Professional Documents
Culture Documents
CHAPTER 2
WCDMA Mobility
Counters and KPIs
Introduction
ISSUE 1.0
www.huawei.com
HUAWEI Confidential
different categories.
Different counters and KPI are used for
different handover.
HUAWEI Confidential
HUAWEI Confidential
Soft handover
Softer handover
Hard handover
Inter-RAT CS handover
Inter-RAT PS handover
HSDPA handover
HSUPA handover
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
VS.SHO.AMR.SuccOut
VS.SHO.CS64.AttOut
VS.SHO.CS64.SuccOut
VS.SHO.PS64.AttOut
VS.SHO.PS64.SuccOut
VS.SHO.PS128.AttOut
VS.SHO.PS128.SuccOut
VS.SHO.PS384.AttOut
VS.SHO.PS384.SuccOut
SHO.SuccRLAddUESide at point C
SHO.AttRLDelUESide at point B
SHO.SuccRLDelUESide at point C
HUAWEI Confidential
The measurement is triggered at point A as shown in the figure, that is, when the RNC does not receive the
response from a UE upon expiry of the timer waiting for the response to the ACTIVE SET UPDATE
message from the RNC to the UE. The RNC measures the item in the cell of the RL requested to add.
HUAWEI Confidential
Formula
SHOASUSuccess
SHO _ SR
*100%
SHOASUAttempt
Measurement scope:
RNC & Cell
Description
This KPI can be used to evaluate the soft handover success Rate
in one RNC or one cell, which includes softer handover.
HUAWEI Confidential
Counters (RNC)
SHOASUAttempt: VS.SHO.Att.RNC
SHOASUSuccess: VS.SHO.Succ
Counters (Cell)
SHOASUAttempt:
SHO.AttRLAddUESide
SHO.AttRLDelUESide
SHOASUSuccess:
SHO.SuccRLAddUESide
SHO.SuccRLDelUESide
HUAWEI Confidential
Formula
UE1 *1 UE 2 * 2 UE 3 * 3
SHR
*100%
UE
Measurement scope:
RNC
Description
This KPI can be used to evaluate the soft handover percentage
HUAWEI Confidential
Counters
UE1: VS.SHO.AS.1
UE2: VS.SHO.AS.2Softer & VS.SHO.AS.2Soft
UE3: VS.SHO.AS.3Softer, VS.SHO.AS.3Soft & VS.SHO.AS.3Soft2Softer
UE: VS.SHO.AS.1+ VS.SHO.AS.2Softer+VS.SHO.AS.2Soft+
VS.SHO.AS.3Softer+VS.SHO.AS.3Soft + VS.SHO.AS.3Soft2Softer
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
VS.HHO.InterFreqOut.NoReply
HUAWEI Confidential
HUAWEI Confidential
VS.HHO.AMR.AttOut
VS.HHO.AMR.SuccOut
VS.HHO.CS64.AttOut
VS.HHO.CS64.SuccOut
VS.HHO.PS64.AttOut
VS.HHO.PS64.SuccOut
VS.HHO.PS128.AttOut
VS.HHO.PS128.SuccOut
VS.HHO.PS384.AttOut
VS.HHO.PS384.SuccOut
HUAWEI Confidential
Formula
InterHHO _ SR
InterHHOSuccess
100%
InterHHOAttempt
Measurement scope:
RNC & Cell
Description
This KPI can be used to evaluate the inter-frequency hard
handover success Rate in one RNC.
