You are on page 1of 6

Security Level:

F2P optimization proposal


www.huawei.com

Huawei RNO Team

HUAWEI TECHNOLOGIES CO., LTD.

F2P overlapping optimization


Function introduction
As shown in the figure, at Point A UE goes to CELL_PCH so UE only receives BCCH or PCCH
message it cant receive DOWNLINK DIRECT TRANSFER message from RNC.
If F2P_DT_MSG_BUFFER_SWITCH is OFF, RNC discards the message Downlink DIRECT TRANFER, if the
content of Downlink Direction transfer is CC Setup, Call Confirm etc, CS call setup fails.
If F2P_DT_MSG_BUFFER_SWITCH is ON,RNC doesnt discard the message Downlink DIRECT TRANSFER
at point A instead RNC sends paging to UE then UE makes state transfer from PCH to FACH, then
RNC resend DOWNLINK DIRECT TRANSFER to UE.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei proprietary. No spread without permission.

F2P overlapping optimization


MML Command
SET URRCTRLSWITCH: OptimizationSwitch=F2P_DT_MSG_BUFFER_SWITCH-1;

Parameter meaning
Whether the RNC buffers a DIRECT TRANSFER message received from the CN and sends a PAGING
message after the RNC receives a RADIO BEARER RECONFIGURATION COMPLETE message from a UE
moving from the CELL_FACH to CELL_PCH state (F2P)
1: This switch is turned on. The RNC buffers the DIRECT TRANSFER message and sends the PAGING
message to the UE.
0: This switch is turned off. The RNC does not buffer the DIRECT TRANSFER message, the message is
discarded.
Expected improvement:
Better CS call setup up success rate on the user experience.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei proprietary. No spread without permission.

F2P overlapping optimization


CS RAB SSR:

HUAWEI TECHNOLOGIES CO., LTD.

Huawei proprietary. No spread without permission.

Summary

NE

Command

parameter name

corrent
value

proposa
l

RNC

SET
URRCTRLSWITCH

F2P_DT_MSG_BUFFER_SWITCH

HUAWEI TECHNOLOGIES CO., LTD.

Huawei proprietary. No spread without permission.

Thank you !

HUAWEI TECHNOLOGIES CO., LTD.

Huawei proprietary. No spread without permission.

You might also like