Professional Documents
Culture Documents
India Engineering
center
GUI(Cient)
F
Subnet management
system
Manager 3
Subnet management
layer F F
F
F F F
NE/subnet LM NE/subnet NE/subnet
management system T ......
NE management Manager 1 management system management system
layer Manager 2 Manager n
Qx Qx Qx
f
GNE/Agent
GNE/Agent
ECC
ECC ECC
ECC
NE/Agent NE/Agent
NE/Agent NE/Agent
ECC ECC
ECC ECC
NE/Agent ECC GNE/
NE/Agent NE/Agent
Agent
NE layer
Equipment layer S S S S S S
Database Sybase
Available
Above 9G recommended
hardware space
Custom
yes
Create NEs
Select access NEs
Install cards
Connect NEs
Configure multiplex section protection (if necessary)
Configure service
Configure Overhead
Configure clock source
Configure orderwire.
ZXSM-600 (V2)
Tips
ZXONM-900 (V2) :
In installing cards, install NCP first. Confirm that the NCP card is installed in the
8th slot.
NCP, SCB, OW, CS functional cards and power cards must be installed. .
Power cards include PWA and PWB, which provide -48V and +24V power,
respectively. Select the power cards according to actual requirements. .
Setting Groupcall
Pick up the phone, dial #M1M2M3Q1Q2Q3 upon
hearing the dial tone to make a group call.
Q1Q2Q3 (100 ~ 999, wildcard * allowed) is the
groupcall code. The wildcard * is used to refer to any
code, e.g., *12 indicates all orderwire number with the
last two figures being 12, while *** indicates all sites.
Tips:
The insertion code and must be different from the groupcall code in the same network.