Professional Documents
Culture Documents
By:Saiesh P.Phaldesai 1st year M-Pharma Pharmaceutics Srinivas college of pharmacy Mangalore
CONTENTS
Solubilization. Surfactant and its importance. Temperature. pH. Cosolvency. Solid dispersion. -Cyclodextrin drug dispersion technique. References.
SOLUBILIZATION
Solubilization an important property of association colloids in solution is an ability of the micelles to increase the solubility of material that normally insoluble or only slightly soluble in the dispersion medium used this phenomenon known as Solubilization.
SOLUBILITY ANALYSIS
Ionization constant (pKa) Can be calculated by Henderson Hasselbach equationFor acidic drugs.pH= pKa+ log [ionized drug]/ [unionized drug] For basic drugspH=pKa+ log [unionized drug]/ [ionized drug] E.g. Aspirin (pKa-3.5)
PH SOLUBILITY PROFILE
The solubility of acidic or basic drug will show differences in solubility with changes in pH. The solubility of an acidic or basic drug depends on the pKa of the ionizing functional group and the intrinsic solubilities for both the ionized and unionized forms. The relationship between solubility of the acidic drug and pH is given by the equation pH= pKa +log [Cs]/[Ca] Where pKa =negative logarithm of the ionization constant of the acid [Cs]= molar concentration of the salt form in water [Ca ] = molar concentration of free acid in water
Knowing the pKa , [Ca ],and pH total amt. of the drug solubilized in the water can be calculated Total solubility of the weak acid St is given by St =[Ca] +[Cs] equation for the weak bases is St =[Cb] +[Cs]
PARTITION COEFFICIENT
It is an ratio of Unionized drug distributed between organic & aqueous phase at equilibrium. Po/w = (Coil/Cwater)equilibrium Partition Coefficient study is useful in the A.D.M.E
DISSOLUTION
It is controlled by several physicochemical properties- chemical form, crystal habit, particle size, solubility, surface area and wetting properties. Noyes-Whitney eqn. dC / dt= AD (Cs-C)/hV Where, dC = Dissolution rate dT A = surface area of dissolving solid D = diffusion coefficient H = diffusion layer thickness C = solute concentration in the bulk medium V = volume of dissolution medium Cs = solute concentration in diffusion layer
add glycerol,
Addition of complexing agent Described as shown in the equation n [D] +m [L] [Dn: Lm ]s where:[D]=conc. Of the drug in the solution [L] =Conc. Of ligand in the solution [Dn: Lm]=Conc. Of the drug ligand complex E .g= solubility of benzocaine in caffeine
Apparent Solubility of Hexaethylmelamine is increased much as 90 fold via complexation with the Gentisate ion
SURFACTANT
Surfactants are wetting agents that lower the surface tension of a liquid, allowing easier spreading, and lower the interfacial tension between two liquids Classification
Ionic
Cetyl trimethylammonium bromide (CTAB) a.k.a. hexadecyl trimethyl ammonium bromide, and other alkyltrimethylammonium salts Cetylpyridinium chloride (CPC)
Nonionic Alkyl poly(ethylene oxide) Copolymers of poly(ethylene oxide) and poly(propylene oxide) (commercially called Poloxamers or Poloxamines)
HLB SCALE
Griffin an arbitrary scale of value to serve insure of hydrophilic lipophilic balance of surface active agent The higher the HLB of the an agent, the more hydrophilic it is The spans, sorbitan ester are lipophilic and have low HLB value (1.8-8.6) Tweens, polyoxyethylene derivative of the spans are hydrophilic and have high HLB value (9.6-16.7)
HLB SCALE
0
3
6
Most antifoaming agents W/O Emulsifying agents Wetting and Spreading agents
9
12
15
18
The HLB of non ionic surfactant whose only hydrophilic portion is polyoxyethylene is calculated using the formula HLB = E/5 Where, E = Percentage weight of ethylene oxide A number polyhydric alcohol fatty acid ester, such as glyceryl monostearate may be estimated by using the formula HLB = 20( 1- S/A) Where, S = saponification number of ester A = acid number of fatty acid
The HLB of polyoxyethylene sorbitan monolaurate (tween 20) for S = 45.5 and A = 276 HLB = 20( 1- 45.5/276) = 16.7
IMPORTANCE OF SURFACTANT
Surfactants play an important role in many practical applications and products, including: Detergents Fabric softener Emulsifiers Paints Adhesives Inks Soil remediation Wetting
Quantum dot coating Biocides (Sanitizers) Hair Conditioners (after shampoo) Spermicide (Nonoxynol 9)
Herbicides Insecticides
PH
PH SCALE
0 Acidic
Neutral
14
basic
APPLICATION OF PH
Sodium salicylate ppt as salicylic acid when acidified Vitamins are stable only with in a narrow pH range
Insulin ppt from aqueous solution between pH 5.0 and 6.0
Increasing stability
Improving purity
Formulation
syrup Elixir syrup
pH
5-7.2 7.0 2.5-3.0
Vitamin Bcomplex
Elixir
4.0-5.0
Optimizing biological activity Pepsin as maximum activity at pH 1.5 Comforting the body Storage of product
TEMPERATURE EFFECT
The heat of solution Hs represent the heat released or absorbed when a mole of solute is dissolved in larger quality of solvent. Most commonly solution process is endothermic i.e. Hs is +ve & thus increasing the temperature solution, thereby solubility. for such solute such as lithium chloride & other hydrochloride salt that are ionised when dissolved, the process is exothermic or Hs is ve.