HUAWEI Confidential
Counters (RNC)
InterHHOAttempt (RNC): VS.HHO.InterFreq.Att.RNC
InterHHOSuccess (RNC): VS.HHO.InterFreq.Succ.RNC
Counters (Cell)
InterHHOAttempt (Cell): VS.HHO.InterFreq.AttOut
InterHHOSuccess (Cell): VS.HHO.InterFreq.SuccOut
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
Figure1
Figure2
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
Configuration Unsupported :
VS.IRATHO.FailCSOut.CfgUnRNC (RNC)
IRATHO.FailOutCS.CfgUnsupp (Cell)
HUAWEI Confidential
HUAWEI Confidential
HUAWEI Confidential
No response for Cell Change Order from UTRAN, and then no Iu release command
from CN: VS.IRATHO.PSOut.NoReply
HUAWEI Confidential
Formula
CSInterreR ATPpHO _ SR
CSInterRATPpHOSuccess
*100%
CSInterRATPpHOAttempt
Measurement scope:
RNC & Cell
Description
This KPI can be used to evaluate the CS inter-RAT preparation
handover success Rate in one RNC
HUAWEI Confidential
Counters
CSInterRATPpHOAttempt:
VS.SRELOC.AttPrep.IRHOCS (RNC)
IRATHO.AttRelocPrepOutCS (Cell)
CSInterRATPpHOSuccess
VS.SRELOC.SuccPrep.IRHOCS (RNC)
IRATHO.SuccRelocPrepOutCS (Cell)
HUAWEI Confidential
Formula
CSInterRATHOSuccess
CSInterRATHO _ SR
*100%
CSInterRATHOAttempt
Measurement scope:
RNC & Cell
Description
This KPI can be used to evaluate the CS inter-RAT handover
success Rate in one RNC
HUAWEI Confidential
Counters
CSInterRATHOAttempt:
VS.IRATHO.AttCSOut.RNC (RNC)
IRATHO.AttOutCS (Cell)
CSInterRATHOSuccess
VS.IRATHO.SuccCSOut.RNC (RNC)
IRATHO.SuccOutCS (Cell)
HUAWEI Confidential
Formula
PSInterRATPpHO _ SRout
Measurement scope:
PSInterRATPpHOSuccessOut
100%
PSInterRATPpHOAttemptOut
RNC
Description
This KPI can be used to evaluate the PS inter-RAT handover
preparation success Rate in one RNC
HUAWEI Confidential
Counters
PSInterRATPpHOAttempt (RNC):
VS.IRATHO.EvalPSOutUTRAN.RNC
PSInterRATPpHOSuccess (RNC)
VS.IRATHO.AttPSOutUTRAN.RNC
HUAWEI Confidential
Formula
PSInterRATHO _ SRout
PSInterRATHOSuccessOut
100%
PSInterRATHOAttemptOut
Measurement scope:
RNC & Cell
Description
This KPI can be used to evaluate the PS inter-RAT handover
success Rate in one RNC, which includes handover out from this
RNC
HUAWEI Confidential
Counters
PSInterRATHOAttempt:
VS.IRATHO.AttPSOutUTRAN.RNC (RNC)
IRATHO.AttOutPSUTRAN (Cell)
PSInterRATHOSuccess:
VS.IRATHO.SuccPSOutUTRAN.RNC (RNC)
IRATHO.SuccOutPSUTRAN (Cell)
HUAWEI Confidential
HUAWEI Confidential
Formula
HtoHSHOSuccessRatio
HtoHSHOSuccessNum
100%
HtoHSHOAttempNum
Measurement scope:
Cell
Description
This KPI can be used to evaluate the soft handover success Rate of
HSDPA service in a cell.
HUAWEI Confidential
Counters
HtoHSHOAttempNum: VS.HSDPA.CellChg.AttOutIntraRNC
Measurement point:
The measurement is triggered at point A as shown in the figure when the RNC
sends a PHYSICAL CHANNLE RECONFIGRATION message to a UE for HSDPA
serving cell change between two intra-frequency cells.
RNC measures this item in the original cell
HUAWEI Confidential
Counters
HtoHSHOSuccessNum: VS.HSDPA.CellChg.SuccOutIntraRNC
Measurement point:
The measurement is triggered at point B as shown in the figure when the RNC
receives from a UE a PHYSICAL CHANNLE RECFG COMPLETE message
RNC measures this item in the original cell
HUAWEI Confidential
Formula
HtoHInterHHOSuccessRatio
Measurement scope:
HtoHInterHHOSuccessNum
100%
HtoHInterHHOAttempNum
RNC
Description
This KPI can be used to evaluate the inter-frequency hard
handover success Rate of HSDPA service in a cell
HUAWEI Confidential
Counters
HtoHInterHHOAttemptNum:
VS.HSDPA.HHO.AttOutIntraRNCInterFreq
Measurement point:
The measurement is triggered at point A as shown in the figure.
