Professional Documents
Culture Documents
Exercises
Version 5 Release 8
March 2002
EDU-CAT-E-CCV-FX-V5R8
In this exercise, you will create the Core, Cavity and Slider areas of a Part
2
Create Main
Pulling Direction
3
Transfer faces
between mold
areas
4
Create Slider
Pulling Direction
5
Split faces
between mold
areas
15 min.
In this step, you will learn how to import your Part to Mold in workbench Core & Cavity Design.
Load: \MasterExercise\Step1\PanHandle.CATPart
10 min.
In this Step, you will learn to define the Main Pulling direction for the Part.
Load: \MasterExercise\Step2\Product1.CATProduct
10 mn
In this Step, you will learn how to transfer faces between different mold areas.
Load: \MasterExercise\Step3\Product1.CATProduct
10 mn
In this Step, you will learn how to create an additional Pulling Direction to handle an undercut
area.
Use as direction the axis of the round hole at the extremity of the handle
Create the Slider area
Transfer lateral faces of the square hole from Open_body Other to
Open_body Slider
Do the same for the inner faces of the round hole
Load: \MasterExercise\Step4\Product1.CATProduct
15 mn
In this Step, you will learn how to split a face between different mold areas.
Load: \MasterExercise\Step5\Product1.CATProduct