COSOLVENCY
Introduction to Cosolvency Definition Techniques of Solubilization Solubilization by Cosolvents Some Practical Considerations Conclusion
Introduction to Solid Dispersion Definition Carriers for Solid Dispersion Methods of Preparation Chracterization of Solid Dispersion system Recent Development -Cyclodextrin Drug Dispersion system Characteristics of -Cyclodextrins Physicochemical properties Current Status Conclusion
INTRODUCTION TO COSOLVENCY
Solubilization of poorly Soluble drug can be by addition of some water miscible solvents in which the drug has appreciable solubility. This Solubility may be due to.. Independent solubility of substance in each solvent, Disruption of Hydrophobic interactions of Water molecules at the Nonpolar solute-water interface.
DEFINITION
The Phenomenon of Increasing the solubility of poorly soluble drug in combination with other solvent/solvents is known as Cosolvency.
Techniques of Solubilization
Formation of Soluble salts, Molecular complexes, Cyclodextrin inclusion complexes, Solubilization by Surfactants, Solubilization by Cosolvents.
Polarity scales are used for this purpose, because there is no absolute measure for the Polarity. Measures of Polarity Dielectric constant(),Solubility parameter(), & Surface tension() HLB scale is used to measure . Macroscopic properties of solute & solvent are used to measure , & .
-: Solubilization by Cosolvents :
Sr. no.
Name
Surface Tension ()
Polarity scales are used for this purpose, because there is no absolute measure for the Polarity.
Measures of Polarity Dielectric constant(),Solubility parameter(), & Surface tension() HLB scale is used to measure . Macroscopic properties of solute & solvent are used to measure , & .
Dielectric Constant ()
Water
72.0
81.0
Glycerin
64.9
16.5
42.5
Ethylene glycol
48.8
14.6
37.7
Furfural
43.5
12.5
41.9
Propylen e glycol
37.1
12.6
32.0
NON-POLAR SOLUTES
If both are in Proportion then Partition coefficient in one partitioning system is linearly related to the Partition coefficient in a similar system.
i.e. = S Log PCO/w + T where, = solubilising power of the solvent, S & T are the constants for each solvent. PCO/w & PCO/C = Partition coefficient in Octanol-water & Octanol-cosolvent system Yalkowsky et.al. shown that is proportional to Log PC for a variety of solute. Hence is dependent upon the solute polarity as measured by Log PCO/w & on the cosolvent polarity as measured by S & T.
SEMI-POLAR SOLUTES
Semi-polar drugs has poor aqueous solubility due to strong crystalline interactions & due to high activity coefficients in water. Paruta treated the solubility of semipolar drugs in mixed aqueous system based on dielectric constant & martin used regular solution theory. In above approaches, the mixed solvent is treated as a linear combination of water & cosolvent & max. in solubility curve attained when the polarity of the drug PD=FCPC+FWPW where, PD = polarity of Drug f = fraction P = polarity.
POLAR SOLUTES
These are more difficult to characterize than nonpolar & semi-polar solutes, bcoz the most polar solutes can dissociate to some extent in aq. Solution.
But polar solutes are nearly always crystalline & high melting, they tend to be solubilise in water, bcoz of their high affinity for water more than self interactions of the crystalline lattice.
Addition of a less polar solvent to the water the affinity of the solvent to solutes & thus solubility.
Cosolvents have become the use of solubilising the drugs for both IV & IM administration bcoz of irritating effects of most surfactants & low toxicity of cosolvents. Frequently used cosolvents are Propylene glycol, ethanol, glycerine, PEG.
CONCLUSION
The increase in degree of solubilization of drug is dependent upon Non-polarity of the drug & the Non-polarity of cosolvent.
SOLID DISPERSION
Solid Dispersion provides Particle size reduction & Increased rates of Dissolution
DEFINITION
It is the Dispersion of one or more Active ingredients in an inert carrier or matrix at Solid state prepared by the Fusion or Melting solvent method.
Characteristics : a) Readily soluble in water, b) Stable at processing temp. c) Chemically & Pcologically inert.
Examples :
SUGARS :- Dextrose, Sorbitol etc. ACIDS :- Citric Acid, Tartaric Acid etc. POLYMERIC MATERIALS :- PEG 4000, PEG 6000, Sodium Alginate etc.
METHODS OF PREPARATION
Melting method
Solvent method Melting & Solvent method.