When the RNC sends a PHYSICAL CHANNLE RECONFIGRATION message to a
UE for an inter-frequency hard handover from HS-DSCH to HS-DSCH, the RNC
measures this item in the original cell.
HUAWEI Confidential
Counters
HtoHInterHHOSuccessNum:
VS.HSDPA.HHO.SuccOutIntraRNCInterFreq
Measurement point:
The measurement is triggered at point B as shown in the figure.
When the RNC receives from a UE a PHYSICAL CHANNLE RECFG COMPLETE
message indicating that the handover is an inter-frequency hard handover from HSDSCH to HS-DSCH, the RNC measures this item in the original cell
HUAWEI Confidential
Formula
HtoRHOSuccessNum
HtoRHOSuccessRatio
100%
HtoRHOAttempNum
Measurement scope:
Cell
Description
This KPI can be used to evaluate the channel handover success
Rate when UE handover from HSDPA to DCH in a cell.
HUAWEI Confidential
Counters
HtoRHOAttempNum:
VS.HSDPA.ChR.HSDSCHtoDCH.Att
Measurement point:
HUAWEI Confidential
Counters
HtoRHOSuccessNum:
VS.HSDPA.ChR.HSDSCHtoDCH
Measurement point:
The measurement is triggered at point A1 as shown in the figure
When the RNC receives RADIO BEARER RECONFIGURATION COMPLETE
message from UE, which indicates a handover from HSDSCH to DCH during a
DCCC or RAB MODIFY procedure, the RNC measures this item in a HSDPA cell
the UE camps on
Note : the Transport channels change at the same cell
HUAWEI Confidential
Formula
RtoHHOSuccessNum
RtoHHOSuccessRatio
100%
RtoHHOAttempNum
Measurement scope:
Cell
Description
This KPI can be used to evaluate the channel handover success
Rate when UE handover from DCH to HSDPA in a cell.
HUAWEI Confidential
Counters
RtoHHOAttempNum:
VS.HSDPA.ChR.DCHtoHSDSCH.Att
Measurement point:
The measurement is triggered at point A as shown in the figure.
When sending a RADIO BEARER RECONFIGURATION message to a UE during a
DCCC or RAB MODIFY procedure , the RNC measures this item in the serving cell
of the HSDPA service based on the transport channels the UE occupies before and
after the reconfiguration.
Note : the Transport channels change at the same cell
HUAWEI Confidential
Counters
RtoHHOSuccessNum:
VS.HSDPA.ChR.DCHtoHSDSCH
Measurement point:
The measurement is triggered at point A1 as shown in the figure
When receiving RADIO BEARER RECONFIGURATION COMPLETE message
from UE, which indicating a handover from DCH to HSDSCH during a DCCC or
RAB MODIFY procedure at the same cell, RNC measures this item in a HSDPA cell
the UE camps on.
HUAWEI Confidential
Formula
HSDPAInter RATHO _ SR
HSDPAInter RATHOSuccess
100%
HSDPAInter RATHOAttempt
Measurement scope:
Cell
Description
This KPI can be used to evaluate the HSDPA inter-RAT handover
success Rate in one cell, from WCDMA to GPRS
HUAWEI Confidential
Counters
HSDPAInterRATHOAttempt:
VS.IRATHO.HSDPA.AttOutPSUTRAN
Measurement point:
The measurement is triggered at point B as
shown in the figure
When RNC sends the CELL CHANGE
ORDEWANGCHUANR FROM UTRAN
message to UE dut to HSDPA inter-RAT
outgoing handover, the measurement is
triggered in the original cell
HUAWEI Confidential
Counters
HSDPAInterRATHOSuccess:
VS.IRATHO.HSDPA.SuccOutPSUTRAN
Measurement point:
The measurement is triggered at point C
as shown in the figure
When RNC sends Iu Release Complete
to CN due to HSDPA handover, the
measurement is triggered in the original
cell.
HUAWEI Confidential
HUAWEI Confidential
Counter:
VS.HSUPA.EDCH.SHO.Att
Measurement point:
The measurement takes place when Active Set Update is sent.
