Professional Documents
Culture Documents
SCAFFOLDING
Specifications for:
1. > 3 years Bamboo Standards & Members Diameter Thickness Bamboo 1st Ledgers > 75mm > 10mm 2. Straight and 3. free from cracks, gnarls, irregular knots, dry rot, wormeaten spots and other defects
Diameter
Thickness
> 75mm
> 10mm external diameter found along the bamboo member
Bamboo Other Ledgers & Braces Diameter Thickness > 40mm > 10mm
SCAFFOLDING
<1.5m
SCAFFOLDING
Nylon Strips
for knotting bamboo members ultimate strength nominal width nominal thickness Overlapping posts/standards ledgers/braces/rakers distance between two knottings on the overlapping portion of the bamboo members 1.5~2m >2m <300mm > 50 Kgf 5.5~6.0mm 0.85~1.0mm 1. All knots should be tightened with at least 5 rounds of nylon strips (tight & secure)
2. The ends of the nylon strips should be crossed and twisted to form a single twisted end which passes through the knot twice to give one round turn for proper anchorage
1. any two of members should be tied up first and then the remaining one should be tied up on top of them 2. tail of one bamboo member should be connected to the head of the other
SCAFFOLDING
Overlapping
SCAFFOLDING
Erecting
bottom level to top level interior part to exterior part < 1 storey if on top of a building
cantilever portion at top should be properly tied and secured against wind
Dismantling
SCAFFOLDING
Guard-rails and toe-boards When persons are liable to fall from height Top guard-rail between 900mm and 1,150mm above the platform
between 450mm and 600mm above the platform 2 horizontal bamboo members spaced at intervals between 750mm to 900mm
Toe-board
SCAFFOLDING
Working Platform shall be not less than 400mm in width
1. straight-grained 2. free from irregular knots, dry rot, worm holes, cracks & other defects affecting its strength
OR
> 150mm in width > 50mm in thickness Every board or plank Shall not protrude beyond its end support to more than 150mm Rest on at least 3 supports to prevent undue or unequal sagging
SCAFFOLDING
SCAFFOLDING
Number of Working Platforms For a scaffold less than 15m in height: < 2 working platforms for light duty purpose < 1 working platform for heavy duty purpose
SCAFFOLDING
Safety Belt -if it is impractical to provide safety net -last resort for fall prevention -attached to a secure anchorage point or an independent lifeline
SCAFFOLDING
40mm
110mm
10mm
SCAFFOLDING
SCAFFOLDING
Knotting
1 2 3 4 5 6
The ends of the rope should be crossed & twisted and pass through the knot twice
SCAFFOLDING
Working platform 510mm Width > 400mm
SCAFFOLDING
NO Guard Rail
SCAFFOLDING
Pointed ends should not be allowed for both ledgers & posts