Analysis CHAPTER 8: HVAC Cooling and Heating Load Analysis Modeling Spaces for Analysis • Placing Spaces – Linked building model • Can define the boundaries of spaces by setting its Room Bounding parameter – Manual placement – Automatic placement • Any area larger than ¼ sq. ft. that is bounded on all sides by a bounding element • Unwanted spaces can be easily removed by using a schedule or the System Browser
CHAPTER 8: HVAC Cooling and Heating Load Analysis
Modeling Spaces for Analysis • Space Schedule – Useful for managing space data in a single, easy access location • Space Properties – Space type chosen from preset list – Engineering criteria per type can be customized
CHAPTER 8: HVAC Cooling and Heating Load Analysis
Modeling Spaces for Analysis • Modifying Space Properties – Values can be edited for specific building types – Default values (based on space style) for People and Heat Gain (per person) can be replaced with custom values
CHAPTER 8: HVAC Cooling and Heating Load Analysis
Modeling Spaces for Analysis • Zones – Service Type • System that will serve the zone – Various preset types available – Coil Bypass • Input any manufacturer’s bypass – Cooling and Heating Information • Set point, Leaving air temp, humidity control – Outdoor Air • Ventilation loads • Largest value used in calculation
CHAPTER 8: HVAC Cooling and Heating Load Analysis
Modeling Spaces for Analysis • Building Construction – Default <Building> settings applied to all spaces unless specified otherwise
– Data from architectural model does
not transfer to MEP model
– Custom construction types can be
made for specific space requirements
CHAPTER 8: HVAC Cooling and Heating Load Analysis
Performing Analysis • Load Analysis – Done by Radiant Time Series calculation
– Building energy parameters
• Building type • Location • Building service • Construction and infiltration • Sliver space – Set tolerance for areas to be ignored
– Visualization of analysis model
CHAPTER 8: HVAC Cooling and Heating Load Analysis
Performing Analysis • Weather Data – Location can be chosen from a preset list of cities or by map selection
– Data taken from nearest weather station to
selected project location
– Manual overrides if necessary
• Outdoor Air Infiltration
– Loose, Medium, or Tight depending on construction CHAPTER 8: HVAC Cooling and Heating Load Analysis Performing Analysis • Analysis Report – Report Type • Simple, Standard, or Detailed depending on how much information you require
– Project Summary
– Building Summary
– Level Summary
– Individual Zone and Space
CHAPTER 8: HVACdata Cooling and Heating Load Analysis Performing Analysis • Export to gbXML – gbXML can be used by many third-party analysis programs – Export dialog is similar to analysis dialog • Export Default Values will use values for defined in project for people, lighting, constructions, and so on • Export Complexity – Simple – Simple With Shading Surfaces – Complex – Complex With Shading Surfaces – Complex With Mullions and Shading Surfaces