Professional Documents
Culture Documents
ISOLATE COMPONENT
AND THEN SAVE AS
DISPLAY STATE
MOUSE GESTURE WHEEL
RIGHT CLICK AND DRAG TO MAKE WHEEL APPEAR
SHORTCUT BAR
TYPE S AND THE SHORTCUT BAR APPEARS
ORIENTATION VIEWS
HIT SPACEBAR TO BRING UP COMMON ORIENTATION VIEWS MENU
HIDE AND SHOW EDGES
Toolbar Button
The Hide Edge and Show Edge buttons are merged into one button: Hide/Show Edges .
Edge Selection
You can use the following methods to select edges when using the Hide/Show Edges tool:
Another
A sketched
sketched
spline appears
3.Rotate the part, then click the opposite (inside) face of the part.
spline
at the appears
on the insideof
intersection
face.
the plane and
the top face.
You can also select the part in the FeatureManager design tree. A sketched spline appears on every face where the plane inters
4.Click Tools, Measure and measure the distance between the two sketched splines.
DEFAULT TEMPLATES
Specify the folder and template file for automatically created parts, assemblies, and drawings. For example, when you
import a file from another application or create a derived part, the default template is used for the new document.
To prepare a template for use as a default, create the document template, add it to a template tab, and specify the
template location.
In the New SolidWorks Document dialog box, select the template you prepared and click OK.
Select:
Click OK.
Click Reset to restore factory defaults for all system options or only for options on this page .