Professional Documents
Culture Documents
Falah Shidaifat, DVM, MS, PhD. Professor of Veterinary Physiology Department of Basic Biomedical Sciences Faculty of Veterinary Medicine Jordan University of Science and Technology
Hydrogen bonds
Acids, Bases, and Buffers Titration curves
Definition
Covalent Bonding: is formed when one atom shares its electron with another atom
Two atoms with unpaired electrons in their outer shells can form bond with each other by sharing electron pair
Unequal sharing of e- in a bond called Polar Covalent Bond or Polar Bond + Partial Charge indicated by delta +/ Molecules with +ve and ve ends called dipoles.
The bond is non-polar if the atoms share electrons evenly (same electronigativity)
Geometry of molecule determine its polarity Triatomic with Polar Bonds (CO2)
The bond in a molecule may be polar, but the molecule itself is not polar because of its geometry
O=C=O
Non polar Molecule
2+
The linear geometry of the molecule causes the attraction of the oxygen for the electron in one bond is cancelled out by the equal and opposite attraction for the electron by the oxygen on the other side of the molecule
Water is a dipole The partial charge that develops across the water molecule helps make it an excellent solvent.
Ionic compound such as KCl and polar (dipoles) compounds such as ethyl alcohol or acetone tend to dissolve in water
When salt is added to water the partial charges on the water molecule are attracted to the K+ and Cl- ions.
This is because of the electrostatic attraction between different charges which makes the system more stable by lowering the energy
Hydrogen Bonds
Hydrogen bond: is a non covalent bond between hydrogen which is covalently boned to a very electronegative atom such as oxygen or nitrogen and unshared pair of electron on another electronegative atom
The hydrogen of one water molecule are attracted to the oxygen from other water molecules.
Potential of water to form Hydrogen bonding affect its Solvent properties Melting point: Boiling point:
although hydrogen bonding is week and required less Energy to break it down as compared to covalent bond , its enough to raise water melting and boiling point
http://www.sumanasinc.com/webcontent/animations/content/propertiesofwater/water.html
Other biologically important hydrogen bonds Stabilizing the three dimensional structure of Proteins, DNA, RNA
Polar Vs Non-Polar
any substance that carries a net electrical charge such ionic
compounds and (dipole) are hydrophilic (water loving).
Non polar molecules such as hydrocarbons are hydrophobic (water hating) and do not dissolve in water but tend to sequester themselves from water.
Oil is a non-polar molecule. Because there is no net electrical charge across an oil molecule It is not attracted to water molecules and, therefore, it does not dissolve in water.
Molecules that have both polar (hydrophilic) and non polar hydrophobic portions are amphipathic
This compound tend to form micelles in which the polar head are in contact with water and the nonpolar tails sequestered from water
Interaction between nonpolar molecules are very week and depends on a temprorary dipols and dipols they Induced which are caused by clumping of bonding electrons at one end Van der waal interaction
Acid is a proton (hydrogen ion) donor molecule A base is a proton acceptor molecule
The strength of acids depends on the degree of dissociation in water
Strength range from complete dissociation in water for strong acid to no dissociation for week acids Any intermediate value is possible
Acid Strength
One can derive a numerical value for the strength of an acid (amount of hydrogen ion released when a given amount of acid is dissolved in water). Describe by Ka: Acid dissociation constant
Written correctly,
Molar concentration of water (55.5M) 1000 (gm of H20/L) /18 (MW of H20 )
pH
"water balance" is that the concentration of hydrogen ions is the same as the concentration of hydroxide ions ([H+] = [OH-]).
A solution with a pH from 0 to 6.9 is an acid, while a solution with a pH from 7.1 to 14 is a base (can also be called an "alkaline" solution). Acids and bases do not have an even balance of hydrogen ions with hydroxide ions. Acids have more hydrogen ions, while bases have more hydroxide ions.
pH
The values of [H+] for most solutions are small and difficult to compare. A more practical quantity is known as pH. pH = -log10[H+] Note that a difference of one pH unit implies a ten fold difference in [H+]. PH of Pure water is 7 which is neutral, whereas basic solutions have pH > 7 and acidic solution have pH < 7.
