Qualification of Operating System Software Releases

The information in this document is maintained by EMC and EMC strives to update this document with new releases of hardware, operating systems, firmware,
BIOS, switch software, etc., as they become available from the vendors. EMC works with the vendors during their development and release processes in order
to be fully informed at the time the vendors release new versions. EMC does not announce qualification prior to vendors' General Availability. In some cases,
EMC may choose to perform regression testing following the vendors' GA; in these cases and in cases where advance preparation is not possible, EMC may
test and qualify vendors' products as appropriate after they have been released. For early support of such products, including vendor beta participation, contact
your EMC Sales or EMC Customer Service representative.

Policy for End-of-Life Support

EMC strives to continue support for any installed platforms, but may remove support from this host matrix for new installations within three months after the
vendor has announced that this platform has reached the end of life. EMC will continue support for existing installations of hardware, operating systems, and
components that the vendor has officially declared to have reached end of life as long as support is available from the vendor.

Your Selections:
Cluster Software

Microsoft Failover Clustering, Microsoft Windows Compute Cluster Server 2003

Storage Array

EMC Symmetrix

EMC's Policies and Requirements for EMC Support Matrix

EMC's Policies and Requirements for EMC Support Matrix


Relevant Documentation or Links
Symmetrix DMX
Series Product
Information

Symmetrix DMX series continues to deliver innovation and advanced capabilities. It provides highly available, high-performance,
full mainframe support; and flexible connectivity options, including Fibre Channel, FICON, ESCON, Gigabit Ethernet, and iSCSI.
Organizations of all sizes rely on Symmetrix for constant data access, business continuity, and massive consolidation. Available
under Products > Hardware/Platforms > Symmetrix.

Symmetrix V-Max
Series Product
Information

EMC Symmetrix V-Max, the newest series in the Symmetrix family, is a new storage system purpose-built for the virtual data
center.

Host Environment
This is the Support landing page for the Host Environment Analysis Tool (HEAT), an Environmental Analysis Tool. Available
Analysis Tool (HEAT) under Support > Product and Diagnostic Tools > Environment Analysis Tools
Storage Target
Revisions and
Adoption Rates

To ensure stable and reliable environments, EMC recommends target codes for each EMC Storage Operating Environment
(SOE). This report lists the target codes and customer adoption rates for SOEs: Celerra DART, Centera CentraStar,
CLARiiON FLARE, Invista, and Symmetrix Enginuity. Connectrix target codes are included.

EMC Powerlink

Up-to-date technical documents about EMC's products and services, including microcode release notes, product manuals,
software release notes and more. See the "Quicklinks" section of the Powerlink home page.

E-Lab Issue Tracker

Up-to-date information on EMC product issues that could have an impact on your operations. See the "Tools" section of the
Powerlink home page.

EMC's Policies and Requirements for EMC Support Matrix

Director Bit/Flag Information


Operating Environments that only require Base Topologies are not listed. All the Operating Environments listed in the table require the Base Topologies
and the additional settings specified for the Operating Environment. Optional Director Bit Settings include settings for special use or to enable optional
functionality (refer to footnotes for uses). Optional Director Bits may also be used to identify tolerant values when an Operating System is used in a
heterogeneous environment having the same Required Director Bits. In situations that require multiple combinations of director bits on the same port, the
preferred method is to utilize Solutions Enabler where supported to apply settings on an initiator WWN basis.
For FC Loop Base Topology (FC-AL), please enable the EAN (Enable Auto Negotiation) and UWN (Unique WWN) bits.
For FC Switch Base Topology (FC-SW), please enable the EAN (Enable Auto Negotiation), PP (Point-to-Point) and UWN (Unique WWN) bits.
No specific bit is required for iSCSI environment, with the following exception: VCM bit in DMX and ACLX bit in Symmetrix VMAX is required to enable the
iSCSI initiator access login and, optionally, the iSCSI Challenge Handshake Authentication Protocol (CHAP) security configuration.
For Symmetrix DMX volume masking (VCM), please enable the VCM bit. For Symmetrix VMAX volume masking, please enable ACLX bit. For all
Symmetrix arrays, Cluster configurations require the same underlying Operating System director bits noted here in addition to any noted in the Cluster
Software table.

No.
1

Operating System
Asianux AX [32-Bit] 1.0:
GA60, 61, SP162, 63, SP264,
65, SP366, 67;

Topology

Required Director Bit


Setting

FC-AL80

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

FC-AL80

Optional Director Bit


Setting

Storage Operating
Environment

Storage
Array

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

(C) Common Serial Number; (VCM) Enable Fibrepath on


thie Port
(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

FC-AL80

(C) Common Serial Number; (VCM) Enable Fibrepath on


thie Port
(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-AL80;
FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


(UWN) Unique World Wide thie Port
Name

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

FC-SW

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

Asianux AX [AMD64] 1.0:


SP264, 65, SP367;

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

Asianux AX [EM64T] 1.0:


GA62, 63, SP264, 65, SP366,
67;

Comments

Asianux AX [IA64] 1.0 GA68


2

Asianux AX [32-Bit] 1.0:


GA60, 61, SP162, 63, SP264,
65, SP366, 67;
Asianux AX [AMD64] 1.0:
SP264, 65, SP367;
Asianux AX [EM64T] 1.0:
GA62, 63, SP264, 65, SP366,
67;
Asianux AX [IA64] 1.0 GA68

Asianux AX [32-Bit] 1.0:


GA60, 61, SP162, 63, SP264,
65, SP366, 67;
Asianux AX [AMD64] 1.0:
SP264, 65, SP367;
Asianux AX [EM64T] 1.0:
GA62, 63, SP264, 65, SP366,
67;
Asianux AX [IA64] 1.0 GA68

Asianux AX [32-Bit] 1.0:


GA60, 61, SP162, 63, SP264,
65, SP366, 67;
Asianux AX [AMD64] 1.0:
SP264, 65, SP367;
Asianux AX [EM64T] 1.0:
GA62, 63, SP264, 65, SP366,
67;
Asianux AX [IA64] 1.0 GA68

Asianux AX [32-Bit] 1.0:


GA60, 61, SP162, 63, SP264,
65, SP366, 67;
Asianux AX [AMD64] 1.0:
SP264, 65, SP367;
Asianux AX [EM64T] 1.0:
GA62, 63, SP264, 65, SP366,
67;

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

Asianux AX [IA64] 1.0 GA68


6

FC-SW

Director Bit/Flag Information

Director Bit/Flag Information


(C) Common Serial Number; (VCM) Enable Fibrepath on
thie Port
(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


thie Port
(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-AL80;
FC-SW

(C) Common Serial Number; (ACLX) Initiator Group;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 2007
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

Asianux AX [32-Bit] 1.0:


GA60, 61, SP162, 63, SP264,
65, SP366, 67;
Asianux AX [AMD64] 1.0:
SP264, 65, SP367;
Asianux AX [EM64T] 1.0:
GA62, 63, SP264, 65, SP366,
67;
Asianux AX [IA64] 1.0 GA68
7

Asianux AX [32-Bit] 1.0:


GA60, 61, SP162, 63, SP264,
65, SP366, 67;
Asianux AX [AMD64] 1.0:
SP264, 65, SP367;
Asianux AX [EM64T] 1.0:
GA62, 63, SP264, 65, SP366,
67;
Asianux AX [IA64] 1.0 GA68

Asianux AX [32-Bit] 2.0:


GA57, 58, SP151, 52, SP249,
53, SP39, 10;
Asianux AX [32-Bit] 3.0:
SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;
Asianux AX [IA64] 2.0: GA58,
59, SP151, 52;
Asianux AX [IA64]: 3.0 SP147,
3.046, 47;

48,

Asianux AX [x86_64] 2.0:


GA57, 58, SP151, 52, SP249,
50, SP39, 10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
U4 AS/ES30, 32;

31,

Director Bit/Flag Information

Director Bit/Flag Information


Red Hat RHEL [s390-31-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 11 SP183, 111, 9
SP317, 20, 9 SP417;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
1024, 11 SP183, 111, 9 SP317,
19, 9 SP417, 18;
SuSE SLES [s390-31-Bit]: 10
SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
9

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-SW

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;

Director Bit/Flag Information

Director Bit/Flag Information


Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
U4 AS/ES30, 32;

31,

Red Hat RHEL [s390-31-Bit]:


4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110
10

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-SW

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;

Director Bit/Flag Information

Director Bit/Flag Information


Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390-31-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110
11

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-AL80

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;

Director Bit/Flag Information

Director Bit/Flag Information


Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
U4 AS/ES30, 32;

31,

Red Hat RHEL [s390-31-Bit]:


4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 11 SP183, 111, 9
SP317, 20, 9 SP417;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
111, 9 SP317,

1024, 11 SP183,
19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10


SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
12

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-AL80

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;

Director Bit/Flag Information

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (EAN) Enable
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

Director Bit/Flag Information


Asianux AX [32-Bit]: 3.046, 47,
4.0111;

Name

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
U4 AS/ES30, 32;

31,

Red Hat RHEL [s390-31-Bit]:


4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 11 SP183, 111, 9
SP317, 20, 9 SP417;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;

Director Bit/Flag Information

10

Director Bit/Flag Information


SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
111, 9 SP317,

1024, 11 SP183,
19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10


SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
13

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-SW

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
U4 AS/ES30, 32;

31,

Red Hat RHEL [s390-31-Bit]:

Director Bit/Flag Information

11

Director Bit/Flag Information


4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 11 SP183, 111, 9
SP317, 20, 9 SP417;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
111, 9 SP317,

1024, 11 SP183,
19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10


SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
14

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-AL80

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,

Director Bit/Flag Information

12

Director Bit/Flag Information


5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.7 AS/ES, 4.8
AS/ES92, 4.9 AS/ES116, 5.0,
5.1, 5.2, 5.311, 5.490, 5.584,
5.6114, 115, 5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390-31-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 11 SP183, 111, 9
SP317, 20, 9 SP417;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
111, 9 SP317,

1024, 11 SP183,
19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10


SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
15

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,

FC-AL80

Director Bit/Flag Information

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,

EMC
Symmetrix

13

Director Bit/Flag Information


10;

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

Unit Attention; (EAN) Enable


Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance96;
(UWN) Unique World Wide
Name

.55.60, .58.64, .59.64, .60.65,


.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

DMX/DMX-2

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux UEK [x86_64]:
5.6107, 5.7104, 6.0106, 6.1103;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
U4 AS/ES30, 32;

31,

Red Hat RHEL [s390-31-Bit]:


4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,

Director Bit/Flag Information

14

Director Bit/Flag Information


89, 112, 11
SP317, 20,

SP183, 111, 9
9 SP417;

SuSE SLES [IA64]: 10, 10


SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
111, 9 SP317,

1024, 11 SP183,
19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10


SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
16

Asianux AX [32-Bit] 2.0:


SP151, 52, SP249, 53, SP39,
10;

FC-SW

Asianux AX [32-Bit] 3.0:


SP147, 48, SP347, 82;
Asianux AX [32-Bit]: 3.046, 47,
4.0111;

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance96;
(UWN) Unique World Wide
Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

Asianux AX [IA64]: 2.0 SP151,


52, 3.0 SP147, 48, 3.046, 47;
Asianux AX [x86_64] 2.0:
SP151, 52, SP249, 50, SP39,
10;
Asianux AX [x86_64] 3.0:
SP147, 48, SP347, 82;
Asianux AX [x86_64]: 3.046,
47, 4.0111;
Oracle Linux UEK [x86_64]:
5.6107, 5.7104, 6.0106, 6.1103;
Oracle Linux [32-Bit] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [32-Bit]: 5.0, 5.1,
5.2, 5.38, 5.486, 5.585, 5.6109,
5.7102;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585,
5.6109, 5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108;

Director Bit/Flag Information

15

Director Bit/Flag Information


Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390-31-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.0, 5.1, 5.2, 5.311,
5.490, 5.584, 5.6114, 115,
5.7108, 6.081, 6.1110;
SuSE SLES [32-Bit]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 11 SP183, 111, 9
SP317, 20, 9 SP417;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:
SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
1024, 11 SP183, 111, 9 SP317,
19, 9 SP417, 18;
SuSE SLES [s390-31-Bit]: 10
SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22, 10 SP221, 23, 10
SP321, 87, 88, 89, 10 SP421, 88,
89, 112, 113, 11 SP183, 111, 9
SP317, 9 SP417
17

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;

FC-AL80

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

FC-AL80

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port

Red Hat RHEL [32-Bit] 4.0:


AS/ES56, U1 AS/ES55;

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

Red Hat RHEL [IA64] 4.0:


