Professional Documents
Culture Documents
Presentation outline
Purpose of lubrication system. Components of lubrication system. Lub Oil circuit Specification of oil
PMI Revision 00
To reduce the wear and tear of the rotating elements. To maintain the temperature of the bearings.
PMI Revision 00
PMI Revision 00
Main oil Pump. Auxiliary oil pump Emergency oil pump Jack oil pump Main Oil Tank
PMI Revision 00
PMI Revision 00
HPT
IPT
LPT
Gen
Injector
Vap. Ext
Filter
MOT
Oil cooler AOP
May 24, 2012
JOP
PMI Revision 00
EOP
PMI Revision 00
PMI Revision 00
Specifications of Oil:
Specific Gravity
0.852 @ 50 0C Kinematic Viscosity 28 cs Flash point 201 0C (Min) Pour Point - 6.6 0C (Max) Mechanical Impurities Nil The recommended turbine oil Servo prime-46 of IOC.
PMI Revision 00
10
PMI Revision 00
11
MOP
PMI Revision 00
12
PMI Revision 00
13
PMI Revision 00
14
PMI Revision 00
15
OIL COOLERS
To cool the lubricating oil Consists of tube nest, inner & outer shell & water boxes The cooling medium for these coolers is circulating water. The pressure of the cooling water is kept lower than that of oil to avoid its mixing with oil in the event of tube rupture. OIL TEMP. CONTROLLER for maintaining the lub oil temp at rated value by controlling the flow through the coolers.
PMI Revision 00
16
PMI Revision 00
17
OIL Filter
Basket type filter inside the oil tank For thrust bearing Duplex filter Filter changeover required after choking.
PMI Revision 00
18
PMI Revision 00
19
THANK YOU
PMI Revision 00
20