Professional Documents
Culture Documents
1. Driver
• Common Installer
• GDI Printer Driver
• Twain, WIA (SM) SmarThru4
• Mac Printer/Twain
• Linux drivers
2. Firmware
3. Hardware
4. Mechanism
S CX-4200 S eries
Driver
Common Installer
Agenda
Objectives
procedure map
Ⅰ. Installation Procedure Map – Typical Installation
Welcome
Install Components
Select Installation Type Copy Files
Test Print
Typical
Connect Device
Repair
Connect Device
Remove
Objectives
details
Ⅱ. Common Installer Dialog Details - Installation
Welcome Dialog
Connect Device
Select Components
Note: The supported component is depending Change Destination Folder: User can change the
on Model
destination folder with using this button.
Ⅱ. Common Installer Dialog Details - Installation
Test Print
Maintenance
3. Click “Maintenance”
Ⅱ. Common Installer Dialog Details
During the installation of a printer, the installer creates “Dr. Printer” short-cut in the desktop of
a user’s computer.
When “Dr. Printer” short-cut is executed, it opens a homepage of the Samsung Dr. Printer.
The Samsung Dr. Printer makes easy for users to diagnose the printer and update software.
Ⅲ. Trouble Shooting
Objectives
1. Start -> Settings -> Control Panel -> Printers should be checked to
the “Set as Default
2. Whether connected printer is the default printer? Printer”
Check Port
4. Computer has multiple USB ports, do re-install driver after plugging in device with USB cable.
Ⅲ. Trouble Shooting
1. Start -> Settings -> Control Panel -> Administrative Tools -> Services
2. Check whether Print Spooler and Remote Procedure Call service are running. If these services are not
running, start these services.
If the PnP dialog prompts the user to locate specific files during installation
Designate the printer driver files or scanner driver files directory in the CD.
Ⅲ. Trouble Shooting
1. Start -> Settings -> Control Panel -> Administrative Tools -> Services
2. Check whether Print Spooler and Remote Procedure Call service are running. If these services are not
running, start these services.
Ⅲ. Trouble Shooting
2. Select Properties
If you want to ask about pending problem to the head office, please attach the information
file of the computer in which the problem occurs.
driver?
driver?
1. Introduction to Printing
Driver
1-2. Printer driver
Is a software on PC.
ㆍAssists to render a print job with GDI, and sends the rendered data stream to the
print spooler.
E *t600R &u600D *r0F &l0O &l0S &l0H &l26a8c1E *p0x0Y *c0t5594x8201Y &l1X *b0M $PJL EOJ
PS (PostScript)
SPL PCL PS
No standard HP Adobe
(Can’t use other
company’s driver)
Bitmap Based Command Based Command Based
2-1. Overview
Language Frame
App. 1 GDI 2 Driver 5
Monitor buffer
3 4 6
Port 7
Spooler Printer
Monitor
Windows component
Driver component
• Driver Component
Spooler
Windows XP
64bit Edition
Language
Monitor
• Rendering Component
Language Port
Monitor Monitor
Dark Text
I. What is TWAIN?
II. TWAIN Architecture
III. How to work?
IV. TWAIN Driver Interface
V. Scan Resolution
VI. Component Detail Specification
VII. Troubleshooting
I. What is a TWAIN?
1. What is Twain?
1-1. Concept
1. What is Twain?
1-1. Concept
2. TWAIN Architecture
3. How to work?
Click!
Toolbox
Information
IV. Samsung TWAIN Driver Interface
4-3. Adjustment
4-4. Filters
Filters allow you to improve image quality by applying
some visual effects.
Sharpness: To sharpen your image and improve its
clarity. With Sharpness you can make the finest details
look more clearly.
4-5. Preferences
4-6. About
To view the information about this software.