AS/ES, U1 AS/ES;

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,

EMC
Symmetrix

Red Hat RHEL [x86_64] 4.0:


AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217
18

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,

Director Bit/Flag Information

16

Director Bit/Flag Information


[x86_64] 2.0 GA57, 58;

Unit Attention; (EAN) Enable


Auto Negotiation; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

Red Hat RHEL [32-Bit] 4.0:


AS/ES56, U1 AS/ES55;

.91.99, .92.99, .94.102,


.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

DMX-3

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

Red Hat RHEL [IA64] 4.0:


AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:
AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217
19

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

FC-SW

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (UWN)
Unique World Wide Name

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

Red Hat RHEL [32-Bit] 4.0:


AS/ES56, U1 AS/ES55;
Red Hat RHEL [IA64] 4.0:
AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:
AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217
20

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;
Red Hat RHEL [32-Bit] 4.0:
AS/ES56, U1 AS/ES55;
Red Hat RHEL [IA64] 4.0:
AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:
AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217

21

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;
Red Hat RHEL [32-Bit] 4.0:
AS/ES56, U1 AS/ES55;
Red Hat RHEL [IA64] 4.0:
AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:
AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217

22

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;
Red Hat RHEL [32-Bit] 4.0:
AS/ES56, U1 AS/ES55;
Red Hat RHEL [IA64] 4.0:
AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:

Director Bit/Flag Information

17

Director Bit/Flag Information


AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217
23

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-AL80

(C) Common Serial Number; (VCM) Enable Fibrepath on


(D) Disable Queue Reset on thie Port
Unit Attention; (UWN)
Unique World Wide Name

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

FC-AL80;
FC-SW

(C) Common Serial


(ACLX) Initiator Group;
Number12; (D) Disable
(OS2007) Host SCSI
Queue Reset on Unit
Compliance 2007
Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

FC-SW

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

FC-AL80

Red Hat RHEL [32-Bit] 4.0:


AS/ES56, U1 AS/ES55;

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

SuSE SLES [32-Bit] 9: GM17,


SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217
24

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;
Red Hat RHEL [32-Bit] 4.0:
AS/ES56, U1 AS/ES55, U2
AS/ES42;
Red Hat RHEL [IA64] 4.0:
AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:
AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217

25

Asianux AX: [32-Bit] 2.0


GA57, 58, [IA64] 2.0 GA58, 59,
[x86_64] 2.0 GA57, 58;
Red Hat RHEL [32-Bit] 4.0:
AS/ES56, U1 AS/ES55, U2
AS/ES42;
Red Hat RHEL [IA64] 4.0:
AS/ES, U1 AS/ES;
Red Hat RHEL [x86_64] 4.0:
AS/ES, U1 AS/ES;
SuSE SLES [32-Bit] 9: GM17,
SP117, SP217, 21, 54;
SuSE SLES [IA64] 9: SP117,
SP217;
SuSE SLES [x86_64] 9:
SP117, SP217

26

Asianux AX: [32-Bit] 4.0111,


[x86_64] 4.0111;
Oracle Linux [32-Bit]: 5.6109,
5.7102;
Oracle Linux [x86_64]: 5.6109,
5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.311, 5.490, 5.584,
5.6114, 115, 5.7108, 6.081,
6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5

Director Bit/Flag Information

18

Director Bit/Flag Information


AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.311, 5.490, 5.584,
5.6114, 115, 5.7108, 6.081,
6.1110;
SuSE SLES [32-Bit] 10:
SP221, 23, SP321, 87, 88, 89,
SP421, 88, 89, 112;
SuSE SLES [32-Bit]: 11
SP183, 111, 9 SP317, 20, 9
SP417;
SuSE SLES [x86_64] 10:
SP221, 23, SP321, 87, 88, 89,
SP421, 88, 89, 112, 113;
SuSE SLES [x86_64]: 11
SP183, 111, 9 SP317, 9 SP417
27

Asianux AX: [32-Bit] 4.0111,


[x86_64] 4.0111;

FC-AL80;
FC-SW

(ACLX) Initiator Group;


(C) Common Serial
(OS2007) Host SCSI
Number12; (D) Disable
Compliance 200798
Queue Reset on Unit
Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103;
Oracle Linux [32-Bit]: 5.6109,
5.7102;

EMC Enginuity 5875:


.198.148.e, .231.172.e

EMC
Symmetrix
VMAXe

Oracle Linux [x86_64]: 5.6109,


5.7102;
Red Hat RHEL [32-Bit] 4.0:
U2 AS/ES42, U3 AS/ES41, U4
AS/ES40;
Red Hat RHEL [32-Bit]: 4.5
AS/ES33, 4.6 AS/ES34, 4.7
AS/ES35, 4.8 AS/ES92, 4.9
AS/ES116, 5.311, 5.490, 5.584,
5.6114, 115, 5.7108, 6.081,
6.1110;
Red Hat RHEL [IA64] 4.0: U2
AS/ES, U3 AS/ES, U4 AS/ES;
Red Hat RHEL [IA64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116;
Red Hat RHEL [x86_64] 4.0:
U2 AS/ES, U3 AS/ES, U4
AS/ES;
Red Hat RHEL [x86_64]: 4.5
AS/ES, 4.6 AS/ES, 4.7
AS/ES, 4.8 AS/ES92, 4.9
AS/ES116, 5.311, 5.490, 5.584,
5.6114, 115, 5.7108, 6.081,
6.1110;
SuSE SLES [32-Bit] 10:
SP221, 23, SP321, 87, 88, 89,
SP421, 88, 89, 112;
SuSE SLES [32-Bit]: 11
SP183, 111, 9 SP317, 20, 9
SP417;
SuSE SLES [x86_64] 10:
SP221, 23, SP321, 87, 88, 89,
SP421, 88, 89, 112, 113;
SuSE SLES [x86_64]: 11
SP183, 111, 9 SP317, 9 SP417
28

Bull AIX: 5.116, 5.2, 5.3

FC-AL80

(D) Disable Queue Reset on (ACLX) Initiator Group7; (C) EMC Enginuity 5567: .53.30,
Unit Attention
Common Serial Number; (FA .54.31, .55.32, .56.33
LOOP ID) FA Loop ID; (H)
Enable Hard Addressing;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

EMC
Symmetrix
8000 Series

29

Bull AIX: 5.116, 5.2, 5.3

FC-AL80

(D) Disable Queue Reset on (ACLX) Initiator Group7; (C) EMC Enginuity 5568: .61.23,
Unit Attention; (EAN) Enable Common Serial Number; (FA .62.23, .64.24, .65.25, .66.25,

EMC
Symmetrix

Director Bit/Flag Information

19

Director Bit/Flag Information


Auto Negotiation; (UWN)
Unique World Wide Name

LOOP ID) FA Loop ID; (H)


Enable Hard Addressing;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

.67.26, .68.27, .68.28

8000 Series

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

30

Bull AIX: 5.116, 5.2, 5.3

FC-SW

(D) Disable Queue Reset on (ACLX) Initiator Group7; (C)


Unit Attention
Common Serial Number;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

31

Bull AIX: 5.116, 5.2, 5.3

FC-SW

(D) Disable Queue Reset on


Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7; (C)


Common Serial Number;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

32

Bull AIX: 5.116, 5.2, 5.3, 6.1

FC-AL80

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

33

Bull AIX: 5.116, 5.2, 5.3, 6.1

FC-AL80

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200713; (SPC-2)
SPC-2 compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix:
DMX-3,
DMX-4

34

Bull AIX: 5.116, 5.2, 5.3, 6.1

FC-AL80

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200798; (SPC-2)
SPC-2 compliance96

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

35

Bull AIX: 5.116, 5.2, 5.3, 6.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

36

Bull AIX: 5.116, 5.2, 5.3, 6.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200713; (SPC-2)
SPC-2 compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix:
DMX-3,
DMX-4

37

Bull AIX: 5.116, 5.2, 5.3, 6.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200798; (SPC-2)
SPC-2 compliance96

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

38

Bull AIX: 5.116, 5.2;

SCSI

(ACLX) Initiator Group7


(EAN) Enable Auto
Negotiation; (T) Tagged
Command97; (UWN) Unique
World Wide Name; (W)
Wide Transaction97

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

SCSI

(T) Tagged Command97;


(W) Wide Transaction97

(ACLX) Initiator Group7

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

IBM AIX: 5.115, 5.2

39

Bull AIX: 5.116, 5.2;


IBM AIX: 5.115, 5.2

40

Bull AIX: 5.2, 5.3, 6.1

FC-AL80

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

41

Bull AIX: 5.2, 5.3, 6.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

42

Egenera BladeFrame SW:


FC-AL80
5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,
5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,
5.1.1, 5.1.10, 5.1.11, 5.1.12,
5.1.13, 5.1.15, 5.1.16, 5.1.17,
5.1.18, 5.1.2, 5.1.3, 5.1.5,
5.1.8

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(OS2007) Host SCSI
Negotiation; (SC3) SCSI-3
Compliance 2007
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

43

Egenera BladeFrame SW:


FC-AL80
5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,
5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,
5.1.1, 5.1.10, 5.1.11, 5.1.12,
5.1.13, 5.1.15, 5.1.16, 5.1.17,
5.1.18, 5.1.2, 5.1.3, 5.1.5,
5.1.8

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(OS2007) Host SCSI
Negotiation; (SC3) SCSI-3
Compliance 200713
compliance; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

44

Egenera BladeFrame SW:


5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(OS2007) Host SCSI

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,

EMC
Symmetrix

Director Bit/Flag Information

20

Director Bit/Flag Information


5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,
5.1.1, 5.1.10, 5.1.11, 5.1.12,
5.1.13, 5.1.15, 5.1.16, 5.1.17,
5.1.18, 5.1.2, 5.1.3, 5.1.5,
5.1.8

Compliance 200798
Negotiation; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

.55.60, .58.64, .59.64, .60.65,


.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

DMX/DMX-2

45

FC-SW
Egenera BladeFrame SW:
5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,
5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,
5.1.1, 5.1.10, 5.1.11, 5.1.12,
5.1.13, 5.1.15, 5.1.16, 5.1.17,
5.1.18, 5.1.2, 5.1.3, 5.1.5,
5.1.8

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 2007
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

46

FC-SW
Egenera BladeFrame SW:
5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,
5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,
5.1.1, 5.1.10, 5.1.11, 5.1.12,
5.1.13, 5.1.15, 5.1.16, 5.1.17,
5.1.18, 5.1.2, 5.1.3, 5.1.5,
5.1.8

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 200713
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

47

FC-SW
Egenera BladeFrame SW:
5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,
5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,
5.1.1, 5.1.10, 5.1.11, 5.1.12,
5.1.13, 5.1.15, 5.1.16, 5.1.17,
5.1.18, 5.1.2, 5.1.3, 5.1.5,
5.1.8

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 200798
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

48

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 2007
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

49

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 200713
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

50

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 200798
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance96;
(UWN) Unique World Wide
Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

51

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-AL80;
FC-SW

(ACLX) Initiator Group; (C)


Common Serial Number12;
(D) Disable Queue Reset on
Unit Attention; (LOOP ID)
Loop ID95; (NP) Hard
Addressing Non-participate;
(OS2007) Host SCSI
Compliance 2007; (OVMS)
Open VMS; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name; (V)
Enable Volume Set
Addressing

52

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-AL80;
FC-SW

(C) Common Serial Number; (OS2007) Host SCSI


(D) Disable Queue Reset on Compliance 2007
Unit Attention; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

53

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 2007
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

54

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 200713
Auto Negotiation; (PP)

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,

EMC
Symmetrix
DMX-3

Director Bit/Flag Information

EMC Enginuity 5875: .135.91, EMC


(ACLX) Initiator Group; (D)
Symmetrix
Disable Queue Reset on Unit .139.93, .198.148, .231.172
VMAX
Attention; (EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SC3) SCSI-3 compliance74;
(SPC-2) SPC-2
compliance73

21

Director Bit/Flag Information


Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

.104.114, .105.115, .111.119,


.112.120, .113.121, .114.121

55

Egenera BladeFrame SW:


5.2, 5.2.2, 5.2.3

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 200798
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance96;
(UWN) Unique World Wide
Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

56

EMC DART 5.4.14

SCSI

(ACLX) Initiator Group7


(ARB) Avoid Reset
Broadcast; (EAN) Enable
Auto Negotiation; (L) Linked
Commands97; (T) Tagged
Command97; (UWN) Unique
World Wide Name; (W)
Wide Transaction97; (Y)
Synchronous Transaction97

