Professional Documents
Culture Documents
a) 0.02 kPa
b) 20 Pa
c) 20 kPa
d) 200 N/mm²
e) 20 MPa
a) 20 N/mm²
b) 10 N/mm²
c) 10 kPa
d) 200 kN/m²
e) 20 MPa
Will the total shear force over the anchor length be equal to
the total tensile force σtensile A in the bar?
Will the total shear force over the anchor length be equal to
the total tensile force σtensile A in the bar?
P
A
PBC 30 kN
• Since the cross-sectional area of the bar is constant, the largest
average normal stress is
PBC 30103
BC 85.7 MPa (Ans)
A 0.0350.01
fail A
V
F .S .
allow allow
al fail 70 MPa respectively, and the failure shear stress for each
pin is 900 MPa , determine the largest load P that can be
fail
• For rod AC, FAC st allow AAC 340106 0.012 106.8 kN
106.82 171 kN
• Using Eq. 1, P 1.25
63.02 168 kN
• Using Eq. 2, P 0.75
• When P reaches its smallest value (168 kN), it develops the allowable
normal stress in the aluminium block. Hence,
P 168 kN (Ans)
a) C>B>D
b) C>D>B
c) B>C>D
d) D>B>C