V. Scan Resolution
Color Gray B/W
Resolution
5. Scan Resolution 24bit 8bit 8bit Lineart Halftone
75(Draft) O △ O O O
100 O △ O O O
150 O △ O O O
200 O △ O O O
300(Normal) O △ O O O
400 △ △ △ △ △
500 △ △ △ △ △
600 O △ O O O
700 △ △ △ △ △
800 △ △ △ △ △
1000 △ △ △ △ △
1200(Best) △ △ △ △ △
1400 △ △ △ △ △
1800 △ △ △ △ △
Image Type
- True Color (24bit), 256 Color, Gray(8bit), B/W Lineart and Halftone
Resolution
- Optical resolution : 75, 100, 150, 200, 300, 600 dpi
- Enhance resolution : ~ 4800 dpi
Document Source
- Flatbed
- ADF Simplex
Image Area
- English : Letter
- Others : A4
Unit
- English: inch
- Others : mm
I/O Support
- USB : (V1.1, V2.0) – USB 2.0 is recommended
- Parallel ECP Mode
OS
- Win 98SE / ME
- Win NT / 2K / XP / 2003
VII. Troubleshooting
First of all, You must check the BIOS setting of PC which Parallel mode is “ECP”
mode or not. Our Twain driver only supports “ECP”.
Windows doesn’t not support USB driver. So our Twain driver does not support
USB mode in Windows NT
SCX-4200 Series
Driver
WIA
Agenda
I. What is WIA?
II. How to use?
III. User Interface
IV. Applications
I. What is a WIA?
1. What is WIA?
1-1. Concept
2. How to use?
2-1. The steps for scanning with Scanners and Cameras Wizard
1. Load the document(s) face up with top edge in first into the ADF or Place a single
document face down on the scanner glass.
2. From the Start menu on your desktop window, select Settings, Control Panel and
then Scanner and Cameras.
3. Double click your machine. The Scanner and Camera Wizard launches.
4. Choose your scanning preferences and click Preview to see how your preferences
affect the picture.
5. Enter a picture name, and select a file format and destination to save the picture.
6. When the picture is successfully copied to your computer, you can choose to keep
working with the picture. Follow the on-screen instructions.
III. User Interface
3-1. Characteristics
4. Applications
I. What is SmarThru4?
II. SmarThru4 Architecture
III. Improvements
IV. How to work?
V. FAQ
VI. Troubleshooting
I. What is SmarThru4?
Objectives
SmarThru4
I. What is SmarThru4?
Scan To
Image Edit
Copy
Print
I. What is SmarThru4?
Windows 98/Me/NT4.0
- Processor: Pentium III 933MHz or more
- Memory: 256MB or more
- Free hard disk space: 500MB or more
- Internet Explorer: 5.0 or higher
Windows 2000/XP
- Processor: Pentium III 1.5GHz or more
- Memory: 512MB or more
- Free hard disk space: 500MB or more
- Internet Explorer: 5.0 or higher
Objectives
architecture of SmarThru4
II. SmarThru4 Architecture
Modules with UI
MFP Control Panel UI Modules without UI
Image converter
Configuration Image Browse Shared
Lead tools PDF manager UI component
(TIFF,JPEG,etc)
III. What’s Improvements?
Objectives
improvements issues of
SmarThru3
III. What’s Improvements?
By Usability Verification.
Convenient COPY
PC COPY firmware added.
Web Album
Samsung web server provided.
Special Print
Various Image Album layout.
IV. How to Work?
Objectives
of Smarthru4
IV. How to Work?
1. Scan To
1. Scan To
2. Scan
2. Image
2. Image Editor
2. Image
3. Copy
3. Copy
4. Print
4. Print
Install/Uninstall
Tioga
Mac OS X
We supported once, currently does not use because of
performance issue.
CUPS
Common Unix Printing System
Mac OS X, beginning in version 10.2.4, uses the CUPS. But it
is unstable.
There is stable in Mac OS X 10.3.
1-2. CUPS Architecture
Eiger driver provides PPD and Filter (The other modules are
belongs to OS)
The filter generates printer data from raster Image made by the
RIP PDF Job
spool file Ticket PPD
RIP
1-3. Macintosh Printer driver
PS Driver
Raster Driver
2-1. Overview
Choose USB
Click Add.
2-2. Printer Driver Install
Default Printer
Select ‘SCX-4200’ to your Printer List and choose a ‘Make Default’, then it
becomes the default printer.
2-3. Printer Driver Uninstall
Deleting a Printer Driver in Printer List
You can delete printer driver that it doesn’t appear in the Printer List.
-> Select the ‘SCX-4200’ in Printer List and choose a ‘Delete’.
★ Even if you uninstall the printer driver from Install Program, automatically
printer is not deleted. -> Delete a printer by hand.
2-4. Printer Driver Setup
Page Setup
File-> Page Setup…
Document has a default page setup that includes its paper size, orientation, and
scaling.