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

57

EMC DART 5.4.14

SCSI

(ARB) Avoid Reset


Broadcast; (L) Linked
Commands97; (T) Tagged
Command97; (W) Wide
Transaction97; (Y)
Synchronous Transaction97

(ACLX) Initiator Group7

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

58

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.26,
5.4.27.2, 5.4.28, 5.4.29,
5.4.30, 5.4.31

FC-AL80

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

59

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.26,
5.4.27.2, 5.4.28, 5.4.29,
5.4.30, 5.4.31

FC-AL80;
FC-SW

(ARB) Avoid Reset


Broadcast

(ACLX) Initiator Group7

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

60

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.26,
5.4.27.2, 5.4.28, 5.4.29,
5.4.30, 5.4.31

FC-SW

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

61

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.27.2,
5.4.28, 5.4.29, 5.4.30, 5.4.31

FC-AL80

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121;
EMC Enginuity 5772: .55.51,
.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

62

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.27.2,
5.4.28, 5.4.29, 5.4.30, 5.4.31

FC-AL80

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

63

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.27.2,
5.4.28, 5.4.29, 5.4.30, 5.4.31

FC-SW

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121;
EMC Enginuity 5772: .55.51,
.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

64

EMC DART: 5.4.14, 5.4.15,


5.4.16, 5.4.17, 5.4.18,
5.4.19.4, 5.4.20, 5.4.21.4,
5.4.22, 5.4.22.2, 5.4.23,
5.4.24.8, 5.4.25, 5.4.27.2,
5.4.28, 5.4.29, 5.4.30, 5.4.31

FC-SW

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,

EMC
Symmetrix
DMX-4

Director Bit/Flag Information

22

Director Bit/Flag Information


.168.115, .175.122
65

FC-AL80
EMC DART: 5.5.19.4,
5.5.20.1, 5.5.21.4, 5.5.22.1,
5.5.22.2, 5.5.23.0, 5.5.23.2,
5.5.24, 5.5.24.2, 5.5.25,
5.5.26, 5.5.26.4, 5.5.27,
5.5.28, 5.5.29, 5.5.29.1,
5.5.30, 5.5.30.5, 5.5.31,
5.5.32, 5.5.33, 5.5.34, 5.5.35,
5.5.36.2

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

66

FC-SW
EMC DART: 5.5.19.4,
5.5.20.1, 5.5.21.4, 5.5.22.1,
5.5.22.2, 5.5.23.0, 5.5.23.2,
5.5.24, 5.5.24.2, 5.5.25,
5.5.26, 5.5.26.4, 5.5.27,
5.5.28, 5.5.29, 5.5.29.1,
5.5.30, 5.5.30.5, 5.5.31,
5.5.32, 5.5.33, 5.5.34, 5.5.35,
5.5.36.2

(ARB) Avoid Reset


Broadcast; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

67

Fujitsu Technology Solutions


BS2000/OSD: V5.0, V6.0,
V7.0

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (E)
Environment Reports to
Host; (EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix:
DMX-3,
DMX-4

68

Fujitsu Technology Solutions


BS2000/OSD: V5.0, V6.0,
V7.0;

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (E)
Environment Reports to
Host; (EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

Fujitsu Technology Solutions


OSD/XC: V1.0, V1.1, V1.2,
V2.0, V2.1, V2.2, V3.0

69

Fujitsu Technology Solutions


OSD/XC: V1.0, V1.1, V1.2,
V2.0, V2.1, V2.2, V3.0

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (E)
Environment Reports to
Host; (EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix:
DMX-3,
DMX-4

70

Fujitsu Technology Solutions


OSD/XC: V1.0, V1.1, V1.2,
V2.0, V2.1, V2.2, V3.0

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (E)
Environment Reports to
Host; (EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78;
EMC Enginuity 5772: .55.51,
.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX/DMX-2

71

Hewlett Packard HP-UX 11i


v1.0 (HP-UX 11.11)

FC-SW

(C) Common Serial Number; (EAN) Enable Auto


(LOOP ID) Loop ID; (NP)
Negotiation; (VCM) Enable
Hard Addressing
Fibrepath on thie Port
Non-participate; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

72

Hewlett Packard HP-UX 11i


v2 (HP-UX 11.23)

FC-SW

(C) Common Serial Number; (EAN) Enable Auto


(LOOP ID) Loop ID; (PP)
Negotiation; (VCM) Enable
Enable Point-to-point;
Fibrepath on thie Port
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

73

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(OS2007) Host SCSI
Negotiation; (LOOP ID)
Compliance 2007100
Loop ID; (NP) Hard
Addressing Non-participate;
(SPC-2) SPC-2 compliance;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

74

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(OS2007) Host SCSI
Negotiation; (LOOP ID)
Compliance 200713, 100
Loop ID; (NP) Hard
Addressing Non-participate;
(SPC-2) SPC-2
compliance14; (UWN)

EMC Enginuity 5771:


.68.75101, .81.90101,
.83.92101, .86.95101,
.87.95101, .91.99101,
.92.99101, .94.102101,
.95.103101, .99.108101,
.100.108101, .104.114101,

EMC
Symmetrix
DMX-3

Director Bit/Flag Information

23

Director Bit/Flag Information


Unique World Wide Name;
(V) Enable Volume Set
Addressing

.105.115101, .111.119101,
.112.120101, .113.121101,
.114.121101
EMC Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

EMC Enginuity 5671:


.31.3599, .32.3699, .45.5299,
.48.5699, .54.5999, .55.6099,
.58.6499, .59.6499, .60.6599,
.65.6999, .68.7199, .69.7199,
.74.7599, .75.7599, .80.7799,
.81.7899, .82.7899

EMC
Symmetrix
DMX/DMX-2

75

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 2007100
Negotiation; (LOOP ID)
Loop ID; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name; (V)
Enable Volume Set
Addressing

76

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-AL80

(C) Common Serial Number;


(LOOP ID) Loop ID; (NP)
Hard Addressing
Non-participate; (SPC-2)
SPC-2 compliance96;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

77

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 2007100
Negotiation; (NP) Hard
Addressing Non-participate;
(PP) Enable Point-to-point;
(SPC-2) SPC-2 compliance;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

78

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 200713, 100
Negotiation; (NP) Hard
Addressing Non-participate;
(PP) Enable Point-to-point;
(SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

EMC Enginuity 5771:


.68.75101, .81.90101,
.83.92101, .86.95101,
.87.95101, .91.99101,
.92.99101, .94.102101,
.95.103101, .99.108101,
.100.108101, .104.114101,
.105.115101, .111.119101,
.112.120101, .113.121101,
.114.121101

EMC
Symmetrix
DMX-3

79

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(EAN) Enable Auto
Compliance 2007100
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

80

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number;


(LOOP ID) Loop ID; (NP)
Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

81

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number;


(NP) Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

82

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number;


(PP) Enable Point-to-point;
(SPC-2) SPC-2 compliance;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-4

83

Hewlett Packard HP-UX 11i


v3 (HP-UX 11.31)

FC-SW

(C) Common Serial Number;


(PP) Enable Point-to-point;
(SPC-2) SPC-2 compliance;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007100;
(SC3) SCSI-3 compliance

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

84

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number;


(LOOP ID) Loop ID; (NP)
Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

85

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number;


(LOOP ID) Loop ID; (NP)
Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;

(EAN) Enable Auto


Negotiation; (SPC-2) SPC-2
compliance; (VCM) Enable
Fibrepath on thie Port

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

Director Bit/Flag Information

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 200798

24

Director Bit/Flag Information


(V) Enable Volume Set
Addressing
86

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number; (EAN) Enable Auto


Negotiation; (VCM) Enable
(LOOP ID) Loop ID; (NP)
Fibrepath on thie Port
Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

87

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number;


(NP) Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(EAN) Enable Auto


Negotiation; (SPC-2) SPC-2
compliance; (VCM) Enable
Fibrepath on thie Port

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

88

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number;


(NP) Hard Addressing
Non-participate; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(EAN) Enable Auto


Negotiation; (SPC-2) SPC-2
compliance96; (VCM) Enable
Fibrepath on thie Port

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

89

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number;


(PP) Enable Point-to-point;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

90

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number;


(PP) Enable Point-to-point;
(UWN) Unique World Wide
Name; (V) Enable Volume
Set Addressing

(EAN) Enable Auto


Negotiation; (SPC-2) SPC-2
compliance; (VCM) Enable
Fibrepath on thie Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

91

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23)

FC-SW

(C) Common Serial Number; (EAN) Enable Auto


Negotiation; (VCM) Enable
(PP) Enable Point-to-point;
(UWN) Unique World Wide Fibrepath on thie Port
Name; (V) Enable Volume
Set Addressing

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

92

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23), v3 (HP-UX
11.31);

FC-SW

(ACLX) Initiator Group; (C)


Common Serial Number12;
(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (LOOP ID)
Loop ID; (NP) Hard
Addressing Non-participate;
(OS2007) Host SCSI
Compliance 2007; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

IBM AIX: 5.2, 5.3, 6.1, 7.1;


Microsoft Windows 2003
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;

EMC Enginuity 5875:


(8G) Link Speed; (ACLX)
Initiator Group; (C) Common .198.148.e, .231.172.e
Serial Number12; (D) Disable
Queue Reset on Unit
Attention; (EAN) Enable Auto
Negotiation; (H) Enable Hard
Addressing; (LOOP ID) Loop
ID; (NP) Hard Addressing
Non-participate; (OS2007)
Host SCSI Compliance
200798; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73; (UWN)
Unique World Wide Name

EMC
Symmetrix
VMAXe

Microsoft Windows 2003 [x64]


Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2,
SP2;
Microsoft Windows 2008 R2
SP1: [IA64] for Itanium-Based
Systems, [x64] DataCenter,

Director Bit/Flag Information

25

Director Bit/Flag Information


[x64] Enterprise Edition, [x64]
Standard Edition, [x64]
Storage Server;
Microsoft Windows 2008 R2:
[IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition, [x64]
Storage Server;
Microsoft Windows 2008
[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2,
Storage Server, Storage
Server SP2, Web Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
VMware ESX: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120;
VMware ESXi: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120,
5.0 (vSphere 5)69, 93, 94, 105
93

Hewlett Packard HP-UX 11i:


v1.0 (HP-UX 11.11), v2
(HP-UX 11.23), v3 (HP-UX
11.31);

FC-AL80

Microsoft Windows 2003


Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;

(ACLX) Initiator Group; (C)


Common Serial Number12;
(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (LOOP ID)
Loop ID; (NP) Hard
Addressing Non-participate;
(OS2007) Host SCSI
Compliance 2007; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

EMC Enginuity 5875:


(8G) Link Speed; (ACLX)
Initiator Group; (C) Common .198.148.e, .231.172.e
Serial Number12; (D) Disable
Queue Reset on Unit
Attention; (EAN) Enable Auto
Negotiation; (H) Enable Hard
Addressing; (LOOP ID) Loop
ID; (NP) Hard Addressing
Non-participate; (OS2007)
Host SCSI Compliance
200798; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73; (UWN)
Unique World Wide Name

EMC
Symmetrix
VMAXe

Microsoft Windows 2003 [x64]


Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2,
SP2;
Microsoft Windows 2008 R2
SP1: [IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition, [x64]
Storage Server;
Microsoft Windows 2008 R2:
[IA64] for Itanium-Based

Director Bit/Flag Information

26

Director Bit/Flag Information


Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition, [x64]
Storage Server;
Microsoft Windows 2008
[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2,
Storage Server, Storage
Server SP2, Web Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
VMware ESX: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120;
VMware ESXi: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120,
5.0 (vSphere 5)69, 93, 94, 105
EMC Enginuity 5567: .53.30,
.54.31, .55.32, .56.33; EMC
Enginuity 5568: .61.23,
.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200798; (SPC-2)
SPC-2 compliance96

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

(OVMS) Open VMS; (PP)


Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

FC-SW

(OVMS) Open VMS; (PP)


Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2
compliance73

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

Hewlett Packard Open VMS:


V7.3-2, V8.2, V8.2-1, V8.3,
V8.3-1H1

FC-SW

(OVMS) Open VMS; (PP)


Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

(EAN) Enable Auto


Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance;
(VCM) Enable Fibrepath on
thie Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

99

Hewlett Packard Open VMS:


V7.3-2, V8.2, V8.2-1, V8.3,
V8.3-1H1

FC-SW

(OVMS) Open VMS; (PP)


Enable Point-to-point; (SC3)
SCSI-3 compliance; (UWN)
Unique World Wide Name

(EAN) Enable Auto


Negotiation; (OS2007) Host
SCSI Compliance 200713;
(SPC-2) SPC-2
compliance14; (VCM) Enable
Fibrepath on thie Port

