Professional Documents
Culture Documents
Objectives
Describe the available options for programming a PLC. Explain what online is in comparison to offline. List the advantages of software programming with a personal computer over a hand-held programming terminal. Explain the differences when interfacing a notebook personal computer to a PLC. Discuss open or soft PLC programming. Provide an overview of the IEC 1131-3 standard.
PLC Programming
The oldest programming method is the handheld programmer. Most popular programming method is IBMcompatible personal computer using either DOS or Windows software. Higher-end PLCs can only be programmed using software.
Node Addresses
Each device on the network will require a unique identifier called a node or station address. Data highway plus network will support up to 64 nodes, using octal addresses. Data highway-485 network will support up to 32 nodes, using decimal addresses.
Industrial Computers
Notebook and desktop personal computers were not designed for continuous use in the manufacturing environment.
Rack-mount
Computer either separate component mounted in standard 19-inch rack or embedded inside enclosure Separate monitor or touchscreen display
Programming languages, Part 3 of the 11313 standard, have attracted the most attention internationally.