Professional Documents
Culture Documents
NOV. 2014
3D PRINTING IN OTHER
AREAS
3D PRINTED MOON BASE SOON
The European Space Agency is
exploring the possibility of establishing
a permanent lunar base with the help of
3D printing technology. Setting up a
lunar could be made much simpler by
using a 3D printer to build it from local
materials, the ESA said.
(Times of India, November 12, 2014)
3D PRINTING-BASICS
3D printers turn digital computer models into solid, physical
objects by building them up in a great many very thin layers.
We are familiar with the inkjet or laser printers that produce
most of todays documents or photographs.
These create text or images by controlling the placement
of ink or toner on the surface of a piece of paper. In a similar
fashion, 3D printers manufacture objects by controlling the
placement and adhesion of a build material in 3D space.
3D PRINTING-BASICS
Ref.:- 3D Printing: The Next Industrial Revolution, Christopher Barnatt, ISBN: 978-1484181768
3D PRINTING-BASICS
A few of the 3D printers that are based on the this
technology are able to mix and solidify many
different photopolymers at the same time, so
allowing them to print out multi-material objects
made of parts with different material properties. For
example, the latest Connex printers from a company
called Stratasys can build objects in up to 14
different materials at the same time. These range
from hard plastics in a range of transparencies and
colours, to softer, rubber-like compounds.
Ref.:- 3D Printing: The Next Industrial Revolution, Christopher Barnatt, ISBN:
978-1484181768
3D PRINTING-BASICS
A final category of 3D printing hardware creates
objects by selectively sticking together successive
layers of a very fine powder. Such granular materials
binding can be achieved either by jetting a liquid glue
or binder onto each powder layer, or by fusing
powder granules together using a laser or other heat
source. Already granular materials binding can be
used to 3D print objects in a very wide range of
materials. These include nylon, ceramics, wax, bronze,
stainless steel, cobalt chrome and titanium.
Ref.:- 3D Printing: The Next Industrial Revolution, Christopher Barnatt, ISBN: 978-1484181768
3D PRINTING IN FOUNDRY
Production of foundry molds
Production of cores
Castings made by assembling cores
in molds
Properties of molds and cores made
by 3D printing.
Casting defects.
Limitations at present state of
development.
3D PRINTED CORE
3D PRINTED CORE
3D PRINTING-BASICS
CASTING PRODUCED FROM 3D
PRINTED CORE AND MOLD
3D PRINTED CORE
3D PRINTED CORE AND MOLD
3D PRINTED CORE
3D PRINTED-CORE AND
MOLD
CASTING PRODUCED BY 3D PRINTED
CORE AND MOLD
PROPERTIES OF MOLD AND CORE
PRODUCED BY 3D PRINTING
?
MERITS AND DEMERITS
MERITS
No draft.
No parting line.
Gating system may be printed along
with mold.
DEMERITS
Time taken to produce one core is
much longer than the traditional
method.
MERITS AND DEMERITS(Contd.)
Some times, depending on the chemicals used,
additional baking of mold/core may be required.
Not much technical details regarding blow etc.
is presently available.
Powder/sand of different types may be required
for ferrous and non ferrous casting for its ability
to withstand high temperature.
At present state of development not suitable for
mass production.
Cost of machine ?
CASTING DEFECTS
?
COMPANIES
EXONE
3D SYSTEMS
VIRIDIS 3D
And Many More
END OF THIS
PREENTATION
BUT
BEGINNING OF A REVOLUTION