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix:
DMX-3,
DMX-4

100

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-0, V5.1B-1, V5.1B-278,
V5.1B-3, V5.1B-479

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

101

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-0, V5.1B-1, V5.1B-278,
V5.1B-3, V5.1B-479

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 200713;
(SPC-2) SPC-2
compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-4

102

FC-SW

(EAN) Enable Auto


(OVMS) Open VMS; (PP)
Enable Point-to-point; (SC3) Negotiation; (VCM) Enable
SCSI-3 compliance; (UWN) Fibrepath on thie Port
Unique World Wide Name

94

Hewlett Packard Open VMS: FC-SW


V6.2, V6.2-1H3, V7.3-2, V8.2,
V8.2-1, V8.3, V8.3-1H1

95

Hewlett Packard Open VMS:


V7.3-2, V8.2, V8.2-1, V8.3,
V8.3-1H1

FC-SW

(EAN) Enable Auto


Negotiation; (OVMS) Open
VMS; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

96

Hewlett Packard Open VMS:


V7.3-2, V8.2, V8.2-1, V8.3,
V8.3-1H1

FC-SW

97

Hewlett Packard Open VMS:


V7.3-2, V8.2, V8.2-1, V8.3,
V8.3-1H1

98

Director Bit/Flag Information

27

Director Bit/Flag Information


Hewlett Packard Tru64 UNIX:
V5.1B-0, V5.1B-1, V5.1B-278,
V5.1B-3, V5.1B-479

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(SPC-2) SPC-2
EMC Enginuity 5671: .31.35,
compliance96; (VCM) Enable .32.36, .45.52, .48.56, .54.59,
Fibrepath on thie Port
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

103

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-0, V5.1B-1, V5.1B-278,
V5.1B-3, V5.1B-479

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(VCM) Enable Fibrepath on


thie Port

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33; EMC
Enginuity 5568: .61.23,
.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

104

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-0, V5.1B-1, V5.1B-278,
V5.1B-3, V5.1B-479,
V5.1B-5127, V5.1B-6128

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

105

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-0, V5.1B-1, V5.1B-278,
V5.1B-3, V5.1B-479,
V5.1B-5127, V5.1B-6128

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2
compliance73

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

106

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-5127, V5.1B-6128

(EAN) Enable Auto


Negotiation; (OVMS) Open
VMS; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

(OS2007) Host SCSI


Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
DMX/DMX-2

107

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-5127, V5.1B-6128

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SPC-2) SPC-2 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
DMX-4

108

Hewlett Packard Tru64 UNIX: FC-SW


V5.1B-5127, V5.1B-6128

(OVMS) Open VMS; (PP)


Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group;


(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
8000 Series

109

IBM AIX 7.1

FC-AL80;
FC-SW

(C) Common Serial


Number12; (FA LOOP ID)
FA Loop ID95; (OS2007)
Host SCSI Compliance
2007; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73

EMC Enginuity 5874 .248.194 EMC


Symmetrix
VMAX

110

IBM AIX: 5.115, 5.2, 5.3

FC-AL80

(D) Disable Queue Reset on (ACLX) Initiator Group7; (C) EMC Enginuity 5567: .53.30,
.54.31, .55.32, .56.33
Unit Attention
Common Serial Number12;
(FA LOOP ID) FA Loop ID;
(H) Enable Hard Addressing;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

111

IBM AIX: 5.115, 5.2, 5.3

FC-AL80

(D) Disable Queue Reset on


Unit Attention; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

112

IBM AIX: 5.115, 5.2, 5.3

FC-SW

(D) Disable Queue Reset on (ACLX) Initiator Group7; (C)


Unit Attention
Common Serial Number12;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

113

IBM AIX: 5.115, 5.2, 5.3

FC-SW

(D) Disable Queue Reset on


Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

114

IBM AIX: 5.115, 5.2, 5.3, 6.1,


7.1

FC-AL80

115

IBM AIX: 5.115, 5.2, 5.3, 6.1,


7.1

FC-AL80

116

(ACLX) Initiator Group7; (C) EMC Enginuity 5568: .61.23,


Common Serial Number12;
.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28
(FA LOOP ID) FA Loop ID;
(H) Enable Hard Addressing;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

EMC
Symmetrix
8000 Series

EMC
Symmetrix
8000 Series

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(UWN) Unique World Wide
Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 200713; (SPC-2)
SPC-2 compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix:
DMX-3,
DMX-4

FC-AL80

Director Bit/Flag Information

28

Director Bit/Flag Information


IBM AIX: 5.115, 5.2, 5.3, 6.1,
7.1

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 200798; (SPC-2)
SPC-2 compliance96

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

117

IBM AIX: 5.115, 5.2, 5.3, 6.1,


7.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

118

IBM AIX: 5.115, 5.2, 5.3, 6.1,


7.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 200713; (SPC-2)
SPC-2 compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix:
DMX-3,
DMX-4

119

IBM AIX: 5.115, 5.2, 5.3, 6.1,


7.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 200798; (SPC-2)
SPC-2 compliance96

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

120

IBM AIX: 5.2, 5.3, 6.1, 7.1

FC-AL80

(EAN) Enable Auto


Negotiation; (LOOP ID)
Loop ID; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

121

IBM AIX: 5.2, 5.3, 6.1, 7.1

FC-AL80;
FC-SW

(C) Common Serial


Number12; (LOOP ID) Loop
ID95; (OS2007) Host SCSI
Compliance 2007; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

122

IBM AIX: 5.2, 5.3, 6.1, 7.1

FC-SW

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7; (C)


Common Serial Number12;
(OS2007) Host SCSI
Compliance 2007; (SPC-2)
SPC-2 compliance

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

123

IBM AIX: 5.2, 5.3, 6.1, 7.1;

FC-AL80;
FC-SW

(C) Common Serial


Number12; (FA LOOP ID)
FA Loop ID95; (OS2007)
Host SCSI Compliance
2007; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

IBM VIOS: 2.1, 2.1.0.10,


2.1.1, 2.1.1.10-FP21,
2.1.2.10-FP22,
2.1.2.12-FP22.1,
2.1.2.13-FP22.1 SP-02,
2.1.3.10-FP23,
2.2.0.10-FP24,
2.2.0.11-FP24-SP01,
2.2.0.12-FP24-SP02,
2.2.0.13-FP24-SP03
124

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-AL80

(ARB) Avoid Reset


Broadcast; (AS4) AS/400
Ports Only; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

125

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-AL80

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121;
EMC Enginuity 5772: .55.51,
.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

126

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-AL80

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

127

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-AL80;
FC-SW

(ARB) Avoid Reset


Broadcast; (AS4) AS/400
Ports Only

(ACLX) Initiator Group7

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

128

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-AL80;
SCSI

(ARB) Avoid Reset


Broadcast; (AS4) AS/400
Ports Only; (EAN) Enable
Auto Negotiation; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

129

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-SW

(ARB) Avoid Reset


Broadcast; (AS4) AS/400
Ports Only; (EAN) Enable

(ACLX) Initiator Group7

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

Director Bit/Flag Information

29

Director Bit/Flag Information


Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name
130

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-SW

(ARB) Avoid Reset


Broadcast; (AS4) AS/400
Ports Only; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

131

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-SW

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121;
EMC Enginuity 5772: .55.51,
.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

132

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

FC-SW

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

133

IBM AS/400 Internal


Emulation iSeries Boot Drive
Extender

SCSI

(ARB) Avoid Reset


Broadcast; (AS4) AS/400
Ports Only; (Z) Set QERR97

(ACLX) Initiator Group7

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

134

IBM IBM i: 7.1124, i6.1.1125;

FC-AL

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name; (V)
Enable Volume Set
Addressing

(ACLX) Initiator Group

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3122,
DMX-4122

FC-AL

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name; (V)
Enable Volume Set
Addressing

(ACLX) Initiator Group

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201; EMC Enginuity
5875: .135.91, .139.93,
.198.148, .231.172

EMC
Symmetrix
VMAX121, 122

FC-SW

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(ACLX) Initiator Group

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3122,
DMX-4122

FC-SW

(AS4) AS/400 Ports Only;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

(ACLX) Initiator Group

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201; EMC Enginuity
5875: .135.91, .139.93,
.198.148, .231.172

EMC
Symmetrix
VMAX121, 122

FC-AL80;
FC-SW

(C) Common Serial


Number12; (LOOP ID) Loop
ID95; (OS2007) Host SCSI
Compliance 2007; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 2007;
(SC3) SCSI-3 compliance74;
(SPC-2) SPC-2
compliance73

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

IBM i5/OS [System i]:


V5R4M5123, V6R1/i6.1

135

IBM IBM i: 7.1124, i6.1.1125;


IBM i5/OS [System i]:
V5R4M5123, V6R1/i6.1

136

IBM IBM i: 7.1124, i6.1.1125;


IBM i5/OS [System i]:
V5R4M5123, V6R1/i6.1

137

IBM IBM i: 7.1124, i6.1.1125;


IBM i5/OS [System i]:
V5R4M5123, V6R1/i6.1

138

IBM VIOS: 2.1, 2.1.0.10,


2.1.1, 2.1.1.10-FP21,
2.1.2.10-FP22,
2.1.2.12-FP22.1,
2.1.2.13-FP22.1 SP-02,
2.1.3.10-FP23,
2.2.0.10-FP24,
2.2.0.11-FP24-SP01,
2.2.0.12-FP24-SP02,
2.2.0.13-FP24-SP03

139

Microsoft Windows 2003


FC-AL80
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003 [x64]
DataCenter: R2 SP2, SP2;

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (L) Linked
Commands97; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (T) Tagged
Command97; (UWN) Unique
World Wide Name; (W)
Wide Transaction97; (Y)
Synchronous Transaction97

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

Microsoft Windows 2003 [x64]


Enterprise Edition: R2 SP2,
SP2;

Director Bit/Flag Information

30

Director Bit/Flag Information


Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
140

FC-AL80
Microsoft Windows 2003
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;

(C) Common Serial Number; (ACLX) Initiator Group7


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 200798;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (L) Linked
Commands97; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (T) Tagged
Command97; (W) Wide
Transaction97; (Y)
Synchronous Transaction97

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

Microsoft Windows 2003 [x64]


DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
141

Microsoft Windows 2003


FC-AL80;
Unified Data Storage Server
FC-SW
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003 [x64]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]

Director Bit/Flag Information

31

Director Bit/Flag Information


Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
142

FC-AL80;
Microsoft Windows 2003
FC-SW
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;

(C) Common Serial Number;


(OS2007) Host SCSI
Compliance 2007; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance

Microsoft Windows 2003


[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

Microsoft Windows 2003 [x64]


DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
143

Microsoft Windows 2003


FC-AL80;
Unified Data Storage Server
FC-SW
[x64]: Enterprise Edition SP2,
Standard Edition SP2;

(C) Common Serial Number;


(OS2007) Host SCSI
Compliance 2007; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance

(EAN) Enable Auto


Negotiation; (PP) Enable
Point-to-point; (VCM) Enable
Fibrepath on thie Port

Microsoft Windows 2003


[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003 [x64]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;

Director Bit/Flag Information

32

Director Bit/Flag Information


Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
144

FC-AL80;
Microsoft Windows 2003
FC-SW
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;

(C) Common Serial Number; (EAN) Enable Auto


Negotiation; (OS2007) Host
(SPC-2) SPC-2
SCSI Compliance 200713;
compliance14
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(VCM) Enable Fibrepath on
thie Port

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (L) Linked
Commands97; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (T) Tagged
Command97; (UWN) Unique
World Wide Name; (W)
Wide Transaction97; (Y)
Synchronous Transaction97

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

Microsoft Windows 2003 [x64]


DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
145

Microsoft Windows 2003


FC-SW
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003 [x64]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]

Director Bit/Flag Information

33

Director Bit/Flag Information


Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
146

FC-SW
Microsoft Windows 2003
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;

(C) Common Serial Number; (ACLX) Initiator Group7


(EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 200798;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

(C) Common Serial Number; (EAN) Enable Auto


(OS2007) Host SCSI
Negotiation; (PP) Enable
Compliance 2007; (SC3)
Point-to-point
SCSI-3 compliance; (SPC-2)
SPC-2 compliance

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

Microsoft Windows 2003 [x64]


DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2, SP2
147

Microsoft Windows 2003


FC-AL80;
Unified Data Storage Server
FC-SW
[x64]: Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003
[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003 [x64]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;

Director Bit/Flag Information

34

Director Bit/Flag Information


Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2,
SP2;
Microsoft Windows 2008 R2:
[IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition;
Microsoft Windows 2008
[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server
148