New document create automatically formatted to fit a specific paper size.
-> New paper size to be the default at any time from the “Save As Default”.
2-4. Printer Driver Setup
Print Setup (Copies & Pages)
File-> Print… -> copies & Pages
Copies
Collated Copy
Pages
2-4. Printer Driver Setup
Print Setup (Layout)
File-> Print…-> Layout
Pages per Sheet
- You can specify how many pages to print per sheet. The default is 1.
The available options are: 1/2/4/6/9/16
Layout Orientation
- Select the order and placement of the pages on the sheet.
Border
- To print border around each page on the sheet.
2-4. Printer Driver Setup
Print Setup (Output Options)
File-> Print…-> Output Options
Save as File
- You can save a document in Portable Document Format (PDF) or PostScript
format. If PostScript, your document is saved as a PostScript Level 2 file in ASCII
format.
2-4. Printer Driver Setup
Print Setup (Scheduler)
File-> Print…-> Scheduler
- Now : The printer prints a job immediately.
- At : The printer prints a job at the time you set in the field.
- On Hold : The printer holds a print job in the print queue until you are ready to
release it.
- Select a priority for your print job on the priority drop-down list.
2-4. Printer Driver Setup
Print Setup (Paper Handling)
File-> Print…-> Paper Handling
All pages - (from the first page to the last)
Odd numbered pages - (only odd numbered pages)
Even numbered pages - (only even numbered pages)
Reverse page order - (from the last page to the first)
2-4. Printer Driver Setup
Print Setup (ColorSync)
File-> Print…-> ColorSync
ColorSync provides an easy way to ensure accurate color in your images.
Quartz Filter
- You can modify the images in your printed documents by adding a Quartz filter
to your printer output.
2-4. Printer Driver Setup
Print Setup (Paper Feed)
File -> Print…-> Paper Feed
The printer automatically selects the correct tray based on the paper size.
- Auto Select automatically selects the correct Paper Source
based on the Paper Size.
- Manual selects the print manually from the Manual Tray.
2-4. Printer Driver Setup
Print Setup (Paper Feed for first page)
File -> Print…-> Paper Feed
- You can select another paper source for first page.
2-4. Printer Driver Setup
Print Setup (Paper Type)
File-> Print…-> Printer Features -> Paper Type
- Use the Paper Type drop-down list for selecting the type of paper loaded
in the tray from which you want to print.
- The default value is Printer Default.
- Printer Default will rely on the engine's paper detection mechanism to sense
the paper type. .
2-4. Printer Driver Setup
Print Setup (Resolution)
File-> Print…-> Printer Features -> Resolution
- Resolution defines the quality of the print output in simplest form: the number
of dots per inch.
- Resolutions available are 600 dpi (Normal) and 300 dpi (Draft).
The default value is 600 dpi (Normal).
2-4. Printer Driver Setup
Print Setup (Summary)
File-> Print…-> Summary
- The Summary tab displays a summary of selected features in other tabs.
2-5. Printer driver issues
-Only printing the border when Pages per Sheet is more than 2.
-OS support this features.
Scheduler
- Real printing time is related on OS environment.
- If you insert the time by keyboard, change the Priority, and then print the
document, you’ll see that the time is changed to current time.
OS bug, We reported it to the Apple.
Scale
-If you change the Scale and print some document at PowerPoint.
-Some times you can see the following message.
I. What is TWAIN?
II. TWAIN Architecture
III. How to work?
IV. TWAIN Driver Interface
V. Scan Resolution
VI. Component Detail Specification
VII. Troubleshooting
I. What is a TWAIN?
1. What is Twain?
1-1. Concept
1. What is Twain?
1-1. Concept
2. TWAIN Architecture
3. How to work?
Click!
Information
Area
IV. Samsung TWAIN Driver Interface
4-3. Adjustment
4-4. Filters
Filters allow you to improve image quality by applying
some visual effects.
Sharpness: To sharpen your image and improve its
clarity. With Sharpness you can make the finest details
look more clearly.
4-5. Preferences
4-6. About
To view the information about this software.
