Professional Documents
Culture Documents
Summary
Set and configure soft launch site/sectors Define subscriber setting
equipment, service, subscriber type
Define environment Create traffic map based on #sub or throughput demand Run Monte Carlo for R99 and HSDPA carriers Analyze Monte Carlo results
# served subscriber Throughput per sector Examine unserved subscriber reasons
Each sector has carrier 1 and 3, both R99 + HSPA carriers Activate carrier 1 as R99 ONLY Activate carrier 3 as HSPA ONLY
3
Define HSDPA DL bearer HS-DSCH Ec/Nt Define HSUPA UL bearer E-DCH Ec/Nt
2b setup equipment
Both HSPA equipment, where WCDMA-R99 MS has ALL R99 bearer but no HSDPA bearer WCDMA-data-dongel has ALL R99 bearer + HSDPA bearer
2c setup services
2x CS services (12.2K voice and 64K data) with specified individual loading and DL activity factor=50%
3x PS services (164K/128/384K data) with specified individual loading and DL activity factor=100%
HSPA subscriber for indoor usage for PS services with lower priority (2)
10x scaling factor for BOTH subscriber type to overspread subscriber from traffic map (i.e., to spread as many subscriber as possible)
3 setup environment
Enter fast/slow fading margin map default 4x planet clutter type to clutter names from map e.g., disable some clutter, no indoor for water clutter set clutter dependent DL orthogonal % (100% = no intra-cell interference, 0% = intra is same as inter-cell interference)
10
11
Create traffic map with unit #sub/km2 and select CPICH best server within mongkok area
12
assign different weight factor per clutter class and generate traffic map
13
Distribution of spread subscriber after MC runs converged after MC result is checked OK, apply cell loading (i.e., write traffic power % and noise rise back to sector config)
14
15
16
Create sector display scheme to represent # served sub, apply to sector on map windows
17
18
Create statistics report based on HS-DSCH max achievable data rate and with Analysis area = mongkok_area Classified grid = best server grc file Traffic map = xxx Step size of data rate = 32k, 64k, 128k, 384k, 1M, 2M, 3M as different ranges
19
e.g., top 10x sector with highest coverage area % within polygon within 2M~3M data rate range
20