Professional Documents
Culture Documents
Template
About Module 1
Prepared By: ElKin
Question 1 (MC)
By: Jhealuz Escover
One equipment of a combustion
system is the burner in which it
manages the fuel-air mixtures into the
furnace under what conditions?
a. Velocity, temperature and pressure
b. Pressure, velocity and
concentration
c. Turbulence, concentration and
velocity
Question 2 (MC)
By: Jhealuz Escover
A scotch marine boiler is one of the
common type of water-tube boiler in
which is diameter ranges from ______
while its length ranges from ________.
a. 3-8 ft; 4-20 ft
b. 3-8 ft; 6-40 ft
c. 4-15 ft; 4-20 ft
d. 4-15 ft; 6-40 ft
Question 3 (MC)
By: Jhealuz Escover
For a water-tube boiler, the steam
usually leaves the steam drum at _____
o
F but can leave at _______oF if from
superheaters.
a. 700; 1100
b. 600; 1000
c. 500; 900
d. 400; 800
Question 4 (ID)
By: Jhealuz Escover
Identify the 3 differences of a utility
boiler and industrial boiler
Question 5 (MC)
By: Andre San Miguel
Select one which does not belong to the same
maintenance category
a. Record boiler operating pressure or temperature. An excessive
steam or water temperature drop will alert you to excessive loading on
the boiler.
b. Check combustion visually. Look at the flame to see if something
has changed. Changes may be an indication that a problem is
developing.
c. Blow down the water level controls to purge the float bowl of
possible
sediment accumulation. Operating conditions will dictate frequency of
this check.
d. Check fuel and air linkages. Check to ensure that all set screws on
linkages are tight and are securely holding the linkage in place.
Question 6 (MC)
By: Andre San Miguel
Boilers are cleaned with ________ to
remove accumulated oil and grease
before bringing them on-line
a. Acid solutions and water
b. Alkaline solutions, acid solutions and
water
c. Acid solutions and alkaline solutions
d. Alkaline solutions and water
Question 7 (ID)
By: Andre San Miguel
This diverse group of devices manages
the delivery of fuel-air mixture into the
furnace under conditions of velocity,
turbulence
and
concentration
appropriate to maintain both ignition
and combustion.
Question 8 (MC)
By: Andre San Miguel
Question 9 (MC)
By: Benedict Tamayo
This consists of a stationary heating
element and 2 rotating air hoods.
a. Tubular air preheater
b. Rotary preheater
c. Regenerative preheater
d. Rothemuhle preheater
Question 10 (ID)
By: Benedict Tamayo
The conversion of one boiler hp to BTU
per hour
Question 11 (MC)
By: Benedict Tamayo
On what pass does the gas move
through the tube tank directly above
the combustion chamber on a
Horizontal Return Tubular Fire tube
boiler?
a. 1st tube pass
b. 2nd tube pass
c. 3rd tube pass
d. 4th tube pass
Question 12 (ID)
By: Benedict Tamayo
Identify the type of utility boiler
wherein the fuel-air mixture is burnt in
horizontal cylinders.
Question 13 (ID)
By: Biel Dar
For Pulverized Fuel Boiler, the
combustion temperature ranges from
______ to ______ 0C?
Question 14 (ID)
By: Biel Dar
Give at least two factors that limit the
boiler water cycles of concentration?
Question 15 (MC)
By: Biel Dar
These are the other requirements for a
packaged boiler expect:
a. Water pipe work
b. Fuel supply
c. Electrical connections
d. Heat generator
ANSWERS
(For Action by a Partner team)
1.
2.
3.
4.
5.
6.
7.
8.
______
______
______
______
______
______
______
______
9. ______
10. ______
11. ______
12. ______
13. ______
14. ______
15. ______