V. Scan Resolution
Color Gray B/W
Resolution
5. Scan Resolution 24bit 8bit 8bit Lineart Halftone
75(Draft) O △ O O O
100 O △ O O O
150 O △ O O O
200 O △ O O O
300(Normal) O △ O O O
400 △ △ △ △ △
500 △ △ △ △ △
600 O △ O O O
700 △ △ △ △ △
800 △ △ △ △ △
1000 △ △ △ △ △
1200(Best) △ △ △ △ △
1400 △ △ △ △ △
1800 △ △ △ △ △
2400 △ △ △ △ △
O Support Optical Resolution ( 600* 1200 )
3000 △ △ △ △ △
△ Support Software Enhance Resolution 3600 △ △ △ △ △
4200 △ △ △ △ △
X Not Support
4800(Maximum) △ △ △ △ △
VI. Component Detail Specification
6. Component Detail Specification
Image Type
- True Color (24bit), 256 Color, Gray(8bit), B/W Lineart and Halftone
Resolution
- Optical resolution : 75, 100, 150, 200, 300, 600 dpi
- Enhance resolution : ~ 4800 dpi
Document Source
- Flatbed
- ADF Simplex
Image Area
- Letter, A4, Statement, ETC
- Default Image Area depend on OS System Preference
Unit
- Unit (cm, mm, inch, pixel, Point, Pica)
- Default Unit depend on OS System Preference
I/O Support
- USB : (V1.1, V2.0) – USB 2.0 is recommended
OS
- OS X (10.2, 10.3)
VII. Troubleshooting
1. Install
2. Uninstall
3. Using Configurator
4. Scan Features
5. Print Features
6. Help System
1. Install
• Install
• The user should login as root for installation.
• When the CD is inserted, autorun will be executed
on the desktop.
1. Install
• Install
• After click Install button, welcome window is
displayed.
1. Install
• Install
• Progress bar shows the current status of
installation.
1. Install
• Install
• The following screen shows that installation was
successful.
1. Install
• Install
• Now, MFP Configurator icon is displayed on the
user’s desktop.
2. Uninstall
• Uninstall
• To uninstall the driver package, the user need to
insert CD.
2. Uninstall
• Uninstall
• When the user selected Uninstall, the setup will
proceed uninstallation.
2. Uninstall
• Uninstall
• Progress bar below shows the status of
uninstallation.
2. Uninstall
• Uninstall
• Now, all of the drivers are uninstalled.
3. Using Configurator
• Using Configurator
• When the user executed MFP Configurator on the
desktop icon, the following window will be shown
up.
3. Using Configurator
• Using Configurator
– Manage printer queue
• The user can add / remove the printer queues and
spooling jobs with Configurator.
– Manage ports
• The user can check the status of parallel and USB
ports with Configurator.
• The user can release the port so that it can be
available.
– Scan
• The user can perform scan feature using
Configurator.
– Test Print
• The user can print a test page.
3. Using Configurator
• Using Configurator
• When the user click “Test…”, the following menu
will be shown.
• After click the “Start”, he will get a test page.
3. Using Configurator
• Using Configurator
• When the port icon is clicked during the printing
process, Configurator will display that the current
port is busy.
3. Using Configurator
• Using Configurator
• While the port is busy, the scanner will not be able
to scan.
3. Using Configurator
• Using Configurator
• In this case, you need to release the port in the
port module tab.
• Otherwise, you can just wait a while until the port
is released.
3. Using Configurator
• Using Configurator
• After the port is released, the scan feature is
available now.
• If you click the “Properties…” button, the scan
window will be shown.
4. Scan Features
• Scan Features
• When the scanner properties window is executed,
you can select Preview and Scan function with
appropriate properties.
4. Scan Features
• Scan Features
• After inserting a page in the document feeder and
clicking “Preview”, you can get the preview image
on the right side.
4. Scan Features
• Scan Features
• You can use mouse pointer with dragging to
select the area where you want to scan. You may
let the selected area as it is to scan the whole
page.
4. Scan Features
• Scan Features
• If the scanning was successful, the Image Editor
will be executed automatically so that you can edit
and save the scanned image.
5. Print Features
• Print Features
• When you command lpr by clicking Print on most
application, the following UI will be shown up. You
can select the printing options on it.
5. Print Features
• Print Features
• By clicking “Properties…” button on the main
window, you can find the properties window. You
can select more features on it. Each of the feature
is described in the help.
6. Help System
• Help System
• If you click the “Help” button on each window, the
appropriate help will be shown on the help viewer.
6. Help System
• Help System
• You can also browse the topics when you click the
button below.
