Professional Documents
Culture Documents
At this time on my article, I'll share a little about the components installed on an Air Conditioner, which is divided into two sections: Section Indoor Unit and Outdoor Unit Parts
1. INDOOR COMPONENTS
Indoor components consist of: a. Grille
Grille is the most important part in an indoor, because the grille is the body of indoor, which serves as a position of components that exist in the indoor.
b. Evaporator
Water Conditioner is a device made of copper that is covered with a circle of aluminum flake shaped lattice thin and functional meeting facilities, which is transform the room into the cold air as circulation assisted by the indoor blower.
Is a Motor AC / DC that serves the indoor blower to move a certain speed in order to get the room air can circulate through the evaporator.
d. Indoor Blower
Is a round-shaped device that is called a blower that serves as a tool to throw a room air aided by the indoor fan motor.
e. PCB / Module
Micro-computer is a tool that serves to give the command a whole series of air conditioner
f. Remote Controller
Is a tool for use our desire to ac, which is connected with AC Module
f. Thermistor
Is a tool that serves as an air sensor to analyze the room was freezing cold and analyze outdoor supply.
g. Capacitor fan
f. Air Filters
B. OUTDOOR COMPONENTS
a. Body
Is zinc or plastic that serves as a tool to place completion of the whole series of outdoor
b. Kompressor
which is a tool that serves as a means to circulate the freon gas from indoor to outdoor
c. Condenser
d. Capacitor Kompressor
Function similarly to capacitor on indoor, but have a higher tolerance than the fan capacitor
Is an electric motor AC / DC that serves as a means to circulate air around the outdoor that functions to maintain a certain temperature
g. Capillary
tool that serves to process the gas into liquid causing condensation.
h. Filter Dryer
As the name implies it serves as filter impurities that may be present in the system.
i. Faucets valp
j. Overload
Is an automated tool that works as a control compressor when the compressor is too hot
THANK YOU