You are on page 1of 17

Mobilink Network Strategy Proposal

GSM–WCDMA-LTE

Huawei Mobilink Project Team

Page 1
CONTENTS

1 Network Strategy Introduction

2 Idle Mode Strategy

3 Dedicated Mode Strategy

4 Script Template

Page 2
Capacity &
INTRODUCTION Experience
Coverage
Efficiency Evolution

Network strategy defines the behavior of a UE in intra-RAT


(2G2G, 3G3G,…) and inter-RAT(2G3G,..) inter- Mobility Management
operation in idle mode or connected mode.
Idle Dedicated
Ensure Coverage and Mode
1 Mode
Quality
Goals Of Efficient Balanced Traffic
2
Network Strategy Distribution
Cell Handover Redirection
Efficient Resource Reselection
3 CSFB Fast return
Requirement

We will introduce the network strategy in three Below parts


b

1 Network Strategy in Idle Mode

2 Network Strategy in Connected Mode

3 Template Scripts

Page 3
Idle Mode Strategy

Page 4
IDLE MODE :: 3G RANDOM CAMPING
IDLE MODE SUMMARY
2G->2G 2G->3G 2G->4G 3G->2G 3G U2100<->3G U900 3G->4G 4G->2G 4G->3G 4G->4G

Follow current 2G Rxlevel-3G RSCP>4db for


2G network 1s and GSM Rxlevel>-99dbm

U2100 or U900 ECNO <-10db,start


3G Ec/No>-12db IdleSintersearch
2G Rxlevel > -95dBm 3G RSCP > -
3G and RSCP>- 3G Ec/No<-16db ECNO:
for 1s 104dBm for 1s
102dbm for 5s U900-U2100>1db for 1s, U900->U2100
U900-U2100 >5db for 1s, U2100->U900

Neighbor Cell
4G RSRP>- 4G RSRP > - 4G RSRP < -110dBm 4G RSRP < -
4G 108dbm 108dBm for 1s 110dBm for 1s
RSRP>Serving Cell
RSRP + 3dB for 1s

LTE 1800
L1800 L1800 L1800 L1800
CELLRESELPRIORITY: 5
“Network Strategy in Idle
Mode shows how to choose a UMTS 2100 (capacity) U2100 U2100
suitable cell to reside for a CELLRESELPRIORITY: 3

UE when not in use”


UMTS 900 (coverage)
U900 U900
CELLRESELPRIORITY: 2

Reselection GSM 900 GERANPRI: 1 GSM GSM GSM GSM

Page 5
Idle Mode – GSM To Other Radio Access Technologies
Category Parameter Name Recommended Value
FDDREP EcN0
UTRANPRI 3
2G to 2G Follow same current settings QI 7
2G->3G QSEARCHC 7
2G to 3G Meet following conditions on 3G Cells Reselection/Fa FDDRSCPMIN 6(-102dbm)
 EcNO should be greater than -12 dB st return FDDQMIN 7(-12db)
 RSCP >-12 dBm for 5s FDDQOFF 0
INTERRATINBSCHOEN YES
2G to 4G 4G RSRP should be greater than -108dBm INTERRATCELLRESELEN YES
CELLSELECTAFTERCALLREL YES
INTERRATCELLRESELOPTEN ON
FDDREP EcN0
EUTRANPRI 5
2G->4G THREUTRANHIGH 10(20db)
Technology 2G - 2G 2G - 3G 2G - 4G
Reselection/Fa EUTRANQRXLEVMIN 6(-128dbm)
Follow current st return/RIM
2G - - SEND2QUTERFLAG YES
network
SPTRESEL SUPPORT
3G Ec/No>-12db and
3G - LTECELLRESELEN YES
RSCP>-102dbm for 5s
TRESEL 0
4G RSRP>- THRPRISEARCH 15(always)
4G - -
108dbm

Page 6
6
IDLE MODE :: 3G RANDOM CAMPING Category Parameter Name Recommended Value
Qqualmin U900/F2/F1=-18dB(-18)/-18dB(-18)/-16dB(-16)
 2100 Band (F1 and F2) Capacity 3G layer Qrxlevmin U900/F2/F1=-115dBm(-58) /-115dBm(-58) /-112dBm(-56)

