Professional Documents
Culture Documents
K. PRAVEEN KUMAR
Reg.No.12371D0708
The aim of this study is to develop a high-
efficiency single-input multiple-output
(SIMO) dcdc converter.
The proposed converter can boost the
voltage of a low-voltage input power source
to controllable high-voltage dc bus and
middle-voltage output terminals.
In this study, a coupled-inductor baseddcdc
converter scheme utilizes only one power
switch with the properties of voltage
clamping and soft switching, and the
corresponding device specifications are
adequately designed.
Dc-Dc converter topologies
Resonant converters
Power electronics switches
Proposed system working principle
Simulation results
Future scope
The power electronic converters are
classified into six types:
1. Diode rectifiers
2. AC-DC converter (Phase controlled
Rectifiers)
3. DC-DC converters (DC choppers)
4. DC-AC converters (Inverter)
5. AC-AC converters
i. AC voltage controllers
6. Static switches
It is known as DC to DC Converter or Dc to Ac PWM inverter.
Diodes,
SCR,
MOSFET,
IGBT,
BJT,
TRIAC etc.
IGBT is a three-terminal power
semiconductor device noted for high
efficiency and fast switching.
When the auxiliary inductor Laux releases its stored energy completely,
and the diode D2 turns OFF, this mode ends.
2) Mode 2 (t1 t2 ) [Fig. (b)]:
At time t = t1 , the main switch S1 is persistently turned ON.
Because the primary inductor LP is charged by the input
power source, the magnetizing current iLmp increases
gradually in an approximately linear way. At the same time,
the secondary voltage vLs charges the middle-voltage
capacitorC2 through the diode D3