Professional Documents
Culture Documents
creative technology
Assignment of KNT
Submitted to:
Submitted by:
Introduction
2.cam
A. engineering cam
B. knitting cam
1. tuck cam
2. knit cam
3. miss cam
3.sinker
1.Loop forming
2.konking over
3.holding down
classification of needle
1.independent needle
2.united needle.
According to construction
A. beard needle
B. latch
C. Compound
Draw the beard needle describe parts details are given blow:
Use:
1.cricular single knitting m\c
2.warp knit tricot m\c.
3.flat bar knitting m\c
The latch needle
1.hook:-which drowse and retain the new loop
2.latch blade:-which locates the latch in the blade
3.stem:which carries the loop in the clearing or rest position .
4.which may be plain or threaded to the slot well to retain the latch.
Advantage latch
1.it is simple
2.it can draws loop easily
3.widely used in knitting section .
Cam
cam is the third primary knitting element –which covert rotary
motion into reciprocating motion .
Types
1.engineering cam
2.knitting cam
a. knit cam
b. miss cam
c. tuck cam
Knitting cam
Knitting cam :this cam help to from knit loop.
miss cam :this cam help to from miss loop.
tuck cam: this cam help to from tuck loop.
The needle loop
the simplest unit of knitted structure is loop it consist of arc or head and two
side.
1.top arc:-the upper curved position of a knitted loop is called top arc.
2.bottom arc: the lower curved position of a knitted loop is called bottom arc .
3.side limbs\wall:-the lateral part of a knitted loop of a knitted loop that cuncet
top arc to bottom arc is called side limbs \wall\arm.
Sinker:
sinker is the second primary knitting element.
actually it is a metal thin plate with an individual
or collective action approximate at right angle
from the hook side between two adjoin needle.
Faction of sinker
1.holding down
2.loop forming
3.knocking over
Sinker
Type of sinker