Physical mix. Of a Drug + Water soluble carrier, & cooled, solidify in ice bath, Melt was poured on the ferrite or stainless steel plate, cooled by flowing air or water on opposite side, solid mass is crushed pulverized sieved. a) Simplicity & economy b) Supersaturation.
Adv. :-
Remedial Measures :a) Use of sealed container, b) Melting under vacuum or a blanket of inert gas like
Nitrogen
SOLVENT METHOD:
Dissolve physical mixture of two solid components in a common solvent, Evaporation of solvent. E.g.:- -Carotenes PVP, Griseofulvin PVP etc. :- Prevention of thermal decomposition
Adv.
Disadv. :- a) Incomplete removal of solvent b) Adverse effect of solvent on chemical stability of drug, c) Selection of common volatile solvents & Possible polymorphic changes.
The drug is first Dissolve in solvent then the solution incorporated directly into the melt of the carrier.
Adv. :- It has both melting as well as solvent method. Disadv.:- It is limited to drugs with low therapeutic dose.
Simple Eutectic mixtures Solid Solutions a) Continuous Solid solution b) Discontinuous Solid solution - Substitutional Solid solution - Interstitial Solid solution Glass solution & Glass Suspension Amorphous precipitation in a crystalline carrier Compound or complex formation betn drug & carriers.
Spectroscopic Method
Solubility determination Dissolution rate method Microscopic Method Thermal analysis Cooling curve Method Thaw melt Method Thermo-Microscopic Method Differential Thermal Analysis Zone Melting Method X-ray diffraction Method
RECENT DEVELOPMENT
Because of Difficulty to scale up for the manufacture of solid dispersion by Pulverization, Sieving, Mixing with relatively large amt. of Excipients & encapsulation in to hard gelatin capsules or compressing in to Tablet,in recent yrs. Surface active, self emulsifying carriers & devp. of technologies which are used to encapsulate solid dispersion directly in to Hard gelatin capsule as melts are Developed. E.g. a) Poloxamer 188 as a carrier for Ibuprofen, b) Poloxamer 407 as a carrier for Nifedipine, c) PEG, Myri 2, Eudragit E100 as a carrier for Indomethacin.
-CYCLODEXTRIN DRUG DISPERSION SYSTEM Cyclodextrins are cyclic, non-reducing, water soluble oligosaccharides. Cyclodextrin has beneficial effects on solubility, dissolution rate, chemical stability & absorption rate of a drug. They are available in three forms - , & Cyclodextrins consisting of six, seven & eight D-glucopyranose units.
CHARACTERISTICS OF -CYCLODEXTRIN
Sr. no.
01. 02. 03. 04. 05. 07. 08.
Characteristics
No. of Glucose units Molecular wt. Solubility in water (g/100ml) at RT Optical rotation Cavity diameter Diameter of outer periphery (A0) Approx. volume of cavity (A0)
-Cyclodextrin
7 1135 1.85 162 + 0.5 6.0 + 6.5 15.4 + 0.4 262
PHYSICOCHEMICAL PROPERTIES
It has cylindrical shape with a central axial cavity. All secondary hydroxyl groups are located on one side of the molecule, while all primary hydroxyl groups are on the other hand. The lining of the internal cavity is formed by the oxygenbridge atoms, which makes the cavity slightly aploar. Marketed Solid formulations:Piroxicam- -CD tablets & suppositories. Benexate- -CD Capsules. Omeprazole- -CD Capsule.
CURRENT STATUS
It is not yet considered as standard inactive ingredients in pceuticals due to the uncertain regulatory acceptance of a formulation containing non-standard inactive ingredient. 25 CD based products are available currently in the Market.
CONCLUSION
Use of CDs is a practical way to improve the physicochemical & pceutical properties of Drug molecules. Play an Imp. Role in the development of formulations due to their effects on Solubility & absorption of Drug. They are safe & non-toxic both orally & parenterally. They enhances the solubility,Dissolution rate & bioavailability to improve chemical & physical stability Reduces unpleasant side effects & bitter taste & to achieve sustained action.
REFERENCES
The Theory and Practice of Industrial Pharmacy by Leon Lachman and H.A.Lieberman, 3rd and 4th edition. Text book of Physical Pharmacy by Alfred Martin, Varghese publication. Text book of Pharmaceutical Dosage Forms by H.A.Lieberman and Leon Lachman. Text book of Modern Pharmaceutics by Gilbert &Banker. Text book of pharmaceutical practice by M .Aulton. Pharmaceutical dosage forms parenteral medications ,volume 1by Kenneth E. Avis ,Leon Lachmann,Herbert A Liebermann,Marcel Dekker inc, 270 Madison Avenue ,New York
Pharmaceutical dosage forms parenteral medications ,volume 1by Kenneth E. Avis ,Leon Lachmann,Herbert A Liebermann,Marcel Dekker inc, 270 Madison Avenue ,New York Google( online articles ) www.ijps.com