You are on page 1of 8

Prime Technologies

www.Gear-Testers.com
Parameter
Value
primetechindia@gmail.com
MAAG SP 60 GEAR
Maximum Gear
Diameter

600 mm

Minimum Gear
Diameter

35 mm

Module Range

0.5 20mm

Between Center
Distance Maximum 600 mm
Between Center
Distance Minimum

100 mm

Maximum Lead
Inspection at 0
Degree

50 mm

Maximum Helix
Angle can be
possible to

50 Degree

TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
P
V
primetechindia@gmail.com
DAVID BROWN 18 T GEAR
ARAMETER

ALUE

Maximum Gear Diameter

300 mm

Minimum Gear Diameter

15 mm

Module Range

0.5
15mm

Between Center Distance


Maximum

400 mm

Between Center Distance


Minimum

30 mm

Maximum Lead Inspection at


0
150 mm

Maximum Helix Angle can be


possible
40
to Check
Vertical Travel of Probe slide 150 mm

TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
P
V
primetechindia@gmail.com
GLEASON IL 600
ARAMETER

ALUE

Maximum Gear Diameter

600 mm

Minimum Gear Diameter

20 mm

Module Range

0.5
15mm

Between Center Distance


Maximum

850 mm

Between Center Distance


Minimum

30 mm

Maximum Lead Inspection at


0
160 mm

Maximum Helix Angle can be


possible
45
to Check
Vertical Travel of Probe slide 150 mm

GEAR

TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
primetechindia@gmail.com

PARAMETER

VALUE

Maximum Gear Diameter

390 mm

Minimum Gear Diameter

15 mm

Module Range

0.5
15mm

Between Center Distance


Maximum

550 mm

Between Center Distance


Minimum

20 mm

Maximum Lead Inspection at


0

80 mm

Maximum Helix Angle can be


possible

45

HARBIN GEAR TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
primetechindia@gmail.com
PARAMETER

VALUE

Maximum Gear Diameter

600 mm

Minimum Gear Diameter

20 mm

Module Range

0.5
15mm

Between Center Distance


Maximum

700 mm

Between Center Distance


Minimum

50 mm

Maximum Lead Inspection at


0
150 mm

Maximum Helix Angle can be


possible
60

KLINGELBERG PFS 600


GEAR TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
primetechindia@gmail.com
Parameter

Value

Maximum Gear Diameter

1200 mm

Minimum Gear Diameter

20 mm

Module Range

0.5 20 mm

Between Center Distance


Maximum

1000 mm

Between Center Distance


Minimum

30 mm

Maximum Face Width

240 mm

Maximum Helix Angle

85

Vertical Travel of Probe


slide

200 mm

KLINGELBERG PFSU 600


GEAR TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
P
V
primetechindia@gmail.com
ARAMETER

ALUE

MAAG PH 40 GEAR TESTER

Maximum Gear Diameter

400 mm

Minimum Gear Diameter

20 mm

Module Range

0.5
15mm

Between Center Distance


Maximum

720 mm

Between Center Distance


Minimum

10 mm

Maximum Lead Inspection


at 0

150 mm

Maximum Helix Angle can


be possible

45

to Check
Vertical Travel of Probe slide 150 mm

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

Prime Technologies
www.Gear-Testers.com
primetechindia@gmail.com
P
V
ARAMETER

ALUE

Maximum Gear Diameter

320 mm

Minimum Gear Diameter

20 mm

Module Range

0.5
15mm

Between Center Distance


Maximum

600 mm

Between Center Distance


Minimum

30 mm

Maximum Lead Inspection at


0

150 mm

Maximum Helix Angle can be


possible

45

to Check

MAAG PH 60 GEAR
TESTER

FEATURES:
Fully reconditioned & all defective mechanical parts reworked or replaced.
Assured supply of complete spares & services for at least 10 years.
Experienced & Skilled Service Team for Service & Calibration.
Machine will be proved with CNC machine calibrated master within +/- 2 micron.
One year warranty for complete machine. Upgraded more than 300 machines all over
India.
Gear Analysis software is Pentium IV & windows XP OS compatible.
ACCESSORIES:
Lower Center 30.000mm -01 Qty.
Job Holding Carrier for 30.00mm center- 01Qty.
HSS Stylus for lead & profile measurement 1.0mm , 2.0mm & 3.0MM Each
01 Qty.

You might also like