SCX-4200 Series
Firmware
(System software)
Contents
I. Specification
II. Function
III. Maintenance
Ⅰ. Specification
Objectives
Review
SCX-4200 gives the image acquisition ability by using of Color CIS module for
copy, scan
Objectives
Comprehension of Functions
Ⅱ. Function – User Interface
Ⅱ. Function – LED
Contents
1. Setting Options
2. Using Special Copy Features
Ⅱ. Function - Copy
1. Setting Options
1. Reduce / Enlarge
4. Special Copy
5. Toner Save
6. Paper Setting
7. Copy Setup
8. Report
9. Machine Set up
10. Maintenance
Ⅱ. Function - Copy
Clone Copying
2-up Copying
Poster Copying
When user selects the photo mode (original type) in Legal and Folio size, it will be
the Text/Photo mode.
Ⅱ. Function - Copy
- To provide the copies which are printed both sides of ID card in a paper
- Image Reduction
- Rotation
If paper size is larger than A4, paper size sets “Letter”.
Ⅱ. Function - Copy
- To provide the copies which are printed partial and enlarged image.
- Partition (3 by 3)
- Enlargement
Ⅱ. Function - Scan
From the Samsung SmarThru software: Launch Samsung SmarThru and open
the Scan Wizard to begin scanning.
From TWAIN-compliant software: You can use other software including Adobe
Photo Deluxe and Adobe Photoshop.
NOTES:
To scan with your machine, you must install the MFP driver.
Scanning is done through the same LPT or USB port currently assigned for
your printer port.
Ⅱ. Function - Print
NOTES:
To print with your machine, you must install the MFP driver.
Review
What is the special copy function to provide the copies which are printed with
2-page documents?
Contents
2. Clearing Settings
If there are streaks or spots on your print, You can clear the OPC drum of the
cartridge.
Ⅲ. Maintenance
4. Tech mode
=> This information contained herein is for reference use only
It can examine the DRAM which is mounted in Main PBA or Extension DIMM.
Use this feature to test the machine's DRAM. The result appears in the LCD display.
If all memory is working normally, the LCD shows << O K >>
Use this feature to test the machine's ROM. The result and the software version
appear in the LCD display.
If the copy image quality is unsatisfied, perform the function to check the condition of the
print out for checking whether or not having Scanner trouble.
Ⅲ. Maintenance
When the Scan job start, it needs a position for starting to scan. This position
bases on the Home Position.
- When Power is on
- Whenever Image sensor is returned
In Error
: Display “SCANNER ERROR” on the LCD
Check point
: Check lamp and cable condition
: Check Motor condition
SCX-4200 Series
Hardware
Agenda
Ⅰ. Introduction
Ⅱ. Main PBA
Ⅲ. OPE PBA
Ⅳ. SMPS PBA
Ⅰ. General Specification
Objectives
5V
FAN 2
Thermistor 24V/5V T S D C
TRIAC SMPS R R R R
Fuser HVPS
Thermostat
P/Empty MP Exit Feed Cover
Sensor Sensor Sensor Sensor Open S/W
Objectives
PBA in SCX-4200
Ⅱ. Main PBA
2-1. General description
Main PBA employs Chorus2 as an ASIC, which is developed for LBP Printer
1 7
9 2 3 4 15 6 7 20 21 8
10 11 12 5 16 17 18 14 19 13
Ⅱ. Main PBA
2-1. General description
The S3C46Q0X is developed using ARM7TDMI core, 0.18m CMOS standard cell, and memory cell.
- 1.8V internal, 3.3V external (I/O boundary) microprocessor with 4KByte Cache
- Image Processor
- On-chip clock generator with PLL
- Memory & External Bank Control
- DMA Control (5-channel)
- Interrupt Control
- 2-port USB Host /1- port USB Device (ver 2.0) Interface Control
- UART (2 Channel)
- Synchronous Serial Interface Control
-Timer (4 Channel)
- Watch Dog Timer
- Power control: Normal, Slow, Idle, Stop and SL_IDLE mode
- A/D Converter (10-bit, 2 Channel)
- General I/O Port Control
- Print Head Control
- Carrier Motor Control
- Paper Motor Control
- Tone Generator
- RTC with calendar function
- S/W Assistant function( Rotator )
Ⅱ. Main PBA
2-3. CPU (Chorus2)
Block diagram
Bus Arbiter
Write
Buffer PRT_TOP
UART (2-ch)
Rotator
HP SIO
RTC
(Real Time Clock) Tone Generator
CRCON
LFCON
CRFIRE
LSU I/F
Parallel Port
(P1284)
Ⅱ. Main PBA
2-4 Flash Memory (as ROM) : AM29LV800
Storing the systems Circuit Diagram of Flash Memory
program and downloading
the system program
through the PC interface.