Counter:
VS.HSUPA.EDCH.SHO.Succ
Measurement point:
The measurement takes place when Active Set Update Cmp is received.
HUAWEI Confidential
Counter:
VS.HSUPA.ChR.IntraCell.EDCHtoDCH.Att
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL) is sent in a RAB
process, and a RB's UL TrCh type switched from EDCH to DCH.
Counter:
VS.HSUPA.ChR.IntraCell.EDCHtoDCH.Succ
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL) CMP is received in a
RAB process, and a RB's UL TrCh type switched from EDCH to DCH.
HUAWEI Confidential
Counter:
VS.HSUPA.ChR.IntraCell.DCHtoEDCH.Att
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL) is sent in a RAB
process.
Counter:
VS.HSUPA.ChR.IntraCell.DCHtoEDCH.Succ
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL)CMP is received in a
RAB process and any RB's UL Trch type switched from DCH to EDCH.
HUAWEI Confidential
Counter:
VS.HSUPA.ChR.EDCHtoFACH.Att
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL) is sent in a RAB
process.
Counter:
VS.HSUPA.ChR.EDCHtoFACH.Succ
Measurement point:
The measurement is triggered when a RB SETUP(RECFG/REL) CMP is Received in a
RAB process.
HUAWEI Confidential
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL) is sent in a RAB
process.
Counter:
VS.HSUPA.ChR.FACHtoEDCH.Succ
Measurement point:
The measurement is triggered when a RB SETUP (RECFG/REL) CMP is Received in
a RAB process.
HUAWEI Confidential
Intra-frequency HHO
Times of Attempt Channel type Switch from Edch to DCH of IntraFreq HHO
Counter:
VS.HSUPA.ChR.IntraFreq.EDCHtoDCH.Att
Measurement point:
The measurement is triggered when a RB(Phych/Trch) RECFG is sent in a Intrafreq HHO
process, and any RB's UL Trch type switched from EDCH to DCH.
Times of Successful Channel type Switch from Edch to DCH of IntraFreq HHO
Counter:
VS.HSUPA.ChR.IntraFreq.EDCHtoDCH.Succ
Measurement point:
The measurement is triggered when a RB(Phych/Trch) RECFG CMP is received in a Intrafreq
HHO process, and any RB's UL Trch type switched from EDCH to DCH.
HUAWEI Confidential
Inter-frequency HHO
Times of Attempt Channel type Switch from Edch to DCH of InterFreq HHO
Counter:
VS.HSUPA.ChR.InterFreq.EDCHtoDCH.Att
Measurement point:
The measurement is triggered when a RB(Phych/Trch) RECFG is sent in a Interfreq HHO
process, and any RB's UL Trch type switched from EDCH to DCH.
Times of Successful Channel type Switch from Edch to DCH of InterFreq HHO
Counter:
VS.HSUPA.ChR.InterFreq.EDCHtoDCH.Succ
Measurement point:
The measurement is triggered when a RB(Phych/Trch) RECFG CMP is received in a Interfreq
HHO process, and any RB's UL Trch type switched from EDCH to DCH.
HUAWEI Confidential
Inter-System HO
Times of HSUPA RAB Attemp to SysHo Out
Counter:
VS.HSUPA.IRATHO.AttOutPSUTRAN
Measurement point:
The measurement is triggered when a CELL CHANGE FROM UTRAN is sent in a RAB
process.
Counter:
VS.HSUPA.IRATHO.SuccOutPSUTRAN
Measurement point:
The measurement is triggered when a IU REL CMD is received in a SysHo process.
HUAWEI Confidential
Classes (Cell)
VS.SHO.service.AttOut, VS.SHO.service.SuccOut
VS.RRC.MrRpt.1x
VS.RRC.MrRpt.1A. Detect
VS.HHO.service.AttOut, VS.HHO.service.SuccOut
HUAWEI Confidential
Summary
Summary
related counters:
Soft handover counter and KPI
Hard handover counter and KPI
Inter-RAT handover counter and KPI
HSDPA handover counter and KPI
HUAWEI Confidential
Thank you
www.huawei.com