Professional Documents
Culture Documents
1. DEMU installation Connect the communication to the front panel of DEMU board. 2. DDF installation 04047251 alarm cable patching: We will use the 1,2,7,8,9,10,11,12,13,14,15 cores of the 04047251 cable for dry contact digital alarms.
4047251 Single Cable,Alarm Input Signal Cable,10.0m,D68MIV,CC32P0.4P430U(S )-I,BTS3012
04047252 alarm cable connect to DMLC port AIN. We will use smoke, temperature, humidity, water 4 sensor on the cable only.
4047252 Single Cable,Analog Signal And Dedicated Signal Cable,10.0m,D44MI,CC16P0.4P430U(S)I,BTS3012
The connection description in DDF box of alarm cable and sensor cable:
Cable
Cores 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Color White Blue White Orang e White Green White Brown White Grey Red Blue Red Orang e Red Greed Red Brown Red Grey Black Blue Black Orang e Black Green Black Brown Black Grey Color Back Orang e Red Brown Red Gray Black
Sensor Cable
Alarm Door Fire Panel Disable Disable Disable Disable System on battery Rectifier Fault Tower light Wapda Failure Genset in Operation Genset Low Fuel Air Con Failure Battery Low voltage Genset Failure
DDF Port DDF Port 1 DDF Port 2 smoke Over tem Over hum water DDF Port 3 DDF Port 4 DDF Port 5 DDF Port 6 DDF Port 7 DDF Port 8 DDF Port 9 DDF Port 10 DDF Port 11 DDF Port DDF Port 12
Cable
51040472
Cores 1
Sensor Cable
0404725
2 3 4
DDF Port 16
3. DMLC installation 04047251 alarm cable connect to DMLC port SWIN; 04047252 alarm cable connect to DMLC port AIN.
Printscreen SWIN
Type MD68 female connector DB15 female connector DB44 female connector
BOM Code of the Cable 4047251 Single Cable,Alarm Input Signal Cable,10.0m,D68MIV,CC32P0.4P430U(S)-I,BTS3012 4047250 Single Cable,Boolean Value Output Signal Cable,10.0m,D15MI,CC8P0.4P430U(S)-I,BTS3012 4047252 Single Cable,Analog Signal And Dedicated Signal Cable,10.0m,D44MI,CC16P0.4P430U(S)-I,BTS3012
SWOUT
AIN
4 analog inputs, smoke/water/door access control/infrared/tem perature and humidity sensor signal input
Warning: 1.when you are patching the sensor cable in DDF box, please take care on the 04047252 cable, do not do any loop test and crossing patching, it will burn the DEMU board. 2.Use the black tape to insulate to all un-used alarm core, to protect our DEMU from burning. 3.First finish the patching in DDF box for all alarms, and check, then connect the alarm cable to DMLC port.