Professional Documents
Culture Documents
(SIB) MESSAGES
Objectives
CM
L3
MM SI
Messages
RR
L3 Messages GSM
1. Cell channel description, RACH control parameters
2. Neighbor cells description, NCC permitted ,RACH control parameters
2bis. Neighbor cells description (extension),RACH control parameters
2ter. Additional multiband information , Neighbor cells description (other bands)
3. Location area identification, Cell identity , Control channel description , Cell options , Cell
selection parameters , RACH control parameters
4. Location area identification ,Cell selection parameters , RACH control parameters , CBCH
channel description, CBCH mobile allocation ,SI 4 rest octets
5. Neighbor cells description
5bis. Neighbor cells description (extension)
5ter. Additional multiband information ,Neighbor cells description (other bands)
6. Location area identification , Cell identity Cell options ,NCC permitted
13. GPRS Information, EGPRS Supported, Power control, Network mode.
SI Type 1
Direction : DL
Channel : BCCH
Contents
BCCH Frequency
Available frequencies
RACH Control
parameters as
MAXRET
Cell Barring
Emergency
SI Type 2
Direction : DL
Channel : BCCH
Contents
BCCH frequency
MAXRET
Call re-establishment
control
NCC permitted range
Cell Barring
SI Type 3
Direction : DL
Selection Parameters
Channel : BCCH
Contents ACCMIN
PLMN ID (MCC & MNC) MAX-TX-PWR-UL
Cell ID CRH
LAC
Cell reselection
CRO
MFRMS
AGBLK
PT
Mapping Method
ATT TO
T3212 Half rate support
RL_timeout SI scheduling
SI Type 3
SI Type 4
Direction : DL
Channel : BCCH
Contents
PLMN ID (MCC & MNC)
Cell ID
LAC
Cell Selection Parameters
Cell Reselection Parameters
SI Type 5
Direction : DL
Channel : SACCH
Contents
BA list
SI Type 6
Direction : DL
Channel : SACCH
Contents
GPRS Information
Cell ID
LAC
PLMN ID
RL timeout
DTX info
Band
SI type 13
Direction : DL
Channel : BCCH
Contents
GPRS Information
EGPRS Supported
Power control
Network Mode
3G WCDMA SIB MESSAGES
SIB1:
Contains the system information for NAS and the timer for UE
SIB2:
Contains the URA information
SIB3:
Contains the references for cell selection and cell re-selection
SIB4:
Contains parameters for cell selection and cell re-selection while UE is in connecting mode
SIB5:
Contains parameters for configuring the common physical channels
SIB6:
Contains parameters for configuring the common physical channels while UE is in connecting mode
SIB7:
Contains the uplink interference level and the refreshing timer for SIB7
3G WCDMA SIB MESSAGES Cont.
SIB8:
Contains the CPCH static information
SIB9:
Contains the CPCH dynamic information
SIB10:
Contains information to be used by UEs having their DCH controlled by a DRAC procedure
Used in FDD mode only
To be used in CELL_DCH state only
Changes so often, its decoding is controlled by a timer
SIB11:
Contains measurement controlling information
SIB12:
Contains measurement controlling information in connecting mode
SIB13:
Contains ANSI-41 system information
3G WCDMA SIB MESSAGES Cont.
SIB14:
Contains the information in TDD mode
SIB15:
Contains the finding position service information
SIB16:
Contains the needed pre-configuration information for handover from other system to UTRAN
SIB17:
Contains the configuration information for TDD
SIB18:
Contains the PLMN identities of the neighboring cells
To be used in shared networks to help with the cell reselection process
System Information Block Type 1
SIB-2 Common and shared channel configuration, RACH related configuration are present
SIB-3 Parameters required for intra-frequency, inter-frequency and I-RAT cell re-selections
SIB-10 ETWS (Earthquake and Tsunami Warning System) information (Primary notification)
SIB-11 ETWS (Earthquake and Tsunami Warning System) information (Secondary notification)
SIB18:
contains PLMN identities of neighbouring cells to be considered in idle mode as well as in connected
mode. ontains measurement controlling information
SIB19:
Contains EARFCN, Bandwidth, priority value, QRxLevMinEUTRA, threshXhigh, threshXlow,
EUTRAdetection.