Professional Documents
Culture Documents
Boards
-20100618
content
BTS system
Single-mode BTS boards
BTS312
content
BTS system
Single-mode BTS boards
BTS312
BTS system
BTS System
UL
DL
content
BTS system
Single-mode BTS boards
BTS312
BTS Cabinet
CDU
Connect
to which
TRX?
SCU
Combined 4 routes input signals into one;
Combine Loss : 6.8dB;
SCU should works with CDU together;
Signal flow: TRX-SCU-CDU.
CDU Configuration:
S6
CDU Configuration:
CDU Configuration:
S8
TX/RX
RX
C
D
U
1
RX1
TX/RX
RX1
RX1
RX2
RX2
RX3
RX3
RX3
RX4
RX4
RX4
RX2
SCU1
RX
C
D
U
2
RX1
RX2
RX3
RX4
SCU2
RxA
RxA
RxA
RxA
RxA
RxA
RxA
RxA
RxB
RxB
RxB
RxB
RxB
RxB
RxB
RxB
TRX4 TRX3
TRX2
TRX1
TRX8
TRX7
TRX6
TRX5
Configuration depends on which CDU does diversity signal come from. Usually
it is configured as the first case. TRXs Main and Diversity signal come from
different CDU.
content
BTS system
Single-mode BTS boards
BTS312
BTS Cabinet
TX
IN1
combiner
combiner
TCOM
IN2
TRX0
TX2
RXM1
RXD1
RXM2
RXD2
divider
divider
TX
divider
divider
TRX1
Functions of DTRU
RF Transmitting Part:
Modulates the baseband signals into RF signals and performs upconversion, filtering, and RF hopping;
Amplifies and outputs the RF signals
The transmitting modes: Transmit independency; PBT; Wideband
combination; Transmit diversity
RF Receiving Part:
Demodulates the RF signals into baseband signals and performs RF
hopping
Divides the received RF signals and performs receive diversity
The receiving modes: Receive independency; Receive diversity; Fourway receive diversity
F1
F2
F2
PBT mode:
f1
f1
Two routes of
signal combined at
the same time.
Power boosted up.
f1
f1
(not used)
f2
TCOM:
f1
f2
t2
f1
f1
t1!=t2
t1
f1
f1
Two route of signal send at different time.
f1
each TRX of the DTRU has its own main and diversity routes.
(not used)
duplexer
TXA
RXA1
RXA2
RXA3
RXA4
TXB
RXB1
RXB2
RXB3
RXB4
ANTB
divider
duplexer divider
To DDPU
S4/4/4
DDPU
RXA1
RXA2
TX A
RXA3
RXA4
RXB1
RXB2
TX B
RXB3
RXB4
TX 1
TX 1
IN 1
IN 1
TCOM
TCOM
IN2
IN2
TX 2
TX 2
DTRU
RXM 1
RXM 1
RXD 1
RXD 1
RXM 2
RXM 2
RXD 2
RXD 2
DTRU
S6/6/6
S6/6/6: each cell
configured 3 DTRU, 1
DCOM and 1 DDPU
BSC data configuration
should be : wideband
transmit combination
mode , receive
diversity mode;
Cabinet top power
(dBm): underlay 47.83.3-1.0; overlay 47.83.3-3.3-1.0;
DDPU
Tx-com
RXA1
RXA2
RXA3
TX A
TX1
RXA4
RXB1
RXB2
RXB3
TX B
TX 2
RXB4
TX 1
IN 1
TCOM
IN2
TX 2
DTRU
TX 1
IN 1
TCOM
IN2
TX 2
DTRU
TX 1
IN 1
TCOM
IN2
TX 2
DTRU
S8/8/8
S8/8/8 each cell
configured 4 DTRU, 2
DCOM and 1 DDPU
BSC data
configuration should
be : wideband
transmit combination
mode , receive
diversity mode
Cabinet top power
(dBm): 47.8-3.3-3.31.0
DDPU
Tx-com
RXA2
TX1
Tx-com
RXA1
RXA3
TX A
TX1
RXA4
RXB1
RXB2
TX 2
RXB3
TX B
TX 2
RXB4
TX 1
IN 1
TCOM
IN2
TX 2
DTRU
TX 1
IN 1
TCOM
IN2
TX 2
DTRU
TX 1
IN 1
TCOM
IN2
TX 2
DTRU
TX 1
IN 1
TCOM
IN2
TX 2
DTRU