FC-AL80;
Microsoft Windows 2003
FC-SW
Unified Data Storage Server
[x64]: Enterprise Edition SP2,
Standard Edition SP2;

(C) Common Serial


Number12; (OS2007) Host
SCSI Compliance 2007;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

Microsoft Windows 2003


[IA64]: DataCenter SP2,
Enterprise Edition SP2,
Standard Edition SP2;
Microsoft Windows 2003 [x64]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
DataCenter: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Enterprise Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Standard Edition: R2 SP2,
SP2;
Microsoft Windows 2003 [x86]
Storage Server Enterprise
Edition: R2 SP2, SP2;
Microsoft Windows 2003 [x86]
Storage Server: R2 SP2,

Director Bit/Flag Information

35

Director Bit/Flag Information


SP2;
Microsoft Windows 2008 R2:
[IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition;
Microsoft Windows 2008
[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server
149

Microsoft Windows 2008 R2: FC-AL80;


FC-SW
[IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition;

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

(C) Common Serial Number; (EAN) Enable Auto


Negotiation; (PP) Enable
(OS2007) Host SCSI
Point-to-point
Compliance 2007; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix:
DMX-3,
DMX-4

(C) Common Serial Number; (EAN) Enable Auto


(OS2007) Host SCSI
Negotiation; (PP) Enable
Compliance 200713; (SC3)
Point-to-point
SCSI-3 compliance; (SPC-2)
14
SPC-2 compliance

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

(C) Common Serial Number;


(OS2007) Host SCSI
Compliance 2007; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance

(ACLX) Initiator Group;


(EAN) Enable Auto
Negotiation; (UWN) Unique
World Wide Name

Microsoft Windows 2008


[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server
150

Microsoft Windows 2008 R2: FC-AL80;


FC-SW
[IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition;
Microsoft Windows 2008
[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server

151

Microsoft Windows 2008 R2: FC-AL80;


[IA64] for Itanium-Based
FC-SW
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition;
Microsoft Windows 2008
[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;

Director Bit/Flag Information

36

Director Bit/Flag Information


Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server
152

Microsoft Windows 2008 R2: FC-AL80;


FC-SW
[IA64] for Itanium-Based
Systems, [x64] DataCenter,
[x64] Enterprise Edition, [x64]
Standard Edition;

EMC
Symmetrix
DMX/DMX-2

(C) Common Serial Number; (PP) Enable Point-to-point


(OS2007) Host SCSI
Compliance 200798; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance96

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

Microsoft Windows 2008


[IA64] for Itanium-Based:
Systems, Systems SP2;
Microsoft Windows 2008
[x64]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server;
Microsoft Windows 2008
[x86]: DataCenter,
DataCenter SP2, Enterprise
Edition, Enterprise Edition
SP2, Standard Edition,
Standard Edition SP2, Web
Server
153

Novell Netware 6.5: SP5,


SP6, SP7, SP8

FC-AL80;
FC-SW

(OS2007) Host SCSI


(ACLX) Initiator Group; (C)
Common Serial Number; (D) Compliance 2007
Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

154

Novell Netware 6.5: SP5,


SP6, SP7, SP8

FC-AL80;
FC-SW

(ACLX) Initiator Group; (C)


Common Serial Number12;
(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (LOOP ID)
Loop ID; (NP) Hard
Addressing Non-participate;
(OS2007) Host SCSI
Compliance 2007; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name;
(V) Enable Volume Set
Addressing

155

Novell Netware 6.5: SP5,


SP6, SP7, SP8

FC-AL80;
FC-SW

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention2; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance

156

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

FC-AL80

157

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

158

159

See3, 4, 5, 6

EMC
Symmetrix
VMAXe

See3, 4, 5, 6

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

See3, 4, 5, 6

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance;
(UWN) Unique World Wide
Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

See3, 4, 5, 6

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

See3, 4, 5, 6

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

See3, 4, 5, 6

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,

EMC
Symmetrix

See3, 4, 5, 6

Director Bit/Flag Information

EMC Enginuity 5875:


(8G) Link Speed; (ACLX)
Initiator Group; (C) Common .198.148.e, .231.172.e
Serial Number12; (D) Disable
Queue Reset on Unit
Attention; (EAN) Enable Auto
Negotiation; (H) Enable Hard
Addressing; (LOOP ID) Loop
ID; (NP) Hard Addressing
Non-participate; (OS2007)
Host SCSI Compliance
200798; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73; (UWN)
Unique World Wide Name

37

Director Bit/Flag Information


SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

Unit Attention2; (EAN)


Enable Auto Negotiation;
(UWN) Unique World Wide
Name

.67.26, .68.27, .68.28

8000 Series

160

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance;
(UWN) Unique World Wide
Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

See3, 4, 5, 6

161

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

See3, 4, 5, 6

162

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

See3, 4, 5, 6

163

Novell Netware: 6.5, 6.5


SP1.1, 6.5 SP2, 6.5 SP3, 6.5
SP4, 6.5 SP4a, 6.5 SP5, 6.5
SP6, 6.5 SP7, 6.5 SP8

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7


(D) Disable Queue Reset on
Unit Attention2; (EAN)
Enable Auto Negotiation;
(PP) Enable Point-to-point;
(UWN) Unique World Wide
Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

See3, 4, 5, 6

164

Oracle Linux [32-Bit] 4: U4,


U5, U6, U7, U891, U9126;

FC-AL80;
FC-SW

(ACLX) Initiator Group;


(C) Common Serial
(OS2007) Host SCSI
Number12; (D) Disable
Compliance 2007
Queue Reset on Unit
Attention; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

Oracle Linux [32-Bit]: 5.0, 5.1,


5.2, 5.38, 5.486, 5.585;
Oracle Linux [x86_64] 4: U4,
U5, U6, U7, U891, U9126;
Oracle Linux [x86_64]: 5.0,
5.1, 5.2, 5.38, 5.486, 5.585;
Red Hat RHEL [32-Bit]: 5.0,
5.1, 5.2;
Red Hat RHEL [IA64]: 5.0,
5.1, 5.2, 5.311, 5.490, 5.584,
5.6114, 115, 5.7108;
Red Hat RHEL [IBM Power]:
4.5 AS33, 4.6 AS34, 4.7 AS,
4.8 AS92, 4.9 AS116, 5.036,
5.137, 5.238, 5.311, 5.490,
5.584, 6.081;
Red Hat RHEL [s390-31-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390-31-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35;
Red Hat RHEL [s390x-64-Bit]
4.0: U2 AS29, 30, U3 AS/ES30,
31, U4 AS/ES30, 32;
Red Hat RHEL [s390x-64-Bit]:
4.5 AS/ES33, 4.6 AS/ES30, 34,
4.7 AS/ES30, 35, 5.0 AS/ES36,
5.1 AS/ES37, 5.238;
Red Hat RHEL [x86_64]: 5.0,
5.1, 5.2;
SuSE SLES [32-Bit]: 10, 10
SP121, 22;
SuSE SLES [IA64]: 10, 10
SP1, 10 SP2, 10 SP387, 10
SP4112, 11 SP183, 111, 9
SP317, 9 SP417, 18;
SuSE SLES [IBM Power] 10:

Director Bit/Flag Information

38

Director Bit/Flag Information


SP125, SP2, SP387, SP4112;
SuSE SLES [IBM Power]:
111, 9 SP317,

1024, 11 SP183,
19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10


SP125, 1024, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [s390x-64-Bit]
10: SP125, 26, 27, SP226, 27,
28;
SuSE SLES [s390x-64-Bit]:
1024, 26, 27, 9 SP3
v2.6.5-7.24417, 9 SP3+
v2.6.5-7.25217, 9 SP417, 18;
SuSE SLES [x86_64]: 10, 10
SP121, 22
165

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103

FC-AL80

(C) Common Serial Number; (OS2007) Host SCSI


(D) Disable Queue Reset on Compliance 2007
Unit Attention; (EAN) Enable
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

166

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103

FC-AL80

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

167

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103

FC-AL80;
FC-SW

(C) Common Serial Number; (OS2007) Host SCSI


(D) Disable Queue Reset on Compliance 2007
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

168

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103

FC-AL80;
FC-SW

(OS2007) Host SCSI


(C) Common Serial
Compliance 2007
Number12; (D) Disable
Queue Reset on Unit
Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5875: .135.91, EMC


.139.93, .198.148, .231.172
Symmetrix
VMAX

169

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103

FC-SW

(C) Common Serial Number; (OS2007) Host SCSI


(D) Disable Queue Reset on Compliance 2007
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

170

Oracle Linux UEK [x86_64]:


5.6107, 5.7104, 6.0106, 6.1103

FC-SW

(C) Common Serial Number;


(D) Disable Queue Reset on
Unit Attention; (EAN) Enable
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

171

Oracle Linux: [32-Bit] 4


U9126, [x86_64] 4 U9126;

FC-AL80;
FC-SW

(C) Common Serial Number; (ACLX) Initiator Group;


(D) Disable Queue Reset on (OS2007) Host SCSI
Unit Attention; (EAN) Enable Compliance 2007
Auto Negotiation; (PP)
Enable Point-to-point; (SC3)
SCSI-3 compliance; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5874 .248.194 EMC


Symmetrix
VMAX

Red Hat RHEL [32-Bit]: 4.9


AS/ES116, 5.6114, 115;
Red Hat RHEL [IA64]: 4.9
AS/ES116, 5.6114, 115;
Red Hat RHEL: [IBM Power]
4.9 AS116, [x86_64] 4.9
AS/ES116, [x86_64] 5.6114,
115;
SuSE SLES: [32-Bit] 10

Director Bit/Flag Information

39

Director Bit/Flag Information


SP421, 88, 89, 112, [IA64] 10
SP4112, [IBM Power] 10
SP4112, [x86_64] 10 SP421,
88, 89, 112, 113

172

Oracle Solaris 10: SPARC,


x8675;

FC-AL80;
FC-SW

(C) Common Serial Number; (ACLX) Initiator Group; (D)


(UWN) Unique World Wide Disable Queue Reset on Unit
Name
Attention; (EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 200772;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance74;
(SPC-2) SPC-2
compliance73

FC-AL80;
FC-SW

EMC Enginuity 5875:


(C) Common Serial Number; (ACLX) Initiator Group; (D)
(UWN) Unique World Wide Disable Queue Reset on Unit .198.148.e, .231.172.e
Name
Attention; (EAN) Enable Auto
Negotiation; (OS2007) Host
SCSI Compliance 200772;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance74;
(SPC-2) SPC-2
compliance73

FC-AL80;
FC-SW

EMC Enginuity 5875: .135.91, EMC


(C) Common Serial Number; (ACLX) Initiator Group; (D)
Symmetrix
(UWN) Unique World Wide Disable Queue Reset on Unit .139.93, .198.148, .231.172
VMAX
Name
Attention; (EAN) Enable Auto
Negotiation; (OS2007) Host
72
SCSI Compliance 2007 ;
(SC3) SCSI-3 compliance74;
(SPC-2) SPC-2
compliance73

FC-AL80;
FC-SW

EMC Enginuity 5568: .61.23,


(C) Common Serial Number; (A) Enable Sunapee; (D)
(UWN) Unique World Wide Disable Queue Reset on Unit .62.23, .64.24, .65.25, .66.25,
Attention; (EAN) Enable Auto .67.26, .68.27, .68.28
Name
Negotiation; (VCM) Enable
Fibrepath on thie Port

FC-AL80;
FC-SW

(C) Common Serial Number; (D) Disable Queue Reset on


(UWN) Unique World Wide Unit Attention; (EAN) Enable
Auto Negotiation; (OS2007)
Name
Host SCSI Compliance
2007; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

FC-AL80;
FC-SW

(C) Common Serial Number; (D) Disable Queue Reset on


(UWN) Unique World Wide Unit Attention; (EAN) Enable
Auto Negotiation; (OS2007)
Name
Host SCSI Compliance
200772; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-3

FC-AL80;
FC-SW

(C) Common Serial Number; (D) Disable Queue Reset on


(UWN) Unique World Wide Unit Attention; (EAN) Enable
Auto Negotiation; (OS2007)
Name
Host SCSI Compliance
200772; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

FC-AL80;
FC-SW

(C) Common Serial Number; (D) Disable Queue Reset on


(UWN) Unique World Wide Unit Attention; (EAN) Enable
Name
Auto Negotiation; (PP)
Enable Point-to-point; (SCL)
Enable Sunapee; (VCM)
Enable Fibrepath on thie
Port

