Fabrication Parts • Configuring the System – Autodesk Fabrication tools need to be installed separately – Generic or manufacturer-specific libraries must be loaded
• Adding Services – Services can be loaded and unloaded
CHAPTER 23: Fabrication
Identifying Fabrication Parts • Placement Options for Parts – Lengths are pre-assigned – Sizes are from catalog – Product data is defined in external database
• Parts are grouped in Dialog
– Runs and fittings are grouped together
CHAPTER 23: Fabrication
Fabrication Parts • Fabrication Parts Organization – Select the service required – Then select group
CHAPTER 23: Fabrication
Modifying Fabrication Parts • Constrained Dimensions – When connected, Height and Width are locked – Length variable – Connectors predefined and can be changed post placement
CHAPTER 23: Fabrication
Creating a Cable Tray Run • Open RMEP2016_Ch24_Electrical Dataset.rvt. • Open the 3D view Cable Tray and Conduit and the section Section 4. Tile the views. • Activate the section; from the Fabrication Parts dialog box, choose the service ADSK-Electrical Select Containment: High Voltage and the group Ladder; and then select a straight run. Before placing, make sure you change the length to 2'-0" (600 mm).
CHAPTER 23: Fabrication
Creating a Cable Tray run • Select the 90-degree Outside Riser and connect to the vertical ladder in the 3D view.
• Next, you want to place an equal tee, although on
placement its orientation may not be correct. Here you can use the Toggle Connector tool or the up arrow on your keyboard to rotate the part and then click to place.
CHAPTER 23: Fabrication
Creating a Cable Tray run • Add two straight sections—make sure the length is set to 8'-6" (2550 mm)—and then a 90 Inside Riser to the right-side end of the run. • Add a 7'-0" (2100 mm) vertical straight run and then another equal tee, making sure the connector is pointing toward the window. Finally, add a straight run that passes over the window.
CHAPTER 23: Fabrication
Creating a Duct Fabrication Layout • Open RMEP2016_Ch24_Simple Fabrication.rvt. • Zoom into the floor plan 1-Mech so you can see the layout easily. • Click the arrow to open the Fabrication Settings dialog box and add all the HVAC services; then make sure you can see the MEP Fabrication Parts dialog box. • Select ADSK - HVAC: Supply Air from the Service drop-down and select Rectangular from the Group drop-down.
CHAPTER 23: Fabrication
Creating a Duct Fabrication Layout • Select the straight section of duct, before placing it, change Length Option from Auto to Value and Length to 6'-0" (1800 mm). • Connect to the VAV unit (in Space 3) on the right of the model. Hovering over the mechanical connector, the duct fabrication part will snap to the connector. • Even though the default offset for the duct is 0'-0" (0 mm), the fabrication duct connects to the VAV at 10'-0" (2500 mm). • Add a transition. Select the appropriate tool from the dialog box. Change Main Secondary Width to 14" (350 mm) and Main Secondary Depth Option to Equal; this will match the previous duct section.
CHAPTER 23: Fabrication
Creating a Duct Fabrication Layout • Repeat so you have a straight duct run with a 6’-0” long, 14"×12" duct (1800 mm long, 350 mm×300 mm) and a 4'-0" long, 12"×12" duct (1200 mm long, 300 mm×300 mm). End the run with a cap. • Final connections are a combination of fabrication parts and native Revit MEP flexible duct. Change the fabrication group to Round Bought Out and select Flat Shoe. • From the Properties Palette, change the Product Entry size to 8" (200 mm). Revit displays an alignment dashed line by extension to the Air Terminal above.
CHAPTER 23: Fabrication
Creating a Duct Fabrication Layout • Repeat the previous step for the next two air terminals and then connect using the Flex Duct tool from the Systems tab. • With the top row complete, use the Mirror tool from the Modify tab to complete the layout.