Professional Documents
Culture Documents
Module 1
Question 1 (MC)
By: Eula
Which of the following steps for initial inspection is
incorrect:
A. All piping must be inspected for adequate
support and expansion provisions.
B. Water used to initially fill the boiler must be at
ambient temperature, but not greater than 70F.
C. Strainers are most important to the safe
operation of gas and/or oil fired units.
D. Electrical power lines to the boiler/burner unit
are connected and the voltage required is
verified.
Question 2 (E)
By: Eula
Question 3 (ID)
By: Eula
Question 4 (MC)
By: Ces
Which of the following is correct for the features of
a water tube boilers:
I. Forced, induced and balanced draft provisions
help to improve combustion efficiency
II. Less tolerance for water quality calls for water
treatment plant
III. Higher thermal efficiency levels are possible
IV. Less tolerance for water quality calls for water
treatment plant
A. I, II, III, IV
C. I, II D. I
B. I, II, III
Question 5 (E)
By: Ces
Question 6 (MC)
By: Ces
Question 7 (MC)
By: Keichell
Question 8 (ID)
By: Keichell
Question 9 (ID)
By: Keichell Landicho
Question 10 (E)
By: Nick
Question 11 (MC)
By: Nick
Question 12 (T/F)
By: Nick
Question 13 (MC)
By: Noreen
Question 14 (ID)
By: Noreen
Question 15 (MC)
By: Noreen
Answers (Handout#-Page#)
1.
2.
3.
4.
5.
6.
7.
8.
B. (6,27)
Photocell, Infrared,
Ultraviolet detectors (8,8)
Controller, valve, pump,
water flow, water flow
sensor, level sensor, steam
flow sensor, and steam flow
(6,8)
B (3,3)
150, 200, 250, 300, 350 psi
(5,6)
D (slide 7,2)
9.
American Society of
Mechanical Engineers
(6,1-5)
10.
11.
12.
B (3,1)
Water Walls/Fire Walls (4, 18)
13.
C (5, 1)
14.
15.
A (6, 2)