In biochemistry most acids are weak acids. These have Ka well bellow one. Therefore, pKa has been defined by analogy to PH definition:
pKa = -log10 Ka
Dr. M. khalifeh
Calculation
Calculate the pH for the following solutions: 0.01 M HCl. = 10-2 = [H+] pH= -Log [H+] = -Log [10-2] = 2
2) 0.01 M NaOH. =10-2 = [OH-] [H] [OH] = 10-14 [H] = 10-12 pH= -Log [H+] = -Log [1012] = 12
Henderson-Hasselbalch
Equation to connect Ka of any weak acid with the pH of solution containing both that acid and its conjugate base. pKa has been defined by analogy to PH: pKa
= -log10 Ka
Henderson-Hasselbalch (Contd)
Henderson-Hasselbalch equation
pH = pK a + log [Conjugate bas e] [Weak acid]
PH = PKa
when pH < pKa, the weak acid predominates (Protonated)
when pH > pKa, the conjugate base predominates (deprotonated)
The Henderson-Hasselbalch equation can be used to calculate the pH of the solution Assume 0.1 and 0.5 M (NaOH) base has been added to a fully protonated solution of acetic acid (1 mol), what is the pH?
When 0.1 mol of NaOH is added, 0.1 mol of acetic acid react with it to form 0.1 mol of acetate ion, leaving 0.9 mol of acetic acid
With 0.5 M OH added: pH = pKa + log10 [0.5 ] [0.5] pH = 4.76 + 0 pH = 4.76 = pKa
Titration Curves
an experiment in which measured mounts of acid (or base) are added to measured amounts of base (or acid) You can follow the course of reaction with pH meter
monoprotic acid releases one H+ and has 1 Pka diprotic acid releases two H+ and has 2 pka triprotic acid releases three H+ and has 3 pKa
Equivalence point
%
Inflection point
Acetate
%
Acetic Acid
Titration Curves
Inflection point: the point in an acid-base titration at which the concentration of the acid equals the concentration of conjugate base. pH = Pka Equivalence point: The point in the titration at which the acid is exactly neutralized.
The slope of each titration curve is much less near its midpoint than it is near its wing. When [HA] = [A-], the pH of the solution is relatively insensitive to the addition of strong base or strong acid.
This solution known as acid-base buffer.
The form of the curve in figure represents the behavior of any monoprotic weak acid.
Polyprotic acids
12.4
7.2
2.14
the flatness of the curve near its starting and end points in comparison with the titration curves in the Dr. previous figure. This indicats that phosphoric acid is close to a strong acid and phosphate a strong M. khalifeh base.
Buffers
buffer: tends to resists change in PH when small to moderate amounts of a strong acid or a strong base is added.
consists of a weak acid and its conjugate base Buffers can only be used effectively within one pH unit of their pKa.
Calculation
Calculate the pH when
1) 1 ml of 0.1 M HCl is added to 99 ml buffer (H2PO4-), and 2) 1 ml of 0.1 M NaOH is added to 99 ml Buffer. At PH 7 and a Pka of 7.2 the ratio of HPO-24 t0 H2PO4- is 0.63 to 1 pH = Pka + Log A-/HA
Calculation
Know that PKa= 7.2, [H2PO4-]= 0.1M, and [HPO42-]= 0.063M. 1) When HCl added. All H+ will be used up HPO42- + H+ 0.063 M 10 -7 M 0.063 M 10 -3 M(0.1/100) = 0.001) 0.062 M (-0.001) ? H2PO40.1 M 0.1 M 0.101 (+0.001)
Before addition of acid Acid added- no reaction After acid react with HPO42-
Calculation
2) When OH added. H2PO4- + OHBefore addition of base Base added- no reaction
0.1 M 0.1 M
(-0.001)
10 -7 M 10 -3 M
0.099 M
0.064M
Buffer Range
A buffer is effective in a range of about +/- 1 pH unit of the pKa of the weak acid
When pH increased by 1 unit from Pka the ratio of Base to acid increased by 10 units When pH increased by 2 unit from Pka the ratio of Base to acid increased by 100 units
Buffer Capacity
Buffer capacity is related to the ratio of the weak acid and its conjugate base
the greater the concentration of the weak acid and its conjugate base, the greater the buffer capacity
Respiration decrease acidity of blood Hyperventilation removes a lot of CO2 and raises pH of blood (alkalosis)
Acid-base balance
Our bodies are extremely sensitive to blood pH. Any blood pH more acidic than 6.8 or more basic than 8.0 causes death. Maintaining pH within narrow limits is vital for survival. Altered acid-base balance affects
Osmolarity/fluid volume enzyme action transport process membrane potential nerve and muscle action.
Because acids are produced in the course of normal metabolism, the body must have buffers to maintain the pH.
Dr. M. khalifeh
Selecting a Buffer
The following are typical criteria
suitable pKa no interference with the reaction or detection of the assay suitable ionic strength suitable solubility
Laboratory Buffers