Professional Documents
Culture Documents
§ §
Submitted by:-
ABHINAV DAS.N.V
JIJINRAJ.P
AKHIL GEORGE
AJITH.V.K
Ô Ô
Regulated power
supply antenna
pulse Power
generator integrator vco amplifier
Triangular wave generator
ÔÔÔ§§
§
f=1/T= 1.44/[(Ra1+^Rb1)*Ca1]
DESIGN:
For f=1KHz,
Choose C = 0.1 NjF
For R1 = 1K,
O
§
Ô§
A VCO is generally a oscillator whose frequency is controlled by
the voltage given at its input.
Voltage Controlled Oscillator is implemented using an astable
multivibrator made using the IC LM555.
The varying voltage is given to the astable multivibrator using
the triangular wave .
Pin 5 is the 555's control voltage pin, which allows to directly
adjust the threshold voltages to which the pin ^/pin 6 input
voltages are compared by the 555's internal comparators.
Since the outputs of these comparators control the internal flip-
flop that toggles the output of the 555, adjusting the pin 5
control voltage also adjusts the frequency at which the 555
toggles its output.
Increasing the input voltage at pin 5 decreases the output
oscillation frequency while decreasing the input voltage increases
the output oscillation frequency.
Ô
me have,
f= 1MHz
Choose C=100pf
Then,
Choose R1=1K
Then, R^~10K
§ ÔÔ
It is used to amplify the power of the signal outputted
through the Voltage Controlled Oscillator.
Power amplification is accomplished using the transistor
^N^^^^.
This is done in order to increase the area in which the AM
signal has to be jammed.
The output of the VCO will not have enough power even
though it has an internal output amplifier in it.
The amplified signal is transmitted through a wire antenna
mhen the AM receiver receives the transmitted signal,then
the AM signal will be jammed over the area.
The coverage area can be increased by the greater power
amplification done.
§Ô§Ô §
AM jammer can be used in areas where
AM radio signals are to be jammed.
AM jammer can be upgraded to make a
cell phone jammer.
FM jammer is an improved version of AM
jammer.
Ô
me did this project ³AM JAMMER´ to show a
model of how a jammer can be made.
me have successfully completed our mini project
which can jam the AM radio signals over an area.
mhen the AM receiver receives the transmitted
signal of the AM jammer circuit, it gets jammed.
This device can be used in areas where the AM
signals are to be jammed.
The upgraded circuits of this project has many
wide applications and use in today¶s world.
R