 850 Band (U900) Coverage 3G layer Qhyst2 U900/F2/F1=2dB(1)/2dB(1)/2dB(1)

U2100 -> U900 IdleSintrasearch U900/F2/F1=10dB(5)/10dB(5)/10dB(5)


reselection IdleSintersearch U900/F2/F1=Allw ay (127)/8dB(4)/8dB(4)
ConnSintrasearch U900/F2/F1=10dB(5)/10dB(5)/10dB(5)
 Traffic to be balanced between F1 and F2 carrier
ConnSintersearch U900/F2/F1=8dB(4)/8dB(4)/8dB(4)
 2100 Layer is favored by 3 dbm IdleQoffset2sn U900/F2/F1=-3dB->U2100/3dB->U900/3dB->U900
 U900 Layer is disfavored by =3 dbm

3dBm
F2-2100 F2-2100 UMTS F1F2
F1F2 Bi-Directional Reselection with 3dB
F1=2100 F1=2100 offset from F1 to F2 and F2 to F1 vice versa

3dBm
UMTS (F1/F2)U900
U900 U900
U9002100 Bi-Directional Reselection
with 3dB offset from U900 to U2100
-3dBm

IntraRAT Bi-directional Reselection


Page 7
Idle Mode – WCDMA To Other Radio Access Technologies
Category Parameter Name Recommended Value
GERANPRI 1
3G to 2G IRAT Reselection EUTRANPRI 5
Meet following conditions on 3G Cells and 2G U2L Cell THREUTRANHIGH 10 (-128+10*2 = - 108dBm)
Cells Selection/Fast EUTRANQRXLEVMIN 6(-140+6*2=-128dBm)
 3G EcNO should be less than -16 dB Return FastReturnToLTESwitch HO_UMTS_TO_LTE_FAST_RETURN_SWITCH-
 For 2G Target Cell 1&PERFENH_PS_FAST_RETURN_LTE_SWITCH-1
 2G Rxlevel-3G RSCP>4db for 1s HoSwitch HO_UMTS_TO_LTE_FAST_RETURN_SWITCH-1
 GSM Rxlevel>-99dbm QualMeas EcN0
3G to 4G IRAT Reselection QRXLEVMIN -56
 4G RSRP should be greater than -108dBm QQUALMIN -18
3G->2G SSEARCHRAT 1(2db)
Reselection IDLEQHYST1S 2(4db)
3G U2100<->3G QRXLEVMIN(U2GNCELL) -50(-99dbm)
Technology 3G - 2G 3G - 4G
U900 QOFFSET1SN 0
2G Rxlevel-3G TRESELECTIONS 1
RSCP>4db for 1s Qqualmin U900/F2/F1=-18dB(-18)/-18dB(-18)/-16dB(-16)
2G - -
and GSM Rxlevel>- Qrxlevmin U900/F2/F1=-115dBm(-58) /-115dBm(-58) /-112dBm(-56)
99dbm Qhyst2 U900/F2/F1=2dB(1)/2dB(1)/2dB(1)
U2100 or U900 ECNO U2100 -> U900 IdleSintrasearch U900/F2/F1=10dB(5)/10dB(5)/10dB(5)
3G 3G Ec/No<-16db <-10db,start - reselection IdleSintersearch U900/F2/F1=Allway (127)/8dB(4)/8dB(4)
IdleSintersearch ConnSintrasearch U900/F2/F1=10dB(5)/10dB(5)/10dB(5)
4G RSRP > - ConnSintersearch U900/F2/F1=8dB(4)/8dB(4)/8dB(4)
4G - -
108dBm IdleQoffset2sn U900/F2/F1=-3dB->U2100/3dB->U900/3dB->U900