AM29LV800
Capacity : 8 Mbyte
( K4S641632H-TL75)
CIS Module radiates the light by LED to the document, then according to LED,
the reflection signals are divided with R,G,B data. The RGB data (analog signal)
convert into digital signal through ADC ,then the digital signal is transmitted to
Chorus2 Image Processor Block.
Image Scanning Process
Light Source
Image Sensing Signal Receiving
Transfer
Rod Lens
Vout
N
Shift Register
LED Timing for Color Reading
OPE board is consisted of various function keys and LCD to display an operation of key.
OP micom(48C05) is 8-bit micro controller device designed for multiple I/O control. It creates a panel
circuit with LCD and other devices. A communication method with a CPU of a main board is UART( TXD-
transmit, RXD-receive).
Copies 1-99
OK This key is used to select the right item what customer wants from several items.
■ UART TX format :Codes for change of keys are transmitted in single code,
and OK or error message to check if communication is performed properly are
also transmitted in single code.
Micro
Processor
Main
Controller
FUSER INTERFACE
Supply
Cha. Dev.
OPC
Clean
LSU HVPS
HVPS creates the high voltage of THV/MHV/Supply/Dev and supplies it to the developer part for making
best condition to display the image. The HVPS part takes the 24V and outputs the high voltage for THV/MHV/BIAS,
and the outputted high voltage is supplied to the toner, OPC cartridge, and transfer roller.
SMPS( Switching Mode Power Supply ) HVPS (High Voltage Power Supply )
IV. SMPS & HVPS PBA
4-3. SMPS & HVPS Spec.
1) Transfer High Voltage(THV+)
- Input Voltage: 24 V DC ±15%
- Output Voltage: MAX +5.0KV ± 5%(Duty Variable, no loading)
-1.0KV ± 15%(when clearing, 200Mohm)
- Output Voltage Trigger :6.5 µA
- Input contrast of the Voltage stability degree under ± 5%(fluctuating input
21.6V~26.4V)
Loading contrast : ±5% or less
- Output Voltage Rise Time : 100ms Max
- Output Voltage Fall Time : 100ms Max
- Transfer voltage range as environment variable :+650V(Duty 90%) ~5KV(Duty 10%)
- Environment Recognition Control Method :The THV-PWM ACTIVE transfers active
signal. It detects the resistance by recognizing the voltage value, F/B, while
permits the environmental recognition voltage.
- Output Voltage Control Method :Transfer Output Voltage is output and controlled
by
changing the Duty cycle of the THV PWM Signal. 90% Duty:+650V, 10% Duty:+5KV
± 5%
2) Charge Voltage(MHV)
- Input Voltage: 24 V DC ±15%
- Output Voltage: -1.3KV ~ -1.8KV DC ±50V
- Output Voltage Rise Time : 50ms Max
IV. SMPS & HVPS PBA
4-4. SMPS & HVPS Spec.
- Output Voltage Fall Time : 50ms Max
- Output Loading Range : 30M ohm ~1000M ohm
- Output Control Signal(MHV-PWM):CPU is HV output when PWM is LOW
3) Clearing Voltage(THV-)
- The(+) Transfer Voltage is not output because the THV PWM is controlled with high.
- The(-) Transfer Voltage is output because the THV –Enable Signal is controlled with
low.
- The output fluctuation range is big because there is no Feedback control.
4) Developing Voltage(DEV)
- Input Voltage: 24 V DC ±15%
- Output Voltage: - 200V~600V DC ±20V
- Output Voltage Fluctuation range: PWM Control
- Input contrast of the output stability degree ± 5% or less
Loading contrast : ±5% or less
- Output Voltage Rise Time : 50ms Max
- Output Voltage Fall Time : 50ms Max
- Output Loading range : 10M ohm ~1000M ohm
- Output Control Signal(BIAS-PWM): the CPU output is HV output when PWM is low.