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

FC-AL80;
FC-SW

(C) Common Serial Number; (D) Disable Queue Reset on


(UWN) Unique World Wide Unit Attention; (OS2007)
Name
Host SCSI Compliance
200772, 98; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance74; (SPC-2)
SPC-2 compliance73, 96;
(VCM) Enable Fibrepath on
thie Port

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

FC-AL80;
FC-SW

(C) Common Serial Number; (EAN) Enable Auto


(UWN) Unique World Wide Negotiation; (OS2007) Host
Name
SCSI Compliance 200713, 72;
(PP) Enable Point-to-point;
(SC3) SCSI-3 compliance74;

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,

EMC
Symmetrix
DMX-3

Oracle Solaris 11: SPARC,


x86;
Oracle Solaris 9 SPARC

173

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris 9 SPARC

174

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris 9 SPARC

175

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

EMC
Symmetrix
VMAXe

EMC
Symmetrix
8000 Series

Oracle Solaris: 8 SPARC76,


77, 9 SPARC
176

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris: 8 SPARC76,
77, 9 SPARC

177

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris: 8 SPARC76,
77, 9 SPARC

178

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris: 8 SPARC76,
77, 9 SPARC

179

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris: 8 SPARC76,
77, 9 SPARC

180

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;
Oracle Solaris: 8 SPARC76,
77, 9 SPARC

181

Oracle Solaris 10: SPARC,


x8675;
Oracle Solaris 11: SPARC,
x86;

Director Bit/Flag Information

40

Director Bit/Flag Information


Oracle Solaris: 8 SPARC76,
77, 9 SPARC
182

Red Hat RHEL [32-Bit] 3.0:


U7 AS/ES39, 45, U8 AS/ES39,

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

FC-AL80

(C) Common Serial Number; (VCM) Enable Fibrepath on


thie Port
(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

FC-SW

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


(EAN) Enable Auto
thie Port
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

FC-SW

(C) Common Serial Number; (VCM) Enable Fibrepath on


(EAN) Enable Auto
thie Port
Negotiation; (PP) Enable
Point-to-point; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(OS2007) Host SCSI
Negotiation; (SPC-2) SPC-2 Compliance 2007; (SC3)

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,

EMC
Symmetrix:
DMX-3,

44;

Red Hat RHEL: [32-Bit] 3.9


AS/ES39, 43, [AMD-64] 3.0 U7
AS/ES39, [AMD-64] 3.0 U8
AS/ES39, [AMD-64] 3.9
AS/ES39, [EM64T] 3.0 U7
AS/ES39, [EM64T] 3.0 U8
AS/ES39, [EM64T] 3.9
AS/ES39, [IA64] 3.0 U7
AS/ES39, [IA64] 3.0 U8
AS/ES39, [IA64] 3.9 AS/ES39
185

Red Hat RHEL [32-Bit] 3.0:


U7 AS/ES39, 45, U8 AS/ES39,
44;

Red Hat RHEL: [32-Bit] 3.9


AS/ES39, 43, [AMD-64] 3.0 U7
AS/ES39, [AMD-64] 3.0 U8
AS/ES39, [AMD-64] 3.9
AS/ES39, [EM64T] 3.0 U7
AS/ES39, [EM64T] 3.0 U8
AS/ES39, [EM64T] 3.9
AS/ES39, [IA64] 3.0 U7
AS/ES39, [IA64] 3.0 U8
AS/ES39, [IA64] 3.9 AS/ES39
186

Red Hat RHEL [32-Bit] 3.0:


U7 AS/ES39, 45, U8 AS/ES39,
44;

Red Hat RHEL: [32-Bit] 3.9


AS/ES39, 43, [AMD-64] 3.0 U7
AS/ES39, [AMD-64] 3.0 U8
AS/ES39, [AMD-64] 3.9
AS/ES39, [EM64T] 3.0 U7
AS/ES39, [EM64T] 3.0 U8
AS/ES39, [EM64T] 3.9
AS/ES39, [IA64] 3.0 U7
AS/ES39, [IA64] 3.0 U8
AS/ES39, [IA64] 3.9 AS/ES39
187

Red Hat RHEL [32-Bit] 3.0:


U7 AS/ES39, 45, U8 AS/ES39,
44;
Red Hat RHEL: [32-Bit] 3.9
AS/ES39, 43, [AMD-64] 3.0 U7
AS/ES39, [AMD-64] 3.0 U8
AS/ES39, [AMD-64] 3.9
AS/ES39, [EM64T] 3.0 U7
AS/ES39, [EM64T] 3.0 U8
AS/ES39, [EM64T] 3.9
AS/ES39, [IA64] 3.0 U7
AS/ES39, [IA64] 3.0 U8
AS/ES39, [IA64] 3.9 AS/ES39

188

VMware ESX 3.569

EMC
Symmetrix:
DMX-3,
DMX-4

(C) Common Serial Number; (VCM) Enable Fibrepath on


thie Port
(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

Red Hat RHEL: [32-Bit] 3.9


AS/ES39, 43, [AMD-64] 3.0 U7
AS/ES39, [AMD-64] 3.0 U8
AS/ES39, [AMD-64] 3.9
AS/ES39, [EM64T] 3.0 U7
AS/ES39, [EM64T] 3.0 U8
AS/ES39, [EM64T] 3.9
AS/ES39, [IA64] 3.0 U7
AS/ES39, [IA64] 3.0 U8
AS/ES39, [IA64] 3.9 AS/ES39
Red Hat RHEL [32-Bit] 3.0:
U7 AS/ES39, 45, U8 AS/ES39,

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

FC-AL80

44;

184

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (SC3) SCSI-3
compliance; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

Red Hat RHEL: [32-Bit] 3.9


AS/ES39, 43, [AMD-64] 3.0 U7
AS/ES39, [AMD-64] 3.0 U8
AS/ES39, [AMD-64] 3.9
AS/ES39, [EM64T] 3.0 U7
AS/ES39, [EM64T] 3.0 U8
AS/ES39, [EM64T] 3.9
AS/ES39, [IA64] 3.0 U7
AS/ES39, [IA64] 3.0 U8
AS/ES39, [IA64] 3.9 AS/ES39
Red Hat RHEL [32-Bit] 3.0:
U7 AS/ES39, 45, U8 AS/ES39,

.112.120, .113.121, .114.121

FC-AL80

44;

183

(SPC-2) SPC-2
compliance14, 73; (VCM)
Enable Fibrepath on thie
Port

Director Bit/Flag Information

(OS2007) Host SCSI


Compliance 2007; (VCM)
Enable Fibrepath on thie
Port

41

Director Bit/Flag Information


compliance; (UWN) Unique
World Wide Name

SCSI-3 compliance

.100.91, .101.91, .103.93,


.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

DMX-4

189

VMware ESX 3.569

FC-AL80

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200713; (SC3)
SCSI-3 compliance

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

190

VMware ESX 3.569

FC-SW

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 2007; (SC3)
SCSI-3 compliance

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

191

VMware ESX 3.569

FC-SW

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7;


(OS2007) Host SCSI
Compliance 200713; (SC3)
SCSI-3 compliance

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

VMware ESX Server 2.5.569,

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance;
(EAN) Enable Auto
Negotiation; (SPC-2) SPC-2 (SPC-2) SPC-2 compliance
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance;
(EAN) Enable Auto
Negotiation; (SPC-2) SPC-2 (SPC-2) SPC-2 compliance
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

FC-AL80

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

71

FC-AL80;
FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(SPC-2) SPC-2 compliance (SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

VMware ESX Server 2.5.569,

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance;
Negotiation; (PP) Enable
(SPC-2) SPC-2 compliance
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

FC-SW

(C) Common Serial Number;


(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

(ACLX) Initiator Group7;


(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance
Negotiation; (SPC-2) SPC-2
compliance96; (UWN)
Unique World Wide Name

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance96;
(UWN) Unique World Wide

EMC Enginuity 5671: .31.35,


.32.36, .45.52, .48.56, .54.59,
.55.60, .58.64, .59.64, .60.65,
.65.69, .68.71, .69.71, .74.75,
.75.75, .80.77, .81.78, .82.78

EMC
Symmetrix
DMX/DMX-2

192

71

193

VMware ESX Server 2.5.569,


71

194

VMware ESX Server 2.5.569,


71

195

196

VMware ESX Server 2.5.569,

71

197

VMware ESX Server 2.5.569,


71

198

VMware ESX Server 2.5.569,


71

199

VMware ESX: 3.0.369, 70,


3.569, Server 2.5.569, 71;
VMware ESXi 3.569

200

VMware ESX: 3.0.369, 70,


3.569, Server 2.5.569, 71;
VMware ESXi 3.569

Director Bit/Flag Information

(ACLX) Initiator Group7;


(SC3) SCSI-3 compliance;
(SPC-2) SPC-2
compliance14

42

Director Bit/Flag Information


Name
201

VMware ESX: 3.0.369, 70,


3.569;

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance
(EAN) Enable Auto
Negotiation; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

FC-AL80;
FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(SPC-2) SPC-2 compliance (SC3) SCSI-3 compliance

EMC Enginuity 5567: .53.30,


.54.31, .55.32, .56.33

EMC
Symmetrix
8000 Series

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance
(EAN) Enable Auto
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5568: .61.23,


.62.23, .64.24, .65.25, .66.25,
.67.26, .68.27, .68.28

EMC
Symmetrix
8000 Series

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance;
(OS2007) Host SCSI
(SPC-2) SPC-2 compliance Compliance 2007

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94

EMC
Symmetrix
DMX-4

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance;
(OS2007) Host SCSI
(SPC-2) SPC-2 compliance Compliance 2007

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-3

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(SC3) SCSI-3 compliance;
Compliance 200713
(SPC-2) SPC-2
compliance14

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

(C) Common Serial Number; (ACLX) Initiator Group;


(OS2007) Host SCSI
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance Compliance 2007

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201; EMC Enginuity
5875: .135.91, .139.93,
.198.148, .231.172

EMC
Symmetrix
VMAX

(C) Common Serial Number; (ACLX) Initiator Group7;


(OS2007) Host SCSI
(SC3) SCSI-3 compliance;
(SPC-2) SPC-2 compliance Compliance 2007

EMC Enginuity 5773: .79.58,


.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix
DMX-4

VMware ESXi 3.569


202

VMware ESX: 3.0.369, 70,


3.569;

203

VMware ESX: 3.0.369, 70,


3.569;

VMware ESXi 3.569

VMware ESXi 3.569

204

FC-AL80;
VMware ESX: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69, FC-SW
93, 94, 105, 117, 118, 119, 120;
VMware ESXi: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120

205

FC-AL80;
VMware ESX: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69, FC-SW
93, 94, 105, 117, 118, 119, 120;
VMware ESXi: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120

206

VMware ESX: 4.0 (vSphere


4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120;

FC-AL80;
FC-SW

VMware ESXi: 4.0 (vSphere


4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120

207

FC-AL80;
VMware ESX: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69, FC-SW
93, 94, 105, 117, 118, 119, 120;
VMware ESXi: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120,
5.0 (vSphere 5)69, 93, 94, 105

208

FC-AL80;
VMware ESX: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69, FC-SW
93, 94, 105, 117, 118, 119, 120;
VMware ESXi: 4.0 (vSphere
4)69, 93, 94, 4.1 (vSphere 4)69,
93, 94, 105, 117, 118, 119, 120,
5.0 (vSphere 5)69, 93, 94, 105

209

VMware: ESX 3.0.369, 70,


ESXi 3.569

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(SC3) SCSI-3 compliance
(EAN) Enable Auto
Negotiation; (SPC-2) SPC-2
compliance; (UWN) Unique
World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

210

VMware: ESX 3.0.369, 70,


ESXi 3.569

FC-AL80

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance
Negotiation; (SPC-2) SPC-2
compliance14; (UWN)
Unique World Wide Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

211

VMware: ESX 3.0.369, 70,


ESXi 3.569

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance; (UWN)
Unique World Wide Name

EMC Enginuity 5772: .55.51,


.59.53, .83.75, .85.77, .88.80,
.91.83, .92.83, .92.84, .97.88,
.100.91, .101.91, .103.93,
.104.93, .105.94; EMC
Enginuity 5773: .79.58,
.123.83, .130.90, .134.94,
.138.96, .141.98, .155.107,
.160.111, .163.113, .167.115,
.168.115, .175.122

EMC
Symmetrix:
DMX-3,
DMX-4

212

VMware: ESX 3.0.369, 70,


ESXi 3.569

FC-SW

(C) Common Serial Number; (ACLX) Initiator Group7;


(EAN) Enable Auto
(SC3) SCSI-3 compliance
Negotiation; (PP) Enable
Point-to-point; (SPC-2)
SPC-2 compliance14;
(UWN) Unique World Wide
Name

EMC Enginuity 5771: .68.75,


.81.90, .83.92, .86.95, .87.95,
.91.99, .92.99, .94.102,
.95.103, .99.108, .100.108,
.104.114, .105.115, .111.119,
.112.120, .113.121, .114.121

EMC
Symmetrix
DMX-3

Director Bit/Flag Information

43

Director Bit/Flag Information


213

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.