Page 8
Idle Mode – LTE To Other Radio Access Technologies
Category Parameter Name Recommended Value
QRxLevMin -64 (-64*2=-128 dBm)
SIntraSearch 28 (-128 + 2*28 = - 72 dBm)
4G to 2G IRAT Reselection L2L Cell Selection Qhyst 3 dB
 4G RSRP should be greater than -110dBm Qoffset 0 dB
 GSM Rx-level>-99dbm TReselEutran 1 (s)
4G to 3G IRAT Reselection
QRxLevMin -64 (-64*2=-128 dBm)
 4G RSRP should be greater than -110dBm
SNONINTRASEARCH 10(-128+10*2= -108 dBm)
 3G RSCP>-99dbm
4G to 4G IRAT Reselection THRSHSERVLOW 9(-128+9*2= -110 dBm)
Neighboring Cell RSRP should be 3dBm better CELLRESELPRIORITY L1800 = 5
than serving cell L2U Cell Selection CELLRESELPRIORITY UTRANDLARFCN: F1/F2= 3
CELLRESELPRIORITY UTRANDLARFCN: F3= 2
QRXLEVMIN 58(-58*2=-116dBm)
Technology 4G - 2G 4G - 3G 4G - 4G THRESHXLOW 6(-116dBm+6*2=-104dBm)
TRESELGERAN 1s
2G - - -
QRxLevMin -64 (-64*2=-128 dBm)
2G Rxlevel > - 3G RSCP > -
3G - SNONINTRASEARCH 10(-128+10*2= -108 dBm)
95dBm for 1s 104dBm for 1s
THRSHSERVLOW 9(-128+9*2= -110 dBm)
Neighbor Cell L2G Cell Selection CELLRESELPRIORITY L1800 = 5
4G RSRP < - 4G RSRP < - RSRP>Servin CELLRESELPRIORITY GSM = 1
4G
110dBm for 1s 110dBm for 1s g Cell RSRP THRESHXLOW 10 (-115+10*2=-95 dBm)
+ 3dB for 1s
TRESELGERAN 1s

Page 9
Dedicated Mode Strategy

Page 10
DEDICATED MODE – SUMMARY

L1800 L1800 L1800 L1800

Coverage CSFB
Coverage
CSFB CSFB
Inter-RAT HO
Inter-Frequency HO U2100 U2100
CSFB &Fast Return Coverage
PS Redirection and Quality Coverage
Coverage
Coverage U900 U900
and Quality
Coverage and Quality

GSM GSM GSM


GSM

CONNECTED MODE
2G->2G 2G->3G 2G->4G 3G->2G 3G U2100<->3G U900 3G->4G 4G->2G 4G->3G 4G->4G
PS Redirection:2G Rxlevel > -
Follow Enable Enable
2G Rxlevel >-90dbm and 2D 95dBm for 40ms
2G current the Fast the Fast
for 320ms CSFB/Flash CSFB:2G Rxlevel
network Return Return
> -95dBm for 40ms
ECNO 2D/2F=-14/-12, PS Redirection:3G RSCP > -
EcNO 2D/2F= -14/-12;RSCP RSCP 2D/2F=-105/-102, 103dBm for 320ms
3G
2D/2F=-100/-97 U2100 ECNO-U900 CSFB/Flash CSFB:3G RSCP >
ECNO >2db for 320ms -103dBm for 320ms
PS Redirection:4G RSRP < - PS Redirection:4G RSRP < - PS HO: Neighbor Cell
PS: 4G RSRP
4G 115dBm for 640ms 115dBm for 640ms RSRP>Serving Cell
> -105dBm
Page 11 RSRP + 2dB for 320ms
Connected Mode – GSM To Other Radio Access Technologies
Category Parameter Name Recommended Value
2G->3G FASTRESELECTSW YES
Reselection/Fast CELLSELECTAFTERCALLREL YES
return

2G->4G FASTRETURNMEASSPT ON
LTE
Reselection/Fast SUPPORTCSFB SUPPORT
UMTS
GSM return/RIM UTRANCMDELAYFORCSFBSW ON

Technology 2G - 2G 2G - 3G 2G - 4G
Follow
Enable the Enable the
2G current
Fast Return Fast Return
network
3G - - -
4G - - -