5) Supply
- Output Voltage: -400V ~ 800V DC±50V(ZENER using, DEV)
- Input contrast of the output stability degree under ±5%
SCX-4200 Series
Mechanism
Agenda
I. General Specification
II. Process
III. Disassembly
IV. Troubleshooting
Ⅰ. General Specification
Objectives
Copy
Ⅰ. General Specification
Review
Objectives
B. Scanner Part
A. Engine Part
Ⅱ. Process
A. Engine Part
LSU
Fuser
4
Toner Cartridge
2
8 7 5
1. Printing Process
ORIGINAL CONVERT TO
DOCUMENT THE PRINTER ELECTRICAL
PC DRIVER LANGUAGE SIGNAL
CONVERT TO THE
BITMAP IMAGE
RECOVERY TO THE
ORIGINAL IMAGE
5.FIXING
4.TRANSFER
Ⅱ. Process
3. System Layout
3-1. Feeding Section
Feeding Method : Universal Cassette Type
Feeding Standard : Center Loading
Feeding Capacity : Cassette 250 Sheets(75g/㎡, 20lb Paper Standard)
Manual 1 Sheet(Paper, OHP, Envelope, etc.)
Paper Detecting Sensor : Photo Sensor
Paper Size Sensor : None
Sheet-Guide paper, Sheet-Sub Cassette
Ⅱ. Process
3. System Layout
3-2. Transfer Ass’y
Life Span : Print over 50,000 Sheets(in 15~30℃)
Ⅱ. Process
3. System Layout
3-3. Driver Ass’y
By driving the motor, it supplies power to the feeding unit, the fusing unit,
and the distributing unit.
In SCX-4200 Series, Latch Gear is used for an easy Jam Removal at
Gear Drv Fuser
Ⅱ. Process
3. System Layout
3-4. Fuser Ass’y
Halogen Lamp - Control the Fusing Temperature by Heating (Receptacle type)
Thermostat - Temperature Intercepting Device, Open 170°c (Receptacle type)
Heat Roller - Teflon Coating, Same as ones of Snipe (ML-2010)
Pressure Roller - Silicon, Same as ones of Snipe (ML-2010)
Thermistor - Temperature Detecting Sensor
Ⅱ. Process
3. System Layout
3-5. LSU(Laser Scanner Unit)
Ⅱ. Process
3. System Layout
3-6. Toner Cartridge
Developing Method : Non-magnetic 1 element contacting method
Toner : Non-magnetic 1 element shatter type toner
Toner remaining amount detecting sensor : None
The life span of toner : 3,000 Sheets(IDC Pattern/A4 Standard)
OPC Cleaning : Collect the toner by using electric static + FILM OPC
Management of disused toner : Collect the toner by using electric static
(Non-Cleaner type)
OPC Drum protecting Shutter : None
Ⅱ. Process
B. Scanner Part
1. Layout
Scan Method : 600dpi Color CIS Module
Maximum Scan Width : 216 mm (width of Letter Size)
Effective Scan Length : 297 mm
Scan Line Time : 1.637 msec(mono)
TIMING BELT
SCAN LOWER
MOTOR ASS’Y
CIS
SLIDER-CIS
SHAFT CIS
COVER PANEL
Ⅱ. Process
2. Panel Functions
Ⅱ. Process
Review
Objectives
Review
Objectives
1. Paper Jams
Ⅳ. Troubleshooting
1. Paper Jams
1-1. Paper Jam0
Ⅳ. Troubleshooting
1. Paper Jams
1-2. Paper Jam1
Check and Cause Solution
1. If the recording paper is 1. Replace the SMPS.
jammed in
front of or inside the
fuser. 2. Reassemble the
Actuator-Feed
2. If the recording paper is and Spring-Actuator
stuck in if the return is bad.
the Fuser just after
passing through
the Actuator Feed, Feed
Actuator
may be defective.
Ⅳ. Troubleshooting
1. Paper Jams
1-3. Paper Jam2
Ⅳ. Troubleshooting
2. Paper Multi-feeding
Ⅳ. Troubleshooting
3. Copy Problems
3-1. Abnormal noise
3. Copy Problems
3-2. Defective Image Quality
Ⅳ. Troubleshooting
3. Copy Problems
3-3. Multi Feeding
Ⅳ. Troubleshooting
Review
Review