18.
19.
20.
21.
22.
23.
24.

25.
26.
27.
28.

29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.

40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.

VMware: ESX 3.569, ESXi


3.569

FC-AL80;
FC-SW

(C) Common Serial Number; (OS2007) Host SCSI


(SPC-2) SPC-2 compliance Compliance 2007; (SC3)
SCSI-3 compliance

EMC Enginuity 5874:


.121.102, .122.103, .123.104,
.157.129, .207.166, .210.168,
.229.182, .230.183, .240.191,
.241.191, .242.191, .248.194,
.259.201

EMC
Symmetrix
VMAX

Supported kernels: 2.6.27.19-5.1, 2.6.27.21-0.1.2, 2.6.27.23-0.1, 2.6.27.25-0.1.1 2.6.27.29-0.1.1, 2.6.27.37-0.1.1, 2.6.27.39-0.3.1, 2.6.27.42-0.1.1, 2.6.27.45-0.1.1,
2.6.27.48-0.1.1, 2.6.27.48-0.6.1, 2.6.27.48-0.12.1, 2.6.27.54-0.2.1. Confirm kernel support with server vendor.
D Bit with Cluster
NetWare NSS has 256 LUN per port limitation. If NSS will not be used, 128 LUNs is supported.
PowerPath is not supported in conjunction with host-based mirroring.
Shared HBA environments between disk and tape/tape libraries are not supported for Novell.
Maximum number of NWFS volumes that can be mounted is 64.
Required when ports are shared among multiple initiators.
Supported kernel: 2.6.18-128.0.0.0.2.el5, 2.6.18-128.1.1.0.1.el5, 2.6.18-128.1.6.0.1.el5, 2.6.18-128.1.10.0.1.el5, 2.6.18-128.1.14.0.1.el5, 2.6.18-128.1.16.0.1.el5,
2.6.18-128.2.1.0.1.el5, 2.6.18-128.4.1.0.1.el5, 2.6.18-128.7.1.0.1.el5. Confirm kernel support with server vendor.
Support kernel: 2.6.9-78.8AXS2. Contact server vendor for support.
Asianux 2.0 SP3 include Redflag DC Server 5.0 SP3, Miracle Linux v4.0 SP3, HanCom 2006 Server Asianux 2.0 SP3.
Supported kernels: 2.6.18-128.el5, 2.6.18-128.1.1.el5, 2.6.18-128.1.6.el5, 2.6.18-128.1.10.el5, 2.6.18-128.1.14.el5, 2.6.18-128.1.16.el5, 2.6.18-128.2.1.el5, 2.6.18-128.4.1.el5,
2.6.18-128.7.1.el5, 2.6.18-128.17.1.el5, 2.6.18-128.23.1.el5, 2.6.18-128.23.2.el5, 2.6.18-128.26.1.el5. Confirm kernel support with server vendor.
C Bit required for VERITAS VxVM DMP functionality.
The OS2007 director bit is available for support in the 5771 microcode version beginning with the 5771.104.114 release
The SPC-2 director bit is available for support in 5771 microcode version beginning with the 5771.87.95 release.
AIX 5.1 has reached End of Service (EOS) April 2006. After this date, AIX 5.1 will only be supported for customers that have purchased a "Fee Based Service Extension" contract
from IBM.
AIX 5.1 has reached End of Service (EOS) April 2006. After this date, AIX 5.1 will only be supported for customers that have purchased a "Fee Based Service Extension" contract
from BULL.
In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All
SLES 9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require an
extended support contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August
31, 2014.
Supported kernels: 2.6.5-7.308, 2.6.5-7.311, 2.6.5-7.312, 2.6.5-7.314, 2.6.5-7.315, 2.6.5-7.316, 2.6.5-7.317, 2.6.5-7.318, 2.6.5-7.319, 2.6.5-7.321, 2.6.5-7.322, 2.6.5-7.323,
2.6.5-7.324, 2.6.5-7.325. The 32bit kernel 2.6.5-7.311 is not supported with PowerPath 5.1 SP1. Confirm kernel support with server vendor.
Supported kernels: 2.6.5-7.244, 2.6.5-7.252, 2.6.5-7.257, 2.6.5-7.267, 2.6.5-7.276, 2.6.5-7.282, 2.6.5-7.283, 2.6.5-7.286, 2.6.5-7.287.3.
Confirm kernel support with server vendor.
Novell OES is supported on kernels 2.6.5-7.244, 2.6.5-7.252, 2.6.5-7.257, 2.6.5-7.267, 2.6.5-7.276, 2.6.5-7.282, 2.6.5-7.283, 2.6.5-7.286, 2.6.5-7.287.3, and 2.6.5-7.308 with
EMC PowerPath only.
Novell OES is only supported with Fibre channel connectivity.
Novell OES 2 is supported with Linux native MPIO or via RPQ for EMC PowerPath.
Novell OES 2 SP1 is supported with this update.
Supported kernels: 2.6.16.21-0.8, 2.6.16.21-0.15, 2.6.16.21-0.25, 2.6.16.27-0.6, 2.6.16.27-0.9.
Confirm kernel support with server vendor.
PowerPath 5.0 support begins with kernel 2.6.16.27-0.6.
Supported kernels: 2.6.16.46-0.12, 2.6.16.46-0.14, 2.6.16.53-0.8, 2.6.16.53-0.16, 2.6.16.54-0.2.3, 2.6.16.54-0.2.5, 2.6.16.54-0.2.8. Confirm kernel support with server vendor.
EMC supports the following filesystems: ext2, ext3, reiserfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please submit an
RPQ.
PowerPath is not available or supported.
Supported kernels: 2.6.16.60-0.21, 2.6.16.60-0.23, 2.6.16.60-0.27, 2.6.16.60-0.30, 2.6.16.60-0.31, 2.6.16.60-0.33, 2.6.16.60-0.34, 2.6.16.60-0.35, 2.6.16.60-0.37,
2.6.16.60-0.39.3, 2.6.16.60-0.42.4, 2.6.16.60-0.42.5, 2.6.16.60-0.42.7, 2.6.16.60-0.42.8, 2.6.16.60-0.42.9, 2.6.16.60-0.42.10, 2.6.16.60-0.42.11. Confirm kernel support with
server vendor.
Supported kernels: 2.6.9-22.EL, 2.6.9-22.0.2.EL.
Confirm kernel support with server vendor.
Native multipathing is not supported on boot-from-SAN configurations.
Suported kernels: 2.6.9-34.EL, 2.6.9-34.0.1.EL, 2.6.9-34.0.2.EL.
Confirm kernel support with server vendor.
Supported kernels: 2.6.9-42.EL, 2.6.9-42.0.2.EL, 2.6.9-42.0.3.EL.
Confirm kernel support with server vendor.
Supported kernels: 2.6.9-55.EL, 2.6.9-55.0.2.EL., 2.6.9-55.0.6.EL, 2.6.9-55.0.9.EL, 2.6.9-55.0.12.EL, 2.6.9-55.0.14.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.9-67.EL, 2.6.9-67.0.1.EL, 2.6.9-67.0.4.EL, 2.6.9-67.0.7.EL, 2.6.9-67.0.15.EL, 2.6.9-67.0.20.EL, 2.6.9-67.0.22.EL. Confirm kernel support with server
vendor.
Supported kernels: 2.6.9-78.EL, 2.6.9-78.0.1.EL, 2.6.9-78.0.5.EL, 2.6.9-78.0.8.EL, 2.6.9-78.0.13.EL, 2.6.9-78.0.17.EL, 2.6.9-78.0.22.EL, 2.6.9-78.0.24, 2.6.9-78.0.31.EL,
2.6.9-78.0.32.EL, 2.6.9-78.0.33.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.18-8.EL5, 2.6.18-8.1.1.EL5, 2.6.18-8.1.3.EL5, 2.6.18-8.1.4.EL5, 2.6.18-8.1.6.EL5, 2.6.18-8.1.8.EL5, 2.6.18-8.1.10.EL5, 2.6.18-8.1.14.EL5, and
2.6.18-8.1.15.el5. Confirm kernel support with server vendor.
Supported kernels: 2.6.18-53.el5, 2.6.18-53.1.4.el5, 2.6.18-53.1.6.el5, 2.6.18-53.1.13.el5, 2.6.18-53.1.14.el5, 2.6.18-53.1.19.el5, 2.6.18-53.1.21.el5. Confirm kernel support with
server vendor.
Supported kernels: 2.6.18-92.el5, 2.6.18-92.1.1.el5, 2.6.18-92.1.6.el5, 2.6.18-92.1.10.el5, 2.6.18-92.1.13.el5, 2.6.18-92.1.17.el5, 2.6.18-92.1.18.el5,2.6.18-92.1.22.el5,
2.6.18-92.1.24.el5, 2.6.18-92.1.26.el5. Confirm kernel support with server vendor.
In accordance with the Red Hat Enterprise Linux Errata Support Policy, the regular 7 year life-cycle of Red Hat Enterprise Linux 3 will end on October 31, 2010. All RHEL 3
configurations in the ESM will be frozen as of the publication of the October 2010 ESM. At this time, Red Hat Enterprise Linux 3 will no longer be publicly supported and will
require an extended support contract from Red Hat in order for the RHEL 3 configuration in the ESM to be supported by EMC.
Supported kernels: 2.6.9-42.EL, 2.6.9-42.0.2.EL, 2.6.9-42.0.3.EL, 2.6.9-42.0.8.EL, 2.6.9-42.0.10.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.9-34.EL, 2.6.9-34.0.1.EL, 2.6.9-34.0.2.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.9-22.EL, 2.6.9-22.0.1.EL, 2.6.9-22.0.2.EL. Confirm kernel support with server vendor.
Supported kernels: 2.4.21-50.EL, 2.4.21-51.EL, 2.4.21-52.EL, 2.4.21-53.EL, 2.4.21-57.EL, 2.4.21-58.EL, 2.4.21-63.EL, 2.4.21-66.EL. Confirm kernel support with server vendor.
Supported kernels: 2.4.21-47.EL, 2.4.21-47.0.1.EL. Confirm support with server vendor.
Supported kernels: 2.4.21-40.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.18-8.10AX. Confirm kernel support with server vendor.
Includes Redflag DC Server, Miracle Linux and HanCom Asianux Server.
Supported kernel 2.6.18-53.11AXS3, 2.6.18-53.19AXS3. Confirm kernel support with server vendor.
Asianux 2.0 SP2 include Redflag DC Server 5.0 SP2, Miracle Linux v4.0 SP2, HanCom 2006 Server Asianux Server 2.0 SP2.
Supported kernels: 2.6.9-42.7AX.
Confirm kernel support with server vendor.
Asianux 2.0 SP1 include Redflag DC Server 5.0 SP1, Miracle Linux v4.0 SP1, HanCom 2006 Server Asianux Server 2.0 SP1.
Kernels supported: 2.6.9-34.21AX.
Confirm kernel support with server vendor.
Support kernel: 2.6.9-42.7AX. Contact server vendor for support.
Novell OES is supported with EMC PowerPath only.
Supported kernels: 2.6.9-11.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.9-5.EL, 2.6.9-5.0.5.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.9-11.19AX.
Confirm kernel support with server vendor.
Asianux 2.0 GA include Redflag DC Server 5.0 GA, Miracle Linux v4.0 GA, HanCom 2006 Server Asianux Server 2.0.

Director Bit/Flag Information

44

Director Bit/Flag Information

60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.

86.
87.

88.
89.
90.
91.

92.

93.
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.
110.
111.
112.
113.
114.
115.
116.
117.
118.
119.

120.
121.
122.

Supported kernels: 2.6.9-11.25AX.


Confirm kernel support with server vendor.
Support kernels: 2.4.21-9.30AX, 2.4.21-9.38AX. Confirm kernel version with server vendor.
Asianux 1.0 GA include Red Flag DC Server 4.1 GA, MIRACLE LINUX V3.0 GA.
Asianux 1.0 GA include Red Flag DC Server 4.1 GA, Miracle Linux MLSE 3.0 GA.
Support kernels: 2.4.21-20.19AX, 2.4.21-20.29AX. Confirm kernel version with server vendor.
Support kernels: 2.4.21-37.18AX. Confirm kernel version with server vendor.
Asianux 1.0 SP2 includes Red Flag DC Server 4.1 SP2,Miracle Linux v3.0 SP2, HanCom Linux 2005 Server Asianux Inside SP2.
Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, HanCom Linux 2005 Server Asianux Inside SP3.
Support kernels: 2.4.21-47.22AX. Confirm kernel version with server vendor.
Support kernel: 2.4.21-15.12AX. Contact server vendor for support.
For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to
the Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf
For details on Microsoft Cluster Services (MSCS) support with Windows guest operating systems, refer to the Storage/SAN Compatibility Guide For ESX Server 3.x on
www.vmware.com.
For details on Microsoft Cluster Services (MSCS) support with Windows guest operating systems, refer to the "SAN Compatibility Guide For ESX Server 2.x" at
http://www.vmware.com/pdf/esx_SAN_guide.pdf
Enable the OS2007 flag will cause Solaris host to log the Unit Attention event when LUNs on the FA port change. This behavior is expected and not harm to any applications.
Migration from SPC2 clear to SPC2 set for existing utilized volumes by VxVM may require special procedure.
SC3 flag can only be optionally set if SPC2 is also set
EMC supports ZFS in Solaris 10_x86 11/06 (update 3) or later. The Snapshot and Clone features of ZFS are supported only through Sun Microsystems.
Oracle Solaris 8 Sparc configurations will be removed from the ESM by 3/1/2012.
Existing Solaris 8 configurations are frozen due to Solaris 8 entering Phase II of its End of Support Life (EOSL) cycle. Customers should review the E-Lab Navigator Extended
Solutions Tab for the most recent Letter of Support which offers limited support for configurations not listed in the ESM.
5.1B-2=5.1B PK4.
5.1B-4=5.1B PK6. (T64V51BB27AS0006-20061208.tar)
Direct connect only, no hubs.
Supported kernels: 2.6.32-71.el6, 2.6.32-71.7.1.el6, 2.6.32-71.14.1.el6, 2.6.32-71.18.1.el6, 2.6.32-71.18.2.el6, 2.6.32-71.24.1.el6, 2.6.32-71.31.1.el6, 2.6.32-71.34.1.el6. Confirm
kernel support with server vendor.
Supported kernels: 2.6.18-194.1.AXS3, 2.6.18-194.2.AXS3, 2.6.18-194.3.AXS3, 2.6.18-194.4.AXS3, 2.6.18-194.5.AXS3, 2.6.18-194.7.AXS3, 2.6.18-194.8.AXS3,
2.6.18-194.9.AXS3, 2.6.18-194.10.AX3. Confirm kernel support with server vendor.
Supported kernels: 2.6.32.12-0.7, 2.6.32.13-0.4.1, 2.6.32.13-0.5.1, 2.6.32.19-0.2.1, 2.6.32.19-0.3.1, 2.6.32.23-0.3.1, 2.6.32.24-0.2, 2.6.32.27-0.2.2, 2.6.32.29-0.3.1,
2.6.32.36-0.5.2, 2.6.32.43-0.4.1, 2.6.32.45-0.3.2, 2.6.32.46-0.3.1. Confirm kernel support with server vendor.
Supported kernels: 2.6.18-194.el5, 2.6.18-194.3.1.el5, 2.6.18-194.8.1.el5, 2.6.18-194.11.1.el5, 2.6.18-194.11.3.el5, 2.6.18-194.11.4.el5, 2.6.18-194.17.1.el5, 2.6.18-194.17.4.el5,
2.6.18-194.26.1.el5, 2.6.18-194.32.1.el5 Confirm kernel support with server vendor.
Supported kernels: 2.6.18-194.0.0.0.3.el5, 2.6.18-194.0.0.0.4.el5, 2.6.18-194.3.1.0.1.el5, 2.6.18-194.3.1.0.2.el5, 2.6.18-194.11.4.0.1.el5, 2.6.18-194.8.1.0.1.el5,
2.6.18-194.11.1.0.1.el5, 2.6.18-194.11.3.0.1.el5, 2.6.18-194.11.4.0.1.el5, 2.6.18-194.17.1.0.1.el5, 2.6.18-194.17.1.0.2.el5, 2.6.18-194.17.4.0.1.el5, 2.6.18-194.26.1.0.1.el5,
2.6.18-194.32.1.0.1.el5. Confirm kernel support with server vendor.
Supported kernels: 2.6.18-164.0.0.0.1.el5, 2.6.18-164.2.1.0.1.el5, 2.6.18-164.6.1.0.1.el5, 2.6.18-164.9.1.0.1.el5, 2.6.18-164.10.1.0.1.el5, 2.6.18-164.11.1.0.1.el5,
2.6.18-164.15.1.0.1.el5. Confirm kernel support with server vendor.
Supported kernels: 2.6.16.60-0.54.5, 2.6.16.60-0.57.1, 2.6.16.60-0.58.1, 2.6.16.60-0.59.1, 2.6.16.60-0.60.1, 2.6.16.60-0.62.1, 2.6.16.60-0.66.1, 2.6.16.60-0.67.1,
2.6.16.60-0.68.1, 2.6.16.60-0.69.1, 2.6.16.60-0.74.7, 2.6.16.60-0.76.8, 2.6.16.60-0.77.1, 2.6.16.60-0.79.1, 2.6.16.60-0.81.2, 2.6.16.60-0.83.2. Confirm kernel support with server
vendor.
Novell OES 2 SP2 is supported with this update.
Novell OES 2 SP3 is supported with this update.
Supported kernels: 2.6.18-164.el5, 2.6.18-164.2.1.el5, 2.6.18-164.6.1.el5, 2.6.18-164.9.1.el5, 2.6.18-164.10.1.el5, 2.6.18-164.11.1.el5, 2.6.18-164.15.1.el5, 2.6.18-164.17.1.el5,
2.6.18-164.25.1.el5, 2.6.18-164.25.2.el5. Confirm kernel support with server vendor.
Supported kernel : 2.6.9-89.0.0.0.1.EL, 2.6.9-89.0.3.0.1.EL, 2.6.9-89.0.7.0.1.EL, 2.6.9-89.0.9.0.1.EL, 2.6.9-89.0.11.0.1.EL, 2.6.9-89.0.15.0.1.EL, 2.6.9-89.0.16.0.1.EL,
2.6.9-89.0.18.0.1.EL, 2.6.9-89.0.19.0.1.EL, 2.6.9-89.0.20.0.1.EL, 2.6.9-89.0.20.0.2.EL, 2.6.9-89.0.23.0.1.EL, 2.6.9-89.0.25.0.1.EL, 2.6.9-89.0.26.0.1.EL, 2.6.9-89.0.28.0.1.EL,
2.6.9-89.0.29.0.1.EL, 2.6.9-89.29.1.0.1.EL, 2.6.9-89.31.1.0.1.EL, 2.6.9-89.33.1.0.1.EL 2.6.9-89.35.1.0.1.EL. Confirm kernel support with server vendor.
Supported kernels: 2.6.9-89.EL, 2.6.9-89.0.3.EL, 2.6.9-89.0.7.EL, 2.6.9-89.0.9EL, 2.6.9-89.0.11.EL, 2.6.9-89.0.15.EL, 2.6.9-89.0.16.EL, 2.6.9-89.0.18.EL, 2.6.9-89.0.19.EL,
2.6.9-89.0.20.EL, 2.6.9-89.0.23.EL, 2.6.9-89.0.25.EL, 2.6.9-89.0.26.EL, 2.6.9-89.0.28.EL, 2.6.9-89.0.29.EL, 2.6.9-89.29.1.EL, 2.6.9-89.31.1.EL, 2.6.9-89.33.1.EL,
2.6.9-89.35.1.EL. Confirm kernel support with server vendor.
For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please refer
to the Storage/SAN section of the VMware Hardware Compatibility Guide athttp://www.vmware.com/resources/compatibility/search.php.
EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.
FC-AL topology supported with direct attach only.
The SPC2 director bit is available for support in the 5671 microcode version beginning with the 5671.58.64 release.
This director bit setting is valid only for Parallel SCSI connection
The OS2007 director bit is available for support in the 5671 microcode version beginning with the 5671.68.71 release.
HP-UX 11iv3 (HP-UX 11.31) supported with 5671 microcode version beginning with the 5671.58.64 release.
Recommended to enable os07 for HP-UX 11iv3 (HP-UX 11.31) initiators, refer to EMC HP-UX Host Connectivity Guide.
HP-UX 11iv3 (HP-UX 11.31) supported with 5771 microcode version beginning with the 5771.87.95 release.
Supported kernels: 2.6.18-274.0.0.0.1.el5. Confirm kernel support with server vendor.
Supported kernels: 2.6.32-100.34.1.el6uek. Confirm kernel support with server vendor.
Supported kernels: 2.6.32-200.13.1.el5uek. Confirm kernel support with server vendor.
All released updates to ESX Server version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific
server.
Supported kernels: 2.6.32-100.28.1.el6, 2.6.32-100.28.9.el6, 2.6.32-100.28.11.el6, 2.6.32-100.28.15.el6, 2.6.32-100.28.17.el6, 2.6.32-100.35.1.el6uek. Confirm kernel
support with server vendor.
Supported kernels: 2.6.32-100.28.1.el5, 2.6.32-100.28.9.el5, 2.6.32-100.28.11.el5, 2.6.32-100.28.15.el5; 2.6.32-100.28.17.el5, 2.6.32-100.35.1.el5uek. Confirm kernel support
with server vendor.
Supported kernels: 2.6.18-274.el5, 2.6.18-274.3.1el5, 2.6.18-274.7.1.el5. Confirm kernel support with server vendor.
Supported kernels: 2.6.18-238.0.1.el5, 2.6.18-238.1.1.0.1.el5, 2.6.18-238.5.1.0.1.el5, 2.6.18-238.9.1.0.1.el5, 2.6.18-238.12.1.0.1.el5. Confirm kernel support with server vendor.
Supported kernels: 2.6.32-131.0.15.el6, 2.6.32-131.2.1.el6, 2.6.32-131.6.1.el6, 2.6.32-131.12.1.el6, 2.6.32-131.17.1.el6. Confirm kernel support with server vendor.
Supported kernels: 2.6.32-71.7.1.el6, 2.6.32-71.14.1.el6, 2.6.32-71.18.1.el6, 2.6.32-71.18.2.el6. Confirm kernel support with server vendor.
Supported kernels: 2.6.16.60-0.85.1, 2.6.16.60-0.87.1, 2.6.16.60-0.89.1, 2.6.16.60-0.91.1. Confirm kernel support with server vendor.
SLES Xen kernel supported. Refer to the Virtualiztion Hosting Server (Parent) Solutions table for supported configurations.
EMC supports the following filesystems: ext2, ext3, ext4, xfs, and gfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please
submit an RPQ.
Supported kernels: 2.6.18-238.el5, 2.6.18-238.1.1.el5, 2.6.18-238.5.1.el5, 2.6.18-238.9.1.el5, 2.6.18-238.12.1.el5, 2.6.18-238.19.1.el5, 2.6.18-238.21.1.el5, 2.6.18-238.28.1.el5.
Confirm kernel support with server vendor.
Supported kernels: 2.6.9-100.EL; 2.6.9-101.EL. Confirm kernel support with server vendor.
Supported with vMotion.
Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer to
http://vmware.com/support/policies/oracle-support.html
Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes)
configurations. VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.
The following SCSI Controllers are supported with VMWare and MSCS:
Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.
You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.
Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer to
http://www.vmware.com/solutions/partners/alliances/oracle.html.
Starting with 5874.249.195.7 (defined in opt 351117) configurations that require AS400 or IBM i device (2107-Axx) mapping to a Symmetrix host adapter can be mixed on the port
or on the processor with open systems Gatekeeper devices. The preferred configuration method is to use the port flag ACLX with required device masking.
Prior to 5874.249.195.7, an RPQ is required for open systems Gatekeeper devices to be mixed on the same processor with AS400/IBM i devices.

Director Bit/Flag Information

45

Director Bit/Flag Information


123.
124.
125.
126.
127.
128.

Requires IBM PTF MF42315.


For IBM Performance Tools for IBM i, PTFs SI38651 & SI38842 are required.
Requires IBM PTFs MF47831 and MF47866.
Supported kernel : 2.6.9-100.0.0.0.1.EL. Confirm kernel support with server vendor.
5.1B-5=5.1B PK7. (T64V51BB28AS0007-20090312.tar)
5.1B-6=5.1B PK8. (T64V51BB29AS0008-20100821.tar)

Return To Top

December 2011 ESM

Director Bit/Flag Information

46

You might also like