Page 12
Connected Mode – WCDMA To Other Radio Access Technologies
Category Parameter Name Recommended Value Technology 3G - 2G 3G U2100<->3G U900 3G - 4G
LTEMeasQuanOf3C RSRP
HO_LTE_PS_OUT_SWITCH 1
2G Rxlevel >-
HO_LTE_SERVICE_PS_OUT_SWITCH 1 2G 90dbm and 2D - -
U2L Redirection
TargetRatThdRSRP
Hystfor3C
36(36-141=-105dBm)
4dB
for 320ms  U2100/U900 to LTE, CS Fall and Fast Return
TrigTime3C
INTERRATCSTHD2DECN0
D0
-12
ECNO 2D/2F=-14/-12, is enable in bi direction
RSCP 2D/2F=-105/-
INTERRATCSTHD2FECN0 -10 EcNO 2D/2F= -
102,  U2100/U900 to LTE PS Redirection is enable
INTERRATCSTHD2DRSCP -100
3G 14/-12;RSCP -
INTERRATCSTHD2FRSCP -97
2D/2F=-100/-97
U2100 ECNO-U900 in bi direction
TARGETRATCSTHD 20(-90dbm)

3G->2G Handover
HYSTFOR2D 4(2db)
ECNO >2db for
320ms
 Inter Radio access Technology Handover is
HYSTFOR2F 4(2db)
INTERRATREPORTMODE PERIODICAL_REPORTING on one direction from U2100/U900 to GSM
HYSTFORINTERRAT 0
PS: 4G
TRIGTIME2D D320 4G - - RSRP > -
TRIGTIME2F D1280 105dBm
CIOOFFSET 0
INTERFREQREPORTMODE PERIODICAL_REPORTING

 PS redirection from UMTS to LTE


InterFreqCSThd2DEcN0 -14
InterFreqCSThd2FEcN0 -12
InterFreqCSThd2DRSCP -105 When this switch is turned on, the RNC can send LTE MEASUREMENT CONTROL message based on service
U2100 -> U900 handover InterFreqCSThd2FRSCP -102
HYSTFOR2D 4 and initiate service-based PS redirection from UMTS to LTE. When this switch is turned off, the RNC cannot initiate
HYSTFOR2F 4
TIMETOTRIG2D D320
service-based PS redirection from UMTS to LTE.
TIMETOTRIG2F D1280  Load Reshuffling (U2100/U900)
UL_UU_LDR-
NBMLdcAlgoSwitch
1&DL_UU_LDR- When the NodeB level credit load is heavy, users are assembled in priority order among all the NodeBs an
1&CELL_CODE_LDR-
1&CELL_CREDIT_LDR-1 some users are selected for LDR action in order to reduce the NodeB level credit load
IUB_LDR-
NodeBLdcAlgoSwitch 1&NODEB_CREDIT_LDR- When the NodeB Iub load is heavy, users are assembled in priority order among all the NodeBs and some users are
1&LCG_CREDIT_LDR-1
UlLdrTrigThd 55 selected for LDR action (such as BE service rate reduction) in order to reduce the NodeB Iub load
U2100/U900 LDM/LDR
UlLdrRelThd
DlLdrTrigThd
45
70
 Cell Load Control (U2100/U900)
DlLdrRelThd 60 When the Cell credit/Cell Code is heavily loaded, this algorithm reduces the credit load of the cell by using BE service r
DlLdrFirstAction CodeAdj
DlLdrSecondAction InterFreqLDHO Reduction and code tree reshuffling
DlLdrThirdAction BERateRed When the cell is heavily loaded in UL/DL, this algorithm reduces the cell load in UL/DL by using inter-frequency load ha
DlLdrFourthAction NoAct
InterFreqLDHOMethodSelectio U900/F2/F1=MEASUREHO BE service rate reduction,
n \BLINDHO\BLINDHO

Page 13
Connected Mode – LTE To Other Radio Access Technologies
Category Parameter Name Recommended Value
QoffsetFreq 0 dBm
CellIndividualOffset 0 dBm

 With the CSFB solution, when a UE initiates a CS service, the MME instructs L2L Intra-Frequency HO
CellSpecificOffset
IntraFreqHoA3Hyst
0 dBm
2 (2*0.5=1 dB)
the UE to fall back to the legacy CS network before the UE performs the IntraFreqHoA3Offset 2 (2*0.5=1 dB)

service. CSFB is a session setup procedure. UEs fall back to CS networks IntraFreqHoA3TimeToTrig 320(ms)
InterRatHoA1A2Hyst 1 dB
before CS sessions are set up, and they always stay in the CS networks InterRatHoA1A2TimeToTrig 640 ms

during the CS sessions. InterRatHoA1A2TrigQuan


InterRatHoA1ThdRsrp
RSRP
-111 dBm
 CSFB brings the following benefits: Facilitates voice services for the LTE InterRatHoA2ThdRsrp -115 dBm
InterRatHoUtranB1MeasQuan UTRAN_RSCP
network. Helps operators reduce costs by reusing legacy CS networks and L2U Redirection
InterRatHoUtranB1ThdRscp -103 dBm
not requiring IMS network deployment UtranRedirectSwitch 1

 CSFB is applicable to scenarios where the CS network of the UTRAN/GERAN UtranPsHoSwitch


INTERRATHOUTRANB1HYST
0
2dB
has the same or larger coverage area than E-UTRAN. InterRatHoUtranB1TimeToTrig 320 ms

 The network architecture for CSFB is simple. To implement CSFB, all mobile
InterRatHoA1A2Hyst 1 dB
InterRatHoA1A2TimeToTrig 640 ms
switching centers (MSCs) that serve overlapping areas with the E-UTRAN InterRatHoA1A2TrigQuan RSRP
InterRatHoA1ThdRsrp -111 dBm
coverage must be upgraded to support functions involving the SGs L2G Redirection InterRatHoA2ThdRsrp -115 dBm
interface. The SGs interface is between an MSC and a mobility management UtranRedirectSwitch 1
UtranPsHoSwitch 0
entity (MME), and functions involving the SGs interface include combined INTERRATHOGERANB1HYST 2dB

attach, combined TAU/LAU (TAU is short for tracking area update, and LAU InterRatHoGeranB1TimeToTrig 640 ms
CsfbProtectionTimer 2
is short for location area update), paging, and short message service (SMS). CSFB Common
CsfbHoPolicyCfg REDIRECTION-1&CCO_HO-0&PS_HO-0
HoAlgoSwitch:UtranCsfbSwitch 1
Technology 4G - 2G 4G - 3G 4G - 4G L2U CSFB CsfbHoUtranB1ThdRscp -103dBm
CsfbHoUtranTimeToTrig 40ms
PS Redirection:2G Rxlevel
> -95dBm for 40ms HoAlgoSwitch:GeranCsfbSwitch 1
2G - - CsfbHoGeranTimeToTrig 40ms
CSFB/Flash CSFB:2G
L2G CSFB
Rxlevel > -95dBm for 40ms CsfbHoGeranB1Thd -95dBm
SUPPORTCSFB SUPPORT
PS Redirection:3G
HoAlgoSwitch:UtranFlashCsfbSwitch 1
RSCP > -103dBm
RimSwitch:UTRAN_RIM_SWITCH 1
for 320ms
3G - - L2U Flash CSFB MmeRelease Release_R9
CSFB/Flash
CSFB:3G RSCP > - RimCodingPolicy PrivateCoding
103dBm for 320ms PROCESSSWITCH2:FAST_CS_FB_BASEDON_RIM_SWITCH 1
PS Redirection:4G RimCodingPolicy PrivateCoding
PS Redirection:4G RSRP PS HO: Neighbor Cell
RSRP < -115dBm HoAlgoSwitch:GeranFlashCsfbSwitch 1
4G < -115dBm for 640ms RSRP>Serving Cell RSRP L2G Flash CSFB
for 640ms • Network architectures for CSFB to UTRAN/GERAN RimSwitch:GERAN_RIM_SWITCH 1
+ 2dB for 320ms
RIMSUP YES

Page 14
Page 15
Template Scripts for Ufone Network Strategy

Refer to attachment for detail of template scripts:

Page 16
Thank U
THANK YOU
www.huawei.com

Copyright©2013 Huawei Technologies Co., Ltd. All Rights Reserved.


The information contained in this document is for reference purpose only, and is subject to change or withdrawal according to specific
customer requirements and conditions